Search NASA⌕ Search

SEARCH · Search NASA

Results for “wind speed estimates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

On the relationship of radar backscatter to wind speed and fetch

The physics of the interaction of electromagnetic waves with the ocean surface has been an active area of research for a number of years. This paper contains the results of satellite and aircraft experiments to investigate the ability of active microwave radars to infer surface wind speeds remotely. Data obtained from the recent National Aeronautics and Space Administration (NASA) Skylab experiment are compared with surface wind speeds measured by low-flying aircraft and ships-of-opportunity and found to give useful estimates of the ocean wind field. Also investigated was the influence of varying wave height on radar measurements of wind speed by measuring the backscattering cross-section for constant wind speed but variable wave conditions. It is found that this effect is of little importance.

Ross, D.↗

Retrieval of a wind profile from the Galileo Probe telemetry signal

The zonal wind speed profile within Jupiter's upper troposphere is to be estimated on the basis of its influence on the frequency of the Galileo Probe's telemetry signal; this is achieved by linearizing the relativistic Doppler shift equation about a state of zero wind speed, expanding the zonal wind series in a Legendre polynomial series, and reducing the resulting equations to a linear, least-squares problem. If the error sources have magnitudes not greater than those presently assumed, the retrieved wind speed profiles can place a key constraint on the basic drive for the atmospheric circulation, as well as anchoring winds derived from Galileo Orbiter images to well-defined vertical positions in the atmosphere.

Pollack, James B.↗

Sensitivity of Global Sea-Air CO2 Flux to Gas Transfer Algorithms, Climatological Wind Speeds, and Variability of Sea Surface Temperature and Salinity

Sensitivity analyses of sea-air CO2 flux to gas transfer algorithms, climatological wind speeds, sea surface temperatures (SST) and salinity (SSS) were conducted for the global oceans and selected regional domains. Large uncertainties in the global sea-air flux estimates are identified due to different gas transfer algorithms, global climatological wind speeds, and seasonal SST and SSS data. The global sea-air flux ranges from -0.57 to -2.27 Gt/yr, depending on the combination of gas transfer algorithms and global climatological wind speeds used. Different combinations of SST and SSS global fields resulted in changes as large as 35% on the oceans global sea-air flux. An error as small as plus or minus 0.2 in SSS translates into a plus or minus 43% deviation on the mean global CO2 flux. This result emphasizes the need for highly accurate satellite SSS observations for the development of remote sensing sea-air flux algorithms.

McClain, Charles R.↗

A comparison of low-cloud satellite wind estimates with analyses based on aircraft observations in a disturbed tropical regime

Low-level, ATS-3 satellite wind estimates are compared with values of wind direction and speed interpolated from analyses based on research aircraft observations of a synoptic tropical wave of moderate intensity on 26 July 1969 during BOMEX. The data were stratified according to whether a satellite estimate was positioned in one of three regions; namely, east or west of the wave trough or north of the disturbance center. When cloud and analysis vector magnitude deviations were computed, regional differences became apparent. These differences are attributed to the physical behavior of the cloud targets tracked under the influence of the surrounding large-scale environment.

Smith, C. L.↗

The influence of velocity variability on the determination of wind profiles

High sensitivity radars allow the determination of velocity estimates at time resolutions down to one minute or better. Because of the variability introduced to the mean wind due to turbulence and waves, the high resolution profiles may not be too useful for forecasting applications, although they yield the most realistic estimate of the instantaneous wind profile. Profiles of wind speed and direction, vertical velocity and echo power, which were deduced in real-time on 23 August 1981 with the spaced antenna drift mode of the SOUSY-VHF-Radar are shown. Whereas these profiles were measured within 1 minute, the operating routine allowed the selection of variable (longer) measuring periods, and one has to search for the optimum duration of the data averaging period. A high time resolution wind vector diagram is given which gives an idea of the temporal variability. The data were obtained with the spaced antenna technique, which allows a good estimate of the horizontal wind without having to correct for the vertical velocity component. The wind vectors specifically indicate a quasi-periodic variation in direction. This is assumed to be due to gravity waves since the vertical velocity also shows periodical variations with the same period. The consistency of these spaced-antenna VHF radar results along with the radiosonde data convinced researchers that the method is quite suitable for wind profiling applications.

