Search NASA⌕ Search

SEARCH · Search NASA

Results for “tracking data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

On the determination and investigation of the terrestrial ionospheric refractive indices using GEOS-3/ATS-6 satellite-to-satellite tracking data

When the radio link between two satellites (GEOS-3/ATS-6) is intercepted by the earth's ionosphere and neutral atmosphere, a change in the Doppler frequency results. Travel through the atmosphere causes the Doppler phase to be advanced in the ionosphere's portion and retarded in the neutral portion of the atmosphere. Analysis of the shortening and lengthening of the phase of the Satellite-to-Satellite Tracking (SST) data that passed within 40-700 km above the earth's surface during its ATS-6 to GEOS-3 to ATS-6 path, caused by the atmosphere, results in refractivity versus height profiles. The SST Doppler data were used directly to adjust the GEOS-3 orbit. Perturbation from the Moon, Sun and a 15th order/degree earth gravity field were included in the orbit solution. This orbit was continued through the occultation period and a model ionosphere was estimated by a least-square adjustment of the Chapman ionosphere parameters from the SST data residuals. The refractivity profile obtained by this model ionosphere was compared to a refractivity profile obtained by a direct integral inversion of the SST data residuals. Systematic differences between the 2 methods were caused by orbital errors, which propagated into the solution. The SST data yielded refractive index profiles in a novel economical manner because no additional or special on-board equipment were required.

Liu, A. S.↗

Utilization of satellite-satellite tracking data for determination of the geocentric gravitational constant (GM)

Range rate tracking of GEOS 3 through the ATS 6 satellite was used, along with ground tracking of GEOS 3, to estimate the geocentric gravitational constant (GM). Using multiple half day arcs, a GM of 398600.52 + or - 0.12 cu km/sq sec was estimated using the GEM 10 gravity model, based on speed of light of 299792.458 km/sec. Tracking station coordinates were simultaneously adjusted, leaving geopotential model error as the dominant error source. Baselines between the adjusted NASA laser sites show better than 15 cm agreement with multiple short arc GEOS 3 solutions.

Martin, C. F.↗

Tracking Data Acquisition System (TDAS) for the 1990's. Volume 6: TDAS navigation system architecture

One-way range and Doppler methods for providing user orbit and time determination are examined. Forward link beacon tracking, with on-board processing of independent navigation signals broadcast continuously by TDAS spacecraft; forward link scheduled tracking; with on-board processing of navigation data received during scheduled TDAS forward link service intervals; and return link scheduled tracking; with ground-based processing of user generated navigation data during scheduled TDAS return link service intervals are discussed. A system level definition and requirements assessment for each alternative, an evaluation of potential navigation performance and comparison with TDAS mission model requirements is included. TDAS satellite tracking is also addressed for two alternatives: BRTS and VLBI tracking.

Elrod, B. D.↗

Non-Negative Matrix Factorization of Partial Track Data for Motion

This paper addresses the problem of segmenting low level partial feature point tracks belonging to multiple motions. We show that the local velocity vectors at each instant of the trajectory are an effective basis for motion segmentation. We decompose the velocity profiles of point tracks into different motion components and corresponding nonnegative weights using non-negative matrix factorization (NNMF). We then segment the different motions using spectral clustering on the derived weights. We test our algorithm on the Hopkins 155 benchmarking database and several new sequences, demonstrating that the proposed algorithm can accurately segment multiple motions at a speed of a few seconds per frame. We show that our algorithm is particularly successful on low-level tracks from real-world video that are fragmented, noisy and inaccurate

Computer Vision↗

Venusian k(sub 2) Tidal Love Number from Magellan and PVO Tracking Data

The k(sub 2) potential ove number which scales the tidal deformation of Venus by the Sun has been estimated from Doppler tracking of Magellan and Pioneer Venus Orbiter (PVO) spacecraft data. The nominal range for k(sub 2) from theoretical models is 0.23(less than or equal to)k(sub 2)(less than or equal to)0.29 for a liquid iron core and about 0.17 if the iron core has solidified. Our best estimate of this parameter is k(sub 2) = 0.295 +/- 0.662 (2X formal {delta}) and supports the hypothesis that Venus core is solid.

