Search NASA⌕ Search

SEARCH · Search NASA

Results for “stack sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Use of a Reduced Order Model (ROM) to Simulate SOFC Performance in System Models

Numerical models for design and optimization of fuel cell-based power generation systems require an accurate representation of the SOFC stack performance over a wide range of operating conditions. Response surface techniques were used with detailed SOFC stack model results to create a computationally efficient reduced order model (ROM) of the stack that retains desirable information about its internal state, which can be important in system optimization studies to preclude operation under off-design conditions that can adversely impact overall reliability. A tool was developed to randomly sample selected input parameters, obtain stack solutions for these sampled cases, perform regression to obtain response surfaces for stack performance and other metrics of interest, and export the response surfaces as a ROM. The ROM was then successfully implemented in an Aspen Plus® system model for a natural gas fuel cell (NGFC) power system. Additional work to characterize the ROM’s approximation error is ongoing.

Modeling & Simulation↗

Measurement of the Tracer Gradient and Sampling System Bias of the Hot Fuel Examination Facility Stack Air Monitoring System

This report describes tracer gas uniformity and bias measurements made in the exhaust air discharge of the Hot Fuel Examination Facility at Idaho National Laboratory. The measurements were a follow-up on earlier measurements which indicated a lack of mixing of the two ventilation streams being discharged via a common stack. The lack of mixing is detrimental to the accuracy of air emission measurements. The lack of mixing was confirmed in these new measurements. The air sampling probe was found to be out of alignment and that was corrected. The suspected sampling bias in the air sample stream was disproved.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Imprints of gravitational lensing in the Planck cosmic microwave background data at the location of W I S E × SCOS galaxies

We detect weak gravitational lensing of the cosmic microwave background at the location of the WISE × SuperCOSMOS (WISE × SCOS) galaxies using the publicly available Planck lensing convergence map. By stacking the lensing convergence map at the position of 12.4 million galaxies in the redshift range 0.1 ≤ $\mathscr{z}$ ≤ 0.345, we find the average mass of the galaxies to be $M_{200_{crit}}$ = 6.25 ± 0.6 × 10 12 M$_⊙$. The null hypothesis of no lensing is rejected at a significance of 17$σ$ . We split the galaxy sample into three redshift slices, each containing ~4.1 million objects, and obtain lensing masses in each slice of 4.18 ± 0.8, 6.93 ± 0.9, and 18.84 ± 1.2 × 10 12 M$_⊙$. Our results suggest a redshift evolution of the galaxy sample masses, but this apparent increase might be due to the preferential selection of intrinsically luminous sources at high redshifts. The recovered mass of the stacked sample is reduced by 28% when we remove the galaxies in the vicinity of galaxy clusters with mass $M_{200_{crit}}$ = 2 × 10 14 M ⊙ . We forecast that upcoming CMB surveys can achieve 5% galaxy mass constraints over sets of 12.4 million galaxies with $M_{200_{crit}}$ = 1 × 10 12 M ⊙ at $z$ = 1 .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Nature of the galaxies on top of quasars producing Mg ii absorption

