Search NASA⌕ Search

SEARCH · Search NASA

Results for “storm surge”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Will Solar Panels Help When the Power Goes Out? Planning for PV Resilience

PV systems, like all energy systems, must chart a difficult course in order to improve resilience. They need to simultaneously withstand extreme conditions that cause grid power disruptions, be configured in a way that allows electricity to be delivered to meet the PV user's needs, and overcome disruptions arising from solar resource intermittency. Certain considerations reveal themselves as key to a PV system's resilience benefits. Choice of hardware is critical, as is site selection for the PV array. Voluminous evidence in a hurricane context demonstrates that durable hardware, properly maintained and sited, leads to PV systems surviving extreme weather with their functionality intact. Structurally weak or poorly maintained PV equipment, on the other hand, has demonstrated failures during extreme weather events. PV system stakeholders should ensure that best practices are followed for hardware procurement and siting. It is also important to understand that PV systems are not one-size-fits-all. While incorporating islanding capabilities and energy storage into the system's electrical topology will typically enhance resilience, the user's needs will determine the optimally resilient conformation of any given system. These factors - appropriate hardware, siting, maintenance, and system design - are the primary drivers of PV resilience. PV systems possess high potential for resilient energy generation due to their distributed, abundant, and free fuel supply, but the technology itself does not inherently lead to resilient outcomes. Realizing PV's potential for resilience requires consideration of these determinative factors.

14 SOLAR ENERGY↗

Coping with Higher Sea Levels and Increased Coastal Flooding in New York City

The 837 km New York City shoreline is lined by significant economic assets and dense population vulnerable to sea level rise and coastal flooding. After Hurricane Sandy in 2012, New York City developed a comprehensive plan to mitigate future climate risks, drawing upon the scientific expertise of the New York City Panel on Climate Change (NPCC), a special advisory group comprised of university and private-sector experts. This paper highlights current NPCC findings regarding sea level rise and coastal flooding, with some of the City's ongoing and planned responses. Twentieth century sea level rise in New York City (2.8 cm/decade) exceeded the global average (1.7 cm/decade), underscoring the enhanced regional risk to coastal hazards. NPCC (2015) projects future sea level rise at the Battery of 28 - 53 cm by the 2050s and 46 - 99 cm by the 2080s, relative to 2000 - 2004 (mid-range, 25th - 75th percentile). High-end SLR estimates (90th percentile) reach 76 cm by the 2050s, and 1.9 m by 2100. Combining these projections with updated FEMA flood return period curves, assuming static flood dynamics and storm behavior, flood heights for the 100-year storm (excluding waves) attain 3.9-4.5 m (mid-range), relative to the NAVD88 tidal datum, and 4.9 m (high end) by the 2080s, up from 3.4 m in the 2000s. Flood heights with a 1% annual chance of occurrence in the 2000s increase to 2.0 - 5.4% (mid-range) and 12.7% per year (high-end), by the 2080s. Guided by NPCC (2013, 2015) findings, New York City has embarked on a suite of initiatives to strengthen coastal defenses, employing various approaches tailored to specific neighborhood needs. NPCC continues its collaboration with the city to investigate vulnerability to extreme climate events, including heat waves, inland floods and coastal storms. Current research entails higher-resolution neighborhood-level coastal flood mapping, changes in storm characteristics, surge height interactions with sea level rise, and stronger engagement with stakeholders and community-based organizations.

Coastal flooding↗

Thermospheric dynamics during September 18-19, 1984. II - Validation of the NCAR thermospheric general circulation model

The winds, temperatures, and densities predicted by the thermospheric GCM are compared with measurements from the Equinox Transition Study of September 17-24, 1984. Agreement between predictions and observation is good in many respects. The quiet day observations contain a strong semidiurnal wind variation which is mainly due to upward-propagating tides. The storm day wind behavior is significantly different and includes a surge of equatorward winds due to a global propagating disturbance associated with the storm onset. A quantitative statistical comparison of the predicted and measured winds indicates that the equatorward winds in the model are weaker than the observed winds, particularly during storm times. A quiet day phase anomaly in the measured F region winds which is not reproduced by the model suggests the occurrence of an important unmodeled interaction between upward propagating semidiurnal tides and high-latitude effects.

