Search NASA⌕ Search

SEARCH · Search NASA

Results for “water structure and dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

Cloud-Scale Numerical Modeling of the Arctic Boundary Layer

The research objective of this NASA grant-funded project was to determine in detail how large-scale processes. in combination with cloud-scale radiative, microphysical, and dynamical processes, govern the formation and multi-layered structure of Arctic stratus clouds. This information will be useful for developing and improving 1D (one dimensional) boundary layer models for the Arctic. Also, to quantitatively determine the effects of leads on the large-scale budgets of sensible heat, water vapor, and condensate in a variety of Arctic winter conditions. This information will be used to identify the most important lead-flux processes that require parameterization in climate models. Our approach was to use a high-resolution numerical model, the 2D (two dimensional) University of Utah Cloud Resolving Model (UU CRM), and its 1D version, the University of Utah Turbulence Closure Model (UU TCM), a boundary layer model based on third-moment turbulence closure, as well as a large-eddy simulation (LES) model originally developed by C.H. Moeng.

Kruegen, Steven K.↗
NASA NTRS2018

Natural Frequency Testing and Model Correlation of Rocket Engine Structures in Liquid Hydrogen - Phase I, Cantilever Beam

Many structures in the launch vehicle industry operate in liquid hydrogen (LH2), from the hydrogen fuel tanks through the ducts and valves and into the pump sides of the turbopumps. Calculating the structural dynamic response of these structures is critical for successful qualification of this hardware, but accurate knowledge of the natural frequencies is based entirely on numerical or analytical predictions of frequency reduction due to the added-fluid-mass effect because testing in LH2 has always been considered too difficult and dangerous. This fluid effect is predicted to be approximately 4-5% using analytical formulations for simple cantilever beams. As part of a comprehensive test/analysis program to more accurately assess pump inducers operating in LH2, a series of frequency tests in LH2 were performed at NASA/Marshall Space Flight Center's unique cryogenic test facility. These frequency tests are coupled with modal tests in air and water to provide critical information not only on the mass effect of LH2, but also the cryogenic temperature effect on Young's Modulus for which the data is not extensive. The authors are unaware of any other reported natural frequency testing in this media. In addition to the inducer, a simple cantilever beam was also tested in the tank to provide a more easily modeled geometry as well as one that has an analytical solution for the mass effect. This data will prove critical for accurate structural dynamic analysis of these structures, which operate in a highly-dynamic environment.

Brown, Andrew M.↗
NASA NTRS1999

Observations of Hurricane Georges During the Third Convection and Moisture EXperiment (CAMEX-3)

The third Convection And Moisture EXperiment (CAMEX-3) was conducted from 6 August - 27 September 1998. CAMEX is a series of field experiments sponsored by the Earth Science Enterprise of the National Aeronautics and Space Administration (NASA). The overall goal of CAMEX-3 was to study atmospheric water vapor and precipitation processes using a unique array of aircraft, balloon, and land-based remote sensors for research in tropical cyclone development, tracking, intensification, and landfalling situations using NASA-funded aircraft and surface remote sensing instrumentation. This project collected high spatial and temporal information of hurricane structure, dynamics, and motion. The ER-2 and DC-8 were the primary NASA aircraft used in the deployment flying at altitudes of 65,000 and 35,000 feet, respectively. In addition, coordinated flights with NOAA WP-3 and Air Force Reserve Hurricane Hunters C-130 aircraft were developed so that some missions involved as many as five to six aircraft. This presentation will highlight the CAMEX-3 research. It will focus primarily on the unique observations gained while studying Hurricane Georges during four missions: 1) near St. Croix, 2) over the Domican Republic, 3) over the Florida Keys, and 4) near landfall on the Mississippi coast. In particular, observations obtained through the use of the ER-2 of the orographically forced precipitation as it interacted with Hispaniola on 22 September 1998 will be shown.

