Search NASA⌕ Search

SEARCH · Search NASA

Results for “Additive decomposition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Nonstoichiometry, point defects and magnetic properties in Sr{sub 2}FeMoO{sub 6-{delta}} double perovskites

The phase stability, nonstoichiometry and point defect chemistry of polycrystalline Sr{sub 2}FeMoO{sub 6-{delta}} (SFMO) was studied by thermogravimety at 1000, 1100, and 1200 Degree-Sign C. Single-phase SFMO exists between -10.2{<=}log pO{sub 2}{<=}-13.7 at 1200 Degree-Sign C. At lower oxygen partial pressure a mass loss signals reductive decomposition. At higher pO{sub 2} a mass gain indicates oxidative decomposition into SrMoO{sub 4} and SrFeO{sub 3-x}. The nonstoichiometry {delta} at 1000, 1100, and 1200 Degree-Sign C was determined as function of pO{sub 2}. SFMO is almost stoichiometric at the upper phase boundary (e.g. {delta}=0.006 at 1200 Degree-Sign C and log pO{sub 2}=-10.2) and becomes more defective with decreasing oxygen partial pressure (e.g. {delta}=0.085 at 1200 Degree-Sign C and log pO{sub 2}=-13.5). Oxygen vacancies are shown to represent majority defects. From the temperature dependence of the oxygen vacancy concentration the defect formation enthalpy was estimated ({Delta}H{sub OV}=253{+-}8 kJ/mol). Samples of different nonstoichiometry {delta} were prepared by quenching from 1200 Degree-Sign C at various pO{sub 2}. An increase of the unit cell volume with increasing defect concentration {delta} was found. The saturation magnetization is reduced with increasing nonstoichiometry {delta}. This demonstrates that in addition to Fe/Mo site disorder, oxygen nonstoichiometry is another source of reduced magnetization values. - Graphical abstract: Nonstoichiometry {delta} of Sr{sub 2}FeMoO{sub 6-{delta}} as function of oxygen partial pressure at 1000, 1100, and 1200 Degree-Sign C. Highlights: Black-Right-Pointing-Pointer Sr{sub 2}FeMoO{sub 6-{delta}} is stable at T=1200 Degree-Sign C at low pO{sub 2} only. Black-Right-Pointing-Pointer Nonstoichiometry {delta} measured at 1200, 1100, and 1000 Degree-Sign C. Black-Right-Pointing-Pointer Increase of oxygen vacancy concentration with lower pO{sub 2}. Black-Right-Pointing-Pointer Reduction of magnetization with increasing nonstoichiometry {delta}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A generalized anisotropic deformation formulation for geomaterials

In this paper, the Combined Finite-Discrete Element Method (FDEM) has been applied to analyze the deformation of anisotropic geomaterials. In the most general case geomaterials are both nonhomogeneous and non-isotropic. With the aim of addressing anisotropic material problems, improved 2D FDEM formulations have been developed. These formulations feature the unified hypo-hyper elastic approach combined with a multiplicative decomposition-based selective integration for volumetric and shear deformation modes. This approach is significantly different from the co-rotational formulations typically encountered in finite element codes. Unlike the corotational formulation, the multiplicative decomposition-based formulation naturally decomposes deformation into translation, rotation, plastic stretches, elastic stretches, volumetric stretches, shear stretches, etc. This approach can be implemented for a whole family of finite elements from solids to shells and membranes. This novel 2D FDEM based material formulation was designed in such a way that the anisotropic properties of the solid can be specified in a cell by cell basis, therefore enabling the user to seed these anisotropic properties following any type of spatial variation, for example, following a curvilinear path. In addition, due to the selective integration, there are no problems with volumetric or shear locking with any type of finite element employed.