Crowley, G.↗

Coupled loads analysis of a novel shared-mooring floating wind farm

Shared mooring lines are a method to reduce the stationkeeping cost of floating offshore wind farms; however, their impacts on floating array dynamics are not yet well understood. Here this article presents advancements to floating wind farm simulation capabilities that allow the dynamic modeling of shared-mooring floating wind arrays - specifically, platform coupling through shared lines and proper phasing of wave loads across the array. These capabilities are demonstrated on a 10-turbine shared-mooring array featuring two staggered rows of wind turbines. A baseline array design with individually moored turbines is used as a basis for comparison. Coupled analysis using FAST.Farm shows that the shared-mooring design has smaller fluctuations in surge when compared to the baseline design. The mean and maximum platform offsets are highest in normal operating conditions, but the maximum mooring line tensions are highest in 50-year storm conditions. Power spectral density analysis of platform surge and sway motions shows that the shared mooring configuration does not introduce any significant inter-platform resonances. The tower-base bending moment statistics and the line tension damage equivalent loads indicate no consequential differences in turbine loading or mooring fatigue life. Anchor load analysis shows that the total required anchor capacity for the shared-mooring array is decreased by approximately 25% when shared anchors are used. Dynamic simulations of the shared mooring system under line failures show that remaining line tensions stay within bounds and that offsets are significantly smaller when compared to the baseline design. Overall, the results show that shared moorings do not introduce any dynamic response concerns in this floating wind array design.

17 WIND ENERGY↗

Flood Hazard Assessment from Storm Tides, Rain and Sea Level Rise for a Tidal River Estuary

Cities and towns along the tidal Hudson River are highly vulnerable to flooding through the combination of storm tides and high streamflows, compounded by sea level rise. Here a three-dimensional hydrodynamic model, validated by comparing peak water levels for 76 historical storms, is applied in a probabilistic flood hazard assessment. In simulations, the model merges streamflows and storm tides from tropical cyclones (TCs), offshore extratropical cyclones (ETCs) and inland "wet extratropical" cyclones (WETCs). The climatology of possible ETC and WETC storm events is represented by historical events (1931-2013), and simulations include gauged streamflows and inferred ungauged streamflows (based on watershed area) for the Hudson River and its tributaries. The TC climatology is created using a stochastic statistical model to represent a wider range of storms than is contained in the historical record. TC streamflow hydrographs are simulated for tributaries spaced along the Hudson, modeled as a function of TC attributes (storm track, sea surface temperature, maximum wind speed) using a statistical Bayesian approach. Results show WETCs are important to flood risk in the upper tidal river (e.g., Albany, New York), ETCs are important in the estuary (e.g., New York City) and lower tidal river, and TCs are important at all locations due to their potential for both high surge and extreme rainfall. The raising of floods by sea level rise is shown to be reduced by approximately 30-60 percent at Albany due to the dominance of streamflow for flood risk. This can be explained with simple channel flow dynamics, in which increased depth throughout the river reduces frictional resistance, thereby reducing the water level slope and the upriver water level.

Tidal river↗

Equatorial thermospheric measurements of temperatures and winds at Arequipa, Peru

