Search NASA⌕ Search

SEARCH · Search NASA

Results for “space grid”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

WRF Hindcasts of Cold Front Passages over the ARM Eastern North Atlantic Site: A Sensitivity Study

The present study explores the ability of the Weather Research and Forecasting (WRF) Model to accurately reproduce the passage of extratropical cold fronts at the DOE-ARM Eastern North Atlantic (ENA) observation site on the Azores Islands. An analysis of three case studies is performed in which the impact of the WRF domain size, position of the model boundary relative to the ENA site, grid spacing, and spectral nudging conditions are explored. The results from these case studies indicate that model biases in the timing and duration of cold front passages change with the distance between the model domain boundary and the ENA site. For these three cases, if the western model boundary is further than 1500 km from the site, the front becomes too meridional and fails to reach the site, making 1000 km or 1500 km the optimal distances. In contrast, integrations with small distances (e.g., 500 km) between the site and domain boundaries have inadequate spatial spin-up, i.e. the domain is too small for the model to properly stabilize. For all 3 cases, regardless of domain size, the model has biases in its upper-level circulation that impact the position and timing of the front. However, this issue is most serious for 4000 km2 domains and larger. For these domains, prolonged spectral nudging can correct cold front biases. As such, this analysis provides a framework to optimize the WRF model configuration necessary for a realistic hindcast of a cold front passage at a fixed location centered in a domain as large as computationally possible.

Faycal Lamraoui↗

Numerical calculation of turbulent boundary layers including suction or injection with binary diffusion.

The modelling of turbulent transport processes with an eddy viscosity representation of the inner, wall region for cases with suction or injection is considered in detail. It is shown how the van Driest solid wall model can be logically extended for such cases. Further, a new inductive model is developed. Finite difference calculations using the new inductive model are shown to be in good agreement with experimental data over a wide range of conditions. Lastly, a new method for calculating the wall shear within a finite difference solution is developed. This procedure greatly relaxes the requirement for fine grid spacing in the vertical direction.

Schetz, J. A.↗

Thermochemical nonequilibrium in atomic hydrogen at elevated temperatures

A numerical study of the nonequilibrium flow of atomic hydrogen in a cascade arc was performed to obtain insight into the physics of the hydrogen cascade arc. A rigorous mathematical model of the flow problem was formulated, incorporating the important nonequilibrium transport phenomena and atomic processes which occur in atomic hydrogen. Realistic boundary conditions, including consideration of the wall electrostatic sheath phenomenon, were included in the model. The governing equations of the asymptotic region of the cascade arc were obtained by writing conservation of mass and energy equations for the electron subgas, an energy conservation equation for heavy particles and an equation of state. Finite-difference operators for variable grid spacing were applied to the governing equations and the resulting system of strongly coupled, stiff equations were solved numerically by the Newton-Raphson method.

Scott, R. K.↗

Design, fabrication, test and delivery of a K-band antenna breadboard model

The results of a research effort to develop a Ku-Band single channel monopulse antenna with significant improvements in efficiency and bandwidth are reported. A single aperture, multimode horn, utilized in a near field Cassegrainian configuration, was the technique selected for achieving the desired efficiency and bandwidth performance. In order to provide wide polarization flexibility, a wire grid, space filter polarizer was developed. A solid state switching network with appropriate driving electronics provides the receive channel sum and difference signal interface with an existing Apollo type tracking electronics subsystem. A full scale breadboard model of the antenna was fabricated and tested. Performance of the model was well within the requirements and goals of the contract.

Source record↗

Satellite radar scatterometry

Questions of air-sea interaction are considered along with the theoretical results of an analysis of radar backscatter from the ocean and experimental measurements of radar backscatter. Scatterometer design specifications have been established based on user requirements of accuracy, swath width, resolution cell size, and a 100 km grid spacing of the measurements. The instrument errors associated with the fan beam mode of operation are shown in a graph.