ABSTRACT Quasar–galaxy pairs at small separations are important probes of gas flows in the disc–halo interface in galaxies. We study host galaxies of 198 Mg ii absorbers at 0.39 ≤ zabs ≤ 1.05 that show detectable nebular emission lines in the Sloan Digital Sky Survey (SDSS) spectra. We report measurements of impact parameter (5.9 ≤ D [kpc] ≤ 16.9) and absolute B-band magnitude (−18.7 ≤ MB ≤ −22.3 mag) of host galaxies of 74 of these absorbers using multiband images from the Dark Energy Spectroscopic Instrument (DESI) Legacy Imaging Survey, more than doubling the number of known host galaxies with D ≤ 17 kpc. This has allowed us to quantify the relationship between Mg ii rest equivalent width (W2796) and D, with best-fitting parameters of W2796 (D = 0) = 3.44 ± 0.20 Å and an exponential scale length of 21.6$^{+2.41}_{-1.97}\, \mathrm{ kpc}$. We find a significant anticorrelation between MB and D, and MB and W2796, consistent with the brighter galaxies producing stronger Mg ii absorption. We use stacked images to detect average emissions from galaxies in the full sample. Using these images and stacked spectra, we derive the mean stellar mass (9.4 ≤ log(M*/M⊙) ≤ 9.8), star formation rate (2.3 ≤ SFR [M⊙ yr−1] ≤ 4.5), age (2.5–4 Gyr), metallicity (12 + log(O/H) ∼ 8.3), and ionization parameter (log q [cm s−1] ∼ 7.7) for these galaxies. The average M* found is less than that of Mg ii absorbers studied in the literature. The average SFR and metallicity inferred are consistent with that expected in the main sequence and the known stellar mass–metallicity relation, respectively. High spatial resolution follow-up spectroscopic and imaging observations of this sample are imperative for probing gas flows close to the star-forming regions of high-z galaxies.

Astronomy & Astrophysics↗

Assessment of the Idaho National Laboratory Hot Fuel Examination Facility Stack Monitoring Site for Compliance with ANSI/HPS N13.1 1999

This document reports on a series of tests to determine whether the location of the air sampling probe in the Hot Fuels Examination Facility (HFEF) heating, ventilation and air conditioning (HVAC) exhaust duct meets the applicable regulatory criteria regarding the placement of an air sampling probe. Federal regulations require that a sampling probe be located in the exhaust stack according to the criteria of the ANSI/HPS N13.1-1999, Sampling and Monitoring Releases of Airborne Radioactive Substances from the Stacks and Ducts of Nuclear Facilities. These criteria address the capability of the sampling probe to extract a sample that is representative of the effluent stream. The tests conducted by PNNL during July 2010 on the HFEF system are described in this report. The sampling probe location is approximately 20 feet from the base of the stack. The stack base is in the second floor of the HFEF, and has a building ventilation stream (limited potential radioactive effluent) as well as a process stream (potential radioactive effluent, but HEPA-filtered) that feeds into it. The tests conducted on the duct indicate that the process stream is insufficiently mixed with the building ventilation stream. As a result, the air sampling probe location does not meet the criteria of the N13.1-1999 standard. The series of tests consists of various measurements taken over a grid of points in the duct cross section at the proposed sampling-probe location. The results of the test series on the HFEF exhaust duct as it relates to the criteria from ANSI/HPS N13.1-1999 are desribed in this report. Based on these tests, the location of the air sampling probe does not meet the requirements of the ANSI/HPS N13.1-1999 standard, and modifications must be made to either the HVAC system or the air sampling probe for compliance. The recommended approaches are discussed and vary from sampling probe modifications to modifying the junction of the two air exhaust streams.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Weak hard X-ray emission from broad absorption line quasars: evidence for intrinsic X-ray weakness

We report NuSTAR observations of a sample of six X-ray weak broad absorption line (BAL) quasars. These targets, at z = 0.148-1.223, are among the optically brightest and most luminous BAL quasars known at z < 1.3. However, their rest-frame ≈2 keV luminosities are 14 to >330 times weaker than expected for typical quasars. Our results from a pilot NuSTAR study of two low-redshift BAL quasars, a Chandra stacking analysis of a sample of high-redshift BAL quasars, and a NuSTAR spectral analysis of the local BAL quasar Mrk 231 have already suggested the existence of intrinsically X-ray weak BAL quasars, i.e., quasars not emitting X-rays at the level expected from their optical/UV emission. The aim of the current program is to extend the search for such extraordinary objects. Three of the six new targets are weakly detected by NuSTAR with ≲ 45 counts in the 3-24 keV band, and the other three are not detected. The hard X-ray (8-24 keV) weakness observed by NuSTAR requires Compton-thick absorption if these objects have nominal underlying X-ray emission. However, a soft stacked effective photon index (Γ{sub eff} ≈ 1.8) for this sample disfavors Compton-thick absorption in general. The uniform hard X-ray weakness observed by NuSTAR for this and the pilot samples selected with <10 keV weakness also suggests that the X-ray weakness is intrinsic in at least some of the targets. We conclude that the NuSTAR observations have likely discovered a significant population (≳ 33%) of intrinsically X-ray weak objects among the BAL quasars with significantly weak <10 keV emission. We suggest that intrinsically X-ray weak quasars might be preferentially observed as BAL quasars.