Rottger, J.↗

Basic properties of developed wind waves and their influence on microwave remote sensing signatures

Error trends in wind speed measurements by satellite scatterometer altimeter and microwave radiometer are shown to be correlated with the degree of wave development. These errors are analyzed theoretically by studying the rms wave slope which, directly or indirectly, affects all microwave signatures. For equilibrium sea state, the influence of spectrum parameters on the wave slope is reviewed. In well-developed seas, the dominant wavelength is shown to have no effect on the slope. Temporal-spatial rates of steep and breaking waves are derived and compared with field observations. The inner scale that determines a rapid falloff of spectral density function at high frequencies is estimated. The dependence of the spectral parameters on wind speed and sea maturity is studied using NOAA buoy observations. It is concluded that the removal of environmental error trends from satellite measurements can be best accomplished by a joint processing of microwave returns from several independent instruments.

Glazman, Roman E.↗

Validation of ERS-1 environmental data products

Evaluation of the launch-version algorithms used by the European Space Agency (ESA) to derive wind field and ocean wave estimates from measurements of sensors aboard the European Remote Sensing satellite, ERS-1, has been accomplished through comparison of the derived parameters with coincident measurements made by 24 open ocean buoys maintained by the National Oceanic and Atmospheric Administration). During the period from November 1, 1991 through February 28, 1992, data bases with 577 and 485 pairs of coincident sensor/buoy wind and wave measurements were collected for the Active Microwave Instrument (AMI) and Radar Altimeter (RA) respectively. Based on these data, algorithm retrieval accuracy is estimated to be plus or minus 4 m/s for AMI wind speed, plus or minus 3 m/s for RA wind speed and plus or minus 0.6 m for RA wave height. After removing 180 degree ambiguity errors, the AMI wind direction retrieval accuracy was estimated at plus or minus 28 degrees. All of the ERS-1 wind and wave retrievals are relatively unbiased. These results should be viewed as interim since improved algorithms are under development. As final versions are implemented, additional assessments should be conducted to complete the validation.

Goodberlet, Mark A.↗

Urban air pollution dispersion model

Three-dimensional integrated puff model simulates smoke plume dispersion processes and estimates pollutant concentration during periods of low wind speed. Applications for model are given.

Robert, J. J.↗

Atmospheric density variations related to internal gravity waves

Report describes method for estimating gravity-wave density variation from wind speed profile between 60 and 100 km. Single profile is inadequate for valid determination of mean or background values and ensemble averaging over several related profiles is recommended.

Miller, E. B.↗

Gulf stream ground truth project - Results of the NRL airborne sensors

Results of an airborne study of the waves in the Gulf Stream are presented. These results show that the active microwave sensors (high-flight radar and wind-wave radar) provide consistent and accurate estimates of significant wave height and surface wind speed, respectively. The correlation between the wave height measurements of the high-flight radar and a laser profilometer is excellent.

Mcclain, C. R.↗

Studies of Jupiter's lower ionospheric layers

Fluxes of heavy ions necessary to form layers of enhanced ionization observed in the lower ionosphere of Jupiter are theoretically calculated, and possible formation mechanisms of the layers are investigated. Estimates of ion drift velocities and neutral wind speeds are made from the shape of the ionization layers, and are found to range from a few centimeters per second to meters per second. Zonal wind shear ranges from 50 m/s westward to 200 m/s eastward over a 70 km altitude range, while small meridional winds are sufficient to form the layer. Results indicate that if the layers are formed from sodium or sulfur ions from the Galilean satellite which are injected into the Jovian atmosphere, then the Na(+) flux must be 30,000 sq cm/s, and the S(+) flux must be 4000 sq cm/s in order to correlate with Pioneer 10 observations of the L(6) layer. At low altitudes of the L(6) and L(7) layers, the denser atmosphere makes diffusion very slow, and the vertical drift velocity of 1 cm/s requires a zonal wind of only several centimeters per second to drive it.

