Search NASA⌕ Search

SEARCH · Search NASA

Results for “water activity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Crystalline Disposal R&D at LBNL: FY20 Progress Report

Within the Spent Fuel & Waste Science and Technology (SFWST) Program, research work continues further with the goal to better understand long-term performance of disposal systems in three main geologic rock types: clay/shale, salt, and crystalline rock. This report documents LBNL’s research activities related to investigations of crystalline host rock according to the scope of two work packages: SF-20LB01030207 “Crystalline International Collaborations – LBNL,” and SF-20LB01030203 “Crystalline Disposal R&D – LBNL.” These research activities correspond are related to key Features, Events, and Processes (FEPs), ranked in importance from medium to high, as listed in Table 7 of the Used Fuel Disposition Campaign Disposal Research and Development Roadmap (FCR&D-USED-2011-000065 REV0) (Nutt, 2011). Specifically, these research activities address FEP 2.2.01, Excavation Disturbed Zone (EZD). The results of these research activities provide important insights into understanding and predicting flow and transport processes that could occur in low-permeability crystalline rocks, in which fractures might serve as main conduits for fluid flow and radionuclide transport. The evolution of the EDZ during the excavation of the tunnel as well as the evolution of microcrack growth within the EDZ after the emplacement of backfill are critical for predicting the long- term behavior of the EDZ. A number of factors including stress, temperature, water activity, capillary pressure, chemistry, and mineralogy can affect the rock evolution, which require advanced experimental tools to study it.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS2005

Abundance and Speciation of Water and Sulfate at Gusev Crater and Meridiani Planum

A major science goal of the Mars Exploration Rover (MER) mission is to search for evidence of water activity, and direct mineralogical evidence for aqueous activity has been reported for Meridiani Planum in the form of the iron sulfate hydroxide mineral jarosite and at Gusev crater in the form of goethite. The Spirit and Opportunity rovers have each collected 110+ Moessbauer (MB) and 75+ Alpha Particle X-Ray Spectrometer (APXS) spectra from Gusev crater and Meridiani Planum [1 - 4]. In this abstract, we use mineralogical and elemental data, primarily from the Moessbauer and APXS instruments, to infer the speciation and estimate the abundance of sulfate and water (as either the H2O molecule or the hydroxyl anion) at Gusev crater and Meridiani Planum. Throughout the abstract, we adopt a format for mineral formulas that shows water explicitly rather than the usual practice of structure-based formulas (e.g., for goethite we write Fe2O3xH2O instead of FeOOH).

Ming, D. W.↗
NASA NTRS2012

The Icebreaker Life Mission to Mars: A Search for Biomolecular Evidence for Life

The search for evidence of life on Mars is the primary motivation for the exploration of that planet. The results from previous missions, and the Phoenix mission in particular, indicate that the ice-cemented ground in the north polar plains is likely to be the most recently habitable place that is currently known on Mars. The near-surface ice likely provided adequate water activity during periods of high obliquity, ~ 5 Myr ago. Carbon dioxide and nitrogen is present in the atmosphere, and nitrates may be present in the soil. Perchlorate in the soil together with iron in basaltic rock provides a possible energy source for life. Furthermore, the presence of organics must once again be considered, as the results of the Viking GCMS are now suspect given the discovery of the thermally reactive perchlorate. Ground-ice may provide a way to preserve organic molecules for extended periods of time, especially organic biomarkers. The Mars Icebreaker Life mission focuses on the following science goals: 1. Search for specific biomolecules that would be conclusive evidence of life. 2. A general search for organic molecules in the ground ice. 3. Determine the processes of ground ice formation and the role of liquid water. 4. Understand the mechanical properties of the Mars polar ice-cemented soil. 5. Assess the recent habitability of the environment with respect to required elements to support life, energy sources, and possible toxic elements. And 6. Compare the elemental composition of the northern plains with mid-latitude sites. The Icebreaker Life payload has been designed around the Phoenix spacecraft and is targeted to a site near the Phoenix landing site. However, the Icebreaker payload could be supported on other Mars landing systems. Preliminary studies of the SpaceX Dragon lander show that it could support the Icebreaker payload for a landing either at the Phoenix site or at mid-latitudes. Duplicate samples could be cached as a target for possible return by a Mars Sample Return mission. If the samples were shown to contain organic biomarkers interest in returning them to Earth would be high.

