Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface scattering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Einstein Observatory /HEAO-B/ mirror design and performance

The mirrors for the Einstein Observatory represent a substantial advance in the state of the art X-ray optics, and have been tested more thoroughly than previous telescopes. The image is characterized by a narrow, wavelength independent core, and broad energy dependent wings. The width of the core is about that expected from mechanical and visible light measurements taken during fabrication and assembly. The wings of the response function are caused by microscopic surface scattering, but only a qualitative understanding of this process exists. Improvement in surface texture to reduce the wide angle scatter is the most urgent task in the development of large X-ray optics. The mirrors have survived the experiment integration period and launch, and are performing in orbit as they performed upon the ground.

Van Speybroeck, L. P.↗
NASA NTRS2001

Near-Nadir Radar Scattering from Venus

Analysis of Magellan altimeter data using a fractal-surface scattering model. Additional information is contained in the original extended abstract.

Campbell, Bruce A.↗
NASA NTRS1985

Scattering Models and Basic Experiments in the Microwave Regime

The objectives of research over the next three years are: (1) to develop a randomly rough surface scattering model which is applicable over the entire frequency band; (2) to develop a computer simulation method and algorithm to simulate scattering from known randomly rough surfaces, Z(x,y); (3) to design and perform laboratory experiments to study geometric and physical target parameters of an inhomogeneous layer; (4) to develop scattering models for an inhomogeneous layer which accounts for near field interaction and multiple scattering in both the coherent and the incoherent scattering components; and (5) a comparison between theoretical models and measurements or numerical simulation.

Fung, A. K.↗
NASA NTRS1979

Relationship between hurricane surface winds and L-band radar backscatter from the sea surface

High-altitude, airborne, L-band synthetic aperture radar (SAR) data were collected in Hurricane Gloria on 28 and 30 September 1976. The backscattered power levels (proportional to the surface scattering coefficient) averaged over a few square kilometers of surface area were found to vary with surface wind speed and the angle of the wind relative to the radar. Comparisons between the backscatter from the eye and eye-wall regions of the hurricane were made with low-level aircraft wind measurements that were nearly coincident in space and time. The SAR has the potential advantage over other radar types because of its higher spatial resolution. It also appears to have the ability to penetrate rainfall, with a reduction in the echo from the surface. One difference when compared with higher frequency microwave radars is a decrease in the sensitivity of the backscatter to changes in wind speed. This dependence of L-band radar backscatter on surface winds suggests that the winds associated with hurricanes can be measured with airborne or spaceborne radars.

Weissman, D. E.↗
NASA NTRS2000

Remote Sensing of Wind Fields and Aerosol Distributions with Airborne Scanning Doppler Lidar

The coherent Doppler lidar, when operated from an airborne platform, offers a unique measurement capability for study of atmospheric and surface processes and feature. This is especially true for scientific objectives requiring measurements in optically-clear air, where other remote sensing technologies such as Doppler radar are at a disadvantage in terms of spatial resolution and coverage. The atmospheric lidar remote sensing groups of several US institutions, led by Marshall Space Flight Center, have developed an airborne coherent Doppler lidar capable of mapping the wind field and aerosol structure in three dimensions. The instrument consists of about a 1 Joule/pulse (eyesafe) lidar transceiver, telescope, scanner, inertial measurement unit, and operations control system to orchestrate all subsystem functions and tasks. The scanner is capable of directing the expanded lidar beam in a variety of ways, in order to extract vertically resolved wind fields. Horizontal resolution is about 1 km; vertical resolution is even finer. Winds are obtained by measuring backscattered, Doppler-shifted laser radiation from naturally-occurring aerosol particles (on an order of 1 micron in diameter). Measurement coverage depends on aerosol spatial distribution and concentration. Velocity accuracy has been verified to be about 1 m/s. A variety of applications has been demonstrated during the three flight campaigns conducted during 1995-1998. Examples will be shown during the presentation. In 1995, boundary layer winds over the ocean were mapped with unprecedented resolution. In 1996, unique measurements were made of flow over the complex terrain of the Aleutian Islands; interaction of the marine boundary layer jet with the California coastal mountain range; a weak dry line in Texas - New Mexico; an upper tropospheric jet stream; the angular dependence of sea surface scattering; and in-flight radiometric calibration using the surface of White Sands National Monument. In 1998, the first measurements of eyewall and boundary layer winds within a hurricane were made with the airborne Doppler lidar. Potential future applications, and plans for improvements, will also be identified.

