Search NASA⌕ Search

SEARCH · Search NASA

Results for “usability experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Experimental investigations on sodium plugging in narrow flow channels.

A series of experiments was performed to investigate the potential for plugging of narrow flow channels of sodium by impurities (e.g., oxides). In the first phase of the experiments, clean sodium was circulated through the test sections simulating flow channels in a compact diffusion-bonded heat exchanger such as a printed circuit heat exchanger. The primary objective was to see if small channels whose cross sections are semicircles of 2, 4, and 6 mm in diameter are usable in liquid sodium applications where sodium purity is carefully controlled. It was concluded that the 2-mm channels, the smallest of the three, could be used in clean sodium systems at temperatures even as low as 100 to 110 C without plugging. In the second phase, sodium oxide was added to the loop, and the oxygen concentration in the liquid sodium was controlled by means of varying the cold-trap temperature. Intentional plugging was induced by creating a cold spot in the test sections, and the subsequent plugging behavior was observed. It was found that plugging in the 2-mm test section was initiated by lowering the cold spot temperature below the cold-trap temperature by 10 to 30 C. Unplugging of the plugged channels was accomplished by heating the affected test section.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

A Comparative Analysis of Lithium-Ion Battery Chemistries for Cold-Climate Maritime Applications

Energy storage, primarily in the form of electrochemical batteries, is critical for enabling integration of marine energy (e.g., power from waves and currents) with end-use applications at sea due to the periodicity of the resources and requirement of consistent, smooth power delivery. Powering high-latitude coastal or ocean-based observing systems has been identified as a high value-proposition use case, exemplifying the concept of Powering the Blue Economy. An existing power system implementation for such a platform uses solar panels coupled to rechargeable lithium-ion batteries, augmented by a non-rechargeable backup bank used to power heaters in winter months. As wave energy is a potential resource for powering this and similar use cases and is strongest when solar power is most limited, it was hypothesized that integration of wave power would alleviate some of the challenges in cold climates related to energy storage. In this work, we investigate the use case scenario in simulation and perform a comparative test of commercially-available lithium-ion battery chemistry formulations to determine the most appropriate choice for the application. The experiment compared the most commonly-used lithium-based battery types (NCM, NCA, and LFP) in laboratory conditions emulating a battery enclosure thermally coupled to freezing seawater using an industrial battery performance tester in PNNL's arctic simulation lab. Battery strings were repeatedly cycled (i.e., charged, discharged, rested) and their usable capacity was measured. Both NCM and NCA strings exhibited degradation upon cycling, while the LFP string maintained stable operation through over 700 complete cycles. Though lower in baseline capacity, LFP are recommended for this and similar low-temperature applications with access to high levels of bulk charging current (e.g., from high-energy wave events) and their use may reduce the cost and complexity of battery conditioning and protection apparatus.

16 TIDAL AND WAVE POWER↗

Usability and Optimization Improvements in MOOSE

The Multiphysics Object-Oriented Simulation Environment (MOOSE) framework is a foundational capability used by the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program to create over 15 different simulation tools for advanced nuclear reactors. Due to MOOSE’s broad use, improvements to the framework in support of modeling and simulation goals are critical to the program. Such improvements can take many forms, including optimization, improved user experience, streamlined application programming interfaces (APIs), parallelism, and new capabilities. The work described in this report was conducted in direct support of the simulation tools and has already been deployed. The capabilities were implemented in the same order as they are covered in this report: multiple nonlinear systems in the same input file, implementation of generic field transfers and other transfer system enhancements, support for stateful material property redistribution for adaptivity and distributed meshes, and dynamic linking and loading of individually compiled applications. These four additions are fundamental capabilities that will be leveraged by many NEAMS applications.

