Search NASA⌕ Search

SEARCH · Search NASA

Results for “spirals”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Spiral Structure and Differential Dust Size Distribution in the LkH(alpha) 330 Disk

Dust trapping accelerates the coagulation of dust particles, and, thus, it represents an initial step toward the formation of planetesimals. We report H-band (1.6 microns) linear polarimetric observations and 0.87 mm interferometric continuum observations toward a transitional disk around LkH(alpha) 330. As a result, a pair of spiral arms were detected in the H-band emission, and an asymmetric (potentially arm-like) structure was detected in the 0.87 mm continuum emission. We discuss the origin of the spiral arm and the asymmetric structure and suggest that a massive unseen planet is the most plausible explanation. The possibility of dust trapping and grain growth causing the asymmetric structure was also investigated through the opacity index (beta) by plotting the observed spectral energy distribution slope between 0.87 mm from our Submillimeter Array observation and1.3 mm from literature. The results imply that grains are indistinguishable from interstellar medium-like dust in the east side (beta = 2.0 +/- 0.5) but are much smaller in the west side beta = 0.7+0.5 -0.4, indicating differential dust size distribution between the two sides of the disk. Combining the results of near-infrared and submillimeter observations, we conjecture that the spiral arms exist at the upper surface and an asymmetric structure resides in the disk interior. Future observations at centimeter wavelengths and differential polarization imaging in other bands (Y-K) with extreme AO imagers are required to understand how large dust grains form and to further explore the dust distribution in the disk.

polarimetric observations↗
NASA NTRS2018

Toward Cooling Uniformity: Investigation of Spiral, Sweeping Holes, and Unconventional Cooling Paradigms

Surface infrared thermography, hotwire anemometry, and thermocouple surveys were performed on two new film cooling hole geometries: spiral/rifled holes and fluidic sweeping holes. Ways to quantify the efficacy of novel cooling holes that are asymmetric, not uniformly spaced or that show variation from hole to hole are presented. The spiral holes attempt to induce large-scale vorticity to the film cooling jet as it exits the hole to prevent the formation of the kidney shaped vortices commonly associated with film cooling jets. The fluidic sweeping hole uses a passive in-hole geometry to induce jet sweeping at frequencies that scale with blowing ratios. The spiral hole performance is compared to that of round holes with and without compound angles. The fluidic hole is of the diffusion class of holes and is therefore compared to a 777 hole and square holes. A patent-pending spiral hole design showed the highest potential of the nondiffusion type hole configurations. Velocity contours and flow temperature were acquired at discreet cross-sections of the downstream flow field. The passive fluidic sweeping hole shows the most uniform cooling distribution but suffers from low span-averaged effectiveness levels due to enhanced mixing. The data was taken at a Reynolds number of 11,000 based on hole diameter and freestream velocity. Infrared thermography was taken for blowing ratios of 1.0, 1.5, 2.0, and 2.5 at a density ratio of 1.05. The flow inside the fluidic sweeping hole was studied using 3D unsteady RANS. A section on ideas for future work is included that addresses issues of quantifying cooling uniformity and provides some ideas for changing the way we think about cooling such as changing the direction of cooling or coupling acoustic devices to cooling holes to regulate frequency.

Shyam, Vikram↗
NASA NTRS2018

The Complex Morphology of the Young Disk MWC 758: Spirals and Dust Clumps around a Large Cavity

We present Atacama Large Millimeter Array observations at an angular resolution of 0 1 - 0 2 of the disk surrounding the young Herbig Ae star MWC758. The data consist of images of the dust continuum emission recorded at 0.88 millimeter, as well as images of the 13CO and C18O J = 3-2 emission lines. The dust continuum emission is characterized by a large cavity of roughly 40 au in radius which might contain a mildly inner warped disk. The outer disk features two bright emission clumps at radii of ~47 and 82 au that present azimuthal extensions and form a double-ring structure. The comparison with radiative transfer models indicates that these two maxima of emission correspond to local increases in the dust surface density of about a factor 2.5 and 6.5 for the south and north clumps, respectively. The optically thick 13CO peak emission, which traces the temperature, and the dust continuum emission, which probes the disk mid plane, additionally reveal two spirals previously detected in near-IR at the disk surface. The spirals seen in the dust continuum emission present, however, a slight shift of a few au toward larger radii and one of the spirals crosses the south dust clump. Finally, we present different scenarios to explain the complex structure of the disk.

Atacama Large Millimeter Array↗
NASA NTRS2016

Three-Dimensional Generalized Logarithmic Spirals

The family of generalized logarithmic spirals including a control parameter is extended to the three-dimensional case. The in-plane motion is decoupled from the out-of-plane motion in such a way that the integrals of motion found in the planar problem are still preserved in the three-dimensional case. Designing a low-thrust orbit transfer decomposes in two stages: first, orbits are projected on a reference plane and the planar transfer is solved with a generalized logarithmic spiral. Second, the out-of-plane component of the motion is included in order to target the final orbit. The projection of the three-dimensional transfer orbit on the reference plane is a generalized logarithmic spiral. Arbitrary shape-based laws for the 3D motion can be considered. This paper explores a polynomial and a Fourier series shaping method, together with a polynomial steering law. A fictitious low-thrust sample return mission to Ceres is designed to show the versatility of the method.

