Search NASA⌕ Search

SEARCH · Search NASA

Results for “temperature programmed desorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Reaction of Formic Acid over Amorphous Manganese Oxide Catalytic Systems: An In Situ Study

The interaction of formic acid with amorphous manganese oxide (AMO) is investigated using in situ photoelectron and infrared spectroscopy techniques. Soft X-ray photoelectron spectroscopy (sXPS) and in situ FTIR illustrate two possible modes of formate bound species at the AMO surface. Two peaks in the IR region from 1340-1390 cm{sup -1} are indicative of formate species bound to the surface in a bidentate configuration. However, a 224 cm{sup -1} band gap between v{sub s}OCO and v{sub as}OCO suggests formate is bound in a bridging configuration. Temperature-programmed desorption studies confirm the formate bound species desorbs as carbon dioxide from the surface at multiple binding sites. At temperatures above 700 K, the presence of K{sup +} {hor_ellipsis} OC complex suggests the bound species interacts at vacant sites related to framework oxygen and cation mobility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Observation of Fano line shapes in infrared vibrational spectra of CO{sub 2} adsorbed on Cu(997) and Cu(111)

Adsorption states of carbon dioxide on the Cu(997) and Cu(111) surfaces were investigated by infrared reflection absorption spectroscopy, temperature programmed desorption, and X-ray photoelectron spectroscopy. CO{sub 2} molecules are physisorbed on the Cu(997) surface at temperatures below 70 K; neither chemisorption nor dissociation of CO{sub 2} occurs on the Cu(997) surface at this low temperature. However, the vibrational spectra of adsorbed CO{sub 2} depend significantly on the substrate temperature and coverage. IR spectra of CO{sub 2} vibrational modes at 70 K show asymmetric Fano line shapes, while only normal absorption bands are observed when CO{sub 2} is adsorbed at 20 K. Fano line shapes are also observed for CO{sub 2} on Cu(111) at 85 K. The observation of Fano effect indicates the coupling between the electronic continuum states of the Cu surface and the internal vibrational modes of CO{sub 2} even in such physisorbed system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reaction of Formic Acid over Amorphous Manganese Oxide Catalytic Systems: An In Situ Study

The interaction of formic acid with amorphous manganese oxide (AMO) is investigated using in situ photoelectron and infrared spectroscopy techniques. Soft X-ray photoelectron spectroscopy (sXPS) and in situ FTIR illustrate two possible modes of formate bound species at the AMO surface. Two peaks in the IR region from 1340-1390 cm{sup -1} are indicative of formate species bound to the surface in a bidentate configuration. However, a 224 cm{sup -1} band gap between v{sub s}OCO and v{sub as}OCO suggests formate is bound in a bridging configuration. Temperature-programmed desorption studies confirm the formate bound species desorbs as carbon dioxide from the surface at multiple binding sites. At temperatures above 700 K, the presence of K{sup +} {hor_ellipsis} OC complex suggests the bound species interacts at vacant sites related to framework oxygen and cation mobility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Carbonic acid as a reserve of carbon dioxide on icy moons: The formation of carbon dioxide (CO{sub 2}) in a polar environment

Carbon dioxide (CO{sub 2}) has been detected on the surface of several icy moons of Jupiter and Saturn via observation of the ν{sub 3} band with the Near-Infrared Mapping Spectrometer on board the Galileo spacecraft and the Visible-Infrared Mapping Spectrometer on board the Cassini spacecraft. Interestingly, the CO{sub 2} band for several of these moons exhibits a blueshift along with a broader profile than that seen in laboratory studies and other astrophysical environments. As such, numerous attempts have been made in order to clarify this abnormal behavior; however, it currently lacks an acceptable physical or chemical explanation. We present a rather surprising result pertaining to the synthesis of carbon dioxide in a polar environment. Here, carbonic acid was synthesized in a water (H{sub 2}O)-carbon dioxide (CO{sub 2}) (1:5) ice mixture exposed to ionizing radiation in the form of 5 keV electrons. The irradiated ice mixture was then annealed, producing pure carbonic acid which was then subsequently irradiated, recycling water and carbon dioxide. However, the observed carbon dioxide ν{sub 3} band matches almost exactly with that observed on Callisto; subsequent temperature program desorption studies reveal that carbon dioxide synthesized under these conditions remains in solid form until 160 K, i.e., the sublimation temperature of water. Consequently, our results suggest that carbon dioxide on Callisto as well as other icy moons is indeed complexed with water rationalizing the shift in peak frequency, broad profile, and the solid state existence on these relatively warm moons.