Life detection↗
DOE OSTI2021

Microbiomes of commercially-available pine nuts and sesame seeds

Metagenomic analysis of food is becoming more routine and can provide important information pertaining to the shelf life potential and the safety of these products. However, less information is available on the microbiomes associated with low water activity foods. Pine nuts and sesame seeds, and food products which contain these ingredients, have been associated with recalls due to contamination with bacterial foodborne pathogens. The objective of this study was to identify the microbial community of pine nuts and sesame seeds using targeted 16S rRNA sequencing technology. Ten different brands of each seed type were assessed, and core microbiomes were determined. A total of 21 and 16 unique taxa with proportional abundances >1% in at least one brand were identified in the pine nuts and sesame seeds, respectively. Members of the core pine nut microbiome included the genera Alishewanella, Aminivibrio, Mycoplasma, Streptococcus, and unassigned OTUs in the families of Desulfobacteraceae and Xanthomonadaceae. For sesame seeds, the core microbiome included Aminivibrio, Chryseolina, Okibacterium, and unassigned OTUs in the family Flavobacteriaceae. The microbiomes of these seeds revealed that these products are dominated by environmental bacterial genera commonly isolated from soil, water, and plants; bacterial genera containing species known as commensal organisms were also identified. Understanding these microbiomes can aid in the risk assessment of these products by identifying food spoilage potential and community members which may co-enrich with foodborne bacterial pathogens.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

How do super concentrated electrolytes push the Li-ion batteries and supercapacitors beyond their thermodynamic and electrochemical limits?

Increasing the energy density of energy storage devices is currently the key target of many battery and supercapacitor research activities. For both types of devices, the electrochemical stability window (ESW) determines the effective energy density of the device. ESWs are defined by the effective oxidation and reduction potentials of the electrolyte, which are controlled by many various factors, including the HOMO/LUMO (highest/lowest unoccupied molecular orbital) energies of the electrolyte molecules, the nature of the electrode/electrolyte interphases, and other physicochemical properties. The concentration of the electrolyte would affect the HOMO/ LUMO levels thus also change the ESW. A higher concentration of salt induces specific arrangements among the anion, cation, and solvent molecules of an electrolyte, altering the bulk behavior of the electrolyte, resulting in drastic change in the electrode interfaces. These uniquely modified physicochemical properties extend the ESW in several different ways, including the enhancement in the kinetic stability of the electrodes, as well as the thermodynamic and Nernst shifts of the oxidation/reduction potentials of the electrolyte. For organic electrolytes, it is the reduced amount of free solvent molecules that plays the key role in such changes; whereas for aqueous electrolytes, it is the scarcity of free water molecules and the reduced water activity that control the key properties of the electrolyte. Here, we focus on elucidating the fundamental structural changes occurring within an electrolyte system with increasing salt concentrations. The underlying mechanisms which not only facilitates the extension of the ESW, but also enables higher rate capabilities and mitigates aluminum dissolution for batteries with organic electrolytes, are meticulously explained. Further, we thoroughly discuss the importance of high-voltage stability in aqueous battery systems by exploiting the changed properties observed with higher concentrations of salts. To finish, high-voltage supercapacitors enabled by superconcentrated electrolytes are also explored.

