Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural isomers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Prediction of the structures and heats of formation of MO 2 , MO 3 , and M 2 O 5 for M = V, Nb, Ta, Pa

Structures for the mono-, di-, and tri-bridge isomers of M 2 O 5 as well as those for the MO 2 and MO 3 fragments for M = V, Nb, Ta, and Pa were optimized at the density functional theory (DFT) level. Single point CCSD(T) calculations extrapolated to the complete basis set (CBS) limit at the DFT geometries were used to predict the energetics. Here, the lowest energy dimer isomer was the di-bridge for M = V and Nb and the tri-bridge for M = Ta and Pa. The di-bridge isomers were predicted to be composed of MO 2 + and MO 3 - fragments, whereas the mono- and tri-bridge are two MO 2 + fragments linked by an O 2 - . The heats of formation of M 2 O 5 dimers, as well as MO 2 and MO 3 neutral and ionic species were predicted using the Feller–Peterson–Dixon (FPD) approach. The heats of formation of the MF 5 species were calculated to provide additional benchmarks. Dimerization energies to form the M 2 O 5 dimers are predicted to become more negative going down group 5 and range from -29 to -45 kcal mol -1 . The ionization energies (IEs) for VO 2 and TaO 2 are essentially the same at 8.75 eV whereas the IEs for NbO 2 and PaO 2 are 8.10 and 6.25 eV, respectively. The predicted adiabatic electron affinities (AEAs) range from 3.75 eV to 4.45 eV for the MO 3 species and vertical detachment energies from 4.21 to 4.59 eV for MO 3 - . The calculated M[double bond, length as m-dash]O bond dissociation energies increase from 143 kcal mol -1 for M = V to ~170 kcal mol -1 for M = Nb and Ta to ~200 kcal mol -1 for M = Pa. The M–O bond dissociation energies are all similar ranging from 97 to 107 kcal mol -1 . Natural bond analysis provided insights into the types of chemical bonds in terms of their ionic character. Pa 2 O 5 is predicted to behave like an actinyl species dominated by the interactions of approximately linear PaO 2 + groups.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Experimental Measurements of Soot and Soot Precursors of Sustainable Aviation Fuels

Sustainable Aviation Fuels (SAFs) are promising for decarbonizing the challenging-to-electrify aerospace sector and reducing yearly greenhouse gas emissions by thousands of tons. Developing predictive detailed chemical kinetic models for SAF (and traditional) fuel mixtures necessitates a robust experimental database to elucidate the intricate pyrolysis and oxidation chemistry of SAF fuel blend components. Two critical components of SAF surrogate mixtures are iso-dodecane isomers and trans-decalin. This report characterizes the structure of three slightly sooting, laminar, non-premixed, nitrogen-diluted Planar Mixing Layer Flames (PMLFs) fueled by either pure ethylene, ethylene doped with 1500ppm of either 2,2,4,6,6-pentamethyl-heptane or trans-decalin. The flames have the same stoichiometric mixture fraction and total mole fraction of fuels in the fuel stream (X F,F = X C2H4,F + X Dopant,F = 0.26), resulting in approximately the same maximum temperature (T max ≈ 1800 K) to highlight the effect of doping on soot and its gaseous precursors. The PMLF is unconfined and established between adjacent planar jets of the fuel and oxidizer streams surrounded by annular shielding nitrogen. The flow is stabilized by exhausting the hot buoyant flame products through a slot in a downstream plate onto which the cold flow impinges. Importantly, any horizontal cross-section of the PMLF has a self-similar thermochemical structure of a reactive boundary layer that grows at increasing Height Above the Burner (HAB). Therefore, the horizontal cross-sections of a PMLF can be modeled as a One-Dimensional Counterflow Flame (1D-CF) with very low strain rates which are unachievable in traditional CFs and yield a structure that is several millimeters thick. In brief, the PMLF is ideal for performing spatially resolved measurements with minimal effects of the sampling-induced perturbations, to develop and validate detailed chemical kinetic models on time scales of a few tens of milliseconds that are relevant in aviation applications. The horizontal profiles of C0-C18 gaseous species at HAB = 50 mm and soot volume fraction at 25 and 50 mm are measured using capillary sampling followed by GC-MS analyses and Laser Induced Emission Spectroscopy (LIES), respectively. Additionally, the Elastic Laser Light Scattering (E-LLS) coefficient is measured at HAB = 50 mm and 25 mm to determine the strain rates of the 1D-CFs equivalent to the characterized PMLF horizontal cross sections and the profile of the E-LLS equivalent diameter of soot. The comparison of the results in the base PMLF fueled only by ethylene with those in either doped PMLF in which 1500 ppm of ethylene are replaced with 2,2,4,6,6-pentamethyl-heptane or trans-decalin, reveals that the doping increases the mole fraction of several Polycyclic Aromatic Hydrocarbons (PAHs) at both HABs by a factor of approximately 2.5, and the soot volume fraction at both HABs by factors of ~1.5 for 2,2,4,6,6-pentamethyl-heptane and ~1.25 for trans-decalin doping, respectively. Conversely, doping causes a near doubling of the soot equivalent diameter only at HAB = 50 mm, without significant effects at 25 mm. The experimental results partially validate the tested state-of-the-art detailed chemical kinetic model and also point toward the further improvement of its predictive capabilities.