79 ASTRONOMY AND ASTROPHYSICS↗

Photothermal alternative to device fabrication using atomic precision advanced manufacturing techniques

The attachment of dopant precursor molecules to depassivated areas of hydrogen-terminated silicon templated with a scanning tunneling microscope (STM) has been used to create electronic devices with subnanometer precision, typically for quantum physics experiments. This process, which we call atomic precision advanced manufacturing (APAM), dopes silicon beyond the solid-solubility limit and produces electrical and optical characteristics that may also be useful for microelectronic and plasmonic applications. However, scanned probe lithography lacks the throughput required to develop more sophisticated applications. In this work, we demonstrate and characterize an APAM device workflow where scanned probe lithography of the atomic layer resist has been replaced by photolithography. An ultraviolet laser is shown to locally and controllably heat silicon above the temperature required for hydrogen depassivation on a nanosecond timescale, a process resistant to under- and overexposure. STM images indicate a narrow range of energy density where the surface is both depassivated and undamaged. Modeling that accounts for photothermal heating and the subsequent hydrogen desorption kinetics suggests that the silicon surface temperatures reached in our patterning process exceed those required for hydrogen removal in temperature-programmed desorption experiments. A phosphorus-doped van der Pauw structure made by sequentially photodepassivating a predefined area and then exposing it to phosphine is found to have a similar mobility and higher carrier density compared with devices patterned by STM. Lastly, it is also demonstrated that photodepassivation and precursor exposure steps may be performed concomitantly, a potential route to enabling APAM outside of ultrahigh vacuum.

nanoscale devices↗

Plasma Facing Surface Composition During NSTX Li Experiments

Lithium conditioned plasma facing surfaces have lowered recycling and enhanced plasma performance on many fusion devices. However, the nature of the plasma-lithium surface interaction has been obscured by the difficulty of in-tokamak surface analysis. We report laboratory studies of the chemical composition of lithium surfaces exposed to typical residual gases found in tokamaks. Solid lithium and a molybdenum alloy (TZM) coated with lithium has been examined using x-ray photoelectron spectroscopy, temperature programmed desorption, and Auger electron spectroscopy both in ultrahigh vacuum conditions and after exposure to trace gases. Lithium surfaces near room temperature were oxidized after exposure to 1-2 Langmuirs of oxygen or water vapor. The oxidation rate by carbon monoxide was four times less. Lithiated PFC surfaces in tokamaks will be oxidized in about 100 s depending on the tokamak vacuum conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hydrogenation of Carbon Dioxide by Water: Alkali-Promoted Synthesis of Formate

Conversion of carbon dioxide utilizing protons from water decomposition is likely to provide a sustainable source of fuels and chemicals in the future. We present here a time-evolved infrared reflection absorption spectroscopy (IRAS) and temperature-programmed desorption (TPD) study of the reaction of CO{sub 2} + H{sub 2}O in thin potassium layers. Reaction at temperatures below 200 K results in the hydrogenation of carbon dioxide to potassium formate. Thermal stability of the formate, together with its sequential transformation to oxalate and to carbonate, is monitored and discussed. The data of this model study suggest a dual promoter mechanism of the potassium: the activation of CO{sub 2} and the dissociation of water. Reaction at temperatures above 200 K, in contrast, is characterized by the absence of formate and the direct reaction of CO{sub 2} to oxalate, due to a drastic reduction of the sticking coefficient of water at higher temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrogen desorption from hydrogen fluoride and remote hydrogen plasma cleaned silicon carbide (0001) surfaces

Due to the extreme chemical inertness of silicon carbide (SiC), in-situ thermal desorption is commonly utilized as a means to remove surface contamination prior to initiating critical semiconductor processing steps such as epitaxy, gate dielectric formation, and contact metallization. In-situ thermal desorption and silicon sublimation has also recently become a popular method for epitaxial growth of mono and few layer graphene. Accordingly, numerous thermal desorption experiments of various processed silicon carbide surfaces have been performed, but have ignored the presence of hydrogen, which is ubiquitous throughout semiconductor processing. In this regard, the authors have performed a combined temperature programmed desorption (TPD) and x-ray photoelectron spectroscopy (XPS) investigation of the desorption of molecular hydrogen (H{sub 2}) and various other oxygen, carbon, and fluorine related species from ex-situ aqueous hydrogen fluoride (HF) and in-situ remote hydrogen plasma cleaned 6H-SiC (0001) surfaces. Using XPS, the authors observed that temperatures on the order of 700–1000 °C are needed to fully desorb C-H, C-O and Si-O species from these surfaces. However, using TPD, the authors observed H{sub 2} desorption at both lower temperatures (200–550 °C) as well as higher temperatures (>700 °C). The low temperature H{sub 2} desorption was deconvoluted into multiple desorption states that, based on similarities to H{sub 2} desorption from Si (111), were attributed to silicon mono, di, and trihydride surface species as well as hydrogen trapped by subsurface defects, steps, or dopants. The higher temperature H{sub 2} desorption was similarly attributed to H{sub 2} evolved from surface O-H groups at ∼750 °C as well as the liberation of H{sub 2} during Si-O desorption at temperatures >800 °C. These results indicate that while ex-situ aqueous HF processed 6H-SiC (0001) surfaces annealed at <700 °C remain terminated by some surface C–O and Si–O bonding, they may still exhibit significant chemical reactivity due to the creation of surface dangling bonds resulting from H{sub 2} desorption from previously undetected silicon hydride and surface hydroxide species.