58 GEOSCIENCES↗

Targeted electrochemical reduction of carcinogenic N -nitrosamines from emission control systems within CO 2 capture plants

N-Nitrosamines are one of the environmentally significant byproducts from aqueous amine-based post-combustion carbon capture systems (CCS) due to their potential risk to human health. Safely mitigating nitrosamines before they are emitted from these CO 2 capture systems is therefore a key concern before widescale deployment of CCS can be used to address worldwide decarbonization goals. Electrochemical decomposition is one viable route to neutralize these harmful compounds. The circulating emission control waterwash system, commonly installed at the end of the flue gas treatment trains to minimize amine solvent emissions, plays an important role to capture N-nitrosamines and control their emission into the environment. The waterwash solution is the last point where these compounds can be properly neutralized before becoming an environmental hazard. In this study, the decomposition mechanisms of N-nitrosamines in a simulated CCS waterwash with residual alkanolamines was investigated using several laboratory-scale electrolyzers utilizing carbon xerogel (CX) electrodes. Hcell experiments revealed that N-nitrosamines were decomposed through a reduction reaction and are converted into their corresponding secondary amines thereby neutralizing their environmental impact. Batch-cell experiments statistically examined the kinetic models of N-nitrosamine removal by a combined adsorption and decomposition processes. The cathodic reduction of the N-nitrosamines statistically obeyed the first-order reaction model. Finally, a prototype flow-through reactor using an authentic waterwash was used to successfully target and decompose N-nitrosamines to below the detectable level without degrading the amine solvent compounds allowing them to be return to the CCS and lower the system operating costs. Furthermore, the developed electrolyzer was able to efficiently remove greater than 98% of N-nitrosamines from the waterwash solution without producing any additional environmentally harmful compounds and offers an effective and safe route to mitigate these compounds from CO 2 capture systems.

20 FOSSIL-FUELED POWER PLANTS↗

THE PLUTO CODE FOR ADAPTIVE MESH COMPUTATIONS IN ASTROPHYSICAL FLUID DYNAMICS

We present a description of the adaptive mesh refinement (AMR) implementation of the PLUTO code for solving the equations of classical and special relativistic magnetohydrodynamics (MHD and RMHD). The current release exploits, in addition to the static grid version of the code, the distributed infrastructure of the CHOMBO library for multidimensional parallel computations over block-structured, adaptively refined grids. We employ a conservative finite-volume approach where primary flow quantities are discretized at the cell center in a dimensionally unsplit fashion using the Corner Transport Upwind method. Time stepping relies on a characteristic tracing step where piecewise parabolic method, weighted essentially non-oscillatory, or slope-limited linear interpolation schemes can be handily adopted. A characteristic decomposition-free version of the scheme is also illustrated. The solenoidal condition of the magnetic field is enforced by augmenting the equations with a generalized Lagrange multiplier providing propagation and damping of divergence errors through a mixed hyperbolic/parabolic explicit cleaning step. Among the novel features, we describe an extension of the scheme to include non-ideal dissipative processes, such as viscosity, resistivity, and anisotropic thermal conduction without operator splitting. Finally, we illustrate an efficient treatment of point-local, potentially stiff source terms over hierarchical nested grids by taking advantage of the adaptivity in time. Several multidimensional benchmarks and applications to problems of astrophysical relevance assess the potentiality of the AMR version of PLUTO in resolving flow features separated by large spatial and temporal disparities.

79 ASTRONOMY AND ASTROPHYSICS↗

Monolithic catalyst beds for hydrazine reactors

A monolithic catalyst bed for monopropellant hydrazine decomposition was evaluated. The program involved the evaluation of a new hydrazine catalyst concept wherein open-celled foamed materials are used as supports for the active catalysts. A high-surface-area material is deposited upon the open-celled foamed material and is then coated with an active metal to provide a spontaneous catalyst. Only a fraction of the amount of expensive active metal in currently available catalysts is needed to promote monolithic catalyst. Numerous parameters were evaluated during the program, and the importance of additional parameters became obvious only while the program was in progress. A demonstration firing (using a 2.2-Newton (N)(0.5-lbf) reactor) successfully accumulated 7,700 seconds of firing time and 16 ambient temperature starts without degradation. Based on the excellent results obtained throughout the program and the demonstrated life capability of the monolithic foam, it is recommended that additional studies be conducted to further exploit the advantages of this concept.

