Search NASA⌕ Search

SEARCH · Search NASA

Results for “thermal perturbations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Plasma-Coupled Flow Reactor Studies of Low-Temperature Plasma Assisted Kinetics of Methanol Blended with CO2

Ignition technologies based on low-temperature plasmas (LTP) have the potential to operate next generation engines at elevated pressures and increased dilution limits promoting higher efficiencies. From a practical standpoint, research on LTP igniters has shown to enhance combustion and ignition, improve flame stability, and extend the dilution limits of combustion. All of the aforementioned gains are complemented with higher ignition efficiencies. However, the biggest challenge with incorporating this technology into engines is the knowledge gap of how exactly plasma chemistry effects can enhance the basic combustion phenomena. This coupled with the lack of validated kinetic mechanisms for plasma-combustion chemistry is the biggest obstruction to recognize efficient ignition, especially for application relevant fuels and biofuels. In order to comprehensively evaluate the effects of LTP on an oxygenated fuel specific system, this present study examines the kinetics of methanol plasma-assisted pyrolysis and oxidation using a custom-built plasma flow reactor (PFR). Experimental regimes are also further extended to understand the effects of adding CO2 to the mixture and its consequence on reaction kinetics. The PFR is installed with a dielectric-barrier discharge (DBD) configuration to induce LTP into the fuel mixture. Non-equilibrium plasmas are generated by high-voltage pulses (nearing 20 KV) administered by a plasma pulser at high-pulse repetition rates (up to 10 kHz). In order to better understand and isolate plasma chemistry and its effect on neutral chemistry, the experiments were carried out by heavily diluting reactive mixtures in nitrogen at near isothermal conditions. This suppresses the effect of exothermic reactions on chemistry allowing stable intermediates and products to be detected and quantified using ex-situ GC/MS diagnostic methods. Experiments were carried out at 0.5 atm pressure and over a wide range of temperatures from 523 K to 1203 K. Experimental results depicted the enhancement in intermediates production as well as overall lower temperatures required for complete fuel consumption in the plasma specific cases as opposed to their pure thermal counterpart. Formation of oxygenated and nitrile compounds specific to plasma assisted pyrolysis cases illustrated the efficacy of LTP to introduce new reaction pathways accelerating fuel decomposition. Increase in reactivity at lower temperatures is sought to be an effect induced by plasma chemistry postulating the acceleration in intermediates production. The onset of thermal ignition in plasma assisted oxidation is seen 200 K earlier than thermal oxidation highlighting efficient fuel conversion to final byproducts. Enhanced collisional processes afforded by LTP is seen to perturb reaction pathways between oxygenated fuel radicals and N-atoms to alter overall chemical reactivity. New insights into kinetics are gained from this study highlighting governing plasma assisted combustion (PAC) pathways for oxygenated fuel reaction chemistry. The results from this study can be used to develop future mechanisms specific to plasma chemistry which can bridge the mechanistic knowledge gap for LTP ignition so that future engines can adopt LTPs in their design for efficient combustion.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Thermal Effects on Far-Field Distributed Acoustic Strain-Rate Sensors

