Search NASA⌕ Search

SEARCH · Search NASA

Results for “tool influence function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

An analysis of CCD images of the coma of Comet Halley

The analysis of selected CCD images of the coma of comet P/Halley is presented. The images were taken using specially designed filters that isolate regions of a comet's spectrum such that only sunlight which has been scattered by the dust in the coma is recorded. The modeling analysis objective is to make use of the skills developed in the development of Monte Carlo particle trajectory models for the distributions of gas species in cometary comae and to use those models as a basis for a new dust coma model. This model will include a self-consistant picture of the time-dependent dusty-gas dynamics of the inner coma and the three-dimensional time-dependent trajectories of the dust particles under the influence of solar gravity and solar radiation pressure in the outer coma. The model is intended to be used as a tool to analyze selected images from the two sets of CCD images with the hope that it will help the understanding of the effects of a number of important processes on the spatial morphology of the observed dust coma. The processes of importance to the observed dust coma include: (1) the dust particle size distribution function; (2) the terminal velocities of various sized dust particles in the inner coma; (3) the radiation scattering properties of dust particles, which are important both in terms of the observe scattered radiation and the radiation pressure acceleration on dust particles; (4) the fragmentation and/or vaporization of dust particles; and (5) the relative importance of CHON and silicate dust particles as they contribute both to the dusty-gasdynamics in the inner coma (that produce the dust particle terminal velocities) and to the observed spatial morphology on the outer dust coma.

Combi, Michael↗

"Source Term Modeling for Advanced Gas Micro-Reactors"

Maintaining the safety of the public, environment, and operating personnel is the most important factor in designing, operating, maintaining, and decommissioning nuclear reactors. In recent years, there has been a growing interest in the development of micro-reactors employing TRi-structural ISOtropic (TRISO)-coated particle fuel. In gas reactors, TRISO fuel plays an important role in the safety case for high temperature reactors because of the fission product retention properties of the fuel. This ability enables the use of a functional containment strategy for the reactor where multiple barriers are used to prevent fission product release to the environment. Part of the safety analysis of these advanced reactors is the assessment of radionuclide releases under normal and accident conditions through the multiple credited safety barriers. Using conservative assumptions, a mechanistic analysis can be performed to quantify these releases that combines the probabilistic assessment of failure with analytic solutions to radionuclide transport equations. Source term modeling for TRISO fuel has been performed for previous reactor designs; however, these models are outdated, in many cases proprietary, and need updates to be applied to the current state of TRISO fuel technology and alternative gas reactor core configurations [1]. Currently, the only publicly available source term assessment for gas reactors is an expert-based Monte Carlo simulation based on the effectiveness of the fuel kernel, coating layers, and graphite block in a modular high temperature gas reactor [2]. Thus, there is a need to develop a simple, versatile, and mechanistic model of fission product release and transport in gas reactor cores that could be applied to a variety of reactors through user inputs and reactor-specific radionuclide inventories. The release is calculated by the diffusion of the key safety important fission products through the kernel, silicon carbide (SiC), graphite for both intact and defective TRISO particles based on fuel and graphite temperatures in the reactor under normal operation. These releases from the fuel enter the coolant where they can plate-out on cooler surfaces. A clean-up model is included for designs with a coolant purification system to remove fission gases. This initial distribution of fission products in the reactor serves as an initial condition for potential releases under postulated accident conditions. The model then can calculate the fission product release for any transient temperature profile and fission product releases can then be used to assess radiological dose to the workers and the public using conventional dose tools. Data on the diffusion of fission products is based on historic German TRISO experiments and the more current Department of Energy (DOE) Advanced Gas Reactor (AGR) TRISO fuel development program. The model is coded in python with inputs and outputs in excel spreadsheets, as well as python plotting utilities to aid in the interpretation of the results. References: [1] INL, NGNP Mechanistic Source Term White Paper, INL-10-17997, July 2010. [2] David A. Petti, Richard R. Hobbins, Peter Lowry, Hans Gougar, “Representative Source Terms and The Influence of Reactor Attributes on Functional Containment in Modular High Temperature Gas-cooled Reactors,” Nuclear Technology, Vol. 184, p. 181-197, Nov. 2013.