Source record↗

On obtaining the forward phase functions of Saturn ring features from radio occultation observations

It is noted that the near-forward scattering functions of particles in Saturn ring features are related to 3.6 cm radio occultation power spectra by a Fredholm integral equation of the first kind. The equation reduces to an algebraic system of equation whose solution by usual inversion techniques (that is, least mean squares) is ruled out by the near singularity of the forward transformation matrix. A combination of constrained linear inversion and a filtering algorithm based on eigenvector decomposition of the matrix reduces the instabilities; this yields derived phase functions valid over the range of zero to about 12 mrad. It is noted that these functions represent the collective forward diffraction lobe of particles greater than about 1 m in radius. Since multiple scattering of the signal is a significant effect, the measured phase functions must be adjusted to obtain the singly scattered component. This single-scattering correction is examined for two physical models, namely the monolayer and the classical discrete random slab; in addition, the fraction of opacity in submeter particles for each model for particular ring features is estimated.

Zebker, H. A.↗

Gene-informed decomposition model predicts lower soil carbon loss due to persistent microbial adaptation to warming

Abstract Soil microbial respiration is an important source of uncertainty in projecting future climate and carbon (C) cycle feedbacks. However, its feedbacks to climate warming and underlying microbial mechanisms are still poorly understood. Here we show that the temperature sensitivity of soil microbial respiration ( Q 10 ) in a temperate grassland ecosystem persistently decreases by 12.0 ± 3.7% across 7 years of warming. Also, the shifts of microbial communities play critical roles in regulating thermal adaptation of soil respiration. Incorporating microbial functional gene abundance data into a microbially-enabled ecosystem model significantly improves the modeling performance of soil microbial respiration by 5–19%, and reduces model parametric uncertainty by 55–71%. In addition, modeling analyses show that the microbial thermal adaptation can lead to considerably less heterotrophic respiration (11.6 ± 7.5%), and hence less soil C loss. If such microbially mediated dampening effects occur generally across different spatial and temporal scales, the potential positive feedback of soil microbial respiration in response to climate warming may be less than previously predicted.

54 ENVIRONMENTAL SCIENCES↗

Mechanochemistry of the LiBH 4 –AlCl 3 System: Structural Characterization of the Products by Solid-State NMR

The double-cation metal borohydride, Li 4 Al 3 (BH 4 ) 13 , mechanochemically produced from a 13:3 mixture of lithium borohydride (LiBH 4 ) and aluminum chloride (AlCl 3 ), has a low hydrogen desorption temperature; however, the material’s decomposition is accompanied by a large emission of toxic diborane (B 2 H 6 ). In this study, we found that a decrease of the LiBH 4 :AlCl 3 ratio in the starting mixture yields increased amounts of partially chlorinated products that also dehydrogenate at low temperature, but release negligibly small amounts of diborane. Extensive characterization by solid-state NMR spectroscopy (SSNMR) and powder X-ray diffraction (XRD) found that the 11:3 ratio product maintains the Li 4 Al 3 (BH 4 ) 13- like structure, with additional Cl – anions substituting for [BH 4 ] – compared to the 13:3 mixture. Further decrease of relative LiBH 4 concentration in the starting mixture to 9:3 results in a different product composed of tetrahedral [Al(BH 4 ) 4 ] - and [Al(BH 4 ) 2 Cl 2 ] - complexes, in which two hydrogen atoms of each borohydride group are bridged to aluminum sites. Additionally, SSNMR revealed the covalent character of the Al–H bonds, which is not observed in Li 4 Al 3 (BH 4 ) 13 . In conclusion, these findings suggest that the Al–Cl bonding present in the chlorinated complexes prevents the formation of Al(BH 4 ) 3 , which is a known intermediate leading to the formation of diborane during thermal dehydrogenation of the nearly chlorine-free Li 4 Al 3 (BH 4 ) 13 .