Summary Fiber-optic cables cemented outside of the casing of an unconventional well measure crosswell strain changes during fracturing of neighboring wells with low-frequency distributed acoustic sensing (LF-DAS). As a hydraulic fracture intersects an observation well instrumented with fiber-optic cables, the fracture fluid injected at ambient temperatures can cool a section of the sensing fiber. Often, LF-DAS and distributed temperature sensing (DTS) cables are run in tandem, enabling the detection of such cooling events. The increasing use of LF-DAS for characterizing unconventional hydraulic fracture completions demands an investigation of the effects of temperature on the measured strain response by LF-DAS. Researchers have demonstrated that LF-DAS can be used to extract the temporal derivative of temperature for use as a differential-temperature-gradient sensor. However, differential-temperature-gradient sensing is predicated on the ability to filter strain components out of the optical signal. In this work, beginning with an equation for optical phase shift of LF-DAS signals, a model relating strain, temperature, and optical phase shift is explicitly developed. The formula provides insights into the relative strength of strain and temperature effects on the phase shift. The uncertainty in the strain-rate measurements due to thermal effects is estimated. The relationship can also be used to quantify uncertainties in differential-temperature-gradient sensors due to strain perturbations. Additionally, a workflow is presented to simulate the LF-DAS response accounting for both strain and temperature effects. Hydraulic fracture geometries are generated with a 3D fracture simulator for a multistage unconventional completion. The fracture width distributions are imported by a displacement discontinuity method (DDM) program to compute the strain rates along an observation well. An analytic model is used to approximate the temperature in the fracture. Using the derived formulae for optical phase shift, the model outputs are then used to compute the LF-DAS response at a fiber-optic cable, enabling the generation of waterfall plots including both strain and thermal effects. The model results suggest that before, during, and immediately following a fracture intersecting a well instrumented with fiber, the strain on the fiber drives the LF-DAS signal. However, at later times, as completion fluid cools the observation well, the temperature component of the LF-DAS signal can be equal to or exceed the strain component. The modeled results are compared to a published field case in an attempt to enhance the interpretation of LF-DAS waterfall plots. Finally, we propose a sensing configuration to identify the events when “wet fractures” (fractures with fluids) intersect the observation well.

Engineering↗
DOE OSTI2025

Surrogate-driven Variance-based Sensitivity Analysis of Thermal Storage Tanks in Integrated Energy Systems

Sensitivity analysis and uncertainty quantification are essential steps for enhancing the accuracy of computational models by identifying and mitigating uncertainties. This study focuses on these steps for the Thermal Energy Delivery System at Idaho National Laboratory, specifically targeting the thermocline tank. Using a Modelica/Dymola simulation model, the study perturbed various design parameters and boundary conditions, including shape factor, porosity, outlet temperature, inlet mass flow rate, and system pressure, to predict and quantify uncertainty in the tank’s ax- ial temperature. A dataset of over 1,000 simulations was generated, and surrogate models were developed using the pyMAISE (Michigan Artificial Intelligence Standard Environment) library, which is an Automatic Machine Learning library for nuclear engineering applications. The optimal model, a feedforward neural network with two hidden layers, achieved an R2 score above 0.99 and a mean absolute error below 1 Kelvin. Sensitivity analyses using Sobol indices and Fourier amplitude sensitivity testing methods on this surrogate model revealed that the inlet mass flow rate at initial timestamps and porosity significantly impacts predicted temperatures across all sensors and time steps.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

Stimulated excitation of thermal diffusion waves in a magnetized plasma pressure filament

Results are presented from basic heat transport experiments using a magnetized electron temperature filament that behaves as a thermal resonator. Using a small cathode source, low energy electrons are injected along the magnetic field into the afterglow of a pre-existing plasma forming a hot electron filament embedded in a colder plasma. A series of low amplitude, sinusoidal perturbations are added to the cathode discharge bias that creates an oscillating heat source capable of driving large amplitude electron temperature oscillations. Langmuir probes are used to measure the amplitude and phase of the thermal wave field over a wide range of driver frequencies. The results are used to verify the excitation of thermal waves, confirm the presence of thermal resonances, and demonstrate the diagnostic potential of thermal waves through measurement of the parallel thermal diffusivity.