07 ISOTOPE AND RADIATION SOURCES↗

XPS Protocol for the Characterization of Pristine and Functionalized Single Wall Carbon Nanotubes

Recent interest in developing new applications for carbon nanotubes (CNT) has fueled the need to use accurate macroscopic and nanoscopic techniques to characterize and understand their chemistry. X-ray photoelectron spectroscopy (XPS) has proved to be a useful analytical tool for nanoscale surface characterization of materials including carbon nanotubes. Recent nanotechnology research at NASA Johnson Space Center (NASA-JSC) helped to establish a characterization protocol for quality assessment for single wall carbon nanotubes (SWCNTs). Here, a review of some of the major factors of the XPS technique that can influence the quality of analytical data, suggestions for methods to maximize the quality of data obtained by XPS, and the development of a protocol for XPS characterization as a complementary technique for analyzing the purity and surface characteristics of SWCNTs is presented. The XPS protocol is then applied to a number of experiments including impurity analysis and the study of chemical modifications for SWCNTs.

Sosa, E. D.↗

The Influence of High Pressure Thermal Behavior on Friction-induced material transfer During Dry Machining of Titanium

In this paper we study failure of coated carbide tools due to thermal loading. The study emphasizes the role assumed by the thermo-physical properties of the tool material in enhancing or preventing mass attrition of the cutting elements within the tool. It is shown that within a comprehensive view of the nature of conduction in the tool zone, thermal conduction is not solely affected by temperature. Rather it is a function of the so called thermodynamic forces. These are the stress, the strain, strain rate, rate of temperature rise, and the temperature gradient. Although that within such consideration description of thermal conduction is non-linear, it is beneficial to employ such a form because it facilitates a full mechanistic understanding of thermal activation of tool wear.

36 MATERIALS SCIENCE↗

Combining chemistry and protein engineering for new-to-nature biocatalysis

Biocatalysis, the application of enzymes to solve synthetic problems of human import, has blossomed into a powerful technology for chemical innovation. In the past decade, a threefold partnership, where nature provides blueprints for enzymatic catalysis, chemists introduce innovative activity modes with abiological substrates, and protein engineers develop new tools and algorithms to tune and improve enzymatic function, has unveiled the frontier of new-to-nature enzyme catalysis. In this Perspective, we highlight examples of interdisciplinary studies, which have helped to expand the scope of biocatalysis, including concepts of enzymatic versatility explored through the lens of biomimicry, to achieve activities and selectivities beyond those currently possible with chemocatalysis. We indicate how modern tools, such as directed evolution, computational protein design and machine learning-based protein engineering methods, have already impacted and will continue to influence enzyme engineering for new abiological transformations. As a result, a sustained collaborative effort across disciplines is anticipated to spur further advances in biocatalysis in the coming years.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Automating methods for estimating metabolite volatility

The volatility of metabolites can influence their biological roles and inform optimal methods for their detection. Yet, volatility information is not readily available for the large number of described metabolites, limiting the exploration of volatility as a fundamental trait of metabolites. Here, we adapted methods to estimate vapor pressure from the functional group composition of individual molecules (SIMPOL.1) to predict the gas-phase partitioning of compounds in different environments. We implemented these methods in a new open pipeline called volcalc that uses chemoinformatic tools to automate these volatility estimates for all metabolites in an extensive and continuously updated pathway database: the Kyoto Encyclopedia of Genes and Genomes (KEGG) that connects metabolites, organisms, and reactions. We first benchmark the automated pipeline against a manually curated data set and show that the same category of volatility (e.g., nonvolatile, low, moderate, high) is predicted for 93% of compounds. We then demonstrate how volcalc might be used to generate and test hypotheses about the role of volatility in biological systems and organisms. Specifically, we estimate that 3.4 and 26.6% of compounds in KEGG have high volatility depending on the environment (soil vs. clean atmosphere, respectively) and that a core set of volatiles is shared among all domains of life (30%) with the largest proportion of kingdom-specific volatiles identified in bacteria. With volcalc , we lay a foundation for uncovering the role of the volatilome using an approach that is easily integrated with other bioinformatic pipelines and can be continually refined to consider additional dimensions to volatility. The volcalc package is an accessible tool to help design and test hypotheses on volatile metabolites and their unique roles in biological systems.