Enhancement of FPI temperatures above quiet levels was observed a few hours after the start of magnetic activity. Magnitude of this enhancement is about 300 degrees. This is followed by relaxation to prestorm levels. Apparent average offset of RPI temperatures from mass spectrometer incoherent scatter radar by 100 to 200 degrees for relatively quiet times is also observed. There was a definite suggestion of a midnight thermal enhancement for April and August data, with a magnitude of about 100 degrees, seen in both 1983 and 1984 observations. There was a definite enhancement of 6300A surface brightness in the south as compared with other directions, probably connected to the tropical airglow arcs. Meridional winds were small (less than 25 m/s) throughout night. Indication of northward migration of the observed 6300A enhancement in the evening hours as observations approach local winter solstice. This is probably related to the observed poleward (to the south) meridional wind (of magnitude 50 m/s) in this period. Zonal component of winds always eastward, but speed approaches zero sooner near equinox than at summer solstice. Typical magnitude at peak is of order 100 to 150 m/s. Suggestion of zonal wind increase after twilight and recovery of 6300A emission for April data. Origin not clear but may be related to midnight thermal enhancement. Meridional wind virtually zero for equinox in 1983; shows evening flow towards winter hemisphere in early evening for solstice data. Suggestion of post-midnight surge in April 1984 data. No major effects associated with magnetic storm activity, but a suggestion of decrease in zonal component below nominal levels.

Meriwether, J. W., Jr.↗

Prediction of solar induced currents and effects on power transmission systems in central Canada

The auroral-electrojet zone covers three quarters of Manitoba and consequently, solar storms strongly affect transmission lines. Harmonics are generated at transformers due to the saturation of their cores by induced currents, and the level of harmonics produced may cause malfunction of control relays, and yield unacceptable distortions in normal ac waveforms. The expected effects of long ac transmission systems were studied with emphasis on a 500 kv line to be built from Winnipeg to Minneapolis-St. Paul. Spectral analysis of induced current records from Manitoba Hydro's LaVerendrye station and magnetograms from IMS stations in Manitoba were used along with results of Campbell's work on the Alaskan pipeline induction problem (1978) in order to predict periodic and surge currents. It is concluded that the surge currents will produce significant levels of harmonics and corresponding operating problems during magnetic storms.

Goddard, W. R.↗

Projected Changes to Cool‐Season Storm Tides in the 21st Century Along the Northeastern United States Coast

Abstract This study investigates changes and uncertainties to cool‐season (November‐March) storm tides along the U.S. northeast coast in the 21st century under the high RCP8.5 emission scenario compared to late 20th century. A high‐fidelity (50‐m coastal resolution) hydrodynamic storm tide model is forced with three dynamically downscaled regional climate models (RCMs) over three decadal periods (historical, mid‐21st century, and late‐21st century) to project future changes in peak storm tide elevations at coastal counties in the region. While there is no absolute consensus on future changes to storm tides, for any one future decade two out of the three RCMs project an increase at counties along the Hudson River, Delaware River, and northern Chesapeake Bay due to more intense cyclones that track inland of these locations leading to favorable surge generating conditions. The same RCMs also project a decrease at counties facing the open ocean in the mid‐Atlantic Bight as cyclone densities just offshore of the coastline decrease, particularly by late‐century. The greater tidal range in northern areas of the region leads to uncertainty in the magnitude and sign of the projected changes to storm tide levels due to the arbitrary timing of the local tidal stage and the surge‐producing weather event. This random tide‐weather timing is less important in the Chesapeake Bay and unimportant in Albemarle Sound and Pamlico Sound. Similar to other recent studies, we highlight that sea level rise is likely to be more critical than storm climatology for future changes to the cool‐season coastal flooding potential.