36 MATERIALS SCIENCE↗

Photooxidation and Photodesorption in the Photochemistry of Isobutene on TiO2(110)

The photochemistry of isobutene was examined on the rutile TiO2(110) surface as a function of the surface pretreatment condition and irradiation temperature using temperature programmed desorption (TPD) and photon stimulated desorption (PSD). Isobutene adsorbs molecularly on the clean TiO2(110) surface without detectable thermal decomposition. Preadsorption of oxygen, either as atoms or chemisorbed molecules, did not promote thermal reactions with isobutene, but instead blocked isobutene adsorption sites. Ultraviolet (UV) light irradiation of isobutene adsorbed on the clean surface led to depletion through photodesorption without significant photodecomposition. Isobutene PSD yields increased with increasing surface temperature suggesting that activated molecules sample their physisorbed potential energy surface during photodesorption. Preadsorption of oxygen promoted partial photooxidation of adsorbed isobutene to acetone, methacrolein and isobutanal. Acetone was only detected when molecular oxygen was present, indicating that O2 addition occurred across the C=C bond. In contrast, results from use of D6-isobutene indicated that coadsorption with either O adatoms or O2 molecules led to photochemical production of methacrolein (and likely isobutanal) through C-H bond cleavage on a methyl group. Irradiation an adlayer comprised of isobutene isolated from the surface by 1 ML of preadsorbed O2 showed the most photoconversion of isobutene, which suggests that photoactivation of adsorbed O2 is a key step in partial photooxidation of isobutene. Comparison of the isobutene PSD and oxidation product yields as a function of surface temperature between 20 and 120 K indicates a competition between photooxidation and photodesorption that varies with temperature. ‘Direct’ charge transfer events between isobutene and the surface, favored at higher temperature, compete with partial oxidation pathways initiated by ‘indirect’ activation of isobutene by O2, which is favored at low temperature. Access of O2 to the surface is critical to achieving desired isobutene photooxidation rates and products, and isobutene photodesorption may provide a means of regulating the isobutene surface coverage. Work reported here was supported by the U.S. Department of Energy, Office of Basic Energy Science, Division of Chemical Sciences, Geosciences, and Biosciences, and performed in the Williams R. Wiley Environmental Molecular Science Laboratory (EMSL), a Department of Energy user facility funded by the Office of Biological and Environmental Research. Pacific Northwest National Laboratory is a multiprogram national laboratory operated for the U.S. Department of Energy by the Battelle Memorial Institute under contract DEAC05-76RL01830.

Environmental Molecular Sciences Laboratory↗

The quasi-equilibrium framework revisited: analyzing long-term CO 2 enrichment responses in plant–soil models

