Search NASA⌕ Search

SEARCH · Search NASA

Results for “terminal area”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

131 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Technical Evaluation of the Department of Energy Research and Development Activities in Underground Research Laboratories - 20287

Congress created the U.S. Nuclear Waste Technical Review Board (NWTRB) in the 1987 Nuclear Waste Policy Amendments Act (Public Law 100-203) to evaluate the technical and scientific validity of activities undertaken by the Secretary of Energy to implement the Nuclear Waste Policy Act. Since 2012, DOE has collaborated in research conducted in several underground research laboratories (URLs) located in Europe and Asia. According to DOE, these international collaborations have been beneficial to its spent nuclear fuel (SNF) and high-level waste radioactive (HLW) disposal research program, particularly after the termination of the Yucca Mountain repository program when DOE began generic research on alternative host rocks (crystalline, clay, and salt) and repository environments very different from those at Yucca Mountain. In accordance with its mandate, the NWTRB is reviewing the DOE research and development (R and D) activities related to URLs. The NWTRB's review is documented in a report to Congress and the Secretary of Energy that will be released in January 2020, and this paper summarizes the NWTRB review and findings. The NWTRB held a fact-finding meeting with DOE and subsequently held a workshop on international URL collaborations in April of 2019. Based on the presentations and discussions at the workshop and at the fact-finding meeting, as well as information from reports published by DOE and others, there are four principal findings related to DoE's URL-related R and D activities. First, DOE participation in URL-related international research greatly benefits the U.S. geologic disposal R and D program by furthering its understanding of generic and site-specific disposal issues relevant to alternative repository host rocks and environments. DOE-funded R and D activities also are benefiting the URL-related research of other countries, especially in the area of complex analytical and numerical model/software development. Second, the more developed repository programs in other countries have focused on creating and strengthening their safety cases and making them transparent to the public. Repository programs in other countries use URLs to explain the technical bases underlying their safety cases, periodically reassess knowledge gaps and define new activities to strengthen the technical bases, and demonstrate the technology that will allow implementation of the proposed safety concept. Third, countries with more developed geologic disposal programs have found domestic URLs essential to their repository programs. DOE needs domestic URLs to advance geologic disposal efforts over the next decades and further its ability to train the next generation of scientists, engineers, and skilled technical workers. Fourth, DoE's international URL collaborations have advanced its generic disposal R and D program, including development of modeling capabilities recognized internationally as state-of-the-art, but further work on its coupled thermal-hydrological-mechanical-chemical models and URL- and laboratory-based research can strengthen its program. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Drones for Decommissioning

The U.S. Nuclear Regulatory Commission has responsibility for regulating the safe decommissioning of facilities and sites to meet the License Termination Rule in 10 Code of Federal Regulations (CFR) Part 20, Standards for Protection Against Radiation, Subpart E “Radiological Criteria for License Termination.” Decommissioning is performed in accordance with 10 CFR Part 50, Domestic Licensing of Production and Utilization Facilities, as part of license termination (§50.82) and release of the facility or site for unrestricted use (§50.83). The guidance currently demonstrates the minimum requirements and necessary conditions for conducting radiological surveys by a person carrying a radiation detector(s). The Pacific Northwest National Laboratory (PNNL) evaluated the use of an unoccupied aerial vehicle (UAV) to conduct radiological surveys that could be used in decommissioning to potentially reduce time, cost, and worker safety compared to current survey methods. The objective of this project was to evaluate the performance and limitations of a UAV to support a decommissioning radiological survey and compare it to a radiological survey conducted by a human. The primary research questions of interest evaluated were: 1. Did observed UAV paths differ from human paths and, if so, how much? 2. Did survey path deviation affect survey results and, if so, how? 3. Were radiological measurements from human and UAV surveys significantly different? To answer these research questions, an experimental field was set up at PNNL’s 3440 test track, and it included radiological sources commonly surveyed during decommissioning: cobalt-60 (Co-60), cesium-137 (Cs-137), and americium-241 (Am-241). Nine check sources (three each of Am-241, Cs-137, and Co-60) with activities ranging from 3.54 µCi to 39.34 µCi were set over a path that also included an area for measuring background radiation. An Aurelia X6 UAV coupled with a GPS and lidar unit was used to conduct the radiological surveys. UAV and human surveys were conducted using two different NaI(Tl) scintillation radiation detectors (2 in. × 2 in. Ludlum, Inc. and 2 in. × 0.04 in. Alpha Spectra, Inc.) at a travel velocity of approximately 0.2 m/s at a low (15–40 cm median altitude) or high (87–105 cm median altitude) survey altitude. Since the survey velocity and altitude parameters were atypical for normal UAV operations, testing was done prior to conducting the radiological surveys to establish airworthiness, evaluate the navigation system, and establish flight control. Human and UAV surveys were paired according to the detector type and altitude regime to compare the survey data. The results of this proof-of-concept research determined that the UAV and human surveys followed similar survey paths and detected the radiological sources with no significant statistical difference (in 33 out of 36 surveys). However, further research is needed prior to deploying UAVs for decommissioning surveys.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2024

Influence of Annealing Temperature on the OER Activity of NiO(111) Nanosheets Prepared via Microwave and Solvothermal Synthesis Approaches