59 BASIC BIOLOGICAL SCIENCES↗

Moment expansion for ionospheric range error

On a plane earth, the ionospheric or tropospheric range error depends only on the total refractivity content or zeroth moment of the refracting layer and the elevation angle. On a spherical earth, however, the dependence is more complex; so for more accurate results it has been necessary to resort to complex ray-tracing calculations. A simple, high-accuracy alternative to the ray-tracing calculation is presented. By appropriate expansion of the angular dependence in the ray-tracing integral in a power series in height, an expression is obtained for the range error in terms of a simple function of elevation angle, E, at the expansion height and of the mth moment of the refractivity, N, distribution about the expansion height. The rapidity of convergence is heavily dependent on the choice of expansion height. For expansion heights in the neighborhood of the centroid of the layer (300-490 km), the expansion to N = 2 (three terms) gives results accurate to about 0.4% at E = 10 deg. As an analytic tool, the expansion affords some insight on the influence of layer shape on range errors in special problems.

Mallinckrodt, A.↗

Structural properties of PbTe quantum dots revealed by high-energy x-ray diffraction

High-energy x-ray diffraction (HE-XRD) experiments combined with an analysis based on atomic-pair-distribution functions can be an effective tool for probing low-dimensional materials. Here, we show how such an analysis can be used to gain insight into structural properties of PbTe nanoparticles (NPs). Here we interpret our HE-XRD data using an orthorhombic Pnma phase of PbTe, which is an orthorhombic distortion of the rocksalt phase. Although local crystal geometry can vary substantially with particle size at scales below 10 nm, and for very small NPs the particle size itself influences x-ray diffraction patterns, our study shows that HE-XRD can provide a unique nano-characterization tool for unraveling structural properties of nanoscale systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Microstructure in the extreme environment: understanding and predicting dynamic damage processes

The future of materials science: strategic application for functionally controlled materials properties is emphasized by the need to control material performance in extreme environments. To this end, this study examines the separate effects of kinetics (in the form of dynamic loading rate and shock wave shape) from that of length-scale effects (in the form of microstructural defect distributions). Recently available mesoscale modeling techniques are being used to capture a physical link between kinetic and length-scale influences on dynamic loading. This work contributes innovative new tools in the form of shock-wave shaping techniques in dynamic experimentation, materials characterization, lending insight into 3D damage field analysis at micron resolution, and the physics necessary to provide predictive capabilities for dynamic damage evolution. Experimental results tailored for the discreet understanding of length-scale and kinetic effects during dynamic loading are obtained to provide the basis for the development of process-aware material performance models. The understanding of length-scale and kinetic effects in extreme environments of dynamic loading advances the understanding of current emerging issues relevant to phenomena such as inclusion related failure in metals, grain size dependence on ejecta, and benefits of interfaces in mitigating defect development specifically driven by the need to tailor material response. Finally, the coupling of experimental techniques with theory and simulation is aimed at advancing process-aware damage modeling as well as transitioning materials science from observation to property control.

36 MATERIALS SCIENCE↗

Modeling the impact of liana infestation on the demography and carbon cycle of tropical forests

There is mounting empirical evidence that lianas affect the carbon cycle of tropical forests. However, no single vegetation model takes into account this growth form, although such efforts could greatly improve the predictions of carbon dynamics in tropical forests. In this study, we incorporated a novel mechanistic representation of lianas in a dynamic global vegetation model (the Ecosystem Demography Model). We developed a liana-specific plant functional type and mechanisms representing liana-tree interactions (such as light competition, liana-specific allometries, and attachment to host trees) and parameterized them according to a comprehensive literature meta-analysis. We tested the model for an old-growth forest (Paracou, French Guiana) and a secondary forest (Gigante Peninsula, Panama). The resulting model simulations captured many features of the two forests characterized by different levels of liana infestation as revealed by a systematic comparison of the model outputs with empirical data, including local census data from forest inventories, eddy flux tower data, and terrestrial laser scanner-derived forest vertical structure. The inclusion of lianas in the simulations reduced the secondary forest net productivity by up to 0.46 t C ha -1 year -1 , which corresponds to a limited relative reduction of 2.6% in comparison with a reference simulation without lianas. However, this resulted in significantly reduced accumulated above-ground biomass after 70 years of regrowth by up to 20 t C /ha (19% of the reference simulation). Ultimately, the simulated negative impact of lianas on the total biomass was almost completely cancelled out when the forest reached an old-growth successional stage. Our findings suggest that lianas negatively influence the forest potential carbon sink strength, especially for young, disturbed, liana-rich sites. In light of the critical role that lianas play in the profound changes currently experienced by tropical forests, this new model provides a robust numerical tool to forecast the impact of lianas on tropical forest carbon sinks.