25 ENERGY STORAGE↗
DOE OSTI2023

Combined effects of lipase and Lactiplantibacillus plantarum 1‐24‐LJ on physicochemical property, microbial succession and volatile compounds formation in fermented fish product

Abstract BACKGROUND Studies have shown that either the addition of starter culture or enzyme can improve fermentation in fish or other products. However, little research has been carried out on the effects of coupling starter cultures with lipase on the microbial community and product quality. Suanzhayu is a Chinese fermented fish product that mainly relies on spontaneous fermentation, resulting in an unstable flavor and quality. The present study investigated the impact of lipase and Lactiplantibacillus plantarum 1‐24‐LJ on the quality of Suanzhayu . RESULTS Inoculation decreased pH and 2‐thiobarbituric acid reactive substances (TBARS) values, and also helped the dominance of the strain in the ecosystem, whereas lipase addition raised TBARS values and had little effect on pH, water activity ( a w ) and microbiota. The addition of lipase and/or Lpb. plantarum increased the content of alcohols, aldehydes, ketones, esters and umami amino acids. The co‐additions with the most significant effect and the total contents of volatile compounds (VCs) and free amino acids (FAAs) were 1801.92 g per 100 g and 21 357.05 mg per 100 g, respectively. Former‐ Lactobacillus was negatively correlated with pH, a w and Prevotella , but positively with VCs (ethyl ester of heptanoic acid, ethyl ester of octanoic acid) and FAAs (Tyr, Phe). Furthermore, adding Lpb. plantarum 1‐24‐LJ alone or in combination with lipase shortened the fermentation process. CONCLUSION The present study provides a recommended Suanzhayu process approach for improving product quality and flavor, as well as shortening fermentation time, by adding Lpb. plantarum 1‐24‐LJ with or without lipase. © 2023 Society of Chemical Industry.

Zhang, Zuoli↗
DOE OSTI2022

Growth and inactivation of Listeria monocytogenes in sterile extracts of fruits and vegetables: Impact of the intrinsic factors pH, sugar and organic acid content

Intrinsic characteristics of fresh produce, such as pH, water activity, acid content and nutrient availability are critical factors in determining the survival and growth of Listeria monocytogenes (Lm). In this study, sterile fresh produce juice was used to analyze Lm growth potential among 14 different commodities and to identify physicochemical characteristics in those juices that affect Lm growth. Significant growth of Lm was observed in juices with pH ≥5.6 and low acidity (0.04–0.07 % titratable acidity (TA)) (cantaloupe, carrot, celery, green pepper, parsley, and romaine lettuce), slight reduction of Lm was observed in juices with pH 4.1 (tomato) and pH 3.9 (mango), and no Lm counts were recovered from juices with pH ≤3.8 and high acidity (0.28–1.17 % TA) (apple, blueberry, grape, peach, and pineapple). Although these acidic fruit juices possessed a high sugar content, the pH and acidity of produce juice seemed to be the primary determinants for Lm growth. The neutralization of acidic juices (i.e., Fuji and Gala apple, blueberry, grape, mango, pineapple, peach, and tomato) enabled Lm growth at 37 °C in all juices except for Gala apple and peach. Strong decline in Lm populations in Gala apple, grape and peach juices might be linked to sensitivity to organic acids, such as malic acid. As a result, Lm populations significantly decreased in pH-neutral (7.6) cauliflower juice, suggesting that potential antilisterial substances may play a role in Lm decline in cauliflower juice.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Dynamics of Liquid–Liquid Phase Separation in Submicrometer Aerosol

Nanoscale materials, when compared to their bulk components, possess unique properties. In particular, shifts in phase transitions can occur for submicron particles. For instance, small particles do not undergo the process of liquid-liquid phase separation (LLPS). LLPS has applications in emulsions such as Janus particles, controllable morphology to create drug-rich phases during drug delivery, and is often observed in atmospheric aqueous aerosol particles. In atmospheric particles, LLPS is tracked as a function of particle water activity, which is equivalent to the relative humidity (RH) at equilibrium. We probed three organic/inorganic aerosol systems in the range of RH over which phase separation occurs (SRH). Our findings indicate that SRH for submicron aerosol particles is lower than for micron-sized droplets. These findings show that it may be necessary to update the representation of phase transitions in aerosol particles in climate models. The vast majority of organic/inorganic aerosol particles have submicron diameters, and a decrease in SRH for submicron particles indicates that the current estimation of phase separated aerosols may be overestimated. Furthermore, understanding the properties of LLPS at the nanoscale can provide key parameters to describe these systems and may lead to better control of phase separation in submicron particles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Enhanced Water Interaction at Dual Cu Sites Within the Defects on a Copper Sulfide Layer