79 ASTRONOMY AND ASTROPHYSICS↗

2021 Annual Site Environmental Report

This report provides the U.S. Department of Energy (DOE) and the public with information on the level of radioactive and non-radioactive pollutants (if any) that are added to the environment as a result of Princeton Plasma Physics Laboratory’s (PPPL) operations. The results of PPPL’s 2021 environmental surveillance and monitoring program are presented and discussed. The report also summarizes environmental initiatives, assessments, and community involvement programs that were undertaken in 2021. PPPL’s on-site operations were significantly curtailed in 2021 due to the global coronavirus pandemic. PPPL has engaged in fusion energy research since 1951. The Laboratory’s mission is to develop the scientific knowledge and advanced engineering to enable fusion to power the U.S. and the world, and to developing the understanding of plasmas from the nano- to the astrophysical scale. PPPL’s primary experiment, the National Spherical Torus Experiment-Upgrade (NSTX-U) is a collaboration among national laboratories, universities, and national and international research institutions and is a major element in the US Fusion Energy Sciences Program. Its design tests the physics principles of spherical torus (ST) plasmas, playing an important role in the development of smaller, more economical fusion reactors. Due to previous operational issues, NSTX-U did not operate in 2021. PPPL is engaged in a project to replace key NSTX-U components and systems to enable operation of this international fusion user facility. In 2021, PPPL’s radiological environmental monitoring program measured tritium in the air at the NSTX-U Stack and at onsite sampling stations. Using highly sensitive air monitors, PPPL is capable of detecting small changes in the ambient levels of tritium. The operation of an in-stack monitor located on D-site is used to demonstrate compliance with the National Emission Standard for Hazardous Air Pollutants (NESHAPs) regulations. Also included in PPPL’s radiological environmental monitoring program, are water monitoring – ground, surface, and waste waters. PPPL’s radiological monitoring program characterized the background levels of tritium in the environment and those data are presented in this report. Ground water monitoring continued under New Jersey Department of Environmental Protection’s (NJDEP) Site Remediation Program regulations. PPPL monitored for non-radiological contaminants, mainly volatile organic compounds (components of common degreasing solvents). In 2021, PPPL complied with permit limits for surface and sanitary discharges. PPPL was honored with awards for EPEAT-certified electronics purchasing and use of peracetic acid as an alternative water treatment chemical in its non-potable process water systems an NJDEP recycling award.

54 ENVIRONMENTAL SCIENCES↗

The imprint of cosmic voids from the DESI Legacy Survey DR9 Luminous Red Galaxies in the Planck 2018 lensing map through spectroscopically calibrated mocks