54 ENVIRONMENTAL SCIENCES↗

Response of the thermosphere and ionosphere to geomagnetic storms

Four numerical simulations have been performed, at equinox, using a coupled thermosphere-ionosphere model, to illustrate the response of the upper atmosphere to geomagnetic storms. The storms are characterized by an increase in magnetospheric energy input at high latitude for a 12-hour period; each storm commences at a different universal time (UT). The initial response at high latitude is that Joule heating raises the temperature of the upper thermosphere and ion drag drives high-velocity neutral winds. The heat source drives a global wind surge, from both polar regions, which propagates to low latitudes and into the opposite hemisphere. The surge has the character of a large-scale gravity wave with a phase speed of about 600 m/s. Behind the surge a global circulation of magnitude 100 m/s is established at middle latitudes, indicating that the wave and the onset of global circulation are manifestations of the same phenomena. A dominant feature of the response is the penetration of the surge into the opposite hemisphere where it drives poleward winds for a few hours. The global wind surge has a preference for the night sector and for the longitude of the magnetic pole and therefore depends on the UT start time of the storm. A second phase of the meridional circulation develops after the wave interaction but is also restricted, in this case by the buildup of zonal winds via the Coriolis interaction. Conservation of angular momentum may limit the buildup of zonal wind in extreme cases. The divergent wind field drives upwelling and composition change on both height and pressure surfaces. The composition bulge responds to both the background and the storm-induced horizontal winds; it does not simply rotate with Earth. During the storm the disturbance wind modulates the location of the bulge; during the recovery the background winds induce a diurnal variation in its position. Equatorward winds in sunlight produce positive ionospheric changes during the main driving phase of the storm. Negative ionospheric phases are caused by increases of molecular nitrogen in regions of sunlight, the strength of which depends on longitude and the local time of the sector during the storm input. Regions of positive phase in the ionosphere persist in the recovery period due to decreases in mean molecular mass in regions of previous downwelling. Ion density changes, expressed as a ratio of disturbed to quiet values, exhibit a diurnal variation that is driven by the location of the composition bulge; this variation explains the ac component of the local time variation of the observed negative storm phase.

Fuller-Rowell, T. J.↗

Geomagnetic Storm Effects on Ionospheric Irregularities: Insights from SuperDARN, Madrigal GPS TEC, and ISR Data [Slides]

Geomagnetic disturbances trigger an influx of electrons from the magnetosphere, leading to an increase electron density (even in lower altitudes), amplified ionospheric currents, and subsequently, increased conductance. A surge in the AE index, indicating heightened auroral currents, correlates with a rise in precipitated charged particles, including electrons, into the polar ionosphere. This correlation is detectable through increased parameter values measured by SuperDARN. The downward flow of electron density towards lower altitudes, as observed in PFISR data, potentially obstructs the transmission frequency from radar stations passing through the PFISR location (just like we saw in the KOD station). During the geomagnetic storm, there is increased backscatter power (increased amount of ionospheric irregularities), and the plasma flow draws closer to the radar, suggesting a possible southward shift in the auroral oval as a result of the heightened auroral activity. Increased geomagnetic activity correlates with an elevation in average TEC and induces the occurrence of SED (Storm Enhanced Density).

58 GEOSCIENCES↗

Mars - North-Polar atmospheric warming during dust storms

Viking observations of the two 1977 dust storms on Mars yield winter polar atmosphere temperature measurements that indicate a strong spatial and temporal dependence in the process of polar warming. Very little dust appears to be contained in the upper atmosphere; the data do not allow a determination of dust abundance in the lower atmosphere to be made. Surges appear in the polar warming that are prevalent only on one side of the pole, corresponding to the evening side of the 1977 observations. The polar atmospheric warming occurred during the second, but not the first, of the 1977 global dust storms.

Jakosky, Bruce M.↗

Analysis of cross-hemispheric influences on the monsoon trough and tropical cyclone genesis during FGGE and diurnal subsidence differences

For a number of years our project has been studying the cross-equatorial (winter to summer hemisphere) processs that can lead to the day-to-day alterations in the strength of the monsoon trough. These processes are also related to the genesis and intensification of tropical storms. The cross-hemispheric processes that occurred during the FGGE year are currently being studied with the use of the ECMWF analysis. How the winter hemisphere can affect low level cold surge penetration across the equator following cold front passage, and how upper tropospheric anticyclones of the winter hemisphere can produce an intensification of a tropical cyclone of the opposite hemisphere is described. ECMWF analysis of the 00Z versus 12Z diurnal difference in the clear region (10 deg diameter) subsidence occurring in the subtropical Pacific Ocean during FGGE is presented. The general reliability of the FGGE ECMWF analysis with regard to the specification of the large scale structure of tropical cyclones is shown.