Electrochemical transformations of stable molecules and water into fuels and value-added chemicals require efficient catalyst surfaces. Introducing controlled defects at atomic scales can offer promising routes to enhance catalyst performance. In this study, we found novel dual copper site (-Cu-Cu-) defects within a copper sulfide (Cu-S) layer supported on Cu(111). Using scanning tunneling microscopy (STM) and density functional theory (DFT), we found these dual copper sites enhance molecular adsorption strength, specifically for water molecules, compared to intact Cu-S layer or pristine copper surfaces. This discovery highlights the potential of engineered dual-site copper defects to advance electrochemical catalytic materials, particularly for reactions involving water activation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

A Quantum Mechanical Study of Quartz (101) Interfacial Boundaries

Density functional theory (DFT) calculations were performed on periodic and molecular models to explore the energetics of bonding modes at quartz–quartz interfaces, common grain contacts in sandstones. Four interface types were modeled: H 2 O-mediated, silanol H-bond mediated, O–O peroxide bonds, and siloxane bonds. Each type of interface may exist in the subsurface of the Earth, depending upon water activity, temperature, and pressure, as interfacial structures are stable within DFT molecular dynamics simulations up to 473 K. The results predict interfacial energies SiOSi > SiOOSi > SiOH-6H 2 O > 2SiOH, as expected based on similar bond strengths in other systems. The proposed SiOOSi interface is not generally accounted for in chemomechanical models but could be important in sandstones at depth in the Earth. The implications for intergrain fracturing and H2 generation are discussed.

Hydrogen↗
DOE OSTI2022

Localized Hydrophobicity in Aqueous Zinc Electrolytes Improves Zinc Metal Reversibility

The rechargeability of aqueous zinc metal batteries is plagued by parasitic reactions of the zinc metal anode and detrimental morphologies such as dendritic or dead zinc. To improve the zinc metal reversibility, hereby we report a new solution structure of aqueous electrolyte with hydroxyl-ions scavengers and hydrophobicity localized in solvent clusters. In this work we show that although hydrophobicity sounds counterintuitive for an aqueous system, hydrophilic pockets may be encapsulated inside a hydrophobic outer layer and a hydrophobic anode-electrolyte interface can be generated through the addition of a cation-philic, strongly anion-phobic, and OH - -reactive diluent. The localized hydrophobicity enables less active water and less absorbed water on the Zn anode surface, which suppresses the parasitic water reductions; while the hydroxyl-ion-scavenging functionality further minimizes undesired passivation layer formation, thus leading to superior reversibility (an average Zn plating/stripping efficiency of 99.72% for 1000 cycles) and lifetime (80.6% capacity retention after 5000 cycles) of zinc batteries.

25 ENERGY STORAGE↗
DOE OSTI2025

Platinum–Ruthenium Alloys Are Not Bifunctional CO Electro-Oxidation Catalysts: A Kinetic Analysis

Electro-oxidation of CO is a common kinetic bottleneck in many types of fuel cells and organic electrosynthesis processes. Alloys of Pt and Ru are often used as anode catalysts, with high activity attributed to bifunctionality; this suggests that Ru preferentially activates water to form surface hydroxyl groups that can react with Pt-bound CO. However, rigorous kinetic measurements have not confirmed this assertion under steady-state electro-oxidation conditions. Here, CO electro-oxidation is analyzed using several commercial Pt/C and Pt 100-x Ru x /C nanoparticle catalysts in acidic and alkaline electrolytes. Kinetic observables including apparent transfer coefficients and reaction orders are measured and evaluated using a degree of rate control analysis. The kinetic observables for both Pt and PtRu alloys are most consistent with competitive adsorption and Langmuir–Hinshelwood coupling across a single site-type, rather than two distinct sites. Furthermore, the role of Ru in CO electro-oxidation is assigned to be a purely electronic effect.

