Search NASA⌕ Search

SEARCH · Search NASA

Results for “Band structure methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Conducting Jahn-Teller domain walls in undoped manganites

We investigate the electronic properties of multidomain configurations in models for undoped manganites by means of variational and Monte Carlo techniques. These materials display simultaneous Jahn-Teller distortions and magnetic ordering. We find that a band of electronic states appears associated with Jahn-Teller domain walls, and this band is localized in the direction perpendicular to the walls. The energy and width of this band depend on the conformational properties of the domain walls. At finite temperatures, the conductance along the domain walls, induced by the localized domain-wall bands, is orders magnitude larger than in the bulk.

36 MATERIALS SCIENCE↗

Optical conductivity of partially oxidized graphene from first principles

We investigate the geometry, electronic structure, and optical properties of partially oxidized graphene using density functional theory. Our calculations show that oxygen atoms are chemisorbed on graphene plane and distort carbon atoms vertically, with almost no change in the in-plane structure. The ground state configurations for different oxygen coverages ranging from 2% to 50% (O/C ratio) are calculated and show the strong tendency of oxygen adatoms to aggregate and form discrete islands on graphene plane. It is found that the opened band gap due to oxygen functionalization depends on the oxygen density and the adsorption configuration. The gap is not significant for oxygen densities lower than 8%. The optical conductivities are calculated in the infrared, visible, and ultraviolet regions and show different characteristic features depending on the degree of oxidation. These results imply that optical measurement techniques can be employed to monitor oxidation (or reduction) process as contact-free methods.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

PTV-based IMPT optimization incorporating planning risk volumes vs robust optimization

Purpose: Robust optimization leads to intensity-modulated proton therapy (IMPT) plans that are less sensitive to uncertainties and superior in terms of organs-at-risk (OARs) sparing, target dose coverage, and homogeneity compared to planning target volume (PTV)-based optimized plans. Robust optimization incorporates setup and range uncertainties, which implicitly adds margins to both targets and OARs and is also able to compensate for perturbations in dose distributions within targets and OARs caused by uncertainties. In contrast, the traditional PTV-based optimization considers only setup uncertainties and adds a margin only to targets but no margins to the OARs. It also ignores range uncertainty. The purpose of this work is to determine if robustly optimized plans are superior to PTV-based plans simply because the latter do not assign margins to OARs during optimization. Methods: The authors retrospectively selected from their institutional database five patients with head and neck (H and N) cancer and one with prostate cancer for this analysis. Using their original images and prescriptions, the authors created new IMPT plans using three methods: PTV-based optimization, optimization based on the PTV and planning risk volumes (PRVs) (i.e., 'PTV+PRV-based optimization'), and robust optimization using the 'worst-case' dose distribution. The PRVs were generated by uniformly expanding OARs by 3 mm for the H and N cases and 5 mm for the prostate case. The dose-volume histograms (DVHs) from the worst-case dose distributions were used to assess and compare plan quality. Families of DVHs for each uncertainty for all structures of interest were plotted along with the nominal DVHs. The width of the 'bands' of DVHs was used to quantify the plan sensitivity to uncertainty. Results: Compared with conventional PTV-based and PTV+PRV-based planning, robust optimization led to a smaller bandwidth for the targets in the face of uncertainties {l_brace}clinical target volume [CTV] bandwidth: 0.59 [robust], 3.53 [PTV+PRV], and 3.53 [PTV] Gy (RBE){r_brace}. It also resulted in higher doses to 95% of the CTV {l_brace}D{sub 95%}: 60.8 [robust] vs 59.3 [PTV+PRV] vs 59.6 [PTV] Gy (RBE){r_brace}, smaller D{sub 5%} (doses to 5% of the CTV) minus D{sub 95%} {l_brace}D{sub 5%}- D{sub 95%}: 13.2 [robust] vs 17.5 [PTV+PRV] vs 17.2 [PTV] Gy (RBE){r_brace}. At the same time, the robust optimization method irradiated OARs less {l_brace}maximum dose to 1 cm{sup 3} of the brainstem: 48.3 [robust] vs 48.8 [PTV+PRV] vs 51.2 [PTV] Gy (RBE); mean dose to the oral cavity: 22.3 [robust] vs 22.9 [PTV+PRV] vs 26.1 [PTV] Gy (RBE); maximum dose to 1% of the normal brain: 66.0 [robust] vs 68.0 [PTV+PRV] vs 69.3 [PTV] Gy (RBE){r_brace}. Conclusions: For H and N cases studied, OAR sparing in PTV+PRV-based optimization was inferior compared to robust optimization but was superior compared to PTV-based optimization; however, target dose robustness and homogeneity were comparable in the PTV+PRV-based and PTV-based optimizations. The same pattern held for the prostate case. The authors' data suggest that the superiority of robust optimization is not due simply to its inclusion of margins for OARs, but that this is due mainly to the ability of robust optimization to compensate for perturbations in dose distributions within target volumes and normal tissues caused by uncertainties.