Gray, W. M.↗

Experimental validation of a Kalman observer using linearized OpenFAST and a fully instrumented 1:70 model

Abstract To enable real‐time monitoring and control strategies for floating offshore wind turbines, accurate information about the state of the system is needed. This paper details the application of a Kalman filter to the UMaine VolturnUS‐S floating wind platform to provide accurate state estimates in real time using minimal system measurements. The midfidelity nonlinear simulation tool OpenFAST was used to generate the underlying linear state‐space model for the Kalman filter. This linear model and its limitations are demonstrated through comparison with experimental data collected on a 1:70 froude‐scaled model of the floating platform and tower. Using a selection of five measurements from the real system, a Kalman filter was developed to provide estimates for the remaining system states and measurements. These estimates were then validated against the experimental values collected from testing of the scale model. Validation of the Kalman filter produced accurate estimates of surge, heave, and tower base bending moment, measurements of which were not available to the Kalman filter. Performance of the Kalman filter was tested and validated over a range of sea conditions from rated wind speed to storm events and demonstrated robustness in the Kalman filter to maintain accuracy across all operating conditions despite significant error in the underlying linear model for extreme conditions.

17 WIND ENERGY↗

Electrostatic fields in a dusty Martian environment

While there have been several studies suggesting the possibility of electrical activity on Mars, to date there have been no measurements to search for evidence of such activity. In the absence of widespread water clouds and convective storm systems similar to those on the Earth and Jupiter, the most likely candidate for the creation of electrostatic charges and fields is triboelectric charging of dust, i.e., the friction between blown dust and the ground, and of dust particles with each other. Terrestrial experience demonstrates that electric fields 5 to 15 kV-m(exp -1) are not uncommon in dust storms and dust devils in desert regions, where the polarity varies according to the chemical composition and grain size. Simple laboratory experiments have demonstrated that modest electrostatic fields of roughly 5,000 V-m(exp -1) may be produced, along with electrical spark discharges and glow discharges, in a simulation of a dusty, turbulent Martian surface environment. While the Viking landers operated for several years with no apparent deleterious effects from electrostatic charging, this may have been at least partly due to good engineering design utilizing pre-1976 electronic circuitry to minimize the possibility of differential charging among the various system components. However, free roaming rovers, astronauts, and airborne probes may conceivably encounter an environment where electrostatic charging is a frequent occurrence, either by way of induction from a static electric field or friction with the dusty surface and atmosphere. This raises the possibility of spark discharges or current surges when subsequent contact is made with other pieces of electrical equipment, and the possibility of damage to modern microelectronic circuitry. Measurements of electrostatic fields on the surface of Mars could therefore be valuable for assessing this danger. Electric field measurements could also be useful for detecting natural discharges that originate in dust storms. This detection could be performed at distances ranging from 10s of km in the case of J-charge-like discharge signatures, to planetary distances if there exists a global electrical circuit or Schumann resonance spectrum.

Sentman, D. D.↗

Evaluating and Exploring Extreme Precipitation in CHIRPS3, CHIMES, and the Climate Hazards Station Database