Chen, R. H.↗

Estimating the Effects of Sensor Spacing on Peak Wind Measurements at Launch Complex 39

This paper presents results of an empirical study to estimate the measurement error in the peak wind speed at Shuttle Launch Complex 39 (LC-39) which results from the measurement being made by sensors 1,300 feet away. Quality controlled data taken at a height of 30 feet from an array of sensors at the Shuttle Landing Facility (SLF) were used to model differences of peak winds as a function of separation distance and time interval. The SLF data covered wind speeds from less than ten to more than 25 knots. Winds measured at the standard LC-39 site at the normal height of 60 feet were used to verify the applicability of the model to the LC-39 situation. The error in the peak wind speed resulting from separation of the sensor from the target site obeys a power law as a function of separation distance and varies linearly with mean wind speed. At large separation distances, the error becomes a constant fraction of the mean wind speed as the separation function reaches an asymptotic value. The asymptotic average of the mean of the absolute difference in the peak wind speed between the two locations is about twelve percent of the mean wind speed. The distribution of the normalized absolute differences is half-Gaussian.

Merceret, Francis J.↗

Characterization of the land surface freeze/thaw state with SMAP-Reflectometry (SMAP-R)

The use of the Soil Moisture Active Passive (SMAP) radar in received mode has allowed for a new dataset of Global Navigation Satellite System – Reflectometry (GNSS-R) measurements. GNSS-R techniques have been used for more than two decades and have proven successful perform altimetry studies and to retrieve ocean wind speed and soil moisture, monitor wetland dynamics, estimate snow depth, detect sea ice and determine sea ice types. In this paper, the SMAP-Reflectometry measurements are used to classify freeze/thaw (F/T) state over Alaska, studying the differences in the SNR signal at both V and H polarizations.

Podest, Erika↗

Estimating ocean-air heat fluxes during cold air outbreaks by satellite

Nomograms of mean column heating due to surface sensible and latent heat fluxes were developed. Mean sensible heating of the cloud free region is related to the cloud free path (CFP, the distance from the shore to the first cloud formation) and the difference between land air and sea surface temperatures, theta sub 1 and theta sub 0, respectively. Mean latent heating is related to the CFP and the difference between land air and sea surface humidities q sub 1 and q sub 0 respectively. Results are also applicable to any path within the cloud free region. Corresponding heat fluxes may be obtained by multiplying the mean heating by the mean wind speed in the boundary layer. The sensible heating estimated by the present method is found to be in good agreement with that computed from the bulk transfer formula. The sensitivity of the solutions to the variations in the initial coastal soundings and large scale subsidence is also investigated. The results are not sensitive to divergence but are affected by the initial lapse rate of potential temperature; the greater the stability, the smaller the heating, other things being equal. Unless one knows the lapse rate at the shore, this requires another independent measurement. For this purpose the downwind slope of the square of the boundary layer height is used, the mean value of which is also directly proportional to the mean sensible heating. The height of the boundary layer should be measurable by future spaceborn lidar systems.

Chou, S. H.↗

Synergy of Satellite Radiation, Precipitation, and Other Meteorological Variable Observations for Global Mean Sea Surface Turbulent Heat Flux Estimation

Sea surface turbulent heat flux is one of the key components in global freshwater and energy balances and plays an important role in atmospheric dynamics, thermodynamics and general circulation. This turbulent heat flux is dominantly decided by sea surface latent heat release with some contribution from sensible heat exchange. The flux and its anomaly could significantly affect ocean heat storage and ocean circulation. They are part of and have great impacts on climate variability. Though the turbulent heat flux is extremely important for the climate and weather systems, only very limited ship and buoy observations of the flux are available over open oceans. There are no global, operational, direct measurements of this crucial meteorological variable. Global estimates are, basically, indirectly calculated from bulk turbulent flux parameterization with a combination of satellite column water vapor, sea surface water temperature, and wind speed observations. Critical parameters such as sea surface air temperature and humidity are estimated from empirical relations of theses variables with the water vapor and sea surface water temperature, respectively. Lacking accurate knowledge on surface air temperature and humidity, uncertainties in the parameterization and potential changes in the non-linear turbulent processes with long-term climate variations could cause large errors in estimated long-term turbulent fluxes from the indirect method as shown in current global sea surface turbulent flux datasets. This study uses synergized data of satellite global radiation, precipitation, and other meteorological variable observations to estimate sea surface turbulent heat fluxes. The radiation observations are made by the satellite Clouds and the Earth’s Radiant Energy System (CERES) sensors, while the global precipitation data is from NASA’s satellite Global Precipitation Climatology Project (GPCP). Other data includes satellite sea surface water temperature and wind speed observations. These datasets are obtained from a wide range of space sensors from passive to active instruments and from visible and near infrared to thermal infrared and microwave spectral sounders. One significant feature of these datasets is that they have multi-decades long climate records. Top-of-atmosphere (TOA) radiation and its anomaly represents the net heat energy input to the climate system, and the oceanic precipitation and ocean-land moisture transport can be used to quantify sea surface latent heat release. Based on the synergized datasets and the principle of global water and energy balances, global mean turbulent heat fluxes are estimated. The turbulent heat anomalies for the first two decades of the 21st century are, then, obtained mainly from global CERES radiation and GPCP precipitation anomalies, along with CERES derived ocean-land heat transports. Analysis indicates that the uncertainties in the estimated turbulent flux anomalies may be reduced considerably. The results suggest a strong needs in synchronized and synergized observations of atmospheric radiation, precipitation, and oceanic meteorological variables for long-term climate studies.