60 APPLIED LIFE SCIENCES↗

Preconditioning bandgap eigenvalue problems in three-dimensional photonic crystals simulations

To explore band structures of three-dimensional photonic crystals numerically, we need to solve the eigenvalue problems derived from the governing Maxwell equations. The solutions of these eigenvalue problems cannot be computed effectively unless a suitable combination of eigenvalue solver and preconditioner is chosen. Taking eigenvalue problems due to Yee's scheme as examples, we propose using Krylov-Schur method and Jacobi-Davidson method to solve the resulting eigenvalue problems. For preconditioning, we derive several novel preconditioning schemes based on various preconditioners, including a preconditioner that can be solved by Fast Fourier Transform efficiently. We then conduct intensive numerical experiments for various combinations of eigenvalue solvers and preconditioning schemes. We find that the Krylov-Schur method associated with the Fast Fourier Transform based preconditioner is very efficient. It remarkably outperforms all other eigenvalue solvers with common preconditioners like Jacobi, Symmetric Successive Over Relaxation, and incomplete factorizations. This promising solver can benefit applications like photonic crystal structure optimization.

36 MATERIALS SCIENCE↗

Electrochemical Control of Magnetism on the Breathing Kagome Network of Li x ScMo 3 O 8

Controlling properties within a given functional inorganic material structure type is often accomplished through tuning the electronic occupation, which is in turn dictated by the elemental composition determined at the time of material preparation. We employ electrochemical control of the lithium content, with associated electronic occupancy control, to vary the magnetic properties of a material where a kagome-derived network of Mo 3 triangles carry the spin. In this case, Li is electrochemically inserted into LiScMo 3 O 8 , a layered compound containing a breathing Mo kagome network. Up to two additional Li can be inserted into LiScMo 3 O 8 , transforming it into Li 3 ScMo 3 O 8 . Li 2 ScMo 3 O 8 prepared by electrochemical lithiation is compared to the quantum spin liquid candidate compound Li 2 ScMo 3 O 8 prepared through high-temperature solid-state methods, which has a slightly different structural stacking sequence but a similar kagome-derived network. Magnetic measurements are supported by first-principles calculations, showing that electrons remain localized on the Mo clusters throughout the doping series. As x is varied in Li x ScMo 3 O 8 , the measurements and calculations reveal the evolution from a diamagnetic band insulator at x = 1 to a geometrically frustrated magnet at x = 2, back to a diamagnetic insulator at x = 3. These results indicate a likelihood of strong coupling between the degree of Li disorder and charge/magnetic ordering over the Mo 3 clusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A broadband absorption spectrometer using light emitting diodes for ultrasensitive, in situ trace gas detection

A broadband absorption spectrometer has been developed for highly sensitive and target-selective in situ trace gas measurements. The instrument employs two distinct modes of operation: (i) broadband cavity enhanced absorption spectroscopy (BBCEAS) is used to quantify the concentration of gases in sample mixtures from their characteristic absorption features, and (ii) periodic measurements of the cavity mirrors' reflectivity are made using step-scan phase shift cavity ringdown spectroscopy (PSCRDS). The latter PSCRDS method provides a stand-alone alternative to the more usual method of determining mirror reflectivities by measuring BBCEAS absorption spectra for calibration samples of known composition. Moreover, the instrument's two modes of operation use light from the same light emitting diode transmitted through the cavity in the same optical alignment, hence minimizing the potential for systematic errors between mirror reflectivity determinations and concentration measurements. The ability of the instrument to quantify absorber concentrations is tested in instrument intercomparison exercises for NO{sub 2} (versus a laser broadband cavity ringdown spectrometer) and for H{sub 2}O (versus a commercial hygrometer). A method is also proposed for calculating effective absorption cross sections for fitting the differential structure in BBCEAS spectra due to strong, narrow absorption lines that are under-resolved and hence exhibit non-Beer-Lambert law behavior at the resolution of the BBCEAS measurements. This approach is tested on BBCEAS spectra of water vapor's 4v+{delta} absorption bands around 650 nm. The most immediate analytical application of the present instrument is in quantifying the concentration of reactive trace gases in the ambient atmosphere. The instrument's detection limits for NO{sub 3} as a function of integration time are considered in detail using an Allan variance analysis. Experiments under laboratory conditions produce a 1{sigma} detection limit of 0.25 pptv for a 10 s acquisition time, which improves with further signal averaging to 0.09 pptv in 400 s. Finally, an example of the instrument's performance under field work conditions is presented, in this case of measurements of the sum of NO{sub 3}+N{sub 2}O{sub 5} concentrations in the marine boundary layer acquired during the Reactive Halogens in the Marine Boundary Layer field campaign.