Swift, C. T.↗

An operational satellite scatterometer for wind vector measurements over the ocean

Performance requirements and design characteristics of a microwave scatterometer wind sensor for measuring surface winds over the oceans on a global basis are described. Scatterometer specifications are developed from user requirements of wind vector measurement range and accuracy, swath width, resolution cell size and measurement grid spacing. A detailed analysis is performed for a baseline fan-beam scatterometer design, and its performance capabilities for meeting the SeaSat-A user requirements. Various modes of operation are discussed which will allow the resolution of questions concerning the effects of sea state on the scatterometer wind sensing ability and to verify design boundaries of the instrument.

Grantham, W. L.↗

Radiation pattern synthesis of planar antennas using the iterative sampling method

A synthesis method is presented for determining an excitation of an arbitrary (but fixed) planar source configuration. The desired radiation pattern is specified over all or part of the visible region. It may have multiple and/or shaped main beams with low sidelobes. The iterative sampling method is used to find an excitation of the source which yields a radiation pattern that approximates the desired pattern to within a specified tolerance. In this paper the method is used to calculate excitations for line sources, linear arrays (equally and unequally spaced), rectangular apertures, rectangular arrays (arbitrary spacing grid), and circular apertures. Examples using these sources to form patterns with shaped main beams, multiple main beams, shaped sidelobe levels, and combinations thereof are given.

Stutzman, W. L.↗

Sasaki's variational optimization analysis of temperature and moisture advection in a severe storm environment

Temperature and moisture advection patterns of dry air intrusion were analyzed by a variational optimization method to relate mesoscale advection to a severe thunderstorm environment. The analysis results presented here were obtained from a case study, May 26, 1973, when a tornado squall line developed in Oklahoma in conjunction with a clearly delineated dry air intrusion. Observations from the synoptic upper air network were used for inputs of horizontal wind components, potential temperature, and mixing ratio at each 50 mb increment from 950 to 100 mb. An objective analysis was performed to assign values of the variables to grid points of a 15 x 14 horizontal grid with approximate 125 km grid spacing at each pressure level. After the analysis the data fields were smoothed using a variational formalism.

Mcfarland, M. J.↗

Evaluation of subgrid-scale turbulence models using a fully simulated turbulent flow

An exact turbulent flow field was calculated on a three-dimensional grid with 64 points on a side. The flow simulates grid-generated turbulence from wind tunnel experiments. In this simulation, the grid spacing is small enough to include essentially all of the viscous energy dissipation, and the box is large enough to contain the largest eddy in the flow. The method is limited to low-turbulence Reynolds numbers, in our case R sub lambda = 36.6. To complete the calculation using a reasonable amount of computer time with reasonable accuracy, a third-order time-integration scheme was developed which runs at about the same speed as a simple first-order scheme. It obtains this accuracy by saving the velocity field and its first-time derivative at each time step. Fourth-order accurate space-differencing is used.

Clark, R. A.↗

The SeaSat-A satellite scatterometer

This paper describes the methods used to develop performance requirements and design characteristics for the microwave scatterometer (SASS) ocean-surface wind sensor on the NASA SeaSat-A satellite. Wind vector measurement requirements from the SeaSat user community (wind speed and direction accuracy, resolution cell size, grid spacing, and swath width) define instrument characteristics. The resulting scatterometer is designed for 14.6 GHz using four fan beam antennas to measure wind speed and direction over a 1000-km swath width with a resolution cell size 50 x 50 km. Results show scatterometer accuracy satisfies user requirements for wind speed from 4 m/s to greater than 24 m/s for the nominal SeaSat-A orbit of 790 km altitude, 108 deg inclination, and 0.001 eccentricity.

Grantham, W. L.↗

Design and testing of the navigation model for three axis stabilized earth oriented satellites applied to the ATS-6 satellite image data base

An earth edge methodology has been developed to account for the relative attitude changes between successive ATS-6 images which allows reasonable high quality wind sets to be produced. The method consists of measuring the displacements of the right and left infrared earth edges between successive ATS-6 images as a function of scan line; from these measurements the attitude changes can be deduced and used to correct the apparent cloud displacement measurements. The wind data sets generated from ATS-6 using the earth-edge methodology were compared with those derived from the SMS-1 images (and model) covering the same time period. Quantitative comparisons for low level trade cumuli were made at interpolated uniformly spaced grid points and for selected individual comparison clouds. Selected individual comparison clouds, the root-mean-square differences for the U and V components were 1.0 and 1.2 meters per second with a maximum wind direction difference of 15 deg.