Roa, Javier↗
NASA NTRS2018

Resolving Faint Structures in the Debris Disk Around TWA 7* Tentative Detections of an Outer Belt, a Spiral Arm, and a Dusty Cloud

Context. Debris disks are the intrinsic by-products of the star and planet formation processes. Most likely due to instrumental limitations and their natural faintness, little is known about debris disks around low mass stars, especially when it comes to spatially resolved observations. Aims. We present new VLT/SPHERE IRDIS dual-polarization imaging (DPI) observations in which we detect the dust ring around the M2 spectral type star TWA 7. Combined with additional angular differential imaging observations we aim at a fine characterization of the debris disk and setting constraints on the presence of low-mass planets. Methods. We modeled the SPHERE DPI observations and constrain the location of the small dust grains, as well as the spectral energy distribution of the debris disk, using the results inferred from the observations, and performed simple N-body simulations. Results. We find that the dust density distribution peaks at ~0.72′′ (25 au), with a very shallow outer power-law slope, and that the disk has an inclination of ~13° with a position angle of ~91° east of north. We also report low signal-to-noise ratio detections of an outer belt at a distance of ~1.5′′ (~52 au) from the star, of a spiral arm in the southern side of the star, and of a possible dusty clump at 0.11′′. These findings seem to persist over timescales of at least a year. Using the intensity images, we do not detect any planets in the close vicinity of the star, but the sensitivity reaches Jovian planet mass upper limits. We find that the SED is best reproduced with an inner disk at ~0.2′′ (~7 au) and another belt at 0.72′′ (25 au). Conclusions. We report the detections of several unexpected features in the disk around TWA 7. A yet undetected 100 Solar Mass planet with a semi-major axis at 20−30 au could possibly explain the outer belt as well as the spiral arm. We conclude that stellar winds are unlikely to be responsible for the spiral arm.

VLT/SPHERE IRDIS↗
NASA NTRS1965

Spiraled channels improve heat transfer between fluids

Spiral flow channels increase heat transfer between two fluids in a countercurrent heat exchanger of given volume. The heat exchanger is constructed by connecting a spiraled bellows-shaped ducting between two concentric cylindrical tubes.

Higa, W.↗
NASA NTRS1968

On a property of logarithmic spirals.

Logarithmic spirals, analyzing curve on surface of cylinder, existence and conditions of ellipticity conditions, determining curve transformation into ellipse based on logarithmic spiral properties

Vinh, N. X.↗
NASA NTRS1971

Millimeter-wave generation with spiraling electron beams

The feasibility of using the interaction between a thin, solid, spiraling electron beam of 10 to 20 kV energy and a microwave cavity to generate watts of CW millimeter-wave power was investigated. Experimental results are given for several prototype devices operating at 9.4 GHz and at 94 GHz. Power outputs of 5 W, and electronic efficiencies near 3%, were obtained at X band, and moderate gain was obtained at 94 GHz. The small-signal theory gives a good fit to the X-band data, and the device behavior at 94 GHz is as expected from the given beam characteristics. The performance is limited chiefly by the velocity spread in the spiraling electron beam, and once this can be brought under control, high-power generation of millimeter waves appears quite feasible with this type of device.

Kulke, B.↗
NASA NTRS1973

Alfven waves in spiral interplanetary field

A theoretical study is presented of the Alfven waves in the spiral interplanetary magnetic field. The Alfven waves under consideration are arbitrary, large amplitude, non-monochromatic, microscale waves of any polarization. They superpose on a mesoscale background flow of thermally anisotropic plasma. Using WKB approximation, an analytical solution for the amplitude vectors is obtained as a function of the background flow properties: density, velocity, Alfven speed, thermal anisotropy, and the spiral angel. The necessary condition for the validity of the WKB solution is discussed. The intensity of fluctuations is calculated as a function of heliocentric distance. Relative intensity of fluctuations as compared with the magnitude of the background field has its maximum in the region near l au. Thus outside of this region, the solar wind is less turbulent.

Whang, Y. C.↗
NASA NTRS1972

IC 3576 - An unusual spiral galaxy in Virgo.

The possible association of an X-ray source with the galaxy IC 3576 was investigated in a program of optical observations of this galaxy. The observations show that patches and condensations belonging to the galaxy are distributed in a nonrandom, spiral fashion. This distinctive morphology corresponds to the dwarf spiral of the second type discussed by van den Bergh (1959). Radio observations are also considered, giving attention to a 21-cm emission due to neutral hydrogen in IC 3576. It is pointed out that the evidence at this time that the X-ray source in Virgo corresponds to IC 3576 is positional only.

