Search NASA⌕ Search

SEARCH · Search NASA

Results for “transit method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Accurate potential energy, dipole moment curves, and lifetimes of vibrational states of heteronuclear alkali dimers

We calculate the potential energy curves, the permanent dipole moment curves, and the lifetimes of the ground and excited vibrational states of the heteronuclear alkali dimers XY (X, Y = Li, Na, K, Rb, Cs) in the X{sup 1}Σ{sup +} electronic state using the coupled cluster with singles doubles and triples method. All-electron quadruple-ζ basis sets with additional core functions are used for Li and Na, and small-core relativistic effective core potentials with quadruple-ζ quality basis sets are used for K, Rb, and Cs. The inclusion of the coupled cluster non-perturbative triple excitations is shown to be crucial for obtaining the accurate potential energy curves. A large one-electron basis set with additional core functions is needed for the accurate prediction of permanent dipole moments. The dissociation energies are overestimated by only 14 cm{sup −1} for LiNa and by no more than 114 cm{sup −1} for the other molecules. The discrepancies between the experimental and calculated harmonic vibrational frequencies are less than 1.7 cm{sup −1}, and the discrepancies for the anharmonic correction are less than 0.1 cm{sup −1}. We show that correlation between atomic electronegativity differences and permanent dipole moment of heteronuclear alkali dimers is not perfect. To obtain the vibrational energies and wave functions the vibrational Schrödinger equation is solved with the B-spline basis set method. The transition dipole moments between all vibrational states, the Einstein coefficients, and the lifetimes of the vibrational states are calculated. We analyze the decay rates of the vibrational states in terms of spontaneous emission, and stimulated emission and absorption induced by black body radiation. In all studied heteronuclear alkali dimers the ground vibrational states have much longer lifetimes than any excited states.

74 ATOMIC AND MOLECULAR PHYSICS↗

In-situ crystallization of GeTe\GaSb phase change memory stacked films

Single and double layer phase change memory structures based on GeTe and GaSb thin films were deposited by pulsed laser deposition (PLD). Their crystallization behavior was studied using in-situ synchrotron techniques. Electrical resistance vs. temperature investigations, using the four points probe method, showed transition temperatures of 138 °C and 198 °C for GeTe and GaSb single films, respectively. It was found that after GeTe crystallization in the stacked films, Ga atoms from the GaSb layer diffused in the vacancies of the GeTe crystalline structure. Therefore, the crystallization temperature of the Sb-rich GaSb layer is decreased by more than 30 °C. Furthermore, at 210 °C, the antimony excess from GaSb films crystallizes as a secondary phase. At higher annealing temperatures, the crystalline Sb phase increased on the expense of GaSb crystalline phase which was reduced. Extended X-ray absorption fine structure (EXAFS) measurements at the Ga and Ge K-edges revealed changes in their local atomic environments as a function of the annealing temperature. Simulations unveil a tetrahedral configuration in the amorphous state and octahedral configuration in the crystalline state for Ge atoms, while Ga is four-fold coordinated in both as-deposited and annealed samples.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The island coalescence problem: Scaling of reconnection in extended fluid models including higher-order moments

As modeling of collisionless magnetic reconnection in most space plasmas with realistic parameters is beyond the capability of today's simulations, due to the separation between global and kinetic length scales, it is important to establish scaling relations in model problems so as to extrapolate to realistic scales. Recently, large scale particle-in-cell simulations of island coalescence have shown that the time averaged reconnection rate decreases with system size, while fluid systems at such large scales in the Hall regime have not been studied. Here, we perform the complementary resistive magnetohydrodynamic (MHD), Hall MHD, and two fluid simulations using a ten-moment model with the same geometry. In contrast to the standard Harris sheet reconnection problem, Hall MHD is insufficient to capture the physics of the reconnection region. Additionally, motivated by the results of a recent set of hybrid simulations which show the importance of ion kinetics in this geometry, we evaluate the efficacy of the ten-moment model in reproducing such results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Review on dielectric properties of rare earth doped barium titanate