10 SYNTHETIC FUELS↗
DOE OSTI2020

Methods of producing metal sulfides, metal selenides, and metal sulfides/selenides having controlled architectures using kinetic control

The present invention is directed to methods of preparing metal sulfide, metal selenide, or metal sulfide/selenide nanoparticles and the products derived therefrom. In various embodiments, the nanoparticles are derived from the reaction between precursor metal salts and certain sulfur- and/or selenium-containing precursors each independently having a structure of Formula (I), (II), or (III), or an isomer, salt, or tautomer thereof, where Q1, Q2, Q3, R1, R2, R3, R5, and X are defined within the specification.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Diffusion Monte Carlo Study of the Structure and Spectroscopy of H 3 O –

A potential energy surface for H 3 O – has been developed based on the NN+(MOB-ML) approach we developed for studies of complexes of OH – with two or three water molecules. Unlike those systems, H 3 O – has two low-energy isomers, H – ·H 2 O and OH – ·H 2 , which differ in energy by less than 2.5 kcal mol –1 , and which are separated by a barrier of roughly 4.5 kcal mol –1 . We find that by training the NN+(MOB-ML) model using structures based on diffusion Monte Carlo (DMC) simulations initiated in the two potential minima, we are able to obtain a potential surface that describes both isomers. Using these potentials, the structure and spectra of H 3 O – and its deuterated analogues are investigated using DMC. These calculations show that the ground state wave function for H 3 O – is mainly localized in the H – ·H 2 O minimum in the potential, with a small amount of the probability amplitude (<5%) in the region of the OH – ·H 2 minimum. The delocalization of the wave function into the secondary minimum is lowered by deuteration of the water molecule, while replacing H – with D – increases the isomerization due to the shortening of the average distance between the hydride ion and the hydrogen atom in water to which it is bound. Introducing one quantum of excitation in the H – ···H 2 O stretching vibration increases the amount of isomerization, while the isomerization decreases with additional excitation of this mode. Excitation of the free OH stretch in the water molecule also increases the amount of isomerization, while excitation of the out-of-plane bending vibration suppresses the isomerization. Furthermore, the effects of partial deuteration on the frequencies for these vibrations are also explored.

Chemical structure↗
NASA NTRS1976

Isomeric structures and structural transformations in small clusters

The temperature dependence of the energies of the isomers of a seven-particle system is studied with a view toward understanding ergodicity problems in Monte Carlo simulations. It is found that the phase space of particles in a cluster is not ergodic at lower temperatures.

