Search NASA⌕ Search

SEARCH · Search NASA

Results for “topographic map”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1996

First Results of the TOPSAR C-Band/L-Band Interferometer: Calibration and Differential Penetration

The NASA/JPL TOPSAR instrument recently was extended from a single- wavelength C-band (5.6 cm-lambda) dual aperture synthetic aperture radar interferometer to include a second wavelength at L-band (24 cm). Adding the second wavelength invites comparison of wavelength-diverse effects in topographic mapping of surfaces, with the principal goal of understanding the penetration of the radar signals in vegetation canopies, and determining the inferred topographic height. A first analysis of these data was conducted at two sites. Elkhorn Slough near Monterey, California presented flat, vegetation free terrain required for calibrating the radar interferometric parameters. A second site stretching from San Jose to Santa Cruz, CA, which is heavily vegetated, provided the first test case for wavelength diverse penetration studies. Preliminary results show that: (a) the interferometer calibration determined at Elkhorn Slough is extendable to Laurel Quad and gives confidence in the C- and L-band height measurements; and (b) Clear differences are observed between the C- and L-band heights associated with vegetation, with C-band-derived topographic heights generally higher than those from L-band. The noise level in the L-band interferometer is presently the limiting factor in penetration studies.

Rosen, Paul A.↗
NASA NTRS1980

Korean coastal water depth/sediment and land cover mapping /1:25,000/ by computer analysis of Landsat imagery

Computer analysis was applied to single data Landsat MSS imagery of a coastal area near Seoul, Korea equivalent to a 1:50,000 topographic map, and featuring large dynamic sediment transport processes. Supervised image processing yielded a test classification map containing five water depth/sediment classes, two shoreline/tidal classes and five coastal land cover classes at a scale of 1:25,000 and with a training set accuracy of 76%; the training sets were selected by direct examination of the digitally displayed imagery. The unsupervised ISOCLAS (Senkus, 1976) clustering analysis was performed to assess the relative value of this approach to image classification in areas of sparse or nonexistent ground control. Results indicate that it is feasible to produce quantitative maps for detailed study of dynamic coastal processes given a Landsat image data base at sufficiently frequent time intervals.

Park, K. Y.↗
NASA NTRS1978

Korean coastal water depth/sediment and land cover mapping (1:25,000) by computer analysis of LANDSAT imagery

Computer analysis was applied to single date LANDSAT MSS imagery of a sample coastal area near Seoul, Korea equivalent to a 1:50,000 topographic map. Supervised image processing yielded a test classification map from this sample image containing 12 classes: 5 water depth/sediment classes, 2 shoreline/tidal classes, and 5 coastal land cover classes at a scale of 1:25,000 and with a training set accuracy of 76%. Unsupervised image classification was applied to a subportion of the site analyzed and produced classification maps comparable in results in a spatial sense. The results of this test indicated that it is feasible to produce such quantitative maps for detailed study of dynamic coastal processes given a LANDSAT image data base at sufficiently frequent time intervals.

Park, K. Y.↗
NASA NTRS1981

Computer generated maps from digital satellite data - A case study in Florida

Ground cover maps are important tools to a wide array of users. Over the past three decades, much progress has been made in supplementing planimetric and topographic maps with ground cover details obtained from aerial photographs. The present investigation evaluates the feasibility of using computer maps of ground cover from satellite input tapes. Attention is given to the selection of test sites, a satellite data processing system, a multispectral image analyzer, general purpose computer-generated maps, the preliminary evaluation of computer maps, a test for areal correspondence, the preparation of overlays and acreage estimation of land cover types on the Landsat computer maps. There is every indication to suggest that digital multispectral image processing systems based on Landsat input data will play an increasingly important role in pattern recognition and mapping land cover in the years to come.

Arvanitis, L. G.↗
NASA NTRS1994

The Clementine mission: Initial results from lunar mapping

Clementine was a mission designed to test the space worthiness of a variety of advanced sensors for use on military surveillance satellites while, at the same time, gathering useful scientific information on the composition and structure of the Moon and a near Earth asteroid. Clementine was dispatched for an extended stay in the vicinity of Earth's Moon on 25 Jan. 1994 and arrived at the Moon on 20 Feb. 1994. The spacecraft started systematic mapping on 26 Feb., completed mapping on 22 Apr., and left lunar orbit on 3 May. The entire Clementine project, from conception through end of mission, lasted approximately three years. Topographic profiles derived from lidar laser altimetry permitted construction of a global topographic map of the Moon. Clementine also aimed at mapping the color of the Moon in eleven different wavelengths in the visible and near infrared parts of the system. With rock and soil samples of known geological context available from the Apollo and Lunar programs, the Clementine mission offers the data needed to construct a global digital image model of the Moon.