orbiter pvo↗

Identification of pilot dynamics from in-flight tracking data

Data from a representative flight task involving an F-14 'pursuer' aircraft tracking a T-38 'target' aircraft in a 3G wind-up turn and in level flight are processed using a least squares identification technique in an attempt to identify pilot/vehicle dynamics. Comparative identification results are provided by a Fourier coefficient method which requires a carefully designed and implemented input consisting of a sum of sinusoids. The least-squares results compare favorably with those obtained by the Fourier technique. An example of crossover frequency regression is discussed in the light of the conditions of one of the flight configurations.

Hess, R. A.↗

GEOS-3 coherent C-band tracking data reduction and analysis

The availability of a coherent C-Band transponder on an orbiting vehicle has permitted the development of calibration techniques for C-Band radars. Prior coherent tracking was limited to test vehicles in powered flight or skin tracking of orbiting spacecraft. The pulse Doppler range rate data available concurrently and independently with normal range and angle data provides an extremely useful data set for assessing the internal consistency of the radars measurements, particularly when coupled with a trajectory well constrained by orbit dynamics. In order to further assess the precision of the range rate data, a technique was developed to numerically integrate the rate measurements into a pseudo-range data set showing extremely low noise and high sensitivity to systematic radar errors. Evaluation of integrated range data led to improvements in calibration of both the rate and conventional range data. In particular, proper evaluation of the very sensitive integrated ranges required the development of a processing correction for beacon delay variation with signal strength, a significant error in the conventional ranging data.

Krabill, W. B.↗

Mars Gravity Field Model Development from Mars Global Surveyor Tracking Data

Since Feb. 99 the MGS spacecraft has been in a near circular orbit at about 400 km altitude. The MGS has been regularly tracked by the Deep Space Network (DSN) at X-band and for a 3 week period in February was tracked almost continuously for an intensive gravity modeling activity that would form the basis of the orbital computations for the rest of the mission. The data collected during this calibration period and the earlier SPO and Hiatus periods have now been used to develop a new gravity field model for Mars that is showing considerable new detail in both the northern and southern hemispheres. Until February no data at 400 km altitude or lower had been acquired on any previous mission south of about 35S and all the previous data were of significantly lower quality. Low altitude data (-170 km) were obtained over the higher latitudes of the northern hemisphere during the SPO periods but because of the high eccentricity of the orbit nothing of similar quality was obtainable for the southern hemisphere. The new models are of spherical harmonic degree and order 70 or higher and are suggesting large anomalies are often associated with the large impact features. Gravity data have also been obtained over both the northern and southern polar ice caps. The MGS orbit quality resulting from the use of these newer models is better than any previous Mars missions and is approaching the ten's of meter level that had been hoped would be eventually realizable.

Lemoine, F. G.↗

Geoid Recovery Using Geophysical Inverse Theory Applied to Satellite to Satellite Tracking Data

This report describes a new method for determination of the geopotential, or the equivalent geoid. It is based on Satellite-to-Satellite Tracking (SST) of two co-orbiting low earth satellites separated by a few hundred kilometers. The analysis is aimed at the GRACE Mission, though it is generally applicable to any SST data. It is proposed that the SST be viewed as a mapping mission. That is, the result will be maps of the geoid or gravity, as contrasted with determination of spherical harmonics or Fourier coefficients. A method has been developed, based on Geophysical Inverse Theory (GIT), that can provide maps at a prescribed (desired) resolution and the corresponding error map from the SST data. This computation can be done area by area avoiding simultaneous recovery of all the geopotential information. The necessary elements of potential theory, celestial mechanics, and Geophysical Inverse Theory are described, a computation architecture is described, and the results of several simulations presented. Centimeter accuracy geoids with 50 to 100 km resolution can be recovered with a 30 to 60 day mission.