97 MATHEMATICS AND COMPUTING↗

Evaluation of an x-ray multilayer mirror for radiography at sub-1-keV photon energies

An x-ray multilayer mirror on a spherical substrate designed for near-normal incidence with a photon energy of ~738 eV (F He α ) was procured and tested. This device is intended to be used for in-flight radiography of the shell in inertial confinement fusion experiments with cryogenic targets on the OMEGA laser at the Laboratory for Laser Energetics. Experiments in self-emission on a small (~10 J) laser system showed that the reflectivity of the mirror is high enough to record an image at laser energies as low as 0.1 J. Furthermore, a second set of tests in backlighting geometry on a larger (kJ)-scale, short-pulse laser yielded usable radiographs with laser energies as low as 40 J with a spatial resolution of ~10 μm.

47 OTHER INSTRUMENTATION↗

Laboratory evaluation of cyclic underground hydrogen storage in the Temblor sandstone of the San Joaquin Basin, California

Underground Hydrogen Storage (UHS) in depleted oil and gas reservoirs could provide a cost-effective solution to balance seasonal fluctuations in renewable energy generation. However, data and knowledge on UHS at subsurface conditions are limited so it is difficult to estimate how effective this type of storage could be. In this study, we perform high pressure experiment to measure the effectiveness of cyclic hydrogen (H 2 ) storage in a specimen of Temblor sandstone retrieved from the San Joaquin Basin of California. Our experiment mimics reservoir pressure conditions to measure H 2 -brine relative permeability and fluid-rock interactions over the course of ten charging and discharging cycles. Initial gas breakthrough occurred at 15 % to 25 % H2 saturation in the specimen with 3 % NaCl brine as the resident fluid. Continuing injecting to 4 pore volumes (PV) of H 2 yielded an asymptotic H 2 saturation of 38 % to 41 %, a level often referred to as the irreducible gas saturation based on two-phase flow. The boundary condition in this study mimics the near wellbore region, which experiences bi-directional H 2 flow. This bi-directional flow led to evaporative drying of the specimen resulting in 94 % H 2 saturation at the end of 10th cycle. This indicates that cyclic flow and evaporative drying can lead to more efficient reservoir storage where a larger fraction of the reservoir porosity is usable to store H 2 . The produced gas stream consisted of H 2 mixed with 8 % to 22 % H 2 O, indicating formation dry-out by evaporation. Meanwhile, produced water chemistry indicated calcite and silicate dissolution, with calcite sourced from fossil fragments. This led to a loss of cementation and weakened the rock sample. Combined, our results indicate dry-out, compaction, increased H 2 saturation, rock weakening, and permeability loss during cyclic UHS. Overall, we anticipate that the combined effects should lead to higher than anticipated UHS storage efficiency per volume of sandstone reservoir rock.

08 HYDROGEN↗

Lowering entry barriers to developing custom simulators of distributed applications and platforms with SimGrid

Researchers in parallel and distributed computing (PDC) often resort to simulation because experiments conducted using a simulator can be for arbitrary experimental scenarios, are less resource-, labor-, and time-consuming than their real-world counterparts, and are perfectly repeatable and observable. Many frameworks have been developed to ease the development of PDC simulators, and these frameworks provide different levels of accuracy, scalability, versatility, extensibility, and usability. Further, the SimGrid framework has been used by many PDC researchers to produce a wide range of simulators for over two decades. Its popularity is due to a large emphasis placed on accuracy, scalability, and versatility, and is in spite of shortcomings in terms of extensibility and usability. Although SimGrid provides sensible simulation models for the common case, it was difficult for users to extend these models to meet domain-specific needs. Furthermore, SimGrid only provided relatively low-level simulation abstractions, making the implementation of a simulator of a complex system a labor-intensive undertaking. In this work we describe developments in the last decade that have contributed to vastly improving extensibility and usability, thus lowering or removing entry barriers for users to develop custom SimGrid simulators.