The cross-correlation of cosmic voids with the lensing convergence (κ) map of the Cosmic Microwave Background (CMB) fluctuations provides a powerful tool to refine our understanding of the current cosmological model. However, several studies have reported a moderate tension (up to ∼2σ) between the lensing imprint of cosmic voids on the observed CMB and the ΛCDM signal predicted by simulations. To address this “lensing-is-low” tension and to obtain new, precise measurements of the signal, we exploit the large DESI Legacy Survey Luminous Red Galaxy (LRG) data set, covering approximately 19 500 deg 2 of the sky and including about 10 million LRGs at z < 1.05. Our ΛCDM template was created using the Buzzard mocks, which we specifically calibrated to match the clustering properties of the observed galaxy sample by exploiting more than one million DESI spectra. We identified our catalogs of 3D voids in the range 0.35 < z < 0.95 and cross-correlated them through a stacking methodology, dividing the sample into bins according to the redshift and λv values of the voids. For the full void sample, we report a 14σ detection of the lensing signal, with A κ = 1.016 ± 0.054, which increases to 17σ when considering the void-in-void (A κ = 0.944 ± 0.064) and the void-in-cloud (A κ = 0.975 ± 0.060) populations individually, the highest detection significance for studies of this kind. We observe a full agreement between observations and ΛCDM mocks across all redshift bins, sky regions, and void populations considered. In addition to these findings, our analysis highlights the importance of accurately matching sparseness and redshift error distributions between mocks and observations, as well as the role of λ v in enhancing the signal-to-noise ratio through void population discrimination.

79 ASTRONOMY AND ASTROPHYSICS↗

FAINT CO LINE WINGS IN FOUR STAR-FORMING (ULTRA)LUMINOUS INFRARED GALAXIES

We report the results of a search for large velocity width, low-intensity line wings—a commonly used signature of molecular outflows—in four low redshift (ultra)luminous infrared galaxies that appear to be dominated by star formation. The targets were drawn from a sample of fourteen targets presented in Chung et al., who showed the stacked CO spectrum of the sample to exhibit 1000 km s{sup −1}-wide line wings. We obtained sensitive, wide bandwidth imaging of our targets using the IRAM Plateau de Bure Interferometer. We detect each target at very high significance but do not find the claimed line wings in these four targets. Instead, we constrain the flux in the line wings to be only a few percent. Casting our results as mass outflow rates following Cicone et al. we show them to be consistent with a picture in which very high mass loading factors preferentially occur in systems with high active galactic nucleus contributions to their bolometric luminosity. We identify one of our targets, IRAS 05083 (VII Zw 31), as a candidate molecular outflow.

79 ASTRONOMY AND ASTROPHYSICS↗

Effect of Na presence during CuInSe{sub 2} growth on stacking fault annihilation and electronic properties

While presence of Na is essential for the performance of high-efficiency Cu(In,Ga)Se{sub 2} thin film solar cells, the reasons why addition of Na by post-deposition treatment is superior to pre-deposition Na supply—particularly at low growth temperatures—are not yet fully understood. Here, we show by X-ray diffraction and electron microscopy that Na impedes annihilation of stacking faults during the Cu-poor/Cu-rich transition of low temperature 3-stage co-evaporation and prevents Cu homogeneity on a microscopic level. Lower charge carrier mobilities are found by optical pump terahertz probe spectroscopy for samples with remaining high stacking fault density, indicating a detrimental effect on electronic properties if Na is present during growth.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Vacancy-mediated intermixing in InAs/InP(001) quantum dots subjected to ion implantation

We have investigated the influence of defects emanating from phosphorus implantation damage in the InP capping layer on postgrowth thermally induced intermixing in self-assembled InAs/InP(001) quantum dots (QDs). Photoluminescence (PL) spectra from as-grown samples could be described as the superposition of separate PL peaks where each peak corresponded to emission from an ensemble of QDs with a particular height ranging from 4 to 13 ML. Blueshift of up to 270 meV and significant bandwidth broadening were observed in the PL spectra after ion implantation with a fluence of 5x10{sup 11}-10{sup 14} cm{sup -2} and subsequent annealing at temperatures ranging from 450 to 600 deg. C. From the analysis of the evolution of the QD peaks upon intermixing, which revealed the coexistence of intact QD PL and a broad PL feature related to heavily intermixed QDs, it was suggested that the bandwidth broadening resulted from spatial inhomogeneity in the compositional intermixing. In order to better understand the mechanism responsible for the ion-implantation-induced intermixing, samples capped with a stack of compressively strained In{sub 0.75}Ga{sub 0.25}As/InP quantum wells (QWs) were prepared to trap vacancies released by the implantation damage while not inhibiting the effect of the interstitials. Both blueshift and bandwidth broadening were suppressed in samples containing the strained InGaAs QWs, whereas the evolution of the PL spectra from the QDs behaves as expected for interstitial-mediated intermixing. The vacancies were thus believed to be trapped in the QWs and indicated that intermixing in ion-implanted InP capped samples is mediated by vacancies. The shape of the QDs changed from a truncated pyramid in the as-grown state to a double convex lens structure after intermixing as confirmed by cross-sectional scanning transmission electron microscopy imaging. Furthermore, the change in shape and compositional intermixing of the QDs were attributed to vacancy trapping in the vicinity of the QDs as based on atomistic strain calculations.