Margon, B.↗
NASA NTRS1973

Star formation and evolution in spiral galaxies.

Evolutionary models for regions of M31 and M33 and the solar neighborhood are based on a stellar birthrate suggested by the dynamics of spiral structure: we assume that stars are formed very efficiently until the gas content reaches equilibrium at its present value, which takes about 1 b.y.; thereafter, the birthrate just equals the rate at which gas enters the system from stellar mass-loss or infall of intergalactic matter. Each model represents an average around a cylindrical-shell-shaped region, which is homogeneous and closed except for possible infall. The disk and spiral-arm populations only are considered. Each star is followed in the H-R diagram from the main sequence to death as an invisible remnant. Integrated magnitudes, colors, mass-to-light ratio (M/L), gas content, helium and metal abundance (Z), are computed in steps of 1 b.y.

Quirk, W. J.↗
NASA NTRS1974

Spiral groove seal

Mating flat surfaces inhibit leakage of a fluid around a stationary shaft. A spiral groove produces a pumping action toward the fluid when the shaft rotates. This prevents leakage while a generated hydraulic lifting force separates the mating surfaces to minimize wear. Provision is made for placing these spiral grooves in communication with the fluid to accelerate the generation of the hydraulic lifting force.

Ludwig, L. P.↗
NASA NTRS1973

Alfven waves in spiral interplanetary field

This paper presents a theoretical study of the Alfven waves in the spiral interplanetary magnetic field. The Alfven waves under consideration are arbitrary large-amplitude nonmonochromatic microscale waves of any polarization. They superpose on a mesoscale background flow of thermally anisotropic plasma. When the WKB approximation is used, an analytical solution for the amplitude vectors is obtained as a function of the background flow properties: density, velocity, Alfven speed, thermal anisotropy, and the spiral angle. The relative intensity of fluctuations compared with the magnitude of the background field has its maximum in the region near 1 AU. Thus outside of this region the solar wind is less turbulent. Owing to attenuation of microscale Alfven waves, fluctuation energy is converted into the kinetic energy of the solar wind.

Whang, Y. C.↗
NASA NTRS1976

The problem of spiral galaxies and satellite radio sources

Regions 2-deg x 2-deg in area centered on four spiral galaxies were scanned with the Goldstone 64-m antenna in search of satellite radio sources at 2295 MHz. Four control regions of equal area but free of galaxies brighter than 13th magnitude were also scanned. No significant excess in the number density of sources with flux densities greater than 0.10 Jy relative to the control fields was found. A detailed comparison is made between the results of this program and the results of previous investigators. In particular, attention is directed to the potentially important implications of an investigation by Tovmasyan (1968), who searched a large number of spirals and found evidence that a small percentage of them apparently have radio satellites located up to 20 arcmin from the central galaxy. Fifteen sources selected from Tovmasyan's list of 43 satellite sources were measured. The present results confirm his positions and relative flux densities for each of the sources.

Arp, H.↗
NASA NTRS1976

Predominance of two-armed spirals

A physical process accounts for the origin and widespread occurrence of two-armed spiral patterns with a high degree of symmetry extending from the nucleus to the outermost part of a galaxy. Self-gravitating systems, starting from a wide variety of initial conditions, settle down into twofold symmetries through a sequence of forms that were identified in numerical experiments. Twofold symmetries rarely develop directly. Instead, the systems pass through a sequence of more complicated shapes. The computer experiments and the sequence leading to twofold symmetries are described. At the end of this process, a two-armed spiral density wave with a 'grand design' has been set up in the galaxy, and the stage has been set for some mechanism, such as that of Lin and Shu (1971), to take over to assure a long lifetime for the pattern.

Miller, R. H.↗
NASA NTRS1976

Guidance logic for spiral approaches

A spiral approach concept is proposed as a standard procedure for independent, commercial VTOL operations conducted in close proximity to CTOL operations. A guidance logic is developed for this VTOL application, although the results may be applicable to curved approaches by STOL or CTOL aircraft as well. The guidance concept attempts to maintain constant airspeed along a fixed radius nominal spiral. The presence of wind requires a continuous variation in bank angle and heading rate to remain on the desired path. Linear perturbation analysis is used to select satisfactory feedback gains for commanded bank angle, longitudinal acceleration and vertical speed. A wind estimator detects differences between the predicted and observed wind and uses the result to modify the nominal control. For 4-D guidance the nominal time must be computed as a function of turn angle, which requires the solution of an elliptic integral. Time-varying longitudinal accelerations are necessary for 4-D guidance when the observed wind differs from the predicted wind, or when wind shear is present. The logic and the linear feedback gains have been tested in a nonlinear simulation. Results have generally verified the performance predicted by linear analysis.

Hollister, W. M.↗