Rothermel, Jeffry↗
NASA NTRS2001

Remote Sensing of Wind Fields and Aerosol Distribution with Airborne Scanning Doppler Lidar

The coherent Doppler laser radar (lidar), when operated from an airborne platform, is a unique tool for the study of atmospheric and surface processes and features. This is especially true for scientific objectives requiring measurements in optically-clear air, where other remote sensing technologies such as Doppler radar are typically at a disadvantage. The atmospheric lidar remote sensing groups of several US institutions, led by Marshall Space Flight Center, have developed an airborne coherent Doppler lidar capable of mapping the wind field and aerosol structure in three dimensions. The instrument consists of an eye-safe approx. 1 Joule/pulse lidar transceiver, telescope, scanner, inertial measurement unit, and flight computer system to orchestrate all subsystem functions and tasks. The scanner is capable of directing the expanded lidar beam in a variety of ways, in order to extract vertically-resolved wind fields. Horizontal resolution is approx. 1 km; vertical resolution is even finer. Winds are obtained by measuring backscattered, Doppler-shifted laser radiation from naturally-occurring aerosol particles (of order 1 micron diameter). Measurement coverage depends on aerosol spatial distribution and composition. Velocity accuracy has been verified to be approx. 1 meter per second. A variety of applications have been demonstrated during the three flight campaigns conducted during 1995-1998. Examples will be shown during the presentation. In 1995, boundary layer winds over the ocean were mapped with unprecedented resolution. In 1996, unique measurements were made of. flow over the complex terrain of the Aleutian Islands; interaction of the marine boundary layer jet with the California coastal mountain range; a weak dry line in Texas - New Mexico; the angular dependence of sea surface scattering; and in-flight radiometric calibration using the surface of White Sands National Monument. In 1998, the first measurements of eyewall and boundary layer winds within a hurricane were made with the airborne Doppler lidar. Potential applications and plans for improvement will also be described.

Rothermel, Jeffry↗
NASA NTRS1987

Polarization of light scattered by clover

This study was undertaken in order to better understand the factors that govern the polarization of light scattered from vegetation and soils. This phenomenon is not well understood but is potentially of interest for remote sensing of the earth. The intensity and polarization of light scattered by clover in vivo and soil were measured at a number of different angles of incidence and reflectance. Both individual leaves and natural patches of vegetation were measured. The Umov effect, or inverse relation between polarization and reflectance noted by many earlier workers, was observed here and is shown to be a very general property of diffusely scattering surfaces. The light transmitted through the leaves was found to be negatively polarized. The polarization of light scattered from aggregations of leaves is affected by this negatively polarized, transmitted light. The light scattered from the upper leaf surfaces was found to be positively polarized in a manner which could be accounted for quantitatively by specular Fresnel reflection from small, randomly oriented facets on the surfaces of the leaves.

Woessner, Paul↗
NASA NTRS2003

Development of Numerical Codes for Modeling Electromagnetic Behavior at High Frequencies Near Large Objects