97 MATHEMATICS AND COMPUTING↗

Using Big Data Technologies for HEP Analysis

The HEP community is approaching an era were the excellent performances of the particle accelerators in delivering collision at high rate will force the experiments to record a large amount of information. The growing size of the datasets could potentially become a limiting factor in the capability to produce scientific results timely and efficiently. Recently, new technologies and new approaches have been developed in industry to answer to the necessity to retrieve information as quickly as possible to analyze PB and EB datasets. Providing the scientists with these modern computing tools will lead to rethinking the principles of data analysis in HEP, making the overall scientific process faster and smoother. In this paper, we are presenting the latest developments and the most recent results on the usage of Apache Spark for HEP analysis. The study aims at evaluating the efficiency of the application of the new tools both quantitatively, by measuring the performances, and qualitatively, focusing on the user experience. The first goal is achieved by developing a data reduction facility: working together with CERN Openlab and Intel, CMS replicates a real physics search using Spark-based technologies, with the ambition of reducing 1 PB of public data in 5 hours, collected by the CMS experiment, to 1 TB of data in a format suitable for physics analysis. The second goal is achieved by implementing multiple physics use-cases in Apache Spark using as input preprocessed datasets derived from official CMS data and simulation. By performing different end-analyses up to the publication plots on different hardware, feasibility, usability and portability are compared to the ones of a traditional ROOT-based workflow.

Cremonesi, Matteo↗

End-to-end I/O portfolio for the summit supercomputing ecosystem

The I/O subsystem for the Summit supercomputer, No. 1 on the Top500 list, and its ecosystem of analysis platforms is composed of two distinct layers, namely the in-system layer and the center-wide parallel file system layer (PFS), Spider 3. The in-system layer uses node-local SSDs and provides 26.7 TB/s for reads, 9.7 TB/s for writes, and 4.6 billion IOPS to Summit. The Spider 3 PFS layer uses IBM's Spectrum Scale™ and provides 2.5 TB/s and 2.6 million IOPS to Summit and other systems. While deploying them as two distinct layers was operationally efficient, it also presented usability challenges in terms of multiple mount points and lack of transparency in data movement. To address these challenges, we have developed novel end-to-end I/O solutions for the concerted use of the two storage layers. We present the I/O subsystem architecture, the end-to-end I/O solution space, their design considerations and our deployment experience.

Oral, Sarp↗

CASL Enterprise Project Management (EPM) Tool, a Unified PM Platform

The Consortium for Advanced Simulation of Light Water Reactors (CASL) applies existing modeling and simulation (M&S) capabilities and develops advanced capabilities to create a usable environment for predictive simulation of light water reactors (LWRs). This environment, designated the Virtual Environment for Reactor Applications (VERA), incorporates science based models, state of the art numerical methods, multi physics integrated solutions, modern computational science and engineering practices, and uncertainty quantification (UQ). Ongoing validation of VERA relies upon data from operating pressurized water reactors (PWRs), single effect experiments, and integral tests. VERA will be designed for implementation on current desktop computers, capacity platforms (e.g., clusters), and the engineering workstations of the future. Selected components will also be capable of executing on current U.S. Department of Energy (DOE) capability and leadership class high performance computer (HPC) systems.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Timing Resolution tests of Silicon Photomultipliers for use at the Jefferson Lab

Silicon Photomultipliers are currently under much scrutiny at the Jefferson Lab. Their small size, and ability to operate unshielded in strong magnetic fields make them ideal for use in particle accelerators. At the Jefferson Lab these SiPMs are slated for possible use in several detector systems in the new 12GeV upgrade. One such project is the Central Time of Flight (CTOF) detector in CLAS Hall B, whose goal is to identify and distinguish between particle species using Timing and Momentum calculations. The Photomultipliers in this detector will experience magnetic fields of up to 5 T and require timing resolutions of 50ps, the smallest of any detector in the lab. Currently this role is filled by Hammamatsu R2083 PMTs, which require robust magnetic shielding. Resolution tests were performed with directed LED light at various frequencies and intensities. The SiPMs were found to have a resolution of 76ps at usable surface areas, 50{\%} greater than the required maximum of 50ps for CTOF, but well below that necessary for other detector systems, such as the Central Neutron Detector and Photon Tagger arrays.