Rare earth doped Barium Titanate (BaTiO{sub 3}) were studied due to high permittivity, excellent electrical properties and have wide usage in various applications. This paper reviewed on the electrical properties of RE doped BaTiO{sub 3} (RE: Lanthanum (La), Erbium (Er), Samarium (Sm), Neodymium (Nd), Cerium (Ce)), processing method, phase transition occurred and solid solution range for complete study. Most of the RE doped BaTiO{sub 3} downshifted the Curie temperature (T{sub C}). Transition temperature also known as Curie temperature, T{sub C} where the ceramics had a transition from ferroelectric to a paraelectric phase. In this review, the dielectric constant of La-doped BaTiO{sub 3}, Er-doped BaTiO{sub 3}, Sm-doped BaTiO{sub 3}, Nd-doped BaTiO{sub 3} and Ce-doped BaTiO{sub 3} had been proved to increase and the transition temperature or also known as T{sub C} also lowered down to room temperature as for all the RE doped BaTiO{sub 3} except for Er-doped BaTiO{sub 3}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermocouple-tip-exposing temperature assessment technique for evaluating photothermal conversion efficiency of plasmonic nanoparticles at low laser power density

A new thermocouple (TC) tip-exposing temperature assessment technique that combines experimental temperature measurements with a numerical model of the photothermal conversion efficiency η is presented. The proposed technique is designed to evaluate η for a gold-coated superparamagnetic iron oxide nanoparticle (SPIO-Au NP) solution (26 nm, 12–70 ppm) at low continuous wave laser power (103 mW, 532 nm) irradiation in a convenient manner under ambient conditions. The TC tip temperature is measured during the first 30 s of the laser exposure, and the results are combined with a finite element model to simulate the temperature rise of the NP solution for a given concentration. The value of η is adjusted in the model until the model agrees with the measured transient TC temperature rise. Values of η = 1.00 were observed for all concentrations. Theoretical predictions of η derived by Mie theory confirmed the near unity conversion efficiency of the as-synthesized SPIO-Au NPs. Advantages of the current technique include co-locating the TC tip in the geometric center of the laser-heated region, rather than outside of this region. In addition, the technique can be done under ambient room conditions using unmodified commercially available hardware.

Numerical methods↗

Combined elemental and microstructural analysis of genuine and fake copper-alloy coins

Innovative noninvasive material analysis techniques are applied to determine archaeometallurgical characteristics of copper-alloy coins from Florence's National Museum of Archaeology. Three supposedly authentic Roman coins and three hypothetically fraudolent imitations are thoroughly investigated using laser-induced plasma spectroscopy and time of flight neutron diffraction along with 3D videomicroscopy and electron microscopy. Material analyses are aimed at collecting data allowing for objective discrimination between genuine Roman productions and late fakes. The results show the mentioned techniques provide quantitative compositional and textural data, which are strictly related to the manufacturing processes and aging of copper alloys. (laser applications)

36 MATERIALS SCIENCE↗

Atomic-scale Modeling of Interactions of Helium, Vacancies and Helium-vacancy Clusters with Screw Dislocations in Alpha-Iron

The interactions of He and vacancy defects with <111> screw dislocations in alpha-Fe are modeled using molecular statics, molecular dynamics and transition state energy determinations. The formation energies and binding energies of interstitial He atoms, vacancies and He-vacancy clusters near and within dislocations in alpha-Fe are determined at various locations relative to the dislocation core. Using the dimer transition state method the migration energies and trajectories of the He and vacancy defects near and within the screw dislocation are also determined. Both interstitial He atoms and single vacancies are attracted to and trapped in the dislocation core region, and they both migrate along the dislocation line with a migration energy of about 0.4 eV, which is about half the migration energy of vacancies in the perfect crystal and about five times the migration energy for interstitial He in the perfect crystal. Divacancies and He-divacancy complexes have migration properties within the dislocation core that are similar to those in the perfect crystal, although the stability of these defects within the dislocation may be somewhat less than in the perfect crystal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