A study into the problem of determining electromagnetic solutions at high frequencies for problems involving complex geometries, large sizes and multiple sources (e.g. antennas) has been initiated. Typical applications include the behavior of antennas (and radiators) installed on complex conducting structures (e.g. ships, aircrafts, etc..) with strong interactions between antennas, the radiation patterns, and electromagnetic signals is of great interest for electromagnetic compatibility control. This includes the overall performance evaluation and control of all on-board radiating systems, electromagnetic interference, and personnel radiation hazards. Electromagnetic computational capability exists at NASA LaRC, and many of the codes developed are based on the Moment Method (MM). However, the MM is computationally intensive, and this places a limit on the size of objects and structures that can be modeled. Here, two approaches are proposed: (i) a current-based hybrid scheme that combines the MM with Physical optics, and (ii) an Alternating Direction Implicit-Finite Difference Time Domain (ADI-FDTD) method. The essence of a hybrid technique is to split the overall scattering surface(s) into two regions: (a) a MM zone (MMZ) which can be used over any part of the given geometry, but is most essential over irregular and "non-smooth" geometries, and (b) a PO sub-region (POSR). Currents induced on the scattering and reflecting surfaces can then be computed in two ways depending on whether the region belonged to the MMZ or was part of the POSR. For the MMZ, the current calculations proceed in terms of basis functions with undetermined coefficients (as in the usual MM method), and the answer obtained by solving a system of linear equations. Over the POSR, conduction is obtained as a superposition of two contributions: (i) currents due to the incident magnetic field, and (ii) currents produced by the mutual induction from conduction within the MMZ. This effectively leads to a reduction in the size of linear equations from N to N - Npo with N being the total number of segments for the entire surface and Npo the number of segments over the POSR. The scheme would be appropriate for relatively large, flat surfaces, and at high frequencies. The ADI-FDTD scheme provides for both transient and steady state analyses. The restrictive Courant-Friedrich-Levy (CFL) condition on the time-step is removed, and so large time steps can be chosen even though the spatial grids are small. This report includes the problem definition, a detailed discussion of both the numerical techniques, and numerical implementations for simple surface geometries. Numerical solutions have been derived for a few simple situations.

Joshi, R. P.↗
NASA NTRS1973

Backscattering from a two-scale rough surface with application to radar sea return

A two-scale composite surface scattering theory was developed without using the noncoherent assumption. The surface is assumed electrically homogeneous and finitely conducting; the surface roughness may be nonuniform geometrically. The special forms of the terms for excluding the non-coherent assumption and the meanings of these terms are discussed. To gain insight into the mechanisms of backscattering, the results are compared with those obtained by previous theories. The comparison with NRL data shows satisfactory agreement for both horizontal and vertical polarization, especially for incident angles larger than 30 deg. For smaller incident angles, NASA/JSC data have been chosen for comparison and close agreement is again observed.

Chan, H. L.↗
NASA NTRS1987

Radar polarimeter measures orientation of calibration corner reflectors

Radar polarimeter signals from a set of trihedral corner reflectors located in the Goldstone Dry Lake in California were analyzed, and three types of scattering behavior were observed: (1) Bragg-like slightly rough surface scattering that represents the background signal from the dry lake, (2) trihedral corner reflector scattering that returns the incident polarization, and (3) two-bounce corner reflector scattering resulting from a particular alignment of a trihedral reflector. A radar calibration approach using trihedral corner reflectors should be designed such that precise alignment of the reflectors is ensured, as three-bounce and two-bounce geometries lead to very different cross sections and hence very different inferred calibration factors.

Zebker, Howard A.↗
NASA NTRS1996

Dual-Line Detection Rayleigh Scattering Measurements of Density and Temperature

Measurements of the laser Rayleigh scattering signal in a flow to determine density and temperature have been commonly employed in open flames and in wind tunnel environments. In these measurements, the density or reciprocal temperature is correlated with the Rayleigh scattering signal intensity. A major advantage of Rayleigh scattering for these applications is the simple experimental arrangement allowed by this technique. Intensity-based Rayleigh scattering measurements of density and temperature have been limited to relatively clean flows in open environments so that interference from particle scattering and laser scattering is minimal. A new approach, using dual-line detection Rayleigh (DLDR) scattering extends the applicability of Rayleigh scattering measurements of density and temperature to enclosed environments where surface scattering interference is high. Depending on particle size and optical properties, this approach may also reduce interference from particle scattering.