Abstract. Elevated carbon dioxide ( CO 2 ) can increase plant growth, but themagnitude of this CO 2 fertilization effect is modified by soilnutrient availability. Predicting how nutrient availability affects plantresponses to elevated CO 2 is a key consideration for ecosystemmodels, and many modeling groups have moved to, or are moving towards,incorporating nutrient limitation in their models. The choice of assumptionsto represent nutrient cycling processes has a major impact on modelpredictions, but it can be difficult to attribute outcomes to specificassumptions in complex ecosystem simulation models. Here we revisit thequasi-equilibrium analytical framework introduced by Comins andMcMurtrie (1993) and explore the consequences of specific model assumptionsfor ecosystem net primary productivity (NPP). We review the literature applying this framework to plant–soilmodels and then analyze the effect of several new assumptions on predictedplant responses to elevated CO 2 . Examination of alternativeassumptions for plant nitrogen uptake showed that a linear function of themineral nitrogen pool or a linear function of the mineral nitrogen pool withan additional saturating function of root biomass yield similar CO 2 responses at longer timescales ( &gt;5 years), suggesting that the addedcomplexity may not be needed when these are the timescales of interest. Incontrast, a saturating function of the mineral nitrogen pool with lineardependency on root biomass yields no soil nutrient feedback on thevery-long-term ( &gt;500 years), near-equilibrium timescale, meaning that oneshould expect the model to predict a full CO 2 fertilization effecton production. Secondly, we show that incorporating a priming effect on slowsoil organic matter decomposition attenuates the nutrient feedback effect onproduction, leading to a strong medium-term (5–50 years) CO 2 response. Models incorporating this priming effect should thus predict astrong and persistent CO 2 fertilization effect over time. Thirdly,we demonstrate that using a “potential NPP” approach to represent nutrientlimitation of growth yields a relatively small CO 2 fertilizationeffect across all timescales. Overall, our results highlight thefact that the quasi-equilibriumanalytical framework is effective for evaluating both the consequences andmechanisms through which different model assumptions affect predictions. Tohelp constrain predictions of the future terrestrial carbon sink, werecommend the use of this framework to analyze likely outcomes of new modelassumptions before introducing them to complex model structures.

58 GEOSCIENCES↗

Particles of spilled oil-absorbing carbon in contact with water

Hydrogen generator coupled to or integrated with a fuel cell for portable power applications. Hydrogen is produced via thermocatalytic decomposition (cracking, pyrolysis) of hydrocarbon fuels in oxidant-free environment. The apparatus can utilize a variety of hydrocarbon fuels, including natural gas, propane, gasoline, kerosene, diesel fuel, crude oil (including sulfurous fuels). The hydrogen-rich gas produced is free of carbon oxides or other reactive impurities, so it could be directly fed to any type of a fuel cell. The catalysts for hydrogen production in the apparatus are carbon-based or metal-based materials and doped, if necessary, with a sulfur-capturing agent. Additionally disclosed are two novel processes for the production of two types of carbon filaments, and a novel filamentous carbon product. Carbon particles with surface filaments having a hydrophobic property of oil film absorption, compositions of matter containing those particles, and a system for using the carbon particles for cleaning oil spills.

08 HYDROGEN↗

Filamentous carbon particles for cleaning oil spills and method of production

A compact hydrogen generator is coupled to or integrated with a fuel cell for portable power applications. Hydrogen is produced via thermocatalytic decomposition (cracking, pyrolysis) of hydrocarbon fuels in oxidant-free environment. The apparatus can utilize a variety of hydrocarbon fuels, including natural gas, propane, gasoline, kerosene, diesel fuel, crude oil (including sulfurous fuels). The hydrogen-rich gas produced is free of carbon oxides or other reactive impurities, so it could be directly fed to any type of a fuel cell. The catalysts for hydrogen production in the apparatus are carbon-based or metal-based materials and doped, if necessary, with a sulfur-capturing agent. Additionally disclosed are two novel processes for the production of two types of carbon filaments, and a novel filamentous carbon product. The hydrogen generator can be conveniently integrated with high temperature fuel cells to produce an efficient and self-contained source of electrical power.

08 HYDROGEN↗

Non-destructive Quantitative Phase Analysis and Microstructural Characterization of Zirconium Coated U-10Mo Fuel Foils via Neutron Diffraction