36 MATERIALS SCIENCE↗

Aerosol and Cloud Experiments in the Eastern North Atlantic (ACE-ENA) Winter Intensive Operational Period: Aerodynamic Particle Sizer Field Campaign Report

An aerodynamic particle sizer spectrometer (APS, model 3321 by TSI Inc., Shoreview, Minnesota) was deployed at the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facility Eastern North Atlantic (ENA) observatory during the second (winter) intensive operational period (IOP) of the Aerosol and Cloud Experiments in the Eastern North Atlantic (ACE-ENA) field campaign. Data were collected from January 9 through February 26, 2018, covering the second deployment of the ARM Aerial Facility (AAF) aircraft within ACE-ENA. The standard ENA instrument suite does not provide measurements of aerosol particle size distribution for diameters greater than one micron. Properties of coarse-mode (super-micron) aerosols are rarely measured, although super-micron particles can play an important role in the aerosol life cycle, affecting aerosol optical properties and cloud nuclei activity (e.g., Clarke et al. 2003). The APS was deployed to fill this gap in particle size measurements: it is capable of measuring size-resolved concentration of the aerosols in the 0.5-20 μm range (aerodynamic diameter). The APS was installed in the aerosol trailer to sample through the main stack. Special attention was given to selection of the instrument location (just below the main stack) to minimize particle losses in the connecting lines. Most atmospheric aerosols are hygroscopic, so the measurement of the aerosol size distributions should either be performed in a controlled humidity environment or accompanied by concurrent measurement of the temperature and humidity of the sample air. The latter strategy was used during this deployment: a high-precision humidity/temperature transmitter (model EE08 by E+E Elektonik GMBH, Engerwitzdorf, Germany) was mounted in the APS sampling line immediately upstream of the APS inlet. A dedicated laptop computer was used for data collection and communications. The APS was controlled with vendor-supplied software (Aerosol Instrument Manager, ver. 10.1, TSI); aerosol size distribution data were collected over a period of 55 seconds and converted to one-minute averages. Temperature and humidity analog signals were acquired via analog-to-digital converter (ADC) module (model WTAIN-M by Weeder Technologies, Fort Walton Beach, Florida) using vendor-supplied software (ModCom) with 1- sec resolution. In post-processing, the APS data were exported from TSI proprietary format into “comma-separated value” American Standard Code for Information Interchange (ASCII) files and matched with appropriately averaged temperature and humidity data. Two significant periods of missing data were caused by local power outages. Vendor-supplied software was not designed for unattended operation: it needs to be manually restarted including sensor configuration setup.

ACE-ENA, Azores, ultra-high-sensitivity aerosol sp↗

SPECTRAL ENERGY DISTRIBUTION FITTING WITH MARKOV CHAIN MONTE CARLO: METHODOLOGY AND APPLICATION TO z = 3.1 Ly{alpha}-EMITTING GALAXIES