Annen, Kurt↗
NASA NTRS2023

Sidelobe Modeling and Mitigation for A Three Mirror Anastigmat Cosmic Microwave Background Telescope

Telescopes measuring cosmic microwave background (CMB) polarization on large angular scales require exquisite control of systematic errors to ensure the fidelity of the cosmological results. In particular, far-sidelobe contamination from wide angle scattering is a potentially prominent source of systematic error for large aperture microwave telescopes. Here we describe and demonstrate a ray-tracing-based modeling technique to predict far sidelobes for a three mirror anastigmat telescope designed to observe the CMB from the South Pole. Those sidelobes are produced by light scattered in the receiver optics subsequently interacting with the walls of the surrounding telescope enclosure. After comparing simulated sidelobe maps and angular power spectra for different enclosure wall treatments, we propose a highly scattering surface that would provide more than an order of magnitude reduction in the degree-scale far-sidelobe contrast compared to a typical reflective surface. We conclude by discussing the fabrication of a prototype scattering wall panel and presenting measurements of its angular scattering profile.

Ian Gullett↗
NASA NTRS1983

Coherent scattering of a spherical wave from an irregular surface

The scattering of a spherical wave from a rough surface using the Kirchhoff approximation is considered. An expression representing the measured coherent scattering coefficient is derived. It is shown that the sphericity of the wavefront and the antenna pattern can become an important factor in the interpretation of ground-based measurements. The condition under which the coherent scattering-coefficient expression reduces to that corresponding to a plane wave incidence is given. The condition under which the result reduces to the standard image solution is also derived. In general, the consideration of antenna pattern and sphericity is unimportant unless the surface-height standard deviation is small, i.e., unless the coherent scattering component is significant. An application of the derived coherent backscattering coefficient together with the existing incoherent scattering coefficient to interpret measurements from concrete and asphalt surfaces is shown.

Fung, A. K.↗
NASA NTRS1992

Basic studies in microwave remote sensing

Scattering models were developed in support of microwave remote sensing of earth terrains with particular emphasis on model applications to airborne Synthetic Aperture Radar measurements of forest. Practically useful surface scattering models based on a solution of a pair of integral equations including multiple scattering effects were developed. Comparisons of these models with controlled scattering measurements from statistically known random surfaces indicate that they are valid over a wide range of frequencies. Scattering models treating a forest environment as a two and three layered media were also developed. Extensive testing and comparisons were carried out with the two layered model. Further studies with the three layered model are being carried out. A volume scattering model valid for dense media such as a snow layer was also developed that shows the appropriate trend dependence with the volume fraction of scatterers.

Fung, Adrian K.↗
NASA NTRS1993

BL Lacertae objects, Fanaroff-Riley type I radio sources, and cluster cooling flows

The correctness of the view that the Fanaroff-Riley type I (F-R I) radio galaxies and the BL Lac objects are intrinsically the same and that the strong emission seen in BL Lac may be the result of beaming of radiation from the galactic nucleus is examined. Expressions are derived for the surface brightness of scattered beams of polarized or unpolarized radiation, and the expected scattered light surface is calculated assuming the beams have spectra and fluxes consistent with those observed for BL Lac objects. The models are compared to recent observations of lobes of excess, polarized blue light in Cy-A, and observations of lobes of UV light in the central regions of the cD galaxies in A1795 and A2597. It was found that the models predict scattered surface brightnesses in reasonable agreement with those observed. If these lobes are indeed scattered light, this would indicate that F-R I radio galaxies do possess beams of radiation with apparent luminosities similar to BL Lac objects and that the radiation is actively beamed and not merely obscured by a torus of dust around the nucleus.

Sarazin, Craig L.↗
NASA NTRS1978

Backscattering from a Gaussian-distributed perfectly conducting rough surface

The original intent of the reported investigation was to find a solution to the composite surface scattering problem which provided for a continuous transition between the near-specular physical optics and wide-angle tilted plane Bragg solutions. The employed approach is based on analytical techniques rather than physical considerations. The analysis employs a perturbation technique developed by Burrows (1967, 1968, 1973), which because of its simplicity, is the key to the entire solution. The analysis is restricted to the case of backscattering from a perfectly conducting surface. General expressions are presented for the scattering from a Gaussian perfectly conducting surface characterized by an anisotropic spectrum and possessing many scales of roughness. The accuracy of the result is dependent upon the large-scale structure having large height excursions and small curvature.

Brown, G. S.↗