Guillory, Anthony R.↗
NASA NTRS1986

Doppler lidar studies of atmospheric wind field dynamics

For the past 5 years the Wave Propagation Lab. has operated a pulsed CO2 Doppler lidar system to evaluate coherent laser radar technology and to investigate applications of the technique in atmospheric research. The capability of the system to provide measurements of atmospheric winds, backscatter, and water vapor has been extensively studied over this period. Because Doppler lidar can measure atmospheric wind structure in the clear air without degradation by terrain features, it offers a unique capability as a research tool for studies of many transient or local scale atmospheric events. This capability was demonstrated in recent field experiments near Boulder, Colo. and Midland, Tex., in which the lidar clearly depicted the wind field structure associated with several types of phenomena, including thunderstorm microbursts, valley drainage flow, and passage of a dryline front. To improve sensitivity during the periods of low aerosol backscatter, the system has recently been upgraded with new transmitter/receiver hardware. The upgraded system, which transmit 2 J per pulse of output energy at a rate of 50 Hz and incorporates computer control for automated operation, underwent calibration testing during the spring of 1986.

Hardesty, R. M.↗
NASA NTRS2001

Accelerated Testing Methodology in Constant Stress-Rate Testing for Advanced Structural Ceramics: A Preloading Technique

Preloading technique was used as a means of an accelerated testing methodology in constant stress-rate ('dynamic fatigue') testing for two different brittle materials. The theory developed previously for fatigue strength as a function of preload was further verified through extensive constant stress-rate testing for glass-ceramic and CRT glass in room temperature distilled water. The preloading technique was also used in this study to identify the prevailing failure mechanisms at elevated temperatures, particularly at lower test rate in which a series of mechanisms would be associated simultaneously with material failure, resulting in significant strength increase or decrease. Two different advanced ceramics including SiC whisker-reinforced composite silicon nitride and 96 wt% alumina were used at elevated temperatures. It was found that the preloading technique can be used as an additional tool to pinpoint the dominant failure mechanism that is associated with such a phenomenon of considerable strength increase or decrease.

Choi, Sung R.↗
NASA NTRS2001

Accelerated Testing Methodology in Constant Stress-Rate Testing for Advanced Structural Ceramics: A Preloading Technique

Preloading technique was used as a means of an accelerated testing methodology in constant stress-rate (dynamic fatigue) testing for two different brittle materials. The theory developed previously for fatigue strength as a function of preload was further verified through extensive constant stress-rate testing for glass-ceramic and CRT glass in room temperature distilled water. The preloading technique was also used in this study to identify the prevailing failure mechanisms at elevated temperatures, particularly at lower test rates in which a series of mechanisms would be associated simultaneously with material failure, resulting in significant strength increase or decrease. Two different advanced ceramics including SiC whisker-reinforced composite silicon nitride and 96 wt% alumina were used at elevated temperatures. It was found that the preloading technique can be used as an additional tool to pinpoint the dominant failure mechanism that is associated with such a phenomenon of considerable strength increase or decrease.

Choi, Sung R.↗
NASA NTRS1996

An Investigation of Current and Future Data Systems in Numerical Meteorology

The Advanced Microwave Sounding Unit (AMSU) and the Microwave Humidity Sounder (MHS) constitute the advanced microwave sounding system to be flown on the EOS-PM platform. Similar instruments (the AMSU-A corresponding to the AMSU and the AMSU-B corresponding to the MHS) are scheduled to become operational on the NOAA polar orbiting satellites beginning with NOAA-K. The unique characteristics of the AMSU-MHS instruments, as compared to the capabilities of their infrared and microwave predecessors, introduce new opportunities, and challenges, for operational retrievals of atmospheric structure. Not only will these new data improve present capabilities for the retrieval of atmospheric profiles of temperature and moisture, but they will provide the only opportunity for successfully retrieving atmospheric temperature and humidity profiles in the presence of modest amounts of cloud and precipitation. A complementary opportunity is presented by the potential of the AMSU-MHS to obtain information about the structure of clouds and precipitation. The data sets obtained will contribute to the current knowledge of global water and energy budgets, and provide critical information on the horizontal and vertical distribution of tropospheric water vapor, the spatial and temporal distribution of rain, and the relationship of cloud formation and dissipation to atmospheric dynamics and thermodynamics.