We present GalMC, a Markov Chain Monte Carlo (MCMC) algorithm designed to fit the spectral energy distributions (SEDs) of galaxies to infer physical properties such as age, stellar mass, dust reddening, metallicity, redshift, and star formation rate. We describe the features of the code and the extensive tests conducted to ensure that our procedure leads to unbiased parameter estimation and accurate evaluation of uncertainties. We compare its performance to grid-based algorithms, showing that the efficiency in CPU time is {approx}100 times better for MCMC for a three-dimensional parameter space and increasing with the number of dimensions. We use GalMC to fit the stacked SEDs of two samples of Lyman alpha emitters (LAEs) at redshift z = 3.1. Our fit reveals that the typical LAE detected in the IRAC 3.6 {mu}m band has age = 0.67 [0.37-1.81] Gyr and stellar mass = 3.2 [2.5-4.2] x 10{sup 9} M{sub sun}, while the typical LAE not detected at 3.6 {mu}m has age = 0.06 [0.01-0.2] Gyr and stellar mass = 2 [1.1-3.4] x 10{sup 8} M{sub sun}. The SEDs of both stacks are consistent with the absence of dust. The data do not significantly prefer exponential with respect to constant star formation history. The stellar populations of these two samples are consistent with the previous study by Lai et al., with some differences due to the improved modeling of the stellar populations. A constraint on the metallicity of z = 3.1 LAEs from broadband photometry, requiring Z < Z{sub sun} at 95% confidence, is found here for the first time.

79 ASTRONOMY AND ASTROPHYSICS↗

Planck intermediate results: XLIII. Spectral energy distribution of dust in clusters of galaxies

Although infrared (IR) overall dust emission from clusters of galaxies has been statistically detected using data from the Infrared Astronomical Satellite (IRAS), it has not been possible to sample the spectral energy distribution (SED) of this emission over its peak, and thus to break the degeneracy between dust temperature and mass. By complementing the IRAS spectral coverage with Planck satellite data from 100 to 857 GHz, we provide in this paper new constraints on the IR spectrum of thermal dust emission in clusters of galaxies. We achieve this by using a stacking approach for a sample of several hundred objects from the Planck cluster sample. This procedure averages out fluctuations from the IR sky, allowing us to reach a significant detection of the faint cluster contribution. We also use the large frequency range probed by Planck, together with component-separation techniques, to remove the contamination from both cosmic microwave background anisotropies and the thermal Sunyaev-Zeldovich effect (tSZ) signal, which dominate at ν ≤ 353 GHz. By excluding dominant spurious signals or systematic effects, averaged detections are reported at frequencies 353 GHz ≤ ν ≤ 5000 GHz. We confirm the presence of dust in clusters of galaxies at low and intermediate redshifts, yielding an SED with a shape similar to that of the Milky Way. Planck’s resolution does not allow us to investigate the detailed spatial distribution of this emission (e.g. whether it comes from intergalactic dust or simply the dust content of the cluster galaxies), but the radial distribution of the emission appears to follow that of the stacked SZ signal, and thus the extent of the clusters. Finally, the recovered SED allows us to constrain the dust mass responsible for the signal and its temperature.

79 ASTRONOMY AND ASTROPHYSICS↗

The Mass–Concentration Relation and the Stellar-to-halo Mass Ratio in the CFHT Stripe 82 Survey

We present a new measurement of the mass–concentration relation and the stellar-to-halo mass ratio over the halo-mass range 5 × 10{sup 12} to 2 × 10{sup 14} M {sub ⊙}. To achieve this, we use weak lensing measurements from the Canada–France–Hawaii Telescope Stripe 82 Survey (CS82), combined with the central galaxies from the redMaPPer cluster catalog and the LOWZ/CMASS galaxy sample of the Sloan Digital Sky Survey-III Baryon Oscillation Spectroscopic Survey Tenth Data Release. The stacked lensing signals around these samples are modeled as a sum of contributions from the central galaxy, its dark matter halo, and the neighboring halos, as well as a term for possible centering errors. We measure the mass–concentration relation: c{sub 200c}(M)=A(((M{sub 200c})/(M{sub 0}))){sup B} with A = 5.24 ± 1.24, B = −0.13 ± 0.10 for 0.2 < z < 0.4, and A = 6.61 ± 0.75, B = −0.15 ± 0.05 for 0.4 < z < 0.6. These amplitudes and slopes are completely consistent with predictions from recent simulations. We also measure the stellar-to-halo mass ratio for our samples, and find results consistent with previous measurements from lensing and other techniques.