Reustle, Alexander↗

Knowledge Framework Implementation with Multiple Architectures - 13090

Multiple kinds of knowledge management systems are operational in public and private enterprises, large and small organizations with a variety of business models that make the design, implementation and operation of integrated knowledge systems very difficult. In recent days, there has been a sweeping advancement in the information technology area, leading to the development of sophisticated frameworks and architectures. These platforms need to be used for the development of integrated knowledge management systems which provides a common platform for sharing knowledge across the enterprise, thereby reducing the operational inefficiencies and delivering cost savings. This paper discusses the knowledge framework and architecture that can be used for the system development and its application to real life need of nuclear industry. A case study of deactivation and decommissioning (D and D) is discussed with the Knowledge Management Information Tool platform and framework. D and D work is a high priority activity across the Department of Energy (DOE) complex. Subject matter specialists (SMS) associated with DOE sites, the Energy Facility Contractors Group (EFCOG) and the D and D community have gained extensive knowledge and experience over the years in the cleanup of the legacy waste from the Manhattan Project. To prevent the D and D knowledge and expertise from being lost over time from the evolving and aging workforce, DOE and the Applied Research Center (ARC) at Florida International University (FIU) proposed to capture and maintain this valuable information in a universally available and easily usable system. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

D and D Knowledge Management Information Tool - 2012 - 12106

Deactivation and decommissioning (D and D) work is a high priority activity across the Department of Energy (DOE) complex. Subject matter specialists (SMS) associated with the different ALARA (As-Low-As-Reasonably-Achievable) Centers, DOE sites, Energy Facility Contractors Group (EFCOG) and the D and D community have gained extensive knowledge and experience over the years in the cleanup of the legacy waste from the Manhattan Project. To prevent the D and D knowledge and expertise from being lost over time from the evolving and aging workforce, DOE and the Applied Research Center (ARC) at Florida International University (FIU) proposed to capture and maintain this valuable information in a universally available and easily usable system. D and D KM-IT provides single point access to all D and D related activities through its knowledge base. It is a community driven system. D and D KM-IT makes D and D knowledge available to the people who need it at the time they need it and in a readily usable format. It uses the World Wide Web as the primary source for content in addition to information collected from subject matter specialists and the D and D community. It brings information in real time through web based custom search processes and its dynamic knowledge repository. Future developments include developing a document library, providing D and D information access on mobile devices for the Technology module and Hotline, and coordinating multiple subject matter specialists to support the Hotline. The goal is to deploy a high-end sophisticated and secured system to serve as a single large knowledge base for all the D and D activities. The system consolidates a large amount of information available on the web and presents it to users in the simplest way possible. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Multiphysics Modeling of Microreactors with NEAMS codes, and Validation Based on KRUSTY Reactivity Insertion

The NEAMS Multiphysics Applications team continues to assess code usability and functionality for microreactor design and safety analyses, while demonstrating that NEAMS tools capture both steady-state and transient behavior across distinct microreactor concepts. In FY2025, the team advanced full-core, high-fidelity, multiphysics models that solve more complex problems and strengthen verification/validation for several microreactor systems: heat-pipe microreactor (HPMR), gas-cooled microreactor (GCMR), and the KRUSTY experiment. These models employ the MOOSE MultiApp/Transfers architecture with Griffin for neutronics, BISON for heat conduction/thermomechanics, Sockeye for heat pipes, SAM/THM for coolant channels and loops, and SWIFT for hydride behavior, with meshes generated via the MOOSE Reactor Module. The graphite models available in the Grizzly code were also investigated for future analyses. For the HPMR, a Na-HPMR variant was constructed to align with recently validated heat-pipe experiments and Sockeye’s LCVF capability, enabling mechanistic heat-pipe transients and startup modeling. The Na-HPMR will serve as the primary model for HPMR investigations in upcoming tasks. The load-following and single heat-pipe failure scenarios (Griffin/BISON/Sockeye), which were previously modeled for the K-HPMR, were replicated for the Na-HPMR, showing strong negative temperature feedback and highly localized thermal effects, respectively, while the startup case captured vapor-front progression and heat-removal activation. Solid mechanics was added to the previously built K-HPMR full-core model in BISON, showing minimal impact on steady-state reactivity yet enabling stress-field predictions that prepare the path for full-core TRISO performance analyses. For the GCMR, automated steady-state and four transient scenarios were executed using Griffin/BISON/SAM/SWIFT. Results confirm robust inherent safety: power collapses promptly in loss-of-cooling events, the inlet-temperature drop settles to a new equilibrium, and a single-channel blockage yields only a ~30 K local fuel-temperature rise with <0.4% power decrease. SWIFT-predicted hydrogen redistribution affects reactivity during both steady-state and transient conditions, underscoring its importance. A Brayton-cycle balance of plant (BOP) model in SAM/THM demonstrated stable startup behavior, and xenon-driven reactivity during load following was analyzed. To improve TRISO-compact temperature fidelity, a fast multiscale Heat Source Decomposition (HSD) treatment was implemented. Against heterogeneous benchmarks, HSD reduces underprediction of kernel temperatures and lowers predicted peak powers in reactivity-insertion transients compared to previous homogenized models. KRUSTY warm-critical validation progressed from FY2024 baselines: the 15Ȼ insertion shows excellent agreement in peak power (~2% high) and temperature trends, and the 30Ȼ case was automated via a feedback controller that maintained power near 3 kW for ~150 s with close agreement to data. The successful modeling of the warm critical tests has laid a strong foundation for simulating more complex nuclear system tests in the years ahead. Throughout FY2025, developer feedback was provided (e.g., MOOSE batch mesh generation, distributed pre-split meshes, Griffin sweeper on displaced meshes), several new models were contributed to the Virtual Test Bed, and an OECD-NEA WPRS multiphysics benchmark based on the HPMR was initiated to enable broader cross-comparison and best-practice development with the nuclear community at large.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Improving the Usability of Integrated Assessment for Adaptation Practice: Insights from the U.S. Southeast Energy Sector