Karbashewski, S. (ORCID:000000034988492X)↗
DOE OSTI2021

Excitation of fishbone-like mode in tokamaks due to bounce resonances of trapped thermal ions

When the drift kinetic effect of thermal ions is taken into account, a high-frequency fishbone-like mode (FLM) is found to be driven unstable by trapped thermal ions (TTIs) in tokamak plasmas, according to self-consistent magneto-hydrodynamic (MHD)-kinetic hybrid modeling utilizing the MARS-K code [Liu et al., Phys. Plasmas 15, 112503 (2008)] as well as an analytic theory. It is found that, similar to energetic particles, TTIs can also stabilize the internal kink mode, whereas the FLM is excited when the effective beta of TTIs exceeds a threshold value. The real frequency of the FLM is comparable to the bounce frequency of TTIs. The mode structure of the FLM can be significantly different from the conventional step-like function for the associated plasma radial displacement. This drift kinetic induced modification of the mode structure near the q = 1 surface is captured by non-perturbative MHD-kinetic hybrid computations with MARS-K. Furthermore, the FLM can only be triggered by TTIs at sufficiently high thermal temperatures. Both the FLM and the internal kink can be stabilized by sufficiently fast plasma toroidal rotation and parallel sound wave damping. These two conditions of high thermal temperature and (fast) flow stabilization, though making it challenging to observe the TTI-driven FLM in present day experiments, are favorable for the mode excitation in future reactor scale devices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Methodology for Generating Covariance Data of Thermal Neutron Scattering Cross Sections

This paper details and implements a framework for evaluating thermal neutron scattering cross sections that provide S(α,β) data and covariance data for hydrogen in light water. This methodology involves perturbing model parameters of molecular dynamics potentials and fitting the simulation results to experimental data. The framework is general and can be applied to any material or simulation method. The fit is made using the Unified Monte Carlo method to experimentally measure double-differential scattering cross sections of light water at the Spallation Neutron Source at Oak Ridge National Laboratory. Mean values and covariance data were generated for model parameters, phonon density of states, double-differential cross sections, and total scattering cross sections. These posterior parameter values were very similar to their prior values with a maximum relative error of 0.54%. This falls within in the Unified Monte Carlo–calculated uncertainties on the order of 2.7%. Additionally, posterior double-differential cross sections agree favorably with ENDF/B-VIII.0 cross sections. The new thermal scattering law was tested by comparing it against benchmarks from the International Criticality Safety Benchmark Evaluation Project Handbook, which showed a slight improvement over the ENDF/B-VIII.0 library. Additionally, the covariance matrix of the phonon density of states was validated to confirm that the spread of k eff from the density of states used to generate the covariance matrix was similar to the spread of k eff from the density of states of the sampled covariance matrix.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Radiative cooling effects on reverse shocks formed by magnetized supersonic plasma flows

We study the structure of reverse shocks formed by the collision of supersonic, magnetized plasma flows driven by an inverse (or exploding) wire array with a planar conducting obstacle. We observe that the structure of these reverse shocks varies dramatically with wire material, despite the similar upstream flow velocities and mass densities. For aluminum wire arrays, the shock is sharp and well-defined, consistent with magneto-hydrodynamic theory. In contrast, we do not observe a well-defined shock using tungsten wires, and instead we see a broad region dominated by density fluctuations on a wide range of spatial scales. We diagnose these two very different interactions using interferometry, Thomson scattering, shadowgraphy, and a newly developed imaging refractometer that is sensitive to small deflections of the probing laser corresponding to small-scale density perturbations. We conclude that the differences in shock structure are most likely due to radiative cooling instabilities, which create small-scale density perturbations elongated along magnetic field lines in the tungsten plasma. These instabilities grow more slowly and are smoothed by thermal conduction in the aluminum plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Magnetized ablative Rayleigh-Taylor instability in three dimensions