36 MATERIALS SCIENCE↗

Pressure-induced magnetic, structural, and electronic phase transitions in LaFeO{sub 3}: A density functional theory (generalized gradient approximation) + U study

We have investigated the behavior of orthoferrite LaFeO{sub 3} at ambient conditions and under pressure using DFT (generalized gradient approximation (GGA)) + U approach. Ground state electronic (band gap) and magnetic properties are considerably improved due to the Hubbard correction. Moreover, the experimentally observed pressure-driven phase transition, namely, the simultaneous occurrence of spin crossover, isostructural volume collapse, and drastic reduction in electrical resistance (electronic phase transition) is nicely described by GGA + U calculations. In particular, despite a sharp drop in resistance, a small band gap still remains in the low spin state indicating an insulator to semiconductor phase transition, in good agreement with the experiments but in contrast to GGA, which predicts metallic behavior in low spin state. We discuss the origin of variation in electronic structure of LaFeO{sub 3} in low spin state as obtained from GGA to GGA + U methods. These results emphasize the importance of correlation effects in describing the pressure-driven phase transition in LaFeO{sub 3} and other rare-earth orthoferrites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure of Ne 20 states in resonance O 16 + α elastic scattering

Background: The nuclear structure of the cluster bands in 20 Ne presents a challenge for different theoretical approaches. It is especially difficult to explain the broad 0 + , 2 + states at 9 MeV excitation energy. Simultaneously, it is important to obtain more reliable experimental data for these levels in order to quantitatively assess the theoretical framework. Purpose: To obtain new data on 20 Ne α- cluster structure. Method: Thick target inverse kinematics technique was used to study the 16 O+α resonance elastic scattering and the data were analyzed using an R matrix approach. The 20 Ne spectrum, the cluster and nucleon spectroscopic factors were calculated using cluster-nucleon configuration interaction model (CNCIM). Results: We determined the parameters of the broad resonances in 20 Ne: 0 + level at 8.77 ± 0.150 MeV with a width of 750 $^{+500}_{-220}$ keV; 2 + level at 8.75 ± 0.100 MeV with the width of 695 ± 120 keV; the width of 9.48 MeV level of 65 ± 20 keV and showed that 9.19 MeV, 2 + level (if exists) should have width ≤ 10 keV. The detailed comparison of the theoretical CNCIM predictions with the experimental data on cluster states was made. Conclusions: Our experimental results by the TTIK method generally confirm the adopted data on α-cluster levels in 20 Ne. The CNCIM gives a good description of the 20 Ne positive parity states up to an excitation energy of ~7 MeV, predicting reasonably well the excitation energy of the states and their cluster and single particle properties. At higher excitations, the qualitative disagreement with the experimentally observed structure is evident, especially for broad resonances.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

2D photonic crystal layer assisted thiosilicate ceramic plate with red-emitting film for high quality w -LEDs

In this work, we have succeeded in obtaining high quality warm w-light-emitting-diodes (LEDs) by adopting hybrid two-dimensional (2D) structure of SiNx photonic crystal layer (PCL) assisted cyan-emitting ceramic-plate thiosilicate SrLa2Si2S8:Ce3+ with red-emitting film SrLiAl3N4:Eu2+ phosphor on a 430 nm blue LED chip at 350 mA. 2D SiNx PCL was capped with thiosilicate is because it can enhance the luminous efficacy and maintain the low correlated color temperature (CCT) and high color-rendering index (CRI). High luminous efficacy (82.3 lm/W), high special CRI (R9=75) as well as the low CCT (5431 K) of the optimal w-LED was obtained due to the assistances of 2D SiNx PCL and narrow-band red-emitting phosphor with the doping percentage at 10 wt%. The synthesis processes, structural analysis, optical properties and LED device performances were detailed investigated to find out the relationship between the optimum composition and good optical properties. Based on intriguing luminescence properties by the 2D SiNx PCL and red-emitting film phosphor introducing, we proclaim this method could also have high potential application in other phosphor-converted w-LEDs.