59 BASIC BIOLOGICAL SCIENCES↗

Component-Level Analysis of Heating and Cooling Loads in the U.S. Residential Building Stock

The residential building sector accounts for a substantial portion of total energy consumption in the United States and offers a significant opportunity for energy reduction and decarbonization through improvements in energy efficiency. Heating and air conditioning are the primary contributors to residential energy usage and electricity system peak demand. However, due to the diversity of the housing stock and the complexity of factors affecting heating and cooling demand, identifying the relative contributions to heating and cooling loads poses challenges. To address this, we applied the ResStock analysis tool to simulate 550,000 building energy models, providing statistical representation of residential buildings in the contiguous United States. We introduced outputs that quantified the heating and cooling influence of different components of a home, such as air leakage, envelope components (ceilings, walls, windows, foundations), internal heat gains from people, lighting, plug loads, and duct losses and gains. Leveraging the granularity of ResStock, we present a dataset to enable deeper understanding of the contributors to heating and cooling loads as a function of housing characteristics such as location, envelope efficiency, and building type. This work aims to support prioritization of research and development and informed decision-making for residential building decarbonization.

building simulation↗

Turbulence Effects on Shaped Booms: Propagation Simulations Using KZKFourier

Upcoming X-59 aircraft flight tests as part of NASA’s Quesst Mission are expected to occur in a range of atmospheric conditions. Sensitivity of ground waveform acoustic metrics to turbulent perturbations during propagation complicates the determination of noise levels. A series of simulations through turbulence was executed using the KZKFourier model of Stout et al. to develop a database of results for expanding the functionality of NASA tools for estimating turbulence effects on shaped-boom ground waveforms. For 45 cases covering a seven-factor design space, multiple realizations of turbulence were generated to characterize statistical turbulence effects on levels of six acoustic metrics. An individual simulation in the study produced over one thousand waveforms across a virtual microphone array. Different measures were used to evaluate refinement of results with increasing number of simulations. Data suggest that mean effects and variability were most strongly influenced by propagation distance and velocity fluctuation intensity. Although local increases in acoustic metrics were common, the overall average result in all cases was a reduction in metric levels. Sensitivity of acoustic metrics varied, with mean reductions of up to 2 dB in Perceived Level occurring across the 45 cases.

turbulence↗

Impact of hollow-atom formation on coherent x-ray scattering at high intensity

X-ray free-electron lasers (FELs) are promising tools for structural determination of macromolecules via coherent x-ray scattering. During ultrashort and ultraintense x-ray pulses with an atomic-scale wavelength, samples are subject to radiation damage and possibly become highly ionized, which may influence the quality of x-ray scattering patterns. We develop a toolkit to treat detailed ionization, relaxation, and scattering dynamics for an atom within a consistent theoretical framework. The coherent x-ray scattering problem including radiation damage is investigated as a function of x-ray FEL parameters such as pulse length, fluence, and photon energy. We find that the x-ray scattering intensity saturates at a fluence of {approx}10{sup 7} photon/A{sup 2} per pulse but can be maximized by using a pulse duration much shorter than the time scales involved in the relaxation of the inner-shell vacancy states created. Under these conditions, both inner-shell electrons in a carbon atom are removed, and the resulting hollow atom gives rise to a scattering pattern with little loss of quality for a spatial resolution >1 A. Our numerical results predict that in order to scatter from a carbon atom 0.1 photon per x-ray pulse, within a spatial resolution of 1.7 A, a fluence of 1x10{sup 7} photons/A{sup 2} per pulse is required at a pulse length of 1 fs and a photon energy of 12 keV. By using a pulse length of a few hundred attoseconds, one can suppress even secondary ionization processes in extended systems. The present results suggest that high-brightness attosecond x-ray FELs would be ideal for single-shot imaging of individual macromolecules.