Kaelberer, J. B.↗
DOE OSTI2025

Core-excited microsecond isomer in 207 Pb

An isomeric state with T 1/2 = 1.46(10) μs and E x = 8835 keV has been established in 207 Pb. Here, this state likely arises from the occupation of neutron holes in the high-j i 13/2 and j 15/2 subshells following the excitation of the 208 Pb core. The high-spin excited level structure of 207 Pb has been extended beyond the previously known states up to E x ≈ 6 MeV. Additionally, a more precise value of the half-life of the I π = 10 + isomer in 208 Pb has been obtained. Shell-model calculations provide a good account of the structure up to the 31/2 + level in 207 Pb, while the energies of higher-spin states built from exclusively high-j nucleons are considerably underestimated.

190 ≤ A ≤ 219↗
DOE OSTI2020

Cation, Anion, and Radical Isomers of C4H4N: Computational Characterization and Implications for Astrophysical and Planetary Environments

Nitrogen-containing ions and molecules in the gas phase have been detected in non-Earth environments such as dark molecular clouds and more recently in the atmosphere of Saturn's moon Titan. These molecules may serve as precursors to larger heterocyclic structures that provide the foundation of complex biological molecules. On Titan, molecules of m/z 66 have been detected by the Cassini mission, and species of the empirical formula C 4 H 4 N may contribute to this signature. We have characterized seven isomers of C 4 H 4 N in anionic, neutral radical, and cationic states using density functional theory. Structures were optimized using the range-separated hybrid ωB97X-V with the cc-pVTZ and aug-cc-pVTZ basis sets. Anionic and radical C4H4N favor cyclic structures with aromatic and quasi-aromatic electron arrangements, respectively. Interestingly, ionization from the radical surface to the cation induces significant changes in structural stability, and the global minimum for positively charged isomers is CH 2 CCHCNH + , a pseudo-linear species reminiscent of cyanoallene. Select formation pathways to these structures from Titan's existing or postulated gas-phase species, reactions that are also relevant for other astrophysical environments, are discussed. By characterizing C 4 H 4 N isomers, we have identified energetically stable anionic, radical, and cationic structures that may be present in Titan's atmosphere and dark molecular clouds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Pentaerythritol structure-directing agents bias aluminum siting in MFI zeolites to increase para -xylene selectivity during toluene methylation

MFI zeolites contain ten-membered ring channels (∼0.55 nm diameter) that intersect to form larger voids (∼0.70 nm diameter). The distribution of framework Al sites dictates the void environments that confine active H + sites. MFI synthesized with pentaerythritol (PET) and Na + as structure-directing agents are interrogated using kinetically controlled toluene methylation rates and xylene isomer selectivities. High para-xylene selectivity and low toluene methylation rates indicate that MFI-PET samples contain H + sites predominantly in smaller channels. As-synthesized samples contain more framework Al than Na + , indicating that some charge compensation is provided by protonated PET-solvent complexes that bias Al siting towards these smaller channels.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Dissecting Critical Factors for Electrochemical CO 2 Reduction on Atomically Precise Au Nanoclusters

Here, this work investigates the critical factors impacting electrochemical CO 2 reduction reaction (CO 2 RR) using atomically precise Au nanoclusters (NCs) as electrocatalysts. First, the influence of size on CO 2 RR is studied by precisely controlling NC size in the 1–2.5 nm regime. We find that the electrocatalytic CO partial current density increases for smaller NCs, but the CO Faradaic efficiency (FE) is not directly associated with the NC size. This indicates that the surface-to-volume ratio, i.e. the population of active sites, is the dominant factor for determining the catalytic activity, but the selectivity is not directly impacted by size. Second, we compare the CO 2 RR performance of Au 38 isomers (Au 38 Q and Au 38 T) to reveal that structural rearrangement of identical size NCs can lead to significant changes in both CO 2 RR activity and selectivity. Au 38 Q shows higher activity and selectivity towards CO than Au 38 T, and density functional theory (DFT) calculations reveal that the average formation energy of the key *COOH intermediate on the proposed active sites is significantly lower on Au 38 Q than Au 38 T. These results demonstrate how the structural isomerism can impact stabilization of reaction intermediates as well as the overall CO 2 RR performance of identical size Au NCs. Overall, this work provides important structure–property relationships for tailoring the NCs for CO 2 RR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Identification of new transitions and levels in 163 Gd from $β$-decay studies