36 MATERIALS SCIENCE↗

Mechanisms of defect formation in ingots of 4H silicon carbide polytype

The methods of optical microscopy and X-ray diffractometry have been used to study the features of defect structure in ingots of the SiC-4H polytype; the ingots have featured different diameters and have been grown by the modified Lely method on seeds with deviations of several degrees from the exact orientation (0001)C in the direction Left-Pointing-Angle-Bracket 112-bar0 Right-Pointing-Angle-Bracket (off-cut (0001) seeds). The slip bands observed in the crystals are extended along the [112-bar0] direction and correspond to the secondary slip system of threading dislocations a/3 Left-Pointing-Angle-Bracket 112-bar0 Right-Pointing-Angle-Bracket (1-bar100) for hexagonal close packing (HCP) crystals. Low-angle dislocation boundaries directed along [11-bar00] accommodate the disorientation of neighboring domains, which results from their mutual rotation around the [0001] axis. Enlargement of ingots leads to some increase in the dislocation density, mainly due to threading edge dislocations. The average density of micropipes is in the range of 5-20 cm{sup -2} and practically remains unchanged as the ingot size is increased.

36 MATERIALS SCIENCE↗

FORTRAN subroutines for out-of-core solutions of large complex linear systems

The design and usage of two main subprograms using direct methods to solve large linear complex systems, of the form Ax = b, whose coeffficient matrices are too large to be stored in core are described. The first main subprogram is for systems whose coefficient matrices are of a particular sparse structure, namely, the matrix A can be written in the form B + D, where B is a block-banded system, and D has only a few columns of nonzeros. Key elements of the algorithms used in the subprograms include: the data structure, the strategy for preserving numerical stability, the adaptability of the algorithms for dense systems as well as for block-profile systems.

Yip, E. L.↗

Interpretation of the vacuum ultraviolet photoabsorption spectrum of iodobenzene by ab initio computations

Identification of many Rydberg states in iodobenzene, especially from the first and fourth ionization energies (IE{sub 1} and IE{sub 4}, X{sup 2}B{sub 1} and C{sup 2}B{sub 1}), has become possible using a new ultraviolet (UV) and vacuum-ultraviolet (VUV) absorption spectrum, in the region 29 000-87 000 cm{sup −1} (3.60-10.79 eV), measured at room temperature with synchrotron radiation. A few Rydberg states based on IE{sub 2} (A{sup 2}A{sub 2}) were found, but those based on IE{sub 3} (B{sup 2}B{sub 2}) are undetectable. The almost complete absence of observable Rydberg states relating to IE{sub 2} and IE{sub 3} (A{sup 2}A{sub 2} and B{sup 2}B{sub 2}, respectively) is attributed to them being coupled to the near-continuum, high-energy region of Rydberg series converging on IE{sub 1}. Theoretical studies of the UV and VUV spectra used both time-dependent density functional (TDDFT) and multi-reference multi-root doubles and singles-configuration interaction methods. The theoretical adiabatic excitation energies, and their corresponding vibrational profiles, gave a satisfactory interpretation of the experimental results. The calculations indicate that the UV onset contains both 1{sup 1}B{sub 1} and 1{sup 1}B{sub 2} states with very low oscillator strength, while the 2{sup 1}B{sub 1} state was found to lie under the lowest ππ{sup ∗} 1{sup 1}A{sub 1} state. All three of these {sup 1}B{sub 1} and {sup 1}B{sub 2} states are excitations into low-lying σ{sup ∗} orbitals. The strongest VUV band near 7 eV contains two very strong ππ{sup ∗} valence states, together with other weak contributors. The lowest Rydberg 4b{sub 1}6s state (3{sup 1}B{sub 1}) is very evident as a sharp multiplet near 6 eV; its position and vibrational structure are well reproduced by the TDDFT results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic structure, magnetic properties, spin orientation, and doping effect in Mn 3 Si 2 Te 6