74 ATOMIC AND MOLECULAR PHYSICS↗

Final report for Collaborative Research on Ecophysiological Controls on Amazonian Precipitation Seasonality and Variability

The principal objective of our project is to address how vegetation influences climate variability and precipitation over Amazonian rainforests, with an emphasis on plant physiological controls on deep convection triggering along a geographical water stress gradient. Using a new tool of sun-induced chlorophyll fluorescence (SIF), our study integrates plant physiological observations and climate modeling and aims to decrease the gap between field ecology and climate modeling. We have installed sensors at Manaus site (K34) and at Rebio Jaru (Ji-Paraná, Rondonia). From field observations, we found a diversity of hydraulic functioning, indicating that within the same forest we will find different responses to the predicted climatic changes. The hydraulic strategies varied through a continuum of hydraulic security and water transport efficiency, which can be related to a long process of taxa evolution. The fact that taller trees are more hydraulically vulnerable indicates that if these forests go through higher drought conditions and temperature increase, they could experience a massive tree mortality that will promote changes on forest structure, changing the ecosystem functions, such as water fluxes and carbon storage. To investigate the role of water stress on the onset of the rainy season, we have developed high-resolution cloud resolving model (CRM) simulations using a new strategy coupling convective and large-scales. The first results show that the presence of early morning fog reduces the wet season transpiration and carbon uptake over the everwet regions of Amazonia. We have incorporated SIF into CLM to constrain energy, carbon and water flux of tropical forests. By using CloudSat-observed cloud vertical structure, we show an empirical relationship between atmospheric energetics and convective clouds in Amazonia, in comparison with the savanna/shrubland and tropical West Pacific, emphasizing predominant deep convection during the early wet season when Bowen ratio and convective available potential energy (CAPE) increase. Although on average the deep convections are prominent only during the short dry-to-wet transition while shallow/congestus clouds dominate the rest of the year in Amazonia, there is a clear cloud regime shift when CAPE grows beyond a threshold value. Our project helped initiate and maintain collaboration between US and Brazilian scientists. We have been collaborating through yearly field campaigns, weekly international research meetings, and ongoing other collaborative projects. Through these activities, we helped our students and postdocs fill their knowledge gaps and learn new research techniques.

54 ENVIRONMENTAL SCIENCES↗

Collaborative Research on Ecophysiological Controls on Amazonian Precipitation Seasonality and Variability (Final Technical Report)

The principal objective of our project is to address how vegetation influences climate variability and precipitation over Amazonian rainforests, with an emphasis on plant physiological controls on deep convection triggering along a geographical water stress gradient. Using a new tool of sun-induced chlorophyll fluorescence (SIF), our study integrates plant physiological observations and climate modeling and aims to decrease the gap between field ecology and climate modeling. We have installed sensors at Manaus site (K34) and at Rebio Jaru (Ji-Paraná, Rondonia). From field observations, we found a diversity of hydraulic functioning, indicating that within the same forest we will find different responses to the predicted climatic changes. The hydraulic strategies varied through a continuum of hydraulic security and water transport efficiency, which can be related to a long process of taxa evolution. The fact that taller trees are more hydraulically vulnerable indicates that if these forests go through higher drought conditions and temperature increase, they could experience a massive tree mortality that will promote changes on forest structure, changing the ecosystem functions, such as water fluxes and carbon storage. To investigate the role of water stress on the onset of the rainy season, we have developed high-resolution cloud resolving model (CRM) simulations using a new strategy coupling convective and large-scales. The first results show that the presence of early morning fog reduces the wet season transpiration and carbon uptake over the everwet regions of Amazonia. We have incorporated SIF into CLM to constrain energy, carbon and water flux of tropical forests. By using CloudSat-observed cloud vertical structure, we show an empirical relationship between atmospheric energetics and convective clouds in Amazonia, in comparison with the savanna/shrubland and tropical West Pacific, emphasizing predominant deep convection during the early wet season when Bowen ratio and convective available potential energy (CAPE) increase. Although on average the deep convections are prominent only during the short dry-to-wet transition while shallow/congestus clouds dominate the rest of the year in Amazonia, there is a clear cloud regime shift when CAPE grows beyond a threshold value. Our project helped initiate and maintain collaboration between US and Brazilian scientists. We have been collaborating through yearly field campaigns, weekly international research meetings, and ongoing other collaborative projects. Through these activities, we helped our students and postdocs fill their knowledge gaps and learn new research techniques.

