Search NASA⌕ Search

SEARCH · Search NASA

Results for “synthetic model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Mars - Far-infrared spectra and thermal-emission models

Spectra of Mars from 100 to 360 kaysers were obtained during three different observation periods from NASA's Kuiper Airborne Observatory. Also, a new thermal model was constructed for the surface of Mars, and synthetic spectra were computed from the models to compare with the observations. The models include the effects of a dusty atmosphere which absorbs, scatters, and reradiates energy. The synthetic spectra show significant effects on disk-averaged brightness temperatures, as well as absorption features due to silicate dust. The spectra of Mars, which are ratios of Mars to the moon, do not fit the synthetic spectra unless the surface emissivities of Mars and the moon have different dependencies on wavelength. A possible explanation for this behavior is a difference in soil particle-size distributions between Mars and the moon, with Mars being depleted in large particles compared to the moon. Small particles are consistent with clay minerals which have been suggested elsewhere as constituents of the Martian surface.

Simpson, J. P.↗

Turbulence Measurements on a 2D NACA 0036 with Synthetic Jet Flow Control

An active flow control experiment was conducted on a 2-ft chord NACA 0036 airfoil in a 3-ft by 4-ft Wind Tunnel at Re = 1 x 10(exp 6). The model was equipped with synthetic jet actuators at x/c = 0.30 and 0.65 that provided 120 Hz periodic excitation at a C(sub mu) 0.86% through 0.06-in wide slots. Three different slot con gurations were tested, including a baseline with no slots. Surface pressure data was collected to compare to previous tests and to combine with turbulence data to aid future CFD modeling efforts. Turbulence data, measured by hot-wire, was compared with and without flow control. Pressure data corroborates previous test data and provides more points for CFD validation. Hot-wire results showed ow control reduced the separated wake size and brought the high Reynolds stress shear layer closer to the airfoil surface. The position of this layer to the surface was altered more significantly than the magnitude of the peak stresses. Flow control was shown to increase turbulent energy in the attached boundary layer downstream of the slot but to have little effect upstream. These results provide further justification to continue assessing the potential of active flow control to reduce drag of helicopter airframe components.

Wilson, J. S.↗

AIRSAR observations of the Gulf Stream with interpretation from sea truth and modeling

On 20 Jul., JPL/DC-8 synthetic aperture radar (SAR) participated in the 17-21 Jul. 1990 NRL Gulf Stream (GS) experiment in preparation for SIR-C missions in 1993, 1994, and 1996 for calibration purposes and to check modes and techniques for operation at our experimental site off the east coast of the US. During this experiment, coordinated and near simultaneous measurements were performed from ship (R/V Cape Henlopen) and other aircraft (NADC/P-3 and NRL/P-3) to address scientific questions relating to the origin of 'slick-like' features observed by Scully-Power, the refraction and modulation of waves by variable currents, the effect of current and thermal fronts on radar imagery signatures and the modification of Kelvin ship wakes by fronts. The JPL/DC-8 and NADC/P-3 SAR's are fully polarimetric systems. Their composite frequency range varies between P- and X-band. We describe in detail the Airborne SAR (AIRSAR) participation in the Jul. 1990 GS experiment and present preliminary results of the ongoing analysis and interpretation of the radar imagery in the context of ground truth, other remote measurements, and modeling efforts.

Valenzuela, G. R.↗

Antarctic Ice Shelf Thickness Change from Multimission Lidar Mapping

We calculate rates of ice thickness change and bottom melt for ice shelves in West Antarctica and the Antarctic Peninsula from a combination of elevation measurements from NASA–CECS Antarctic ice mapping campaigns and NASA Operation IceBridge corrected for oceanic processes from measurements and models, surface velocity measurements from synthetic aperture radar, and high-resolution outputs from regional climate models. The ice thickness change rates are calculated in a Lagrangian reference frame to reduce the effects from advection of sharp vertical features, such as cracks and crevasses, that can saturate Eulerian-derived estimates. We use our method over different ice shelves in Antarctica, which vary in terms of size, repeat coverage from airborne altimetry, and dominant processes governing their recent changes. We find that the Larsen-C Ice Shelf is close to steady state over our observation period with spatial variations in ice thickness largely due to the flux divergence of the shelf. Firn and surface processes are responsible for some short-term variability in ice thickness of the Larsen-C Ice Shelf over the time period. The Wilkins Ice Shelf is sensitive to short-timescale coastal and upper-ocean processes, and basal melt is the dominant contributor to the ice thickness change over the period. At the Pine Island Ice Shelf in the critical region near the grounding zone, we find that ice shelf thickness change rates exceed 40m/yr, with the change dominated by strong submarine melting. Regions near the grounding zones of the Dotson and Crosson ice shelves are decreasing in thickness at rates greater than 40m/yr, also due to intense basal melt. NASA–CECS Antarctic ice mapping and NASA Operation IceBridge campaigns provide validation datasets for floating ice shelves at moderately high resolution when coregistered using Lagrangian methods.