Diak, George R.↗
NASA NTRS1999

Simulations of Water Vapor in the Upper Troposphere and Lower Stratosphere

A detailed study of the water vapor budget in the upper troposphere and lower stratosphere of the "Finite Volume CCM3" (FVCCM3) model is presented. The model is based on a combination of a finite-volume dynamical core (developed by Lin and Rood) and the physical package from Version 3 of the Community Climate Model (CCM3, developed at NCAR). The model was used with a horizontal resolution of 2 by 2.5 degrees and 55 levels, with the upper boundary at 0.0lhPa and a vertical resolution of about 1.2km near the tropopause. Most results presented are from a 17-year simulation performed for the Atmospheric Model Intercomparison Project. It is shown that the model simulates a realistic thermal structure in the tropical tropopause region and that water vapor distributions are in qualitative accord with observations (which are uncertain). The longitudinal structure of the tropical atmosphere is slightly too asymmetric, compared to reasonable estimates of the truth. The processes leading to the horizontal and vertical transport of water vapor in the tropopause region are analyzed in detail. Special attention is given to the realism of horizontal transport events (the ability of the model to retain sharply defined features) and to the role of localized vertical motions in transporting air (and water vapor) between the troposphere and stratosphere. It is shown that the vertical transport of water vapor in the tropical lower stratosphere occurs at about the same rate as that observed, while in many other models this vertical transport is too fast.

Pawson, Steven↗
NASA NTRS2004

Clouds Versus Carbon: Predicting Vegetation Roughness by Maximizing Productivity

Surface roughness is one of the dominant vegetation properties that affects land surface exchange of energy, water, carbon, and momentum with the overlying atmosphere. We hypothesize that the canopy structure of terrestrial vegetation adapts optimally to climate by maximizing productivity, leading to an optimum surface roughness. An optimum should exist because increasing values of surface roughness cause increased surface exchange, leading to increased supply of carbon dioxide for photosynthesis. At the same time, increased roughness enhances evapotranspiration and cloud cover, thereby reducing the supply of photosynthetically active radiation. We demonstrate the optimum through sensitivity simulations using a coupled dynamic vegetation-climate model for present day conditions, in which we vary the value of surface roughness for vegetated surfaces. We find that the maximum in productivity occurs at a roughness length of 2 meters, a value commonly used to describe the roughness of today's forested surfaces. The sensitivity simulations also illustrate the strong climatic impacts of vegetation roughness on the energy and water balances over land: with increasing vegetation roughness, solar radiation is reduced by up to 20 W/sq m in the global land mean, causing shifts in the energy partitioning and leading to general cooling of the surface by 1.5 K. We conclude that the roughness of vegetated surfaces can be understood as a reflection of optimum adaptation, and it is associated with substantial changes in the surface energy and water balances over land. The role of the cloud feedback in shaping the optimum underlines the importance of an integrated perspective that views vegetation and its adaptive nature as an integrated component of the Earth system.

Olsen, Lola M.↗
NASA NTRS1996

The Structural Properties of Vapor Deposited Water Ice and Astrophysical Implications

Films of vapor deposited water ice at low temperature (T<30 K) show a number of interesting structural changes during a gradual warmup. We would like to talk about the structure of the low temperature high density amorphous form of water ice, the process of crystallization, and some recent work on the morphological changes of water ice films at high temperature. The studies of the high density amorphous form are from in-situ electron microscopy as well as numerical simulations of molecular dynamics and have lead to new insights into the physical distinction between this high density amorphous form and the low density amorphous form. For the process of crystallization, we propose a model that describes the crystallization of water ice from the amorphous phase to cubic ice in terms of the nucleation of small domains in the ice. This model agrees well with the behavior of water ice in our electron microscopy studies and finds that pure water above the glass transition is a strong liquid. In more recent work, we have concentrated on temperatures above the crystallization temperature and we find interesting morphological changes related to the decrease in viscosity of the amorphous component in the cubic crystalline regime. Given enough time, we would like to put these results in an astrophysical context and discuss some observed features of the frost on interstellar grains and the bulk ice in comets.