This report uses neutron diffraction to investigate the crystal phase composition of uranium-molybdenum alloy foils (U-10Mo) for the CONVERT MP-1 Reactor Conversion Project, and determines the effect on alpha-uranium contamination following the deposition of a Zr metal diffusion layer by various methods: plasma spray deposition of Zr powders at LANL and hot co-rolling with Zr foils at BWXT. In summary, there is minimal decomposition of the gamma phase U-10Mo foil to alpha phase contamination following both plasma spraying and hot co-rolling. The average unit cell volume, i.e. lattice spacing, of the Zr layer can be mathematically extracted from the diffraction data; co-rolled Zr matches well with literature values of bulk Zr, while plasma sprayed Zr shows a slight increase in the lattice spacing, indicative of interstitial oxygen in the lattice. Neutron diffraction is a beneficial alternative to conventional methods of phase composition, i.e. x ray diffraction (XRD) and destructive metallography. XRD has minimal penetration depth in high atomic number materials, particularly uranium, and can only probe the first few microns of the fuel plate; neutrons pass completely through the foil, allowing for bulk analysis of the foil composition and no issues with addition of cladding layers, as in the final, aluminum-clad reactor fuel plates. Destructive metallography requires skilled technicians, cutting of the foil into small sections, hazardous etching conditions, long polishing and microscopy times, etc.; the neutron diffraction system has an automated sample loader and can fit larger foils, so there is minimal analysis preparation; the total spectrum acquisition time is ~ 1 hour per sample. The neutron diffraction results are limited by spectra refinement/calculation times and the availability of the neutron beam source. In the case of LANSCE at Los Alamos, the beam operates ~50% of the year. Following the lessons learned from these preliminary results, optimizations to the process and analysis can be made, and neutron diffraction can become a viable and efficient technique for gamma/alpha phase composition determination for nuclear fuels.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Final Technical Report to DOE for the Award DE-SC0004601

Understanding the responses, adaptations and feedback mechanisms of biological communities to climate change is critical to project future state of earth and climate systems. Although significant amount of knowledge is available on the feedback responses of aboveground communities to climate change, little is known about the responses of belowground microbial communities due to the challenges in analyzing soil microbial community structure. Thus the goal overall goal of this study is to provide system-level, predictive mechanistic understanding of the temperature sensitivity of soil carbon (C) decomposition to climate warming by using cutting-edge integrated metagenomic technologies. Towards this goal, the following four objectives will be pursued: (i) To determine phylogenetic composition and metabolic diversity of microbial communities in the temperate grassland and tundra ecosystems; (ii) To delineate the responses of microbial community structure, functions and activities to climate change in the temperate grassland and tundra ecosystems; (iii) To determine the temperature sensitivity of microbial respiration in soils with different mixtures of labile versus recalcitrant C, and the underlying microbiological basis for temperature sensitivity of these pools; and (iv) To synthesize all experimental data for revealing microbial control of ecosystem carbon processes in responses to climate change. We have achieved our goals for all four proposed objectives. First, we determined the phylogenetic composition and metabolic diversity of microbial communities in the temperate grassland and tundra ecosystems. For this objective, we have developed a novel phasing amplicon sequencing (PAS) approach for MiSeq sequencing of amplicons. This approach has been used for sequencing various phylogenetic and functional genes related to ecosystem functioning. A comprehensive functional gene array (e.g., GeoChip 5.0) has also been developed and used for soil microbial community analysis in this study. In addition, shot-gun metagenome sequencing along with the above approaches have been used to understand the phylogenetic and functional diversity, composition, and structure of soil microbial communities in both temperature grassland and tundra ecosystems. Second, we determined the response of soil microbial communities to climate warming in both temperate grassland and tundra ecosystems using various methods. Our major findings are: (i) Microorganisms are very rapid to respond to climate warming in the tundra ecosystem, AK, which is vulnerable, too. (ii) Climate warming also significantly shifted the metabolic diversity, composition and structure of microbial communities, and key metabolic pathways related to carbon turnover, such as cellulose degradation (~13%) and CO2 production (~10%), and to nitrogen cycling, including denitrification (~12%) were enriched by warming. (iii) Warming also altered the expression patterns of microbial functional genes important to ecosystem functioning and stability through GeoChip and metatranscriptomic analysis of soil microbial communities at the OK site. Third, we analyzed temperature sensitivity of C decomposition to climate warming for both AK and OK soils through laboratory incubations. Key results include: (i) Alaska tundra soils showed that after one year of incubation, CT in the top 15 cm could be as high as 25% and 15% of the initial soil C content at 25°C and 15°C incubations, respectively. (ii) analysis of 456 incubated soil samples with 16S rRNA gene, ITS and GeoChip hybridization showed that warming shifted the phylogenretic and functional diversity, composition, structure and metabolic potential of soil microbial communities, and at different stages of incubation, key populations and functional genes significantly changed along with soil substrate changes. Functional gene diversity and functional genes for degrading labile C components decrease along incubation when labile C components are exhausting, but the genes related to degrading recalcitrant C increase. These molecular data will be directly used for modeling. Fourth, we have developed novel approaches to integrate and model experimental data to understand microbial control of ecosystem C processes in response to climate change. We compared different methods to calculate Q10 for estimating temperature sensitivity, and new approaches for Q10 calculation and molecular ecological network analysis were also developed. Using those newly developed approaches, our result indicated that Q10s increased with the recalcitrance of C pools, suggesting that longer incubation studies are needed in order to assess the temperature sensitivity of slower C pools, especially at low temperature regimes. This project has been very productive, resulting in 42 papers published or in press, 4 submitted, and 13 in preparation.