Sutterley, Tyler C.↗

Intelligent Entity Behavior Within Synthetic Environments

This paper describes some elements in the development of realistic performance and behavior in the synthetic entities (players) which support Modeling and Simulation (M&S) applications, particularly military training. Modern human-in-the-loop (virtual) training systems incorporate sophisticated synthetic environments, which provide: 1. The operational environment, including, for example, terrain databases; 2. Physical entity parameters which define performance in engineered systems, such as aircraft aerodynamics; 3. Platform/system characteristics such as acoustic, IR and radar signatures; 4. Behavioral entity parameters which define interactive performance, including knowledge/reasoning about terrain, tactics; and, 5. Doctrine, which combines knowledge and tactics into behavior rule sets. The resolution and fidelity of these model/database elements can vary substantially, but as synthetic environments are designed to be compose able, attributes may easily be added (e.g., adding a new radar to an aircraft) or enhanced (e.g. Amending or replacing missile seeker head/ Electronic Counter Measures (ECM) models to improve the realism of their interaction). To a human in the loop with synthetic entities, their observed veridicality is assessed via engagement responses (e.g. effect of countermeasures upon a closing missile), as seen on systems displays, and visual (image) behavior. The realism of visual models in a simulation (level of detail as well as motion fidelity) remains a challenge in realistic articulation of elements such as vehicle antennae and turrets, or, with human figures; posture, joint articulation, response to uneven ground. Currently the adequacy of visual representation is more dependant upon the quality and resolution of the physical models driving those entities than graphics processing power per Se. Synthetic entities in M&S applications traditionally have represented engineered systems (e.g. aircraft) with human-in-the-loop performance characteristics (e.g. visual acuity) included in the system behavioral specification. As well, performance affecting human parameters such as experience level, fatigue and stress are coming into wider use (via AI approaches) to incorporate more uncertainty as to response type as well as performance (e.g. Where an opposing entity might go and what it might do, as well as how well it might perform).

Kruk, R. V.↗

On the Sandage period shift effect among field RR Lyrae stars

The origin of the disagreement between the results of the synthetic horizontal branch (HB) model of Lee et al. (1990) and the Sandage (1990) analysis of Lub's (1977) data on a sample of field RR Lyrae stars is investigated, extending the original synthetic HB calculations of Lee et al. to all HB types over the metallicity range of the Galactic halo. It is shown that the period shifts of the RR Lyrae stars in globular clusters depend strongly on their HB type and metallicity. Results suggest that the disagreement between the slopes, Delta logP(Teff)/Delta Fe/H, obtained by Lee et al. and the ones obtained by Sandage can be explained by the fact that Lub's sample may have contained many highly evolved stars in the metallicity range of Fe/H between -2.0 and -1.6, since Lee's analysis did not include these stars.

Lee, Young-Wook↗

Pathways to Meteoritic Glycine and Methylamine

Glycine and methylamine are meteoritic water-soluble organic compounds that provide insights into the processes that occurred before, during, and after the formation of the Solar System. Both glycine and methylamine and many of their potential synthetic precursors have been studied in astrophysical environments via observations, laboratory experiments, and modeling. Despite these studies, the synthetic mechanisms for their formation leading to their occurrence in meteorites remain poorly understood. Typical 13C-isotopic values ((delta)13C) of meteoritic glycine and methylamine are 13C-enriched relative to their terrestrial counterparts; thus, analyses of their stable carbon isotopic compositions (13C/12C) may be used not only to assess terrestrial contamination in meteorites but also to provide information about their synthetic routes inside the parent body. Here, we examine potential synthetic routes of glycine and methylamine from a common set of precursors present in carbonaceous chondrite meteorites, using data from laboratory analyses of the well-studied CM2 Murchison meteorite. Several synthetic mechanisms for the origins of glycine and methylamine found in carbonaceous chondrites may be possible, and the prevalence of these mechanisms will largely depend on (a) the molecular abundance of the precursor molecules and (b) the levels of processing (aqueous and thermal) that occurred inside the parent body. In this work, we also aim to contextualize the current knowledge about gas-phase reactions and irradiated ice grain chemistry for the synthesis of these species through parent body processes. Our evaluation of various mechanisms for the origins of meteoritic glycine and methylamine from simple species shows what work is still needed to evaluate both the abundances and isotopic compositions of simpler precursor molecules from carbonaceous chondrites as well as the effects of parent body processes on those abundances and isotopic compositions. The analyses presented here combined with the indicated measurements will aid a better interpretation of quantitative analysis of reaction rates, molecular stability, and distribution of organic products from laboratory simulations of interstellar ices, astronomical observations, and theoretical modeling.