Three-dimensional extended-magnetohydrodynamics simulations of the magnetized ablative Rayleigh-Taylor instability are presented. Previous two-dimensional (2D) simulations claiming perturbation suppression by magnetic tension are shown to be misleading, as they do not include the most unstable dimension. For perturbation modes along the applied field direction, the magnetic field simultaneously reduces ablative stabilization and adds magnetic tension stabilization; the stabilizing term is found to dominate for applied fields > 5 T, with both effects increasing in importance at short wavelengths. Additionally, for modes perpendicular to the applied field, magnetic tension does not directly stabilize the perturbation but can result in moderately slower growth due to the perturbation appearing to be 2D (albeit in a different orientation to 2D inertial confinement fusion simulations). In cases where thermal ablative stabilization is dominant the applied field increases the peak bubble-spike height. Resistive diffusion is shown to be important for short wavelengths and long timescales, reducing the effectiveness of tension stabilization.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Preliminary Monte Carlo and Thermal Hydraulic Analysis using a Hybrid ETF-Corrected-Diffusion Prediction Block

This paper builds upon previous work to accelerate the Picard iteration (PI) method typically applied for coupled Monte Carlo-Thermal hydraulic (MC-TH) solutions. Previously, the use of the generalized transfer functions (GTFs) to predict variation in macroscopic cross sections following a perturbation in TH properties was demonstrated for a subset of simple 3D problems. In addition, the reduced-order transport prediction block relied on the first order perturbation (FOP) method, which was shown to have computational overheads. Recent work replaced the FOP block with a 1-group nodal diffusion solver to eliminate these overheads. While the use of diffusion is desirable for large-scale problems, the new solver introduces significant homogenization error. This work aims to address this issue by using the Jacobian-Free Newton Krylov (JFNK) method to generate a set of super homogenization (SPH) factors to improve the accuracy of the diffusion solution. The SPH factors will be used in conjunction with an improved cross section prediction method – the expanded transfer function (ETF) method – to produce a highly accurate flux prediction for an axial 1D boiling water reactor (BWR) pincell following a large perturbation in moderator density. The ETF-corrected diffusion (ETF-CD) block is shown to be highly accurate for the 1D test case. Future work will investigate the accuracy of the method for a realistic 3D pressurized water reactor core.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

Optimal Chloride Salt Mixture for a Fusion Blanket

Deuterium-tritium fusion reactors cannot operate for a significant period without a closed tritium fuel cycle, according to a recent National Academies of Sciences (NAS) report on bringing fusion reactors to the US electrical grid. This fact places breeder blankets as one of the foundational systems for self-sustained fusion reactor operation. The typical functional requirements for a breeder blanket system include producing tritium, absorbing kinetic energy, transporting thermal energy, and being environmentally attractive. State-of-the-art research on liquid blankets has converged to primarily focus on (LiF) 2 and BeF 2 (FLiBe) molten salts and a metallic eutectic of lead and lithium (PbLi), but “virtually all of the technologies related to the tritium fuel cycle are at a low technological readiness level”. This work sought to explore optimum blanket configurations as it aligned with the Oak Ridge National Laboratory (ORNL) FY 2023 Laboratory Directed Research and Development Program’s research priority of developing and expanding the current understanding of fusion blanket science and technology. This purpose of this work was to address ORNL research priorities and NAS recommendations by investigating novel liquid blanket materials that could provide self-sustaining operation and draw on experience from research on molten salts used for advanced fission reactors, concentrated solar, and thermal energy storage. The hypothesis when proposing this research was that there could be chloride-based blanket designs that can exceed the tritium breeding ratios of (FLiBe) molten salt blankets while reducing the use of Be (FLiBe), avoiding the generation of HF (FLiBe), and minimizing magnetohydrodynamic (MHD)-perturbed flow fields (PbLi). The fastest and most cost-effective path to deploying liquid fusion breeder blankets could be from maximizing the synergistic technological overlap between fusion, fission, concentrated solar, and thermal energy storage industries.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Drift-kinetic effects of tungsten on plasma response to RMP in ITER