Spudis, P. D.↗
NASA NTRS1979

New determinations of far-side lunar radii from Apollo photography

Determinations of far side lunar radii based on the reduction of photogrammetric measurements derived from Apollo 16 photographs obtained during the trans-earth phase of the spacecraft trajectory are presented. Reduction is accomplished by determining the Apollo 16 metric camera orientation relative to control points on the lunar surface whose coordinates are known exactly, than charting the surface on the basis of data coverage. The positions of 66 surface features in the area between longitudes 90 and 130 deg E and 10 and 60 deg N relative to the center of mass of the moon, with a relative accuracy of 500 km, are presented. A topographical map which can resolve basin-sized features has been derived from radius determinations. It is found that the craters Fabry, Riemann and Szilard comprise a topographically depressed region about 500 km in diameter with a floor 2.4 to 3.4 km below the 1730.0 km reference sphere and 4.8 to 5.8 km below the northern rim of the unfilled basin.

Mohan, S. N.↗
NASA NTRS1980

Applications of HCMM satellite data

Underflight data were radiometrically calibrated at several locations and surface water temperature measurements were made for several areas approximating the field of view of the HCMM sensor in a study of the thermal properties of Lake Ontario and Lake Erie and of the heat island problem in selected areas adjacent to these lakes. The temperatures obtained from the radiometrically collected imagery were then plotted against the apparent temperatures for these same locations obtained from HCMM computer compatible tapes. The sensor calibration provides a foundation for development of a refined model for radiometric correction of HCMM data to produce maps of thermal bar development in Lake Ontario. Thermal patterns of several urban areas were generated from HCMM tapes and scaled to corresponding land use and topographic maps. The resulting map overlays are being interpreted in terms of land use influence on the extend and severity of heat island indicators.

Source record↗
NASA NTRS2011

Multiple-Zone Diffractive Optic Element for Laser Ranging Applications

A diffractive optic element (DOE) can be used as a beam splitter to generate multiple laser beams from a single input laser beam. This technology has been recently used in LRO s Lunar Orbiter Laser Altimeter (LOLA) instrument to generate five laser beams that measure the lunar topography from a 50-km nominal mapping orbit (see figure). An extension of this approach is to use a multiple-zone DOE to allow a laser altimeter instrument to operate over a wider range of distances. In particular, a multiple-zone DOE could be used for applications that require both mapping and landing on a planetary body. In this case, the laser altimeter operating range would need to extend from several hundred kilometers down to a few meters. The innovator was recently involved in an investigation how to modify the LOLA instrument for the OSIRIS asteroid mapping and sample return mission. One approach is to replace the DOE in the LOLA laser beam expander assembly with a multiple-zone DOE that would allow for the simultaneous illumination of the asteroid with mapping and landing laser beams. The proposed OSIRIS multiple-zone DOE would generate the same LOLA five-beam output pattern for high-altitude topographic mapping, but would simultaneously generate a wide divergence angle beam using a small portion of the total laser energy for the approach and landing portion of the mission. Only a few percent of the total laser energy is required for approach and landing operations as the return signal increases as the inverse square of the ranging height. A wide divergence beam could be implemented by making the center of the DOE a diffractive or refractive negative lens. The beam energy and beam divergence characteristics of a multiple-zone DOE could be easily tailored to meet the requirements of other missions that require laser ranging data. Current single-zone DOE lithographic manufacturing techniques could also be used to fabricate a multiple-zone DOE by masking the different DOE zones during the manufacturing process, and the same space-compatible DOE substrates (fused silica, sapphire) that are used on standard DOE s could be used for multiple- zone DOE s. DOEs are an elegant and cost-effective optical design option for spacebased laser altimeters that require multiple output laser beams. The use of multiple-zone DOEs would allow for the design and optimization of a laser altimeter instrument required to operate over a large range of target distances, such as those designed to both map and land on a planetary body. In addition to space-based laser altimeters, this technology could find applications in military or commercial unmanned aerial vehicles (UAVs) that fly at an altitude of several kilometers and need to land. It is also conceivable that variations of this approach could be used in land-based applications such as collision avoidance and robotic control of cars, trains, and ships.

