Search NASA⌕ Search

SEARCH · Search NASA

Results for “sol-gel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

130 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

CuCr 2 O 4 particle growth and evolution across sol–gel routes and calcination profiles

CuCr 2 O 4 spinel is a candidate coating material for central receivers in concentrating solar power to protect structural alloys against high temperature oxidation and related degradation. Coating performance and microstructure of dip-coated and sintered coatings is dictated by the initial particle size of the CuCr 2 O 4 and sintering temperature, but can be compromised by particle agglomeration. Here in this study, sub-micron particles were synthesised through the Pechini and modified Pechini sol–gel methods. Phase composition was confirmed via X-ray diffraction. Particle growth during calcination of the nanoparticles at different temperatures (650°C, 750°C, 850°C) and times (between 1 and 24 h) was measured via laser diffraction and scanning electron microscopy. The modified Pechini method displayed evidence of smaller particle sizes and greater agglomeration. The kinetics of particle growth observed are consistent with a diffusion limited inhibited grain growth model.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Deposition and dielectric characterization of highly oriented V 2 O 5 thin films

The possibility of ferroelectricity in orthorhombic V 2 O 5 thin flms was investigated. Films were deposited via either a chemical solution deposition (CSD) route or by RF magnetron sputtering. Highly (001) oriented V 2 O 5 flms were achieved with both deposition routes at temperatures as low as 300°C. No evidence for ferroelectricity was observed, even in flms which had been doped to provide local nuclei for polarization reversal. Loss originated from mid-gap trap states stemming from oxygen vacancies that were observed with photoluminescence, supplemented by piezoresponse force microscopy measurements. Furthermore, these trap states may have helped mimic ferroelectricity in previous reports on V 2 O 5 .

36 MATERIALS SCIENCE↗
DOE OSTI2023

Silver nanowire-indium zinc oxide composite flexible transparent conducting electrodes made by spin-coating and photonic curing

Flexible transparent conducting electrodes (TCE) play a critical role in modern technologies. Eliminating the high-temperature annealing of vacuum- or solution-deposited films will increase production throughput and lower the cost of the final products. Photonic curing uses intense pulses of broadband light to induce material transformations instead of heat. In this work, we combine solution deposition and photonic curing, replacing thermal annealing, to fabricate flexible composite TCE films on plastic polyethylene terephthalate (PET) substrates. The composite TCE films are composed of spin-coated silver nanowire-indium zinc oxide layers. Further, the TCE films’ electrical, optical, and morphological properties are investigated and compared to those of commercially available PET/TCE. A sheet resistance of 15 Ω/sq and an average transmittance from 400 – 700 nm of 77% are achieved with the spin-coated and photonic-cured composite flexible TCE films.

14 SOLAR ENERGY↗
DOE OSTI2020

Electrospun Hybrid Perfluorosulfonic Acid/Sulfonated Silica Composite Membranes

Electrospinning was employed to fabricate composite membranes containing perfluorosulfonic acid (PFSA) ionomer, poly(vinylidene fluoride) (PVDF) reinforcement and a sulfonated silica network, where the latter was incorporated either in the PFSA matrix or in the PVDF fibers. The best membrane, in terms of proton conductivity, was made by incorporating the sulfonated silica network in PFSA fibers (Type-A) while the lowest conductivity membrane was obtained when sulfonated silica was incorporated into the reinforcing PVDF fibers (Type-B). A Type-A membrane containing 65 wt.% PFSA with an embedded sulfonated silica network (at 15 wt.%) and with 20 wt.% PVDF reinforcing fibers proved superior to the pristine PFSA membrane in terms of both the proton conductivity in the 30–90% RH at 80 °C (a 25–35% increase) and lateral swelling (a 68% reduction). In addition, it was demonstrated that a Type-A membrane was superior to that of a neat 660 EW perfluoroimide acid (PFIA, from 3M Co.) films with respect to swelling and mechanical strength, while having a similar proton conductivity vs. relative humidity profile. This study demonstrates that an electrospun nanofiber composite membrane with a sulfonated silica network added to moderately low EW PFSA fibers is a viable alternative to an ultra-low EW fluorinated ionomer PEM, in terms of properties relevant to fuel cell applications.

36 MATERIALS SCIENCE↗