Here, effects of high- Z ( Z is the particle charge number) tungsten impurity ions on the plasma response to the resonant magnetic perturbation (RMP) field are numerically investigated for the ITER 15 MA baseline scenario, where the tungsten contribution to the plasma response is computed with a drift-kinetic model while the bulk thermal particle contributions follow the fluid approximation. The study yields three highlights: (i) the drift-kinetic contribution of the tungsten impurity exerts minor influence on the plasma response compared to that computed by the pure fluid model without tungsten; (ii) a new figure of merit, based on the resonant spectrum perturbation at the plasma boundary surface, results in different optimal coil phasing compared to that previously obtained by maximizing the edge-peeling plasma response; (iii) the optimal $n = 3$ RMP (for edge localized mode (ELM) control, $n$ is the toroidal mode number) is found to induce a large tungsten particle influx near the plasma edge associated with the neoclassical toroidal viscosity. The study thus provides useful data on the compatibility of the full tungsten wall with RMP ELM control in ITER.

ITER↗
DOE OSTI2020

Interpretive MHD modeling of dispersive shell pellet injection for rapid shutdown in tokamaks

Dispersive shell pellet (DSP) injection is modeled with the extended-MHD code NIMROD for interpretive insight into the results of recent DIII-D DSP experiments and to explore the dynamics of an inside-out thermal quench for disruption mitigation in tokamaks. Simulations of the pre-thermal quench (TQ) phase indicate that the upper bound for the quantity of ablated carbon shell material that will not perturb the flux surfaces is in the ballpark of, but somewhat below the experimental quantity. Even below this quantity, sufficient electrons are added to the plasma by the shell material to produce significant dilution cooling before the TQ is triggered. Simulations carried through the end of the TQ have very large amplitude MHD fluctuations (δB/B>10 -2 ) at the time of the plasma current spike associated with current profile redistribution. Finally, after the plasma current spike, which is of comparable amplitude to that measured in DIII-D experiments, none of the runaway electron test-particles whose orbits are tracked throughout the simulation remain confined.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Perturbative instability of nonergodic phases in non-Abelian quantum chains

An important challenge in the field of many-body quantum dynamics is to identify nonergodic states of matter beyond many-body localization (MBL). Strongly disordered spin chains with non-Abelian symmetry and chains of non-Abelian anyons are natural candidates, as they are incompatible with standard MBL. In such chains, real space renormalization group methods predict a partially localized, nonergodic regime known as a quantum critical glass (a critical variant of MBL). Here, this regime features a treelike hierarchy of integrals of motion and symmetric eigenstates with entanglement entropy that scales as a logarithmically enhanced area law. We argue that such tentative nonergodic states are perturbatively unstable using an analytic computation of the scaling of off-diagonal matrix elements and accessible level spacing of local perturbations. Our results indicate that strongly disordered chains with non-Abelian symmetry display either spontaneous symmetry breaking or ergodic thermal behavior at long times. We identify the relevant length and timescales for thermalization: Even if such chains eventually thermalize, they can exhibit nonergodic dynamics up to parametrically long timescales with a nonanalytic dependence on disorder strength.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Nonperturbative Guiding Center Model for Magnetized Plasmas

Perturbative guiding center theory adequately describes the slow drift motion of charged particles in the strongly magnetized regime characteristic of thermal particle populations in various magnetic fusion devices. However, it breaks down for particles with large-enough energy. Here, we report on a data-driven method for learning a nonperturbative guiding center model from full-orbit particle simulation data. We show the data-driven model significantly outperforms traditional asymptotic theory in magnetization regimes appropriate for fusion-born α particles in stellarators, thus opening the door to nonperturbative guiding center calculations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Phase 1 Specifications and preliminary sensitivity analyses of the OECD-NRC liquid metal fast reactor core thermal-hydraulics benchmark

The developments in wire-wrapped fuel bundle thermal-hydraulics research have become increasingly diverse and this makes comparisons across studies difficult. This paper describes an ongoing benchmark that will address this issue by directly comparing computational results with experimental data from two unique wire-wrapped thermal-hydraulic facilities. Preliminary subchannel sensitivity / uncertainty analyses show largely expected behavior for the presented cases, where rod diameter and friction factor show the greatest sensitivities to geometrical perturbations. Guidelines for computational fluid dynamics evaluations have been prepared and highlight the need for consolidated modeling strategies. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2021