36 MATERIALS SCIENCE↗

Realistic multisite lattice-gas modeling and KMC simulation of catalytic surface reactions: Kinetics and multiscale spatial behavior for CO-oxidation on metal (100) surfaces

A realistic molecular-level description of catalytic reactions on single-crystal metal surfaces can be provided by stochastic multisite lattice-gas (msLG) models. This approach has general applicability, although in this report, we will focus on the example of CO-oxidation on the unreconstructed fcc metal (100) or M(100) surfaces of common catalyst metals M = Pd, Rh, Pt and Ir (i.e., avoiding regimes where Pt and Ir reconstruct). These models can capture the thermodynamics and kinetics of adsorbed layers for the individual reactants species, such as CO/M(100) and O/M(100), as well as the interaction and reaction between different reactant species in mixed adlayers, such as (CO + O)/M(100). The msLG models allow population of any of hollow, bridge, and top sites. This enables a more flexible and realistic description of adsorption and adlayer ordering, as well as of reaction configurations and configuration-dependent barriers. Adspecies adsorption and interaction energies, as well as barriers for various processes, constitute key model input. The choice of these energies is guided by experimental observations, as well as by extensive Density Functional Theory analysis. Model behavior is assessed via Kinetic Monte Carlo (KMC) simulation. We also address the simulation challenges and theoretical ramifications associated with very rapid diffusion and local equilibration of reactant adspecies such as CO. These msLG models are applied to describe adsorption, ordering, and temperature programmed desorption (TPD) for individual CO/M(100) and O/M(100) reactant adlayers. In addition, they are also applied to predict mixed (CO + O)/M(100) adlayer structure on the nanoscale, the complete bifurcation diagram for reactive steady-states under continuous flow conditions, temperature programmed reaction (TPR) spectra, and titration reactions for the CO-oxidation reaction. Extensive and reasonably successful comparison of model predictions is made with experimental data. Furthermore, we discuss the possible transition from traditional mean-field-type bistability and reaction kinetics for lower-pressure to multistability and enhanced fluctuation effects for moderate- or higher-pressure. Behavior in the latter regime reflects a stronger influence of adspecies interactions and also lower diffusivity in the higher-coverage mixed adlayer. We also analyze mesoscale spatiotemporal behavior including the propagation of reaction diffusion fronts between bistable reactive and inactive states, and associated nucleation-mediated transitions between these states. This behavior is controlled by complex surface mass transport processes, specifically chemical diffusion in mixed reactant adlayers for which we provide a precise theoretical formulation. The msLG models together with an appropriate treatment of chemical diffusivity enable equation-free heterogeneous coupled lattice-gas (HCLG) simulations of spatiotemporal behavior. In addition, msLG + HCLG modeling can describe coverage variations across polycrystalline catalysts surfaces, pressure variations across catalyst surfaces in microreactors, and could be incorporated into a multiphysics framework to describe mass and heat transfer limitations for high-pressure catalysis. (C) 2013 Elsevier Ltd. All rights reserved.

36 MATERIALS SCIENCE↗

Desorption of Benzene, 1,3,5-Trifluorobenzene, and Hexafluorobenzene from a Graphene Surface: The Effect of Lateral Interactions on the Desorption Kinetics

The desorption of benzene, 1,3,5-trifluorobenzene (TFB), and hexafluorobenzene (HFB) from a graphene covered Pt(111) substrate was investigated using temperature programmed desorption (TPD). All three species have well-resolved monolayer and second layer desorption peaks. The desorption spectra for submonolayer coverages of benzene and hexafluorobenzene are consistent with first-order desorption kinetics. In contrast, the submonolayer TPD spectra for 1,3,5- trifluorobenzene align on a common leading-edge which is indicative of zero-order desorption kinetics. The desorption behavior of the three molecules can be correlated with the strength of the quadrupole moments. Calculations (second-order Møller-Plesset perturbation and density functional theory) show that the potential minimum for coplanar TFB dimers is more than a factor of two greater than that for either benzene or HFB dimers. The calculations support the interpretation that benzene and HFB are less likely to form the two-dimensional islands that are needed for submonolayer zero-order desorption kinetics.