interstellar ice↗

Tropospheric gas composition and cloud structure of the Jovian North Equatorial Belt

Voyager IRIS observations of the NEB reveal longitudinal variability of 5-micron brightness temperatures of order 100 C. An anisotropic multiple scattering radiative transfer model is used to calculate synthetic spectra for comparison with the IRIS observations. Mie theory is used to model the spectral dependence of cloud extinction from 180 to 2300/cm. Cloud base locations within the model vary with assumed gas abundances according to thermochemical equilibrium. It is found that spatial variations in the abundance profiles of the condensible species, parahydrogen profiles and cloud optical depths can be used as tracers of the local and large-scale dynamics. The variation of cloud opacity is strongly correlated with the variation of relative humidity, which suggests that dynamic depletion of water vapor above the cloud forming level is the most plausible model to explain the spatial variation in the water profile within the NEB.

Carlson, Barbara E.↗

Multiwavelength Modeling of Nove Atmospheres

LMC 1988 #1 was a slow, CO type, dust forming classical nova. It was the first extragalactic nova to be observed with the IUE satellite. We have successfully fitted observed ultraviolet and optical spectra of LMC 1988 #1 taken within the first two months of its outburst (when the atmosphere was still optically thick) with synthetic spectra computed using PHOENIX nova model atmospheres. The synthetic spectra reproduce most of the features seen in the spectra and provide V band magnitudes consistent with the observed light curve. The fits are improved by increasing the CNO abundances to 10 times the solar values. The bolometric luminosity of LMC 1988 #1 was approximately constant at 2 x 10(exp 38) ergs per second at a distance of 47.3 kpc for the first 2 months of the outburst until the formation of the dust shell.

Huschildt, P. H.↗

Synthetic Scene Generation of Stennis Target Range for the Calibration of Remote Sensing Systems

The validation and verification (V&V) target range developed at Stennis Space Center is a useful tool for the calibration of remote sensing systems. In this paper, we present an algorithm for generating synthetic scenes or digital models of this target range. The atmospheric radiative transfer code Modtran 4 is used in simulating at-sensor radiance for a given sensor. Software is developed to generate the scene with different spatial and spectral resolutions using the at-sensor radiance values. Synthetic scenes provide a cost-effective way for in-flight validation for the spatial and radiometric accuracy of the data. Other applications include mission planning, sensor simulation, and trade-off analysis in sensor design. The radiometric and spatial accuracy of the simulation is evaluated by comparing simulated scenes with AVIRIS acquired values.

Cao, Chang-Yong↗

Analysis of Snow Bidirectional Reflectance from ARCTAS Spring-2008 Campaign

The spring 2008 Arctic Research of the Composition of the Troposphere from Aircraft and Satellites (ARCTAS) experiment was one of major intensive field campaigns of the International Polar Year aimed at detailed characterization of atmospheric physical and chemical processes in the Arctic region. A part of this campaign was a unique snow bidirectional reflectance experiment on the NASA P-3B aircraft conducted on 7 and 15 April by the Cloud Absorption Radiometer (CAR) jointly with airborne Ames Airborne Tracking Sunphotometer (AATS) and ground-based Aerosol Robotic Network (AERONET) sunphotometers. The CAR data were atmospherically corrected to derive snow bidirectional reflectance at high 1 degree angular resolution in view zenith and azimuthal angles along with surface albedo. The derived albedo was generally in good agreement with ground albedo measurements collected on 15 April. The CAR snow bidirectional reflectance factor (BRF) was used to study the accuracy of analytical Ross-Thick Li-Sparse (RTLS), Modified Rahman-Pinty-Verstraete (MRPV) and Asymptotic Analytical Radiative Transfer (AART) BRF models. Except for the glint region (azimuthal angles phi less than 40 degrees), the best fit MRPV and RTLS models fit snow BRF to within 0.05. The plane-parallel radiative transfer (PPRT) solution was also analyzed with the models of spheres, spheroids, randomly oriented fractal crystals, and with a synthetic phase function. The latter merged the model of spheroids for the forward scattering angles with the fractal model in the backscattering direction. The PPRT solution with synthetic phase function provided the best fit to measured BRF in the full range of angles. Regardless of the snow grain shape, the PPRT model significantly over-/underestimated snow BRF in the glint/backscattering regions, respectively, which agrees with other studies. To improve agreement with experiment, we introduced a model of macroscopic snow surface roughness by averaging the PPRT solution over the slope distribution function and by adding a simple model of shadows. With macroscopic roughness described by two parameters, the AART model achieved an accuracy of about plus or minus 0.05 with a possible bias of plus or minus 0.03 in the spectral range 0.4-2.2 micrometers. This high accuracy holds at view zenith angles below 55-60 degrees covering the practically important range for remote sensing applications, and includes both glint and backscattering directions.