Jenniskens, P.↗
NASA NTRS2006

Computer Modeling of Protocellular Functions: Peptide Insertion in Membranes

Lipid vesicles became the precursors to protocells by acquiring the capabilities needed to survive and reproduce. These include transport of ions, nutrients and waste products across cell walls and capture of energy and its conversion into a chemically usable form. In modem organisms these functions are carried out by membrane-bound proteins (about 30% of the genome codes for this kind of proteins). A number of properties of alpha-helical peptides suggest that their associations are excellent candidates for protobiological precursors of proteins. In particular, some simple a-helical peptides can aggregate spontaneously and form functional channels. This process can be described conceptually by a three-step thermodynamic cycle: 1 - folding of helices at the water-membrane interface, 2 - helix insertion into the lipid bilayer and 3 - specific interactions of these helices that result in functional tertiary structures. Although a crucial step, helix insertion has not been adequately studied because of the insolubility and aggregation of hydrophobic peptides. In this work, we use computer simulation methods (Molecular Dynamics) to characterize the energetics of helix insertion and we discuss its importance in an evolutionary context. Specifically, helices could self-assemble only if their interactions were sufficiently strong to compensate the unfavorable Free Energy of insertion of individual helices into membranes, providing a selection mechanism for protobiological evolution.

Rodriquez-Gomez, D.↗
NASA NTRSDate not supplied

To Cage or Not to Cage Seagrass; Is There Even a Question?

To Cage or Not to Cage Seagrass; Is There Even a Question? Loraé T. Simpson1, Morgan K. Gilligan1, Douglas M. Scheidt2 1Florida Oceanographic Society, Stuart, FL; 2Herndon Solutions Group/NEMCON, Kennedy Space Center, FL Contact email: lsimpson@floridaocean.org Diminished water quality has led to the decline of seagrasses and their associated ecosystem services in the Banana River Lagoon (BRL), resulting in increased restoration initiatives. Restoration success may be hindered by herbivory and the addition of herbivore exclusion devices may limit grazing stress on newly established seagrasses. These structures may alter sediment dynamics, influencing seagrass productivity. To test whether herbivore exclusion devices impact restoration success and sediment dynamics, we caged half of our seagrass restoration plots in the BRL. Treatments were monitored monthly for seagrass growth, and at three months for porewater nutrients, sediment bulk density, and carbon to nitrogen ratio. On average, caged plots had 87% more seagrass cover and 81% taller blades than control plots, highlighting the importance of caging newly transplanted seagrasses. There was no significant difference in porewater or sediment characteristics between treatments, suggesting that pedogensis and nutrient cycling need extended monitoring to capture changes in temporal scales.

Indian River Lagoon↗
NASA NTRSDate not supplied

To Cage or Not to Cage Seagrass; Is There Even a Question?

Diminished water quality has led to the decline of seagrasses and their associated ecosystem services in the Banana River Lagoon (BRL), resulting in increased restoration initiatives. Restoration success may be hindered by herbivory and the addition of herbivore exclusion devices may limit grazing stress on newly established seagrasses. These structures may alter sediment dynamics, influencing seagrass productivity. To test whether herbivore exclusion devices impact restoration success and sediment dynamics, we caged half of our seagrass restoration plots in the BRL. Treatments were monitored monthly for seagrass growth, and at three months for porewater nutrients, sediment bulk density, and carbon to nitrogen ratio. On average, caged plots had 87% more seagrass cover and 81% taller blades than control plots, highlighting the importance of caging newly transplanted seagrasses. There was no significant difference in porewater or sediment characteristics between treatments, suggesting that pedogensis and nutrient cycling need extended monitoring to capture changes in temporal scales.

Indian River Lagoon↗
NASA NTRS1977

The effect of moisture on the dynamic thermomechanical properties of a graphite/epoxy composite

A study has been made of the effect of moisture absorption on the dynamic thermomechanical properties of a graphite/epoxy composite recently considered for building primary aircraft structures. Torsional braid analysis (TBA) and thermomechanical analysis (TMA) techniques were used to measure changes in the glass transition temperature (Tg) and the initial softening temperature (heat distortion temperature, HDT) of T-300/5209 graphite/epoxy composites exposed to room temperature water soak.