Smith, Ronald S.↗

Effects of temperature and surface contamination on D retention in ultrathin Li films on TZM

Here in this work, we investigate deuterium retention at the Mo-Li interface by studying thin Li films three monolayers thick on a TZM Mo alloy. Li films at temperatures between 315 and 460 K were exposed to a deuterium ion beam and D retention was measured using temperature programmed desorption. In the absence of oxygen, D is retained as LiD, and the relative amount of retained D decreases with increasing substrate temperature. In three-monolayer thick lithium oxide films, the amount of D retained was 2.5 times higher than the amount retained as LiD in the metallic Li film. However, oxygen reduces the thermal stability of D in the film, causing D 2 O and D 2 to be released from the surface at temperatures 150-200 K below the LiD decomposition temperature. These results highlight the importance of maintaining a metallic Li layer for high D retention in Li films on TZM at elevated temperatures.

36 MATERIALS SCIENCE↗

Alcohol-Induced Low-Temperature Blockage of Supported-Metal Catalysts for Enhanced Catalysis

The partial or complete blockage of active sites of metal nanoparticles (NPs) on supported-metal catalysts has been of interest for tuning the stability, selectivity, and rate of reactions. In this study, we show that Au-sites in Au/TiO 2 surprisingly become blocked upon treatment in common alcohols (2-propanol and methanol), with 2-propanol causing a greater extent of blockage. Nearly 95% of Au-sites are covered after treatment in 2-propanol at room temperature, followed by desorption at 150 °C. Infrared spectroscopy of CO adsorption unambiguously confirms the occurrence of this phenomenon. Electron energy loss spectroscopy (EELS), temperature-programmed desorption (TPD), Raman spectroscopy, and DFT simulations suggest that the formation of carbon deposits from 2-propanol decomposition and/or the migration of a TiO x layer over the supported NPs may be responsible for the blockage of Au-sites. Nearly full coverage of Au NPs after treatment in 2-propanol led to negligible activity for catalytic CO oxidation, whereas partial retraction of the overlayer led to enhanced activity with time-on-stream, suggesting a self-activating catalytic performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bond Selective Photochemistry at Metal Nanoparticle Surfaces: CO Desorption from Pt and Pd

The use of visible photon fluxes to influence catalytic reactions on metal nanoparticle surfaces has attracted attention based on observations of reaction mechanisms and selectivity not observed under equilibrium heating. These observations suggest that photon fluxes can selectively impact the rates of certain elementary steps, creating nonequilibrium energy distributions among various reaction pathways. However, quantitative studies validating these hypotheses on metal nanoparticle surfaces are lacking. Here, we examine the influence of continuous wave visible photon fluxes on the CO desorption rates from 1 to 2 nm diameter Pt and Pd nanoparticle surfaces supported on γ-Al 2 O 3 . Temperature-programmed desorption measurements quantified via diffuse reflectance infrared Fourier transform spectroscopy demonstrate that visible photon fluxes significantly enhanced the rate of CO desorption from Pt nanoparticles in a wavelength-dependent manner. 440 nm photons most efficiently promoted CO desorption from Pt nanoparticle surfaces, aligning with the excitation energy for the interfacial electronic transition within the Pt–CO bond. Conversely, visible photon fluxes had no measurable influence on CO desorption rates from Pd nanoparticle surfaces after accounting for photon-induced heating. Density functional theory calculations demonstrate that the Pt–CO bond exhibits a narrower LUMO resonance, stronger coupling between the photoexcitation and forces induced on the metal–C bond, and vibrational energy dissipation that more effectively couples to desorption as compared to Pd–CO. These results demonstrate the specificity photons provide in facilitating chemical reactions on metal nanoparticle surfaces and substantiate the idea that photon fluxes can steer processes and outcomes of catalytic reactions in ways not achievable by equilibrium heating.

desorption↗

Interaction of D2O with a Thick BaO Film: Formation of and Phase Transitions in Barium Hydroxides