Lyapustin, A.↗

Simulations of SAR wave spectra using high spectral resolution estimates from the SCR and ROWS instruments

A numerical model for predicting the synthetic aperture radar (SAR) image of a moving ocean surface is described, and results are presented for two SIR-B data sets collected off the coast of Chile. Wave height spectra measured by the NASA radar ocean wave spectrometer (ROWS) and surface contour radar (SCR) were used as inputs to this model, and results are compared with actual SIR-B image spectra from orbits 91 and 106.

Lyzenga, D.↗

NISAR Spacecraft Environmental Torque Modeling During Operations

Environmental torques imparted on the NISAR (NASA-ISRO (NASA Jet PropulsionLaboratory (JPL)-Indian Space Research Organization (ISRO) Synthetic Aperture Radar) spacecraft are modeled. The environmental torques comprise of the gravity gradient, atmospheric drag, and solar radiation pressure. These torques act as external disturbances on the spacecraft and cause momentum to accumulate. This momentum needs to be unloaded via attitude control hardware. In order to size the hardware, it is important to determine the environmental torques imparted on the spacecraft. The results indicate that the worst case gravity gradient, drag, and solar radiation pressure torques are 7.4 by 10 (sup -3) Nm (Newton meters), 6.01 by 10 (sup -3) Nm, and 14.03 by 10(sup -3) Nm, respectively.

Rizvi, Farheen↗

Carbon and nitrogen abundances in F- and G-type stars

Carbon and nitrogen abundances have been obtained for a sample of 11-F- and G-type dwarfs covering a range in Fe/H abundance ratio from -0.8 to +0.3. Model atmospheres, which included the effects of convection and line blanketing, were used to calculate synthetic spectra of the CH, CN, and NH molecular bands. Effective oscillator strengths for the bands studied were found by matching synthetic spectra calculated from a model solar atmosphere with the observed solar bands. Many of the metal-poor stars, and particularly the high-velocity stars, were found to have substantial nitrogen over-deficiencies, suggesting that N is manufactured mostly in a secondary manner. The carbon-to-iron ratios were similar to the solar ratio, although there may be slight C over-deficiencies in metal-poor stars. However, the variation in C/Fe is not as marked as that found recently by Hearnshaw (1974). A comprehensive discussion of the theoretical errors is given, and some applications to Galactic evolution are noted.

Clegg, R. E. S.↗

Modeling the performance of the human (pilot) interaction in a synthetic flight domain: Information theoretic approach

Current advances in computing technology are devoid of formal methods that describe the theories of how information is shared between humans and machines. Specifically, in the domain of human-machine interaction, a common mathematical foundation is lacking. The aim of this paper is to propose a formal method of human-machine (H-M) interaction paradigm from the information view point. The methods presented are interpretation- and context-free and can be used both in experimental analysis as well as in modeling problems.

Ntuen, Celestine A.↗

Interacting Surfaces and Atmospheres in the Outer Solar System

The work reported here is an extension of ongoing efforts in data reduction and modeling of the spectral reflectances of several objects in the outer Solar System. In general terms, this requires an evaluation of the data obtained at the telescope, conversion of those data into geometric albedo units, and the combination of individual spectrum segments into a complete spectrum over the wavelength interval of interest. The modeling effort to produce a synthetic spectrum of a given Solar System object requires the complex refractive indices (the optical constants) of candidate surface materials, including ices, minerals, and organic solids. Those indices are primarily available only through contacts with other researchers, including colleagues at NASA Ames and at other institutions. Once obtained, the indices must be convolved with the telescopic data and then used in a computational model to produce the required synthetic spectrum for comparison with the data obtained at the telescope. In this way, we reach a convergence on the chemical composition and microstructural properties of the surfaces of objects in the outer Solar System.

DalleOre, Cristina↗