Sykes, G. F.↗
NASA NTRS1983

Space Shuttle solid rocket booster initial water impact loads and dynamics - Analysis, tests, and flight experience

A series of scale model tests, finite element dynamic response analyses and full scale segment tests have been performed for purposes of developing design criteria for the initial water impact loading conditions applied to the internal stiffener rings located in the aft skirt portion of the Space Shuttle Solid Rocket Booster (SRB). In addition, flight experience has yielded information relative to structural reinforcement requirements. This paper discusses the test and analysis methods and summarizes significant results. It is noted that, although scale model test data are valuable for identifying trends, they have shortcomings concerning definition of full scale design loads criteria. Also, the frequently used static equivalent loads definition approach is not applicable for this type impact loading condition applied to an aft skirt type structure. Various types of ring structural fixes, including the addition of selected types of foam, are presented as well as associated full scale segment test results. Depending on the type and contour shape of the foam, reductions on applied pressures and peak measured strains over 50 percent are noted.

Kross, D. A.↗
NASA NTRS1988

Control of the induced microgravity environment of the Man Tended Free Flyer (MTFF)

Induced disturbance sources have been identified on board the Man Tended Free Flyer (MTFF). Vibration responses at sensitive payload/spacecraft interfaces have been predicted by the application of an empirically found spacecraft dynamic transfer function. Vibrations from fluid loops (Freon, water) and of reaction wheels are assessed to be the main contributors to the induced microgravity environment. The expected payload acceleration response amplitudes presented here are more than one hundred times higher than the admissible values given by the MTFF system requirement, not considering the structural striction-friction effects which could be avoided by appropriate design. Real responses will be significantly lower because the derivation of excitation and transmission functions are based on worst case assumptions. The results indicate that future activities must be concentrated on equipment design improvement and the implementation of vibration reduction along the disturbance transmission path. The activities must be accompanied by early equipment and assembly development tests and transmissibility measurements with the integrated spacecraft engineering and structural models in order to improve the accuracy of payload response predictions.

Schlund, Juergen↗
NASA NTRS1991

A surface-based cloud observing system

The paper describes a surface-based system, called the Cloud Observing System (COS), that was developed for measurements of the dynamical and thermodynamical properties of clouds and of their interaction with the large-scale environment, by combining several remote sensors and in situ systems. The atmospheric parameters that will be measured by COS include precipitation, the velocity and direction of wind, the cloud liquid water, the low-level winds and turbulence structure, integrated liquid and vapor quantities, the temperature and water profiles, the cloud radiance and the cloud base temperature, irradiances at the surface, the low-level temperature profile, the cloud-base height, and the cloud fraction; video cameras will provide visual records of clouds.

Albrecht, B. A.↗
NASA NTRS2007

Simulating Space Capsule Water Landing with Explicit Finite Element Method

A study of using an explicit nonlinear dynamic finite element code for simulating the water landing of a space capsule was performed. The finite element model contains Lagrangian shell elements for the space capsule and Eulerian solid elements for the water and air. An Arbitrary Lagrangian Eulerian (ALE) solver and a penalty coupling method were used for predicting the fluid and structure interaction forces. The space capsule was first assumed to be rigid, so the numerical results could be correlated with closed form solutions. The water and air meshes were continuously refined until the solution was converged. The converged maximum deceleration predicted is bounded by the classical von Karman and Wagner solutions and is considered to be an adequate solution. The refined water and air meshes were then used in the models for simulating the water landing of a capsule model that has a flexible bottom. For small pitch angle cases, the maximum deceleration from the flexible capsule model was found to be significantly greater than the maximum deceleration obtained from the corresponding rigid model. For large pitch angle cases, the difference between the maximum deceleration of the flexible model and that of its corresponding rigid model is smaller. Test data of Apollo space capsules with a flexible heat shield qualitatively support the findings presented in this paper.

Wang, John T.↗