Bing Lin↗

Nationwide assessment of potential output from wind-powered generators

A method for computing the actual expected power for a wind-powered generator from a given observed speed distribution is described and applied to estimate the potential output for different locations in the continental U.S. A contour map of generator capacity factor values (fraction of the rated output realizable) is obtained for wind-powered generator systems with a cut-in speed of 3.6 m/sec and a rated speed of 8.0 m/sec, and for a unit with hypothetical values for the 1 MW class (cut-in speed, 6.7 m/sec; rated speed, 13.4 m/sec). Results indicate that in the central U.S. and in certain areas of the New England coast at a height of 61 m, over 60% of the rated output power could be obtained on an annual average. In these areas capacity factors of over 20% could be obtained with the 1MW system.

Justus, C. G.↗

Long-Term Evolution of the Aerosol Debris Cloud Produced by the 2009 Impact on Jupiter

We present a study of the long-term evolution of the cloud of aerosols produced in the atmosphere of Jupiter by the impact of an object on 19 July 2009. The work is based on images obtained during 5 months from the impact to 31 December 2009 taken in visible continuum wavelengths and from 20 July 2009 to 28 May 2010 taken in near-infrared deep hydrogen-methane absorption bands at 2.1-2.3 micron. The impact cloud expanded zonally from approximately 5000 km (July 19) to 225,000 km (29 October, about 180 deg in longitude), remaining meridionally localized within a latitude band from 53.5 deg S to 61.5 deg S planetographic latitude. During the first two months after its formation the site showed heterogeneous structure with 500-1000 km sized embedded spots. Later the reflectivity of the debris field became more homogeneous due to clump mergers. The cloud was mainly dispersed in longitude by the dominant zonal winds and their meridional shear, during the initial stages, localized motions may have been induced by thermal perturbation caused by the impact's energy deposition. The tracking of individual spots within the impact cloud shows that the westward jet at 56.5 deg S latitude increases its eastward velocity with altitude above the tropopause by 5- 10 m/s. The corresponding vertical wind shear is low, about 1 m/s per scale height in agreement with previous thermal wind estimations. We found evidence for discrete localized meridional motions with speeds of 1-2 m/s. Two numerical models are used to simulate the observed cloud dispersion. One is a pure advection of the aerosols by the winds and their shears. The other uses the EPIC code, a nonlinear calculation of the evolution of the potential vorticity field generated by a heat pulse that simulates the impact. Both models reproduce the observed global structure of the cloud and the dominant zonal dispersion of the aerosols, but not the details of the cloud morphology. The reflectivity of the impact cloud decreased exponentially with a characteristic timescale of 15 days; we can explain this behavior with a radiative transfer model of the cloud optical depth coupled to an advection model of the cloud dispersion by the wind shears. The expected sedimentation time in the stratosphere (altitude levels 5-100 mbar) for the small aerosol particles forming the cloud is 45-200 days, thus aerosols were removed vertically over the long term following their zonal dispersion. No evidence of the cloud was detected 10 months after the impact.

Sanchez-Lavega, A.↗

Estimation of divergence and vorticity using multidimensional smoothing splines

Laplacian smoothing splines, smoothing splines on the sphere, and smoothing pseudo splines on the sphere are presented. The method of generalized cross validation to choose the smoothing parameter is described. These methods are applied to estimate divergence and vorticity of the atmosphere from wind speed and wind direction.

Wendelberger, J. G.↗