Alcohols↗
DOE OSTI2022

Co-Solvent Electrolyte Engineering for Stable Anode-Free Zinc Metal Batteries

We report anode-free metal batteries can in principle offer higher energy density, but this requires them to have extraordinary Coulombic efficiency (>99.7%). Although Zn-based metal batteries are promising for stationary storage, the parasitic side reactions make anode-free batteries difficult to achieve in practice. In this work, a salting-in-effect-induced hybrid electrolyte is proposed as an effective strategy that enables both a highly reversible Zn anode and good stability and compatibility toward various cathodes. The as-prepared electrolyte can also work well under a wide temperature range (i.e., from -20 to 50 °C). It is demonstrated that in the presence of propylene carbonate, triflate anions are involved in the Zn 2+ solvation sheath structure, even at a low salt concentration (2.14 M). The unique solvation structure results in the reduction of anions, thus forming a hydrophobic solid electrolyte interphase. The waterproof interphase along with the decreased water activity in the hybrid electrolyte effectively prevents side reactions, thus ensuring a stable Zn anode with an unprecedented Coulombic efficiency (99.93% over 500 cycles at 1 mA cm –2 ). More importantly, we design an anode-free Zn metal battery that exhibits excellent cycling stability (80% capacity retention after 275 cycles at 0.5 mA cm –2 ). This work provides a universal strategy to design co-solvent electrolytes for anode-free Zn metal batteries.

25 ENERGY STORAGE↗
DOE OSTI2026

Fluid‐Driven Cohesive Strengthening: Critical Role of Reaction Kinetics as the Determinant for Frictional Stability

After an earthquake, faults in the Earth's crust lock up and slowly regain strength. This process, called fault healing, plays a key role in determining how often earthquakes happen and how large they can be. While scientists know that healing involves both mechanical friction and chemical changes in rocks, it has been unclear how these processes work together, especially over shorter timescales in laboratory settings. In our study, we ran controlled experiments on the mineral anhydrite under different fluid conditions. We found that the presence and pressure of water speeds up fault healing by triggering a chemical reaction that strengthens the fault over time. This strengthening makes the fault more resistant to sliding, which could delay future earthquakes—but also sets the stage for larger ones when they do occur. We propose a model that combines frictional and chemical processes to explain this water‐activated, time‐dependent healing. Importantly, our results show that even faults typically considered stable could still produce earthquakes if they undergo sufficient chemical healing. This has broad implications for understanding where and when earthquakes might strike, especially in fluid‐rich environments such as subduction zones and geoenergy settings.

Affinito, R [Pennsylvania State Univ., University ↗
DOE OSTI2023

Structural adaptation of fungal cell wall in hypersaline environment

Abstract Halophilic fungi thrive in hypersaline habitats and face a range of extreme conditions. These fungal species have gained considerable attention due to their potential applications in harsh industrial processes, such as bioremediation and fermentation under unfavorable conditions of hypersalinity, low water activity, and extreme pH. However, the role of the cell wall in surviving these environmental conditions remains unclear. Here we employ solid-state NMR spectroscopy to compare the cell wall architecture of Aspergillus sydowii across salinity gradients. Analyses of intact cells reveal that A. sydowii cell walls contain a rigid core comprising chitin, β-glucan, and chitosan, shielded by a surface shell composed of galactomannan and galactosaminogalactan. When exposed to hypersaline conditions, A. sydowii enhances chitin biosynthesis and incorporates α-glucan to create thick, stiff, and hydrophobic cell walls. Such structural rearrangements enable the fungus to adapt to both hypersaline and salt-deprived conditions, providing a robust mechanism for withstanding external stress. These molecular principles can aid in the optimization of halophilic strains for biotechnology applications.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