54 ENVIRONMENTAL SCIENCES↗

Valorisation of waste tyre by pyrolysis in a moving bed reactor

The aim of this work is to assess the behaviour of a moving bed reactor, based on a screw transporter design, in waste tyre pyrolysis under several experimental conditions. Waste tyre represents a significant problem in developed countries and it is necessary to develop new technology that could easily process big amounts of this potentially raw material. In this work, the influence of the main pyrolysis process variables (temperature, solid residence time, mass flow rate and inert gas flow) has been studied by a thorough analysis of product yields and properties. It has been found that regardless the process operational parameters, a total waste tyre devolatilisation is achieved, producing a pyrolytic carbon black with a volatile matter content under 5 wt.%. In addition, it has been proven that, in the range studied, the most influencing process variables are temperature and solid mass flow rate, mainly because both variables modify the gas residence time inside the reactor. In addition, it has been found that the modification of these variables affects to the chemical properties of the products. This fact is mainly associated to the different cracking reaction of the primary pyrolysis products.

54 ENVIRONMENTAL SCIENCES↗

Deep eutectic solvent approach towards nickel/nickel nitride nanocomposites

Nickel nitride is an attractive material for a broad range of applications including catalysis. However preparations and especially those targeting nanoscale particles remain a major challenge. Herein, we report a wet-chemical approach to produce nickel/nickel nitride nanocomposites using deep eutectic solvents. A choline chloride/urea deep eutectic solvent was used as a reaction medium to form gels containing nickel acetate tetrahydrate. Heat treatment of the gel in inert atmosphere forms nanoparticles embedded within a nitrogen-doped carbon matrix. Thermogravimetric analysis (TGA) and differential thermal analysis (DTA) were used to understand the decomposition profile of the precursors and to select pyrolysis temperatures located in regions of thermal stability. X-ray diffraction (XRD) confirmed the presence of metallic nickel, whereas X-ray photoelectron spectroscopy (XPS) suggested the existence of a nickel nitride surface layer. According to transmission electron microscopy (TEM) analysis these mixed phase, possibly core-shell type nanoparticles, have very defined facets. Furthermore, these materials represent a unique opportunity to tune catalytic properties of nickel-based catalysts through control of their composition, surface structure, and morphology; in addition to employing potential benefits of a nitrogen-doped carbon support.