Energy systems comprise a key sector of the U.S. economy, and one that has been identified as potentially vulnerable to the effects of climate variability and change. However, understanding of adaptation processes in energy companies and private entities more broadly is limited. It is unclear, for example, the extent to which energy companies are well-served by existing knowledge and tools emerging from the impacts, adaptation and vulnerability (IAV) and integrated assessment modeling (IAM) communities and/or what experiments, analyses, and model results have practical utility for informing adaptation in the energy sector. As part of a regional IAM development project, we investigated available evidence of adaptation processes in the energy sector, with a particular emphasis on the U.S. Southeast and Gulf Coast region. A mixed methods approach of literature review and semi-structured interviews with key informants from energy utilities was used to compare existing knowledge from the IAV community with that of regional stakeholders. That comparison revealed that much of the IAV literature on the energy sector is climate-centric and therefore disconnected from the more integrated decision-making processes and institutional perspectives of energy utilities. Increasing the relevance of research and assessment for the energy sector will necessitate a greater investment in integrated assessment and modeling efforts that respond to practical decision-making needs as well as greater collaboration between energy utilities and researchers in the design, execution, and communication of those efforts.

de Bremond, Ariane↗

CatMass : software for calculating optimal sample masses for X-ray absorption spectroscopy experiments involving complex sample compositions

This paper presents software for calculating the optimal mass of samples with complex compositions ( e.g. supported metal catalysts) for X-ray absorption spectroscopy (XAS) and scattering measurements. The ability to calculate the sample mass and other relevant parameters needed for an XAS measurement allows experimentalists to be better prepared in terms of detector selection, energy range of scan and overall time needed to complete the measurement, thus increasing efficiency. CatMass builds on existing sample mass calculators allowing users to determine the optimum sample preparation, collection geometry, usable energy range for a scan and approximate edge step of the absorption event. Visualization tools present the absorption calculation results in a format familiar to XAS experimentalists, with the added ability to save calculations and plots for future reference or recalculation. CatMass is a program broadly applicable in catalysis and is helpful for users with complex samples due to composition/stoichiometry or multiple competing elements.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Leveraging Zone Air Temperature Data to Improve Physics-Based Energy Simulation of Existing Buildings

The paper introduces a hybrid modelling approach that enhances the accuracy and usability of physics-based energy simulation for existing buildings. The approach leverages measured zone air temperature data streams -- increasingly available from smart thermostats -- to derive difficult-to-obtain input parameters for internal thermal mass and infiltration airflow rates. It does so using a reformulated inverse heat balance algorithm. We implemented the inverse algorithms in EnergyPlus and used LBNL's Facility for Low Energy eXperiments (FLEXLAB) for demonstration and validation