HABITABILITY OF EXOMOONS AT THE HILL OR TIDAL LOCKING RADIUS

Moons orbiting extrasolar planets are the next class of object to be observed and characterized for possible habitability. Like the host-planets to their host-star, exomoons have a limiting radius at which they may be gravitationally bound, or the Hill radius. In addition, they also have a distance at which they will become tidally locked and therefore in synchronous rotation with the planet. We have examined the flux phase profile of a simulated, hypothetical moon orbiting at a distant radius around the confirmed exoplanets {mu} Ara b, HD 28185 b, BD +14 4559 b, and HD 73534 b. The irradiated flux on a moon at its furthest, stable distance from the planet achieves its largest flux gradient, which places a limit on the flux ranges expected for subsequent (observed) moons closer in orbit to the planet. We have also analyzed the effect of planetary eccentricity on the flux on the moon, examining planets that traverse the habitable zone either fully or partially during their orbit. Looking solely at the stellar contributions, we find that moons around planets that are totally within the habitable zone experience thermal equilibrium temperatures above the runaway greenhouse limit, requiring a small heat redistribution efficiency. In contrast, exomoons orbiting planets that only spend a fraction of their time within the habitable zone require a heat redistribution efficiency near 100% in order to achieve temperatures suitable for habitability. This means that a planet does not need to spend its entire orbit within the habitable zone in order for the exomoon to be habitable. Because the applied systems comprise giant planets around bright stars, we believe that the transit detection method is most likely to yield an exomoon discovery.

79 ASTRONOMY AND ASTROPHYSICS↗

A COMPREHENSIVE CHARACTERIZATION OF THE 70 VIRGINIS PLANETARY SYSTEM

An on-going effort in the characterization of exoplanetary systems is the accurate determination of host star properties. This effort extends to the relatively bright host stars of planets discovered with the radial velocity method. The Transit Ephemeris Refinement and Monitoring Survey (TERMS) is aiding in these efforts as part of its observational campaign for exoplanet host stars. One of the first known systems is that of 70 Virginis, which harbors a jovian planet in an eccentric orbit. Here we present a complete characterization of this system with a compilation of TERMS photometry, spectroscopy, and interferometry. We provide fundamental properties of the host star through direct interferometric measurements of the radius (1.5% uncertainty) and through spectroscopic analysis. We combined 59 new Keck HIRES radial velocity measurements with the 169 previously published from the ELODIE, Hamilton, and HIRES spectrographs, to calculate a refined orbital solution and construct a transit ephemeris for the planet. These newly determined system characteristics are used to describe the Habitable Zone of the system with a discussion of possible additional planets and related stability simulations. Finally, we present 19 years of precision robotic photometry that constrain stellar activity and rule out central planetary transits for a Jupiter-radius planet at the 5σ level, with reduced significance down to an impact parameter of b = 0.95.

79 ASTRONOMY AND ASTROPHYSICS↗

Nonadiabatic couplings from the Kohn-Sham derivative matrix: Formulation by time-dependent density-functional theory and evaluation in the pseudopotential framework

We study the time-dependent density-functional theory formulation of nonadiabatic couplings (NAC's) to settle problems regarding practical calculations. NAC's have so far been rigorously formulated on the basis of the density response scheme and expressed using the nuclear derivative of the Hamiltonian, {partial_derivative}H/{partial_derivative}R, whereby causing the pseudopotential problem. When rewritten using the nuclear derivative operator, {partial_derivative}/{partial_derivative}R, or the d operator, the formula is found free of the problem and thus provides a working numerical scheme. The d-operator-based formulation also allows us to lay a foundation on the empirical Slater transition-state method and to show an improved way of using the auxiliary excited-state wave-function ansatz, both of which have been utilized in previous works. Evaluation of NAC near either the Jahn-Teller or the Renner-Teller intersection in various molecular systems shows that the values of NAC are much improved over previous calculations when the d-operator formula is implemented in the pseudopotential framework.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Charging of insulators by multiply-charged-ion impact probed by slowing down of fast binary-encounter electrons

The interaction of ion beams with insulators leads to charging-up phenomena, which at present are under investigation in connection with guiding phenomena in nanocapillaries with possible application in nanofocused beams. We studied the charging dynamics of insulating foil targets [Mylar, polypropylene (PP)] irradiated with swift ion beams (C, O, Ag, and Xe at 40, 23, 40, and 30 MeV/u, respectively) via the measurement of the slowing down of fast binary-encounter electrons. Also, sandwich targets (Mylar covered with a thin Au layer on both surfaces) and Mylar with Au on only one surface were used. Fast-electron spectra were measured by the time-of-flight method at the superconducting cyclotron of Laboratori Nazionali del Sud (LNS) Catania. The charge buildup leads to target-material-dependent potentials of the order of 6.0 kV for Mylar and 2.8 kV for PP. The sandwich targets, surprisingly, show the same behavior as the insulating targets, whereas a single Au layer on the electron and ion exit side strongly suppresses the charging phenomenon. The accumulated number of projectiles needed for charging up is inversely proportional to electronic energy loss. Thus, the charging up is directly related to emission of secondary electrons.