Between 2015 and 2019, the impacts and losses associated with droughts, floods, and hurricanes surged through the interaction of increasing exposure and more extreme weather and climate (Funk 2021). In 2020, the Aon-Benfield Reinsurance Company reported that cyclones, floods, and droughts resulted in $165 billion (USD) in losses. For 2020, EM-DAT lists 363 flood, landslide, storm, and drought events impacting some 98 million people. As hazards mount, models indicate more variable precipitation, and observations indicate increasing extremes in humid regions, yet the small number of available gauge observations is declining. In this talk we briefly introduce two new resources: version 3 of the 1981-near present Climate Hazards center Infrared Precipitation with Stations (CHIRPS3) archive, and the 2000-near present Climate Hazards IMErg with Stations archive (CHIMES). The satellite-only CHIRP3 and CHIME components are based, respectively, on geostationary thermal infrared Cold Cloud Duration (CCD) values and the NASA GPM IMERGlate product. These archives benefit from thousands of station observations. In addition to standard global sources, the Climate Hazards station database includes about 5,000 additional stations in humid tropical and sub-tropical areas associated with likely increases in extreme rainfall. While effectively monitoring extreme precipitation is important to humanitarian agencies like FEWS NET, and to hydrologic modeling applications (a, b), evaluations of the widely used CHIRPS2 product indicate a propensity to underestimate extremes. Here, we explain the source of this problem. Then, focusing on pentad totals in 12 well-gauged regions, we use the high-quality gauge-based REGEN dataset to show that CHIRP3 and CHIME perform substantially better than CHIRP2. We examine trends in extremes in these validation regions, comparing REGEN results with values from the satellite-only CHIRP2, CHIRP3, CHIME and the gauge-enhanced CHIRP2, CHIRP3, CHIME. Trends in dry and humid regions are contrasted and compared. We conclude with global evaluations of the pentad CHIRP3, CHIRPS3, CHIME, CHIMES, and Climate Hazards station database products. How does the performance of the shorter period of record CHIME compare with CHIRP3? We anticipate that the sophisticated microwave-based IMERGlate inputs into CHIME will perform better. Where do we see the largest increases in extremes in these products? How well might CHIRPS3 and CHIMES perform in the context of humanitarian assistance efforts?

C Funk↗

A broadband VLF burst associated with ring current electrons

A determination is made of the source of a broadband VLF burst observed during the inbound plasmapause crossing of the explorer 45 spacecraft on April 2, 1972 in the late stage of a geomagnetic storm. Electric and magnetic receiver data from the satellite were spectrally analyzed, showing a 1-3 kHz whistler component and an emission broadening event comprising enhancement of the 1.0 and 1.78 kHz electric field intensities by several orders of magnitude. A corresponding and simulaneous enhancement of the ring current electrons was observed. The emission band spreading was attributed to the generation of quasi-electrostatic short wavelength whistler mode emissions by hot bi-maxwellian electrons surging into the domain of low density magnetized cold plasma. The inner edge of the plasma sheet, which was the source of the electrons, was not far from the event.

Maeda, K.↗

Arctic Coastal Erosion: Modeling and Experimentation

Increasing Arctic coastal erosion rates have put critical infrastructure and native communities at risk while also mobilizing ancient organic carbon into modern carbon cycles. Although the Arctic comprises one-third of the global coastline and has some of the fastest eroding coasts, current tools for quantifying permafrost erosion are unable to explain the episodic, storm-driven erosion events. Our approach, mechanistically coupling oceanographic predictions with a terrestrial model to capture the thermo-mechanical dynamics of erosion, enables this much needed treatment of transient erosion events. The Arctic Coastal Erosion Model consists of oceanographic and atmospheric boundary conditions that force a coastal terrestrial permafrost environment in Albany (a multi-physics based finite element model). An oceanographic modeling suite (consisting of WAVEWATCH III, Delft3D-FLOW, and Delft3D-WAVE) produced time-dependent surge and run-up boundary conditions for the terrestrial model. In the terrestrial model, a coupling framework unites the mechanical and thermal aspects of erosion. 3D stress/strain fields develop in response to a plasticity model of the permafrost that is controlled by the frozen water content determined by modeling 3D heat conduction and solid-liquid phase change. This modeling approach enables failure from any allowable deformation (block failure, slumping, etc.). Extensive experimental work has underpinned the ACE Model development including field campaigns to measure in situ ocean and erosion processes, strength properties derived from thermally driven geomechanical experiments, as well as extensive physical composition and geochemical analyses. Combined, this work offers the most comprehensive and physically grounded treatment of Arctic coastal erosion available in the literature. The ACE model and experimental results can be used to inform scientific understanding of coastal erosion processes, contribute to estimates of geochemical and sediment land-to-ocean fluxes, and facilitate infrastructure susceptibility assessments.

54 ENVIRONMENTAL SCIENCES↗