Background: Neutron-rich nuclei in the mass region around A = 160 have been and will continue to be of interest for the study of nuclear structure because of the rapid onset of deformation between 88 and 90 neutrons. The observation of detailed changes in nuclear structures within this mass region has provided and will continue to provide insight into the nuclear force. Purpose: Investigations of γ rays emitted following Eu 163 β -decay to Gd 163 have been performed for evaluation of the nuclear structure of Gd 163 . Method: Data were collected at the LeRIBSS station of the Holifield Radioactive Ion Beam Facility at Oak Ridge National Laboratory with an array of four Clover HPGe detectors for γ -rays and two plastic scintillators for β detection. The γ rays were identified as belonging to Gd 163 via mass selection and γ – γ – β , x-ray- γ , or γ – γ coincidences. Results: In total 107 new γ -ray transitions were observed in Gd 163 from 53 newly identified levels. Conclusions: We report the structure of Gd 163 has been identified for the first time. This structure has been evaluated in comparison to projected shell model, and potential energy surface calculations with good agreement.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

A critical comparison of CH∙∙∙π versus π∙∙∙π interactions in the benzene dimer: obtaining benchmarks at the CCSD(T) level and assessing the accuracy of lower scaling methods

In this study, we have established CCSD(T)/CBS (Complete Basis Set) limits for 3 stationary points on the benzene dimer potential energy surface, corresponding to the π∙∙∙π (parallel displaced or PD(C 2h ), minimum) and CH∙∙∙π (T-shaped or T(C 2v ), transition state) and tilted T-shaped (or TT(Cs), minimum) bonding scenarios considering both the structure and binding energy. The CCSD(T)/CBS binding energies are -2.65 ± 0.02 (PD), -2.74 ± 0.03 (T), and -2.83 ± 0.01 kcal mol -1 (TT). To this end, the CH∙∙∙π is ~0.2 kcal mol -1 stronger than the π∙∙∙π interaction, whereas the tilting of the CH donating benzene molecule with respect to the other benzene is worth 0.1 kcal mol -1 . As previously discussed in the literature, the MP2 level of theory does not provide a close match for either the energy or structure, yet the SCS-MP2 yields structures in excellent agreement with respect to the CCSD(T) result. It is found that the SCS-MI-MP2 also gives optimized structures very close to SCS-MP2 (within ~0.01 Å of the benchmark). Despite the closer match in structure, the spin-biased MP2 methods (SCS-, SCS-MI-, and SOS-MP2) incorrectly predict the relative stabilities of the isomers. That said, none of the spin biased MP2 methods offers a good compromise between energy and structure for the systems examined. Finally, the CCSD(T)/CBS benchmarks were used to assess the performance of 13 DFT functionals selected from different rungs of Jacob's ladder. Several functionals such as TPSS-D3, B3LYP-D3, B97-D, B97-D3, and B2PLYP-D3 provided a good description of the binding energies for both CH∙∙∙π and π∙∙∙π interactions, yielding values within 6% of the CCSD(T)/CBS benchmark values. Unlike the MP2 methods, these functionals correctly predict the relative stability of the PD(C 2h ) and T(C 2v ) dimers. Further, we find that there is no systematic improvement as Jacob's ladder is ascended (increased complexity of functional). The best functionals that result in a good compromise between structure and energy accuracy are B97-D3 and B2PLYP-D3 for both the CH∙∙∙π and π∙∙∙π interaction. Despite the impressive performance of these functionals, a challenge that remains is ensuring the transferability of these density functionals in accurately describing the interaction between dimers of larger aromatic molecules, the latter requiring high-level benchmarks for these systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1985

Conformational properties, torsional potential, and vibrational force field for methacryloyl fluoride - An ab initio investigation

The structure, torsional potentials, vibrational spectra, and harmonic force fields for s-cis and s-trans isomers of methacryloyl fluoride are examined to understand the conformational properties of the molecules and their relationship to macroscopic polymer properties. The structure is found to be in good agreement with experiment. It is shown by calculations that the energy difference between the cis and the transisomers is less than 1 kcal/mol at both the split valence and the split valence polarized levels, with the trans form favored. Analysis of the torsional potentials indicates that a rigid rotor model provides a reasonable description of the motion of the COF group in the molecule. The torsional barrier to interconvert the s-trans to the s-cis form is found to be 7.0 kcal/mol. A fit of the data to a three-term Fourier series shows that it is possible to reproduce the experimentally derived barrier, even though a direct determination indicates that the barrier is higher.