74 ATOMIC AND MOLECULAR PHYSICS↗

Energy loss of keV fluorine ions scattered off a missing-row reconstructed Au(110) surface under grazing incidence

A joint experimental and theoretical study of energy loss is presented for 1-to-4-keV fluorine negative ions in grazing scattering on a missing-row reconstructed Au(110) surface. Measurements of energy losses for various azimuthal orientations of the crystal have been performed by means of a time-of-flight method with a pulsed beam. The dependence of the fraction of surviving negative ions on azimuthal angles, was determined. Our energy-loss data are discussed in light of trajectory and stopping-power calculations, where the explicit inclusion of the nonuniform electron density at the surface provides good agreement with the experimental data. The simulation allows us to delineate various trajectory classes that correspond to different contributions in the energy-loss spectra for various azimuthal orientations of the surface.

74 ATOMIC AND MOLECULAR PHYSICS↗

Density functional methods for the magnetism of transition metals: SCAN in relation to other functionals

We report tests of various density functionals for ferromagnetic Fe, Co, and Ni with a focus on characterizing the behavior of the so-called strongly constrained and appropriately normed (SCAN) functional. It is found that SCAN is closer in behavior to functionals that yield localized behavior, such as hybrid functionals, than other semilocal functionals that are tested. The results are understood in terms of a tendency to differentiate orbitals, favoring integer occupation, which is necessary for a correct description of atomic systems, but inappropriate for the open shell metallic ferromagnetic metals studied here. Not only is the exchange splitting for open shells enhanced with SCAN, but also as seen in Ni, there is much more band dependence with significantly more overestimation for bands corresponding to the partially filled orbitals.

36 MATERIALS SCIENCE↗

Lifetime measurements and shape coexistence in {sup 144}Dy

The known level scheme of {sup 144}Dy has been extended and lifetime measurements have been made with the recoil-distance Doppler-shift method. Reduced transition probabilities and deformations have been determined for four low-lying transitions. These states form part of the first observed band crossing, giving information on the change in nuclear deformation resulting from the rearrangement of h{sub 11/2} protons in the nucleus. Two bands built upon excited 10{sup +} states have been assigned pi(h{sub 11/2}){sup 2} prolate and nu(h{sub 11/2}){sup -2} oblate configurations with tau=12(2)ps and 0.01<tau < or approx. 16ns, respectively. These long lifetimes are reasoned to be a result of shape coexistence at low energy and moderate spin. A known four-quasiparticle dipole band has been extended to higher spin and lifetime measurements suggest a long-lived bandhead state. In this case, the excited states in the band may be consistent with a shears model interpretation of a magnetic dipole rotor. However, the measured B(M1)/B(E2) branching ratios reveal a larger than expected deformed rotational component compared with that in the analogous band in the lower mass isotone {sup 142}Gd.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Neutron emission during the implosion of a wire array onto a deuterated fiber

Results are presented from Z-pinch experiments performed in the S-300 facility (Kurchatov Institute) at a maximum current of 2 MA and current rise time of 100 ns. The Z-pinch load was a 1-cm-long 1-cmdiameter cylindrical array made of 40 tungsten wires with a total mass of 160 {mu}g, at the axis of which a 100-{mu}m-diameter (CD{sub 2}){sub n} deuterated fiber was installed. Hard X-ray and neutron signals were recorded using five scintillation detectors oriented in one radial and two axial directions. The maximum neutron yield from the DD reaction reached 3 x 10{sup 9} neutrons per shot. The average neutron energy was determined from time-of-flight measurements and Monte Carlo simulations under the assumption that the neutron emission time was independent of the neutron energy. The average neutron energy in different experiments was found to vary within the range 2.5-2.7 MeV. The fact that the average neutron energy was higher than 2.45 MeV (the energy corresponding to the DD reaction) is attributed to the beam-target collisional mechanism for the acceleration of deuterons to 100-500 keV.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