54 ENVIRONMENTAL SCIENCES↗

Chemical clocks: using otolith geochemistry to enhance estimation of age and growth of white hake (Urophycis tenuis)

The white hake (Urophycis tenuis) is a groundfish distributed throughout the Gulf of Maine. Catch advice is based on stock assessments done with age-based population dynamics models; however, otolith aging is challenging because of unclear growth increments. To address this concern, we compared the consistency of aging with counts of visual annuli to that of aging with cycles of elemental concentrations measured by using laser ablation inductively coupled plasma mass spectrometry. We tested the hypothesis that oscillations in both environmental conditions and internal physiology through time influence uptake of elements during otolith mineralization. Concentrations of manganese, in comparison with those of the other investigated trace elements (magnesium, strontium, and barium), had the most promising correlation with visual growth increments (~100% age agreement, ±1 year), offering an additional tool to enhance increment identification. In our examination of 550 otoliths collected during 2007–2021, we found that white hake lived a maximum of 10.3 years and exhibited sexual dimorphism in maximum length and age. By using generated von Bertalanffy growth functions, L(t)=110(1–e–0.113(t+0.45)) for males and L(t)=140(1–e–0.113(t–0.30)) for females (where L(t) is length at time t), size and age at maturity were calculated for males (37.4 cm in total length (TL), 3.3 years) and females (47.4 cm TL, 4.2 years). These results demonstrate that otolith geochemistry can be used to improve the accuracy and precision of the estimation of fish age and maturity, even for challenging species.

59 BASIC BIOLOGICAL SCIENCES↗

HEPOM: Using Graph Neural Networks for the Accelerated Predictions of Hydrolysis Free Energies in Different pH Conditions

Hydrolysis is a fundamental family of chemical reactions where water facilitates the cleavage of bonds. The process is ubiquitous in biological and chemical systems, owing to water’s remarkable versatility as a solvent. However, accurately predicting the feasibility of hydrolysis through computational techniques is a difficult task, as subtle changes in reactant structure like heteroatom substitutions or neighboring functional groups can influence the reaction outcome. Furthermore, hydrolysis is sensitive to the pH of the aqueous medium, and the same reaction can have different reaction properties at different pH conditions. In this work, we have combined reaction templates and high-throughput ab initio calculations to construct a diverse data set of hydrolysis free energies. The developed framework automatically identifies reaction centers, generates hydrolysis products, and utilizes a trained graph neural network (GNN) model to predict ΔG values for all potential hydrolysis reactions in a given molecule. The long-term goal of the work is to develop a data-driven, computational tool for high-throughput screening of pH-specific hydrolytic stability and the rapid prediction of reaction products, which can then be applied in a wide array of applications including chemical recycling of polymers and ion-conducting membranes for clean energy generation and storage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Methods to Register Models and Input/Output Parameters for Integrated Modeling

Significant resources can be required when constructing integrated modeling systems. In a typical application, components (e.g., models and databases) created by different developers are assimilated, requiring the framework’s functionality to bridge the gap between the user’s knowledge of the components being linked. The framework, therefore, needs the capability to assimilate a wide range of model-specific input/output requirements as well as their associated assumptions and constraints. The process of assimilating such disparate components into an integrated modeling framework varies in complexity and difficulty. Several factors influence the relative ease of assimilating components, including, but not limited to, familiarity with the components being assimilated, familiarity with the framework and its tools that support the assimilation process, level of documentation associated with the components and the framework, and design structure of the components and framework. This initial effort reviews different approaches for assimilating models and their model-specific input/output requirements: 1) modifying component models to directly communicate with the framework (i.e., through an Application Programming Interface), 2) developing model-specific external wrappers such that no component model modifications are required, 3) using parsing tools to visually map pre-existing input/output files, and 4) describing and linking models as dynamic link libraries. Most of these approaches are illustrated using the widely distributed modeling system called Framework for Risk Analysis in Multimedia Environmental Systems (FRAMES). The review concludes that each has its strengths and weakness, the factors that determine which approaches work best in a given application.

Data Transfer↗