Laskowski, B. C.↗
DOE OSTI2021

Identification of a new isomeric state in 76 Zn following the β decay of 76 Cu

Background: The evolution of nuclear shell structure far from stability can be explored by identifying and measuring the properties of isomers. Neutron-rich nuclei between the Z = 28 and Z = 50 closed shells have been the subject of recent studies which have identified a number of 0.1 - 10 µs isomers and measured detailed spectroscopic properties. Purpose: The purpose of this analysis was to identify and measure the properties of short-lived isomeric states populated following β decay in Z ≈ 30, N ≈ 50 nuclei near the doubly magic nucleus 78 Ni. Methods: Here, radioactive ions produced by beam fragmentation at the National Superconducting Cyclotron Laboratory were implanted into a CeBr 3 scintillator coupled to a pixelated photomultiplier tube. Ancillary arrays of HPGe clover and LaBr 3 detectors were positioned around the implantation detector to measure β-delayed γ rays. Results: The previously observed 2634-keV level in 76 Zn, populated following the β decay of 76 Cu, was identified as isomeric with a half-life of 25.4(4) ns. A combination of timing and γ-ray spectroscopy was used to confirm this assignment. Shell-model calculations were performed and indicate that this state may be a high-spin negativeparity state formed by the occupation of the ν0g 9/2 orbital. Conclusions: A new isomeric state in 76 Zn has been identified and its half-life was measured. Ambiguity about the structure of this state could be resolved with further experiments.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Deprotonated sulfamic acid and its homodimers: Does sulfamic acid adopt zwitterion during cluster growth?

Here we present a joint experimental and computational study on the geometric and electronic structures of deprotonated sulfamic acid (SA) clusters [(SA) n –H] – (n = 1, 2) employing negative ion photoelectron spectroscopy and high-level ab initio calculations. The photoelectron spectra provide the vertical/adiabatic detachment energy (VDE/ADE) of the sulfamate anion (SM – ) H 2 N•SO 3 – at 4.85 ± 0.05 and 4.58 ± 0.08 eV, respectively, and the VDE and ADE of the SM – •SA dimer at 6.41 ± 0.05 and 5.87 ± 0.08 eV, respectively. The significantly increased electron binding energies of the dimer confirm the enhanced electronic stability upon the addition of one SA molecule. The CCSD(T)-predicted VDEs/ADEs agree excellently with the experimental data, confirming the identified structures as the most stable ones. Two types of dimer isomers possessing different hydrogen bonding (HB) motifs are identified, corresponding to SM – binding to a zwitterionic SA (SM – •SA z ) and a canonical SA (SM – •SA c ), respectively. Two N–H$\cdots$O HBs and one superior O–H$\cdots$O HB are formed in the lowest-lying SM – •SA c , while SM – •SA z has three moderate N–H$\cdots$O HBs, with the former being 4.71 kcal/mol more stable. Further theoretical analyses reveal that the binding strength advantage of SM – •SA c over SM – •SA z arises from its significant contributions of orbital interactions between fragments, illustrating that sulfamate strongly interacts with its parent SA acid and preferably chooses the canonical SA in the subsequent cluster formations. Given the prominent presence of SA, this study provides the first evidence that the canonical dimer model of sulfamic acid should exist as a superior configuration during cluster growth.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Discrimination of xylene isomers in a stacked coordination polymer