A scalable, biopolymer-based microenvironment for electrochemical CO 2 conversion to multicarbon products with current densities over 2 A cm −2

The electrochemical CO 2 reduction reaction (CO 2 RR) relies heavily on the surrounding microenvironment to promote formation of desirable multicarbon (C 2+ ) products. However, microenvironment control to achieve high C 2+ yields at industrially relevant current densities remains a crucial challenge. We report that chitosan, cellulose and chitin biopolymer coatings on CO 2 RR electrocatalysts enhance the microenvironment by increasing local CO 2 /CO concentration, reducing local water activity and providing suitable ion conductivity and local pH. This facile approach achieves C 2+ Faradaic efficiencies of 90 ± 1.7% at 1.6 A cm −2 and C 2+ Faradaic efficiency = 83 ± 3.2% at 2.2 A cm −2 with a formation rate of 5,926 μmol h −1 cm −2 . Importantly, within the cathode, these ion-conductive hydrophilic biopolymers can fully substitute traditional hydrophobic ionomers/binders, such as Nafion, challenging previous assumptions about the non-viability of hydrophilic materials for selective CO 2 RR due to excess interfacial H 2 O. These findings unveil key insights into microenvironment design to enhance C–C coupling through a simple method.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Subsurface fluvial sediments beneath InSight on Mars from geophysical constraints

Subsurface structure investigation on Mars is crucial for understanding its geological evolution and past hydrological conditions. Elysium Planitia (EP), located near the hypothesized ancient ocean shorelines, could contain clues for past water activity and paleoclimate. Here we present better-constrained subsurface models beneath InSight extending to ~800 m depth, obtained from joint inversion of seismic and seismoacoustic coupling data, and use the well-resolved subsurface structure to explore the lithological profile through rock physics models. The derived subsurface lithology agrees well with local geological context and exhibits a shallow 60-m-thick low-rigidity layer consistent with hydrated sedimentary materials. Despite possible contributions of aeolian and volcanic deposits, we favor the interpretation that the low-rigidity layer originated from fluvial activity in EP during the Hesperian or Hesperian-to-Amazonian epoch, as supported by adjacent paleo-shoreline morphology observations. These results hint at a period of warmer paleoclimate at low latitudes, possibly during high-obliquity phases of Mars’ rotational axis.

58 GEOSCIENCES↗
DOE OSTI2025

Drying of strawberries with airborne ultrasound and other integrated dehydration mechanisms

This article presents a comprehensive investigation into the drying of strawberries using multiple dehydration methods with an emphasis on energy efficiency and sustainability. Initially, an airborne ultrasonic transducer with a frequency of 21 kHz was employed in batch operations to examine the effects of controlling parameters, including applied power, distance from the transducer plate, sample thickness, and sample holder type. The Energy Ratio, defined as the ratio of thermal energy required to evaporate moisture to ultrasonic energy, was observed to reach up to 2.2, particularly during the initial stages of drying. Subsequently, the Smart Dryer integrated airborne ultrasound (US) dehydration, slot jet reattachment (SJR) nozzle convective drying, infrared (IR) drying, and their combinations, enabling a systematic exploration of various drying conditions on the drying time and quality of strawberries. The integration of airborne US with SJR nozzles and IR drying demonstrates a promising approach for optimizing drying processes. This method not only preserves the quality of dried strawberries but also improves the energy factor to 0.88, reducing drying time by 89% compared with other conditions. Key quality attributes of the dried strawberries, such as color and water activity, were evaluated to understand the influence of each drying method. The findings highlight the potential of these integrated drying techniques as sustainable solutions for efficient and high-quality strawberry dehydration.

42 ENGINEERING↗