Ramos-Izquierdo, Luis A.↗
NASA NTRS1975

Geomorphic interpretation of Skylab photography collected over the Nevada portion of the Great Basin

Skylab S190B black and white photography has a useful reconnaissance capability in geomorphic mapping of landform features in the arid and semi-arid Great Basin. Enlargement of original photographic data products to a scale of 1:250,000 scale compatible with published topographic maps permits ready identification and classification of most landform elements. However, interpretation suffers through the lack of stereoscopic coverage and introduces problems relating to scale and loss of detail. When aircraft underflight photography for the same area is used as a data enhancement tool, problems of scale, detail, and interpretation are diminished. The combination of orbital and underflight photographic coverage provides a regional overview in which the interrelationships of both micro- and macro-scale landforms become apparent.

Frater, J. B.↗
NASA NTRS1977

Multidate mapping of mosquito habitat

LANDSAT data from three overpasses formed the data base for a multidate classification of 15 ground cover categories in the margins of Lewis and Clark Lake, a fresh water impoundment between South Dakota and Nebraska. When scaled to match topographic maps of the area, the ground cover classification maps were used as a general indicator of potential mosquito-breeding habitat by distinguishing productive wetlands areas from nonproductive nonwetlands areas. The 12 channel multidate classification was found to have an accuracy 23% higher than the average of the three single date 4 channel classifications.

Woodzick, T. L.↗
NASA NTRS1991

CD-ROM publication of the Mars digital cartographic data base

The recently completed Mars mosaicked digital image model (MDIM) and the soon-to-be-completed Mars digital terrain model (DTM) are being transcribed to optical disks to simplify distribution to planetary investigators. These models, completed in FY 1991, provide a cartographic base to which all existing Mars data can be registered. The digital image map of Mars is a cartographic extension of a set of compact disk read-only memory (CD-ROM) volumes containing individual Viking Orbiter images now being released. The data in these volumes are pristine in the sense that they were processed only to the extent required to view them as images. They contain the artifacts and the radiometric, geometric, and photometric characteristics of the raw data transmitted by the spacecraft. This new set of volumes, on the other hand, contains cartographic compilations made by processing the raw images to reduce radiometric and geometric distortions and to form geodetically controlled MDIM's. It also contains digitized versions of an airbrushed map of Mars as well as a listing of all feature names approved by the International Astronomical Union. In addition, special geodetic and photogrammetric processing has been performed to derive rasters of topographic data, or DTM's. The latter have a format similar to that of MDIM, except that elevation values are used in the array instead of image brightness values. The set consists of seven volumes: (1) Vastitas Borealis Region of Mars; (2) Xanthe Terra of Mars; (3) Amazonis Planitia Region of Mars; (4) Elysium Planitia Region of Mars; (5) Arabia Terra of Mars; (6) Planum Australe Region of Mars; and (7) a digital topographic map of Mars.

Batson, R. M.↗
NASA NTRS1986

The effect of Thematic Mapper spectral properties on land cover mapping for hydrologic modeling

The accuracy of unsupervised land-cover classification from all seven Landsat TM bands and from six combinations of three or four bands is evaluated using images of the Clinton River Basin, a suburban watershed near Detroit. Data from aerial TMS photography, USGS topographic maps, and ground surveys are employed to determine the classification accuracy. The mapping accuracy of all seven bands is found to be significantly better (6 percent overall, 12 percent for residential areas, and 13 percent for commercial districts) than that with bands 2, 3, and 4; but almost the same accuracy is obtained by including at least one band from each major spectral region (visible, NIR, and mid-IR).