Earth-abundant transition metal oxides are promising alternatives to precious metal oxides as electrocatalysts for the oxygen evolution reaction (OER) and are intensively investigated for alkaline water electrolysis. OER electrocatalysis, like most other catalytic reactions, is surface-initiated, and the catalyst performance is fundamentally determined by the surface properties. Most transition metal oxide catalysts show OER activities that depend on the predominantly exposed crystal facets/surface structure. Therefore, the design of synthetic strategies to obtain the most active crystal facets is of significant research interest. In this work, rock salt NiO OER catalysts with (111) predominantly exposed facets were synthesized by a solvothermal (ST) method either heated under supercritical or microwave-assisted (MW) conditions. Particular emphasis was placed on the influence of the post annealing temperature on the structural configuration and OER activity to compare their catalytic performances. The as-prepared electrocatalysts are pure α-Ni hydroxides which were converted to rock salt NiO (111) nanosheets with hexagonal pores after heat treatment at different temperatures. The OER activity of the electrodes has been evaluated in 0.1 M KOH using geometric and intrinsic current densities via normalization by the disk area and BET area, respectively. The lowest overpotential at a geometric current density of 10 mA/cm 2 is found for samples pretreated by heating between 400 and 500 °C with a catalyst loading of 115 μg/cm 2 . Despite the very similar nature of the catalysts obtained from the two methods, the ST electrodes show a higher geometric and intrinsic current density for 500 °C pretreatment. The MW electrodes, however, achieve an optimal geometric current density for 400 °C pretreatment, while their intrinsic current density requires pretreatment over 600 °C. Interestingly, pretreated electrodes show consistently higher OER activity as compared to the poorly crystalline/less ordered hydroxide as-prepared electrocatalysts. Thus, our study highlights the importance of the synthesis method and pretreatment at an optimal temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Changes in Sedimentary Phosphorus Burial Following Artificial Eutrophication of Lake 227, Experimental Lakes Area, Ontario, Canada

Lake 227 of the Experimental Lakes Area (ELA) in Ontario, Canada has been fertilized with phosphorus (P) since 1969, which resulted in a rapid transition from oligotrophic to eutrophic conditions. Sediment cores collected from the oxygenated epilimnion and the mostly anoxic hypolimnion of this unique lake contain a historical record of the changes in sediment P speciation and burial rates across the trophic transition. To elucidate these changes, results of chemical extractions were combined with 210 Pb sediment dating, and with 31 P NMR, Mössbauer and XANES spectroscopies. Prior to 1969, organic P (P Org ) was the major sedimentary P sink in Lake 227. Eutrophication of the lake coincided with marked increases in the burial rate of total P (TP), as well as in the relative contribution of the NaHCO 3 -extractable P pool (humic-bound P, P Hum ). Together, P Hum and P Org account for ≥70% of total P burial in the sediments deposited since artificial fertilization started. The P Hum fraction likely comprises phosphate complexes with humic substances. The strong linear correlation between P and iron (Fe) extracted by NaHCO 3 implies a close association of the two elements in the humic fraction. Mössbauer and XANES spectra further indicate that most Fe in the post-1969 sediments remained in the Fe(III) oxidation state, which is attributed to the stabilization of reducible Fe by organic matter, in part via the formation of phosphate-Fe(III)-humic complexes. Importantly, our results show that the eutrophication experimentation of Lake 227 caused the accumulation of a large reservoir of reactive sediment P, which may continue to fuel internal P loading to the water column once artificial fertilization is terminated.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Low-cost Manufacturing of Semitransparent CdTe PV for Building Integration

Solar has been demonstrated to be a robust renewable energy source, constituting a significant portion of the United States’ renewable energy portfolio. Despite its growth across residential, commercial, and utility sectors over the past decades, it remains a small fraction of the overall energy infrastructure. Challenges persist in fully harnessing solar power to meet the nation's escalating energy demands. Among these challenges lies the hurdle of efficiently distributing large quantities of solar-generated electricity to densely populated regions with the highest energy needs and costs. Traditional utility-scale arrays demand extensive land, a luxury often unavailable in metropolitan areas. Consequently, installations must be situated at a distance, necessitating additional infrastructure for electricity transmission to service areas. While metropolitan landscapes lack sprawling open spaces suitable for conventional utility-scale solar deployment, they offer a different resource: windows. Semitransparent photovoltaic window technology has the potential to not only bolster the grid's energy capacity, but to also provide HVAC and economic advantages to building owners. However, commercial availability of building-integrated photovoltaic windows remains limited. Silicon based photovoltaics currently dominate the solar market but adapting them for use in windows poses a variety of engineering and economic challenges such as relatively low power density, high costs associated with custom manufacturing, and aesthetic considerations. Addressing these challenges, this project explored the use of laser ablation patterning to manufacture cost-effective, high-efficiency, semitransparent Cadmium Telluride photovoltaic modules. Results showcased the potential of this methodology in developing photovoltaic windows and other innovative semitransparent PV applications. The ablation manufacturing technique demonstrated great versatility in achieving different patterns and levels of visible light transmission, and the power loss due to ablation was nearly directly proportional to the amount of material removed. Furthermore, the manufacturing process for Cadmium Telluride modules already has established advantages in material and energy efficiency, and the conversion of a standard submodule to semitransparent essentially requires a single additional process step, ensuring scalability. It is important to note that during this work, Toledo Solar experienced substantial organizational upheaval stemming from a lawsuit with First Solar. An external investigation led the board of directors to remove and replace the previous management team, and several other members of the staff elected to depart as well, including the then acting Principle Investigator on this project. The remaining Toledo Solar team attempted to recover from the disruption and deliver on the remaining tasks, but upon its own review, the Department of Energy ruled the project in default and terminated the contract in December 2023.

14 SOLAR ENERGY↗