The interaction of D2O with a thick BaO film (≥ 20 mono-layer equivalent (MLE)) on ultra-thin Al2O3/NiAl(110) was investigated with temperature programmed desorption (TPD) and infrared reflection absorption spectroscopy (IRAS). Upon D2O exposure of a thick BaO film amorphous barium hydroxide formed at room temperature that readily converted to crystalline Ba(OD)2 phases during annealing in ultra-high vacuum (UHV). The formation of crystalline hydroxide phases depends on the initial D2O exposure at 300 K. Following low D2O exposure at room temperature that results in the formation of amorphous barium hydroxide with no hydrating water, only the a-Ba(OD)2 phase was observed after 400 K annealing. The sample that was exposed to D2O extensively (i.e. hydrated amorphous barium hydroxide formed) showed a series of phase transformations as the sample was annealed to increasingly higher temperatures: amorphous- Ba(OD)2•xD2O (x>1)à b-Ba(OD)2.D2Oà b-Ba(OD)2àa-Ba(OD)2. The results of TPD experiments completely agreed with this phase transformation scheme: hydrating water molecules desorbed first at 425 K, allowing the formation of the b-Ba(OD)2.D2O phase. Desorption of water from b-Ba(OD)2.D2O at around 475 K leads to the formation of b-Ba(OD)2 and its subsequent conversion to a-Ba(OH)2. All the barium hydroxides thermally decomposed at T < 550 K. When the BaO film was exposed to D2O at 425 K crystalline b-Ba(OD)2 formed initially, which lead to the formation of a small amount of a-Ba(OD)2 as well at low D2O exposures. At high D2O exposures the dominant phase was b-Ba(OD)2.xD2O, and no a-phase was seen.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Desorption Kinetics of Carbon Dioxide from a Graphene Covered Pt(111) Surface

The interaction of carbon dioxide (CO2) with a graphene covered Pt(111) surface was investigated using temperature programmed desorption (TPD) and reflection absorption infrared spectroscopy (RAIRS). The TPD spectra show monolayer and multilayer desorption peaks, however, the multilayer peak is not well-separated from the monolayer peak. The TPD spectra for submonolayer and multilayer coverages align on separate common leading edges. This alignment is a signature of zero-order desorption kinetics. The RAIRS spectra for submonolayer coverages have a relatively sharp peak at ~2350 cm-1 which is assigned to the n 3 asymmetric stretch. The peak is observed at the onset of CO2 adsorption and the area of the peak increases linearly with coverage. This suggests that CO2 does not lie flat on the surface but instead has a component of its bond axis perpendicular to the graphene surface.

Smith, Ronald S.↗

Reaction of NO2 with a pure, thick BaO film: the effect of temperature on the nature of NOx species formed

The adsorption and reaction of NO2 on a thick (>30 ML), pure BaO film deposited onto an Al2O3/NiAl(110) substrate were investigated in the temperature range of 300 – 660 K using temperature programmed desorption (TPD), infrared reflection absorption spectroscopy (IRAS), and x-ray photoelectron spectroscopy (XPS) techniques. The adsorption of NO2 on BaO at room temperature results in the formation of nitrite-nitrate ion pairs. During thermal desorption the nitrite species decompose first, releasing an NO molecule and leaving an O on the surface, while nitrate species decompose in two steps at higher temperatures: at lower temperature as NO2 only, then, at higher temperature, as NO + O2. In cyclic experiments when the BaO film was exposed to NO2 at 300 K, followed by annealing to 575 K, a large amount of NOx was stored as nitrates, and no saturation was achieved even after the 10th adsorption/anneal cycle. This suggests the gradual conversion of the BaO film into barium nitrate clusters at elevated temperatures. The rate of nitrate formation increases as the sample temperature during NO2 exposure increases up to 610 K, while at even higher temperatures the amount of nitrates formed decreases. NO2 adsorption on the thick BaO film at 610 K results in the formation of strongly bound nitrates as the major NOx species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanistic insights into N 2 O formation as a side product in NH 3 -SCR over small pore Cu-zeolites

Here, the present contribution provides clarity to N 2 O formation mechanisms and key influencing factors during low temperature NH 3 -SCR, with the goal of enabling the rational design of advanced SCR catalysts with low greenhouse gas impact. By studying more than 50 small pore Cu-exchanged zeolite SCR catalyst samples, including model catalysts synthesized in our laboratories and state-of-the-art industrial catalysts, we explored a wide range of factors affecting N 2 O formation. These factors included Cu loading, support Si/Al ratio, support topology, catalyst aging, reaction temperature and reactant feed composition effects. We probed N 2 O formation under both steady-state SCR, and during NH 4 NO 3 decomposition via temperature programmed desorption (TPD). Finally, we used DFT to probe energetics of possible N 2 O formation pathways. Based on these studies, we confirm that low temperature N 2 O formation occurs via multiple reaction pathways that all involve NH 4 NO 3 and are supported by Cu moieties that facilitate in-situ NO oxidation to NO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