Kuhlow, W. W.↗

Numerical spatial marching techniques for estimating duct attenuation and source pressure profiles

A numerical method was developed that could predict the pressure distribution of a ducted source from far field pressure inputs. Using an initial value formulation, the two-dimensional homogeneous Helmholtz wave equation (no steady flow) was solved using explicit marching techniques. The Von Neumann method was used to develop relationships which describe how sound frequency and grid spacing effect numerical stability. At the present time, stability considerations limit the approach to high frequency sound. Sample calculations for both hard and soft wall ducts compare favorably to known boundary value solutions. In addition, assuming that reflections in the duct are small, this initial value approach was successfully used to determine the attenuation of a straight soft wall duct. Compared to conventional finite difference or finite element boundary value approaches, the numerical marching technique is orders of magnitude shorter in computation time and required computer storage and can be easily employed in problems involving high frequency sound.

Baumeister, K. J.↗

The Seasat-A satellite scatterometer

This report describes the methods used to develop performance requirements and design characteristics of a microwave scatterometer wind sensor planned for Seasat-A. User requirements such as wind speed accuracy, resolution cell size, grid spacing, and swath width of the measurements formed the basis for defining instrument characteristics. Results are presented that show scatterometer accuracy as a function of orbit position satisfies User requirements for nominal orbit conditions.

Grantham, W. L.↗

Numerical spatial marching techniques for estimating duct attenuation and source pressure profiles

A numerical method is developed that could predict the pressure distribution of a ducted source from far-field pressure inputs. Using an initial value formulation, the two-dimensional homogeneous Helmholtz wave equation (no steady flow) is solved using explicit marching techniques. The Von Neumann method is used to develop relationships which describe how sound frequency and grid spacing effect numerical stability. At the present time, stability considerations limit the approach to high frequency sound. Sample calculations for both hard and soft wall ducts compare favorably to known boundary value solutions. In addition, assuming that reflections in the duct are small, this initial value approach is successfully used to determine the attenuation of a straight soft wall duct. Compared to conventional finite difference or finite element boundary value approaches, the numerical marching technique is orders of magnitude shorter in computation time and required computer storage and can be easily employed in problems involving high frequency sound.

Baumeister, K. J.↗

Explicit numerical formulas of improved stability and accuracy for the solution of parabolic equations

A class of explicit numerical formulas which involve next nearest neighbor as well as nearest neighbor points are explored in this paper. These formulas are formal approximations to the linear parabolic partial-differential equation of first order in time and second order in distance. It was found that some of these formulas can employ time steps as much as four times that for the conventional explicit technique without becoming unstable. Others showed improved accuracy for a given time step and spatial grid spacing. One formula achieved a steady-state solution of specified accuracy for an example problem in less than 4 percent of the total computational time required by the conventional explicit technique.

Olstad, W. B.↗

On some theoretical and practical aspects of multigrid methods

A description and explanation of a simple multigrid algorithm for solving finite element systems is given. Numerical results for an implementation are reported for a number of elliptic equations, including cases with singular coefficients and indefinite equations. The method shows the high efficiency, essentially independent of the grid spacing, predicted by the theory.

Nicolaides, R. A.↗

Grid generation using differential systems techniques

The errors in approximating the derivatives of a function by traditional central differences at grid points of a curvilinear coordinate system were examined. The implications concerning the accuracy of the numerical solution of a partial differential equation are explained by considering several numerical examples. Although this study only considers the two dimensional case, the techniques and implications are equally valid for three dimensional grids. An interesting feature of the error analysis is its simplicity. Most of the results follow by merely working with the truncation terms of some power series expansion. These series expansions also give rise to higher order difference approximations which can significantly reduce error when the grid spacing changes rapidly, as might be the case in problems with shock waves or thin boundary layers.

Thompson, J. F.↗