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

D and D knowledge management information tool - a web based system developed to share D and D knowledge worldwide

Deactivation and decommissioning (D and D) work is a high risk and technically challenging enterprise within the U.S. Department of Energy complex. During the past three decades, the DOE's Office of Environmental Management has been in charge of carrying out one of the largest environmental restoration efforts in the world: the cleanup of the Manhattan Project legacy. In today's corporate world, worker experiences and knowledge that have developed over time represent a valuable corporate asset. The ever-dynamic workplace, coupled with an aging workforce, presents corporations with the ongoing challenge of preserving work-related experiences and knowledge for cross-generational knowledge transfer to the future workforce [5]. To prevent the D and D knowledge base and expertise from being lost over time, the DOE and the Applied Research Center at Florida International University (FIU) have developed the web-based Knowledge Management Information Tool (KM-IT) to capture and maintain this valuable information in a universally available and easily accessible and usable system. The D and D KM-IT was developed in collaboration with DOE Headquarters (HQ), the Energy Facility Contractors Group (EFCOG), and the ALARA [as low as reasonably achievable] Centers at Savannah River Sites to preserve the D and D information generated and collected by the D and D community. This is an open secured system that can be accessed from https://www.dndkm.org over the web and through mobile devices at https://m.dndkm.org. This knowledge system serves as a centralized repository and provides a common interface for D and D-related activities. It also improves efficiency by reducing the need to rediscover knowledge and promotes the reuse of existing knowledge. It is a community-driven system that facilitates the gathering, analyzing, storing, and sharing of knowledge and information within the D and D community. It assists the DOE D and D community in identifying potential solutions to their problem areas by using the vast resources and knowledge base available throughout the global D and D community. The D and D KM-IT offers a mechanism to the global D and D community for searching relevant D and D information and is focused on providing a single point of access into the collective knowledge base of the D and D community within and outside of the DOE. Collecting information from subject matter specialists, it builds a knowledge repository for future reference archiving Lessons Learned, Best Practices, ALARA reports, and other relevant documents and maintains a secured collaboration platform for the global D and D community to share knowledge. With the dynamic nature and evolution of the D and D knowledge base due to multiple factors such as changes in the workforce, new technologies and methodologies, economics, and regulations, the D and D KM-IT is being developed in a phased and modular fashion. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

“Age” Determination of Irradiated Materials Utilizing Inductively Coupled Plasma Mass Spectrometric (ICP-MS) Detection

A gas pressurized extraction chromatography (GPEC) system has been developed to perform elemental separations on radioactive samples to determine total and isotopic compositions of Cs and Ba from an irradiated salt sample, fuel sample and two sealed radiation sources. The separation is necessary to remove isobaric interferences in the determination of 137Cs, 135Cs, 137Ba, 135Ba, which are used to determine the age of a sample from radioactive decay or purification. The micro-column extraction chromatography system employs compressed nitrogen to move liquid through the system, compared to gravity or pumped liquids that are typically used for separations. The use of compressed gas allows for accurate and precise recovery of all liquids put into the chromatography system, enabling very accurate dilutions. The use of a small analytical column permits the use of very small amounts of liquids to be used. As a benefit, the amount of radiological waste that is generated in the separation process is minimized. For this work, a commercially available Sr-Resin™ was used to perform the separation for the above mentioned analytes. The column consists of a 7 inch piece of 1/16 in. O.D. x 0.030 in I.D. Teflon™ tubing having an internal volume of 81 µL. To this column, 49 mg of resin was added. The columns are re-usable after regeneration with 3 M HNO3. All samples were separated using batch collection, although real time analysis is possible with the current experimental design. A 1 % acetic acid solution was determined to be the best extractant for Ba. A flow rate of 0.1 mL/min was determined to be optimal for the separation of Ba. Complete recovery of the Cs and Ba was achieved, within the systematic error of the experiments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