36 MATERIALS SCIENCE↗

Harmonizing solar induced fluorescence across spatial scales, instruments, and extraction methods using proximal and airborne remote sensing: A multi-scale study in a soybean field

Solar-induced chlorophyll fluorescence (SIF) has been widely used to track vegetation photosynthesis at different scales ranging from in-situ measurements to satellite products. Airborne platforms sample SIF data at a spatial scale intermediate between in-situ and satellite, matching that of ground measurement (e.g. flux tower footprints and other field sampling), enabling us to explore causes of SIF variation and validate satellite-based SIF products. However, harmonizing SIF across sensors and platforms (correcting for systematic errors to yield a consistent, comparable SIF product) is challenging because SIF can be retrieved in different absorption windows, with different instruments and methods complicating the comparison between different observational levels (i.e., ground, airborne, satellites) and between sites equipped with different instruments with varying optical properties (spectral resolution and sampling intervals, spatial resolution). Additionally, the spatial and temporal variability of atmospheric properties can influence the retrieval of the weak SIF signal. Because of these complications, direct comparisons of airborne and ground SIF across scales are rarely attempted. Here, in this study, we combined airborne SIF data with simultaneous ‘ground truth’ data collected by stationary and mobile platforms in a soybean field in Nebraska, USA. In this effort, we tested several SIF extraction methods, including Fraunhofer Line Discrimination (FLD), improved Fraunhofer Line Discrimination (iFLD), Spectral Fitting Method (SFM), SpecFit, and a Singular Vector Decomposition (SVD) method. The SpecFit method was sensitive to the 715–740 nm water bands and removing the water bands in the fitting process yielded better agreement between the airborne and ground SIF spectra. Accurate estimation of the ground level downwelling irradiance obtained by ground measurements over a calibration target improved agreement between airborne and ground SIF retrievals at the O 2 A band, and allowed us to derive a SIF dataset with improved agreement across platforms and sampling scales. This experimental approach provided a method for generating comparable SIF signals across instruments, methods and platforms, which is critical to understanding the SIF-GPP relationship at different scales and to cross-validate the diversity of platforms used for satellite products calibration and validation.

54 ENVIRONMENTAL SCIENCES↗

Thermal chemistry and photochemistry of hexafluoroacetone on rutile TiO2(110)

The ultraviolet (UV) photon-induced decomposition of hexafluoroacetone (HFA) adsorbed on the rutile TiO2(110) surface was investigated using photon stimulated desorption (PSD) and temperature programmed desorption (TPD). The initial 0.2 ML coverage of HFA decomposed when adsorbed on the reduced TiO2(110) surface resulting in the formation of trifluoroacetate (evolving in TPD as CO, CO2, and C2F4 near 600 K). Further HFA exposure resulted in molecular adsorption. No evidence for photochemistry was observed on the reduced surface. HFA adsorbed and desorbed molecularly on a pre-oxidized TiO2(110) surface with only a minor amount (~1%) of thermal decomposition in TPD. A new adsorption state at 350 K was assigned to the reversible formation of a photoactive HFA-diolate species [(CF3)2COO]. UV irradiation depleted the 350 K state and resulted in the formation of surface bound trifluoroacetate. PSD experiments showed that CF3, CO, and CO2 were evolved during irradiation at 95 K. Post-irradiation TPD showed evidence for trifluoroacetate (desorbing as CO, CO2, and C2F4 near 600 K) as surface-bound photodecomposition products. 18O isotope scrambling experiments showed that the origin of the ejected CO2 was from photodecomposition of the HFA-diolate species. CO photodesorption was due to an as-yet unidentified adsorbed HFA species and not due to decomposition of the HFA-diolate. These results are in contrast to the photochemical behavior of acetone, butanone and acetaldehyde on TiO2(110), where UV irradiation resulted in the gas phase ejection of one of the carbonyl substituent groups as well as a stoichiometric amount of carboxylate left on the surface. We conclude that fluorination alters the electronic structure of adsorbed carbonyls on TiO2(110) in such a way as to promote complete fragmentation of the adsorbed carbonyl complex to form gas phase CO2 as well as open up additional photodissociation pathways leading to CO production.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