Gervin, J. C.↗
NASA NTRS2005

Generating Solid Models from Topographical Data

A method of generating solid models of terrain involves the conversion of topographical data into a form useable by a rapid-prototyping (RP) machine. The method was developed to enable the use of the RP machine to make solid models of Martian terrain from Mars Orbiter laser-altimeter topographical data. The method is equally applicable to the generation of models of the terrains of other astronomical bodies, including other planets, asteroids, and Earth. Topographical data describe a terrain in terms of a set of three-dimensional coordinates [e.g., Cartesian (x,y,z) or polar (latitude, longitude, radius) coordinates] of points or nodes on the terrain surface. The input data for the RP machines are required to provide a three-dimensional description, not of a single surface, but of a volume in this case, a ground volume that underlies the terrain surface. The description is required to be in the form of triangular elements that connect the nodes of all the surfaces and that completely bound the volume, with no open areas, no overlap of triangles, and no extraneous geometric elements. The software used in the present model-generation method was written in IDL - an advanced programming language that affords a number of tools, including subroutines that triangularize surfaces. The software creates a volume from the topographical surface data by adding sides to the edges of the terrain surface and joining the sides with a bottom surface. Each of the sides is triangularized by use of IDL subroutines, and then the software searches for extraneous elements and removes them. Topographical data are usually presented in a grid corresponding to polar coordinates, so that a model generated from such data is equivalent to a topographical map in Mercator projection. However an RP machine is fully capable of including the curvature of a planetary body in a model that it makes. Therefore, the software also offers a capability to transform the topographical data to a projection onto a surface having a curvature corresponding to that of the surface of the modeled planet.

Keller, John W.↗
NASA NTRS1975

Martian topography derived from occultation, radar, spectral, and optical measurements

A new global topographic map of the planet Mars, derived primarily from Mariner 9 data, is presented. Spacecraft radio signal occultation times, remote sensing of infrared and ultraviolet spectra, and earth-based radar measurements are included in the data base. Large-scale topographic relief is seen with definite fluid flow patterns established over much of the surface consistent with earlier analyses. An optical flattening of 0.0059 is obtained with a center-of-mass to center-of-figure offset of approximately 2 km to the south and 1 km toward the Tharsis ridge. Mathematical models approximating the topographic figure and 6.1-mb isobaric surface for Mars are included in this presentation.

Christensen, E. J.↗
NASA NTRS2007

Program Merges SAR Data on Terrain and Vegetation Heights

X/P Merge is a computer program that estimates ground-surface elevations and vegetation heights from multiple sets of data acquired by the GeoSAR instrument [a terrain-mapping synthetic-aperture radar (SAR) system that operates in the X and bands]. X/P Merge software combines data from X- and P-band digital elevation models, SAR backscatter magnitudes, and interferometric correlation magnitudes into a simplified set of output topographical maps of ground-surface elevation and tree height.

Siqueira, Paul↗
NASA NTRS1982

Verification of LANDSAT imagery for morphametric and topological studies of drainage basins in a section of the western plateau of Sao Paulo State: Tiete-Aguapei watershed

The potential of using LANDSAT MSS imagery for morphometric and topological studies of drainage basins was verified. Using Tiete and Aguapei watershed (Western Plateau) as the test site because of its homogeneous landscape. Morphometric variables collected for ten drainage basins include: circularity index; river density; drainage density; topographic texture; areal and index length; basin parameter; and main river length 1st order and 2nd order channel length. The topographical variables determined were: order; magnitude; bifuraction ratio; weighted bifuraction ratio; number of segments; number of linking; trajectory length; and topological diameter. Data were collected on topographical maps at the scale of 1:250,000 and 1:59,000 and on LANDSAT imagery at the scale of 1:250,000. The results which were summarized on tables for further analysis, show that LANDSAT imagery can supply the lack of topographic charts for drainage studies.

Parada, N. D. J.↗
NASA NTRS1985

The earth's surface studied from space; Proceedings of Workshop II of the COSPAR 25th Plenary Meeting, Graz, Austria, June 25-July 7, 1984

Consideration is given to: Landsat image data quality studies; a preliminary evaluation of Landsat-4 Thematic Mapper (TM) data for mineral exploration; and the early evaluation of TM data for mapping forest, agricultural and soil resources. Among other topics discussed are: shortwave infrared detection of vegetation; SPOT image quality and post-launch assessment; an evaluation of SPOT HRV simulation data for Corps of Engineers applications; and the application potential of SPOT imagery for topographic mapping. Consideration is also given to: verification studies of MOS-1 sensors; multiple sensor geocoded data; and the utility of proposed sensors for coastal engineering studies.

Ungar, S. G.↗