79 ASTRONOMY AND ASTROPHYSICS↗

Stack Characterization System Development and Testing

Oak Ridge National Laboratory, as well as the rest of the U.S. Department of Energy community, has numerous off-gas stacks that need to be decommissioned, demolished, and packaged for disposal. Disposal requires a waste disposition determination phase. Process knowledge typically makes a worst-case scenario decision that may place lower-level waste into a more expensive higher-level waste disposal category. Truly useful radiological and chemical sampling can be problematic on old stacks due to their inherent height and access hazards, and many of these stacks have begun to deteriorate structurally. A remote stack characterization system (SCS) that can manage sample and data collection removes people from the hazards and provides an opportunity for access to difficult to reach internal stack areas. The SCS is a remotely operated articulated radiological data recovery system designed to deploy down into off-gas stacks from the top via crane. The battery-powered SCS is designed to stabilize itself against the stack walls and move various data recovery systems into areas of interest on the inner stack walls. Stabilization is provided by a tripod structure; sensors are mounted in a rotatable bipod underneath the tripod. Sensors include a beta/gamma/alpha detector, a removable contaminant multi-sample automated sampler, and a multi-core remote core drill. Multiple cameras provide remote task viewing, support for sampling, and video documentation of the process. A delay in funding has delayed project delivery somewhat. Therefore, this paper describes the technology and shows fabrication and testing progress to the extent that data is available.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Development of a lithium fluoride zinc sulfide based neutron multiplicity counter

Past 3He shortages led to investigations into replacement options for neutron detectors in systems that previously used 3He-based technologies. The goal of this research was to investigate the feasibility of a full-scale lithium fluoride with silver activated zinc sulfide (LiF/ZnS) based neutron multiplicity counter. The LiF/ZnS based neutron multiplicity counter (LiNMC) was developed based on an iterative process between modeling and experimental measurements. Each active region of the LiNMC contains five sheets of LiF/ZnS sandwiched between six sheets of wavelength shifting plastic to form neutron detection stacks. The wavelength shifted scintillation light was collected by photomultiplier tubes located on each end of the stacks. Twelve such detector stacks were placed around a sample chamber in a square arrangement with lithiated high density polyethylene blocks in the corners to reflect high energy neutrons and capture low energy neutrons. Preliminary calibration with a 252Cf neutron source showed that the LiNMC was able to achieve 36% neutron detection efficiency (ε) and an 11.7 μs neutron die-away time (τ) for a doubles Figure-of-merit (ε2/ τ) of 109. This is the highest doubles Figure-of-merit performance measured to-date for a 3He-free neutron multiplicity counter system. By the end of this project, the LiNMC’s basic components were integrated into a single laboratory scale system capable of proof-of-concept measurements.

3He-free↗

EMP, Attachment 1: Sampling and Analysis Plan (Rev.1)

This Sampling and Analysis Plan (SAP) is written for the Environmental Radiation Task activities related to radioactive air emissions (stack) monitoring and environmental radiological ambient air surveillance of Pacific Northwest National Laboratory (PNNL) operations at the PNNL-Richland campus and PNNL-Sequim campus. PNNL is a U.S. Department of Energy Office of Science laboratory in Richland, Washington. This plan is an attachment to PNNL’s Environmental Radiological Air Monitoring Plan (EMP) (PNNL-20919) and addresses a discrete, vital subject area that is subject to revision independent of the main text of the EMP document. This SAP provides the requirements for planning sampling events and the requirements imposed on the services provided by the analytical laboratory to the PNNL Environmental Radiation Task.

40 CFR 61 Subpart H↗