The separation and purification of xylene isomers is an industrially important but challenging process. Developing highly efficient adsorbents is crucial for the implementation of simulated moving bed technology for industrial separation of these isomers. Herein, we report a stacked one-dimensional coordination polymer {[Mn(dhbq)(H 2 O) 2 ], H 2 dhbq = 2,5-dihydroxy-1,4-benzoquinone} that exhibits an ideal molecular recognition and sieving of xylene isomers. Its distinct temperature-adsorbate–dependent adsorption behavior enables full separation of p -, m -, and o -xylene isomers in both vapor and liquid phases. The delicate stimuli-responsive swelling of the structure imparts this porous material with exceptionally high flexibility and stability, well-balanced adsorption capacity, high selectivity, and fast kinetics at conditions mimicking industrial settings. This study may offer an alternative approach for energy-efficient and adsorption-based industrial xylene separation and purification processes.

Science & Technology - Other Topics↗
DOE OSTI2022

A combined theoretical and experimental study of small anthracene–water clusters

Water-cluster interactions with polycyclic aromatic hydrocarbons (PAHs) are of paramount interest in many chemical and biological processes. Here we report a study of anthracene monomers and dimers with water (up to four)-cluster systems utilizing molecular beam vacuum-UV photoionization mass spectrometry and density functional calculations. Structural loss in photoionization efficiency curves when adding water indicates that various isomers are generated, while theory indicates only a slight shift in energy in photoionization states of different isomers. Calculations reveal that the energetic tendency of water is to remain clustered and not to disperse around the PAH. Theoretically, we observe water confinement exclusively in the case of four water clusters and only when the anthracenes are in a cross configuration due to optimal OH∙∙∙π interactions, indicating dependence on the size and structure of the PAH. Furthermore theory sheds light on the structural changes that occur in water upon ionization of anthracene, due to the optimal interactions of the resulting hole and water hydrogen atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Electronic Structure and Anion Photoelectron Spectroscopy of Uranium–Gold Clusters UAu n – , n = 3–7

A collaborative effort between experiment and theory towards elucidating the electronic and molecular structures of uranium-gold clusters is presented. Anion photoelectron spectra of UAu n – (n=3-7) were taken at third (355 nm) and fourth (266 nm) harmonics of a Nd:YAG laser, as well as excimer (ArF 193nm) photon energies, where the experimental adiabatic electron affinities (AEA) and vertical detachment energies (VDE) values were measured. Complementary first principles calculations were subsequently carried out to corroborate experimentally determined electron detachment energies and to determine the geometry and electronic structure for each cluster. Except for the ring-like neutral isomer of UAu 6 where one unpaired electron is spread over the Au atoms, all other neutral and anionic UAu n clusters (n = 3 - 7) were calculated to possess open-shell electrons with the unpaired electrons localized on the central U atom. The smaller clusters closely resemble the analogous UF n species, but significant deviations are seen starting with UAu 5 where a competition between U-Au and Au-Au bonding begins to become apparent. The UAu 6 system appears to mark a transition where Au-Au interactions begin to dominate, where both a ring-like and two heavily distorted octahedral structures around the central U atom are to be nearly isoenergetic. With UAu 7 , only ring-like structures are calculated. Altogether, the calculated electron detachment energies are in good agreement with the experimental values

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Stereochemical Control of Water Transport Properties in Thiol‐yne Polymers

Barrier polymers underpin almost every commercial sector, yet the needs of several emerging areas remain unmet by commercially‐available materials, including temporary orthopedic implants, transient health monitors, neural implants, and other long‐term implants. The ability to tune polymer composition independently of polymer structure positions thiol‐yne click chemistry as a promising platform to serve these emerging technologies. Here, this work describes the differences in the hierarchical structure of stoichiometrically identical materials which differ only in the proportion of the cis versus trans backbone alkene stereochemistry. Varying the isomer content in this way directs different temperature and rate dependent crystallization behavior, which affords control over micron‐scale structure. This investigation focuses on how these stereochemical features affect the water vapor permeation process by several methods and develops an understanding of how this unique structural regularity improves barrier performance relative to a commercially available water barrier polymer, poly(ethylene terephthalate).

77 NANOSCIENCE AND NANOTECHNOLOGY↗