Gaposchkin, E. M.↗

Determination of the geopotential from satellite-to-satellite tracking data

Ground-based observation of the deviation of artificial satellite trajectories from a reference path is the classical means for determining the parameters of the global geopotential. However, for the short wavelengths (less than 10 deg), tracking coverage from ground stations of sufficient density is impossible to obtain. But one or more satellites can observe another satellite and obtain the needed global data coverage. Results are presented of error analyses of possible satellite-to-satellite tracking missions to determine the geopotential at a resolution of 1 x 1 deg. To achieve an accuracy of a few milligals at this resolution requires a satellite altitude at or near 150 km and measurements of intersatellite speed to 10 to the -6th m/s.

Douglas, B. C.↗

Geoid Recovery using Geophysical Inverse Theory Applied to Satellite to Satellite Tracking Data

This report describes a new method for determination of the geopotential. The analysis is aimed at the GRACE mission. This Satellite-to-Satellite Tracking (SST) mission is viewed as a mapping mission The result will be maps of the geoid. The elements of potential theory, celestial mechanics, and Geophysical Inverse Theory are integrated into a computation architecture, and the results of several simulations presented Centimeter accuracy geoids with 50 to 100 km resolution can be recovered with a 30 to 60 day mission.

Gaposchkin, E. M.↗

Differential tracking data types for accurate and efficient Mars planetary navigation

Ways in which high-accuracy differential observations of two or more deep space vehicles can dramatically extend the power of earth-based tracking over conventional range and Doppler tracking are discussed. Two techniques - spacecraft-spacecraft differential very long baseline interferometry (S/C-S/C Delta(VLBI)) and same-beam interferometry (SBI) - are discussed. The tracking and navigation capabilities of conventional range, Doppler, and quasar-relative Delta(VLBI) are reviewed, and the S/C-S/C Delta (VLBI) and SBI types are introduced. For each data type, the formation of the observable is discussed, an error budget describing how physical error sources manifest themselves in the observable is presented, and potential applications of the technique for Space Exploration Initiative scenarios are examined. Requirements for spacecraft and ground systems needed to enable and optimize these types of observations are discussed.

Edwards, C. D., Jr.↗

Width Criterion For Weld-Seam-Tracking Data

Image-processing algorithm in "through-torch-vision" (T3V) system developed to guide gas/tungsten arc welding robot along weld seam modified, according to proposal, reducing incidence of inaccurate tracking of weld seam. Developmental system intended to provide closed-loop control of motion of welding robot along weld seam on basis of lines in T3V image identified by use of image-processing algorithm and assumed to coincide with edges of weld seam. Use of width criterion prevents tracking of many false pairs of lines, with consequent decrease in incidence of inaccurate tracking and increase in confidence in weld-tracking capability of robotic welding system.

Lincir, Mark R.↗

Limitations on the Use of Eye-Tracking Data to Understand Operator Awareness

Safety events in commercial aviation have implicated failures of attention and awareness, and the need for improved attention and awareness has pushed trainers toward eye-tracking systems as a primary tool for evaluating monitoring performance. Further, in the last 15 years, eye-tracking technology has become easier to acquire and use in operationally realistic settings. Although we believe that eye-tracking can be a useful evaluation tool, this paper describes basic limitations on relying on eye-tracking as the sole means for evaluating attention and awareness. A set of other measures are offered that can better identify where performance breakdowns occur.

aviation↗

Summary of along-track data from the Earth radiation budget satellite for several major desert regions

For several days in January and August 1985, the Earth Radiation Budget Satellite, a component of the Earth Radiation Budget Experiment (ERBE), was operated in an along-track scanning mode. A survey of radiance measurements is given for four desert areas in Africa, the Arabian Peninsula, Australia, and the Sahel region of Africa. Each overflight provides radiance information for four scene categories: clear, partly cloudy, mostly cloudy, and overcast. The data presented include the variation of radiance in each scene classification as a function of viewing zenith angle during each overflight of the five target areas. Several features of interest in the development of anisotropic models are evident, including day-night differences in longwave limb darkening and the azimuthal dependence of short wave radiance. There is some evidence that surface features may introduce thermal or visible shadowing that is not incorporated in the usual descriptions of the anisotropic behavior of radiance as viewed from space. The data also demonstrate that the ERBE scene classification algorithms give results that, at least for desert surfaces, are a function of viewing geometry.

Brooks, David R.↗