Observational Signatures of Planets in Protoplanetary Disks: Temperature Structures in Spiral Arms

High-resolution imaging of protoplanetary disks has unveiled a rich diversity of spiral structure, some of which may arise from disk-planet interaction. Using 3D hydrodynamics with β cooling to a vertically stratified background, as well as radiative-transfer modeling, we investigate the temperature rise in planet-driven spirals. In rapidly cooling disks, the temperature rise is dominated by a contribution from stellar irradiation, 0.3%–3% inside the planet radius but always < 0.5% outside. When cooling time equals or exceeds dynamical time, however, this is overwhelmed by hydrodynamic PdV work, which introduces a ~10%–20% perturbation within a factor of ~2 from the planet’s orbital radius. We devise an empirical fit of the spiral amplitude Δ(T)=(M{sub p}/M{sub th}){sup c}(f{sub PdV}e{sup -t{sub a}{sub r}{sub m}/t{sub c}}+f{sub rad}) to take into account both effects. Where cooling is slow, we find also that temperature perturbations from buoyancy spirals—a strictly 3D, nonisothermal phenomenon—become nearly as strong as those from Lindblad spirals, which are amenable to 2D and isothermal studies. Our findings may help explain observed thermal features in disks like TW Hydrae and CQ Tauri, and underscore that 3D effects have a qualitatively important effect on disk structure.

42 ENGINEERING↗
DOE OSTI2020

Aerosol Impacts on Mesoscale Convective Systems Forming Under Different Vertical Wind Shear Conditions

Following our previous study of wind shear effect on mesoscale convective system (MCS) organization under a clean atmospheric condition using the Weather Research and Forecasting model coupled with Spectral-Bin Microphysics, we conduct sensitivity simulations by increasing cloud condensation nuclei (CCN) concentration and investigate aerosol impacts on MCSs forming under different wind shear conditions. We find that, aerosols induce stronger updrafts and downdrafts in all MCSs. The stronger updrafts and enlarged convective core area contribute to larger vertical mass fluxes and enhance precipitation, indicating convective invigoration. Increased updraft speed below 8-km altitude mainly results from enhanced condensational heating, and increased water loading effect is not large enough to overcome the increase in thermal buoyancy. Interestingly, above 8-km altitude we see reduced updraft speed by the increased aerosols due to reduced vertical pressure perturbation gradient force, and weakened depositional growth due to competition of water vapor by enhanced condensation. The accumulated rainfall and mean rain rate are increased, with an increased occurrence frequency of heavy rain. The increase of rain rate is seen in both convective and stratiform regions, with a more significant increase in convective rain rate. In general, we see a higher frequency of deep convective cloud in the polluted condition because of invigorated convection, and more stratiform/anvil clouds, but a lower frequency of shallow warm clouds. The unanimously invigorated MCSs by aerosols under various wind shear conditions revealed by this study has an important implication in weather and climate at warm and humid regions that are influenced by pollution.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Bohm Criterion of Plasma Sheaths away from Asymptotic Limits

The plasma exit flow speed at the sheath entrance is constrained by the Bohm criterion. The so-called Bohm speed regulates the plasma particle and power exhaust fluxes to the wall, and it is commonly deployed as a boundary condition to exclude the sheath region in quasineutral plasma modeling. In this work, the Bohm criterion analysis is performed in the intermediate plasma regime away from the previously known limiting cases of adiabatic laws and the asymptotic limit of infinitesimal Debye length in a finite-size system, using the transport equations of an anisotropic plasma. The resulting Bohm speed has explicit dependence on local plasma heat flux, temperature isotropization, and thermal force. Comparison with kinetic simulations demonstrates its accuracy over the plasma-sheath transition region in which quasineutrality is weakly perturbed and the Bohm criterion applies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