The layered material Mn 3 Si 2 Te 6 , with alternating stacking honeycomb and triangular layers, is attracting considerable attention due to its rich physical properties. Here, in this study, using density functional theory and classical Monte Carlo (MC) methods, we systematically study this system with the 3d 5 electronic configuration. Near the Fermi level, the states are mainly contributed by Te 5p orbitals hybridized with Mn 3d orbitals, resembling a charge-transfer system. Furthermore, the spin orientations of the ferrimagnetic (FiM) ground state display different conductive behaviors when along the ab plane or out-of-plane directions: insulating vs metallic states. The energy difference between the FiM [110] insulating and FiM [001] metallic phases is very small (~0.71 meV/Mn) . Changing the angle θ of spin orientation from in-plane to out-of-plane directions, the band gaps of this system are gradually reduced, leading to an insulator-metal transition, resulting in an enhanced electrical conductivity, related to the colossal angular magnetoresistance (MR) effect. Although the three main magnetic couplings were found to be antiferromagnetic, overall the ground state is FiM. In addition, we also constructed the magnetic phase diagram using the classical XY spin model studied with the MC method. Three magnetic phases were obtained, including antiferromagnetic order, noncollinear spin patterns, and FiM order. Moreover, we also investigated the Se and Ge doping into the Mn 3 Si 2 Te 6 system: the FiM state has the lowest energy among the magnetic candidates for both Se- and Ge-doped cases. The magnetic anisotropy energy (MAE) decreases in the Se-doped case because the Mn orbital moment is reduced as the doping x increases. Due to the small spin-orbit-coupling effect of Se, the insulator-metal transition caused by the spin orientation disappears in the Se-doped case, resulting in an insulating phase in the FiM [001] phase. This causes a reduced colossal angular MR. However, both the MAE and the band gap of the Ge-doped case do not change much with increasing doping x . Our results for Mn 3 Si 2 Te 6 could provide guidance to experimentalists and theorists working on this system or related materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interdependence of spin structure, anion height and electronic structure of BaFe{sub 2}As{sub 2}

Superconducting as well as other electronic properties of Fe-based superconductors are quite sensitive to the structural parameters specially, on anion height which is intimately related to z{sub As}, the fractional z co-ordinate of As atom. Due to presence of strong magnetic fluctuation in these Fe-based superconductors, optimized structural parameters (lattice parameters a, b, c) including z{sub As} using density functional theory (DFT) under generalized gradient approximation (GGA) does not match experimental values accurately. In this work, we show that the optimized value of z{sub As} is strongly influenced by the spin structures in the orthorhombic phase of BaFe{sub 2}As{sub 2} system. We take all possible spin structures for the orthorhombic BaFe{sub 2}As{sub 2} system and then optimize z{sub As}. Using these optimized structures we calculate electronic structures like density of states, band structures etc., for each spin configurations. From these studies we show that the electronic structure, orbital order which is responsible for structural as well as related to nematic transition, are significantly influenced by the spin structures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Bonding and microstructural stability in Ni55Ti45 studied by experimental and theoretical methods

Spiral orbit tribometry friction tests performed on Ni-rich Ni55Ti45 titanium ball bearings indicate that this alloy is a promising candidate for future aerospace bearing applications. Microstructural characterization of the bearing specimens was performed using transmission electron microscopy and energy dispersive spectroscopy, with NiTi, Ni4Ti3, Ni3Ti, and Ni2Ti4Ox phases identified within the microstructure of the alloy. Density functional theory was applied to predict the electronic structure of the NixTiy phases, including the band structure and site projected density of states. Ultraviolet photoemission spectroscopy was used to verify the density of states results from the density functional theory calculations, with good agreement observed between experiment and theory.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bonding and Microstructural Stability in Ni55Ti45 Studied by Experimental and Theoretical Methods

Spiral orbit tribometry friction tests performed on Ni-rich Ni55Ti45 titanium ball bearings indicate that this alloy is a promising candidate for future aerospace bearing applications. Microstructural characterization of the bearing specimens was performed using transmission electron microscopy and energy dispersive spectroscopy, with NiTi, Ni4Ti3, Ni3Ti, and Ni2Ti4Ox phases identified within the microstructure of the alloy. Density functional theory was applied to predict the electronic structure of the NixTiy phases, including the band structure and site projected density of states. Ultraviolet photoemission spectroscopy was used to verify the density of states results from the density functional theory calculations, with good agreement observed between experiment and theory.

Stott, Amanda C.↗

6 nm super-resolution optical transmission and scattering spectroscopic imaging of carbon nanotubes using a nanometer-scale white light source

Abstract Optical transmission and scattering spectroscopic microscopy at the visible and adjacent wavelengths denote one of the most informative and inclusive characterization methods in material research. Unfortunately, restricted by the diffraction limit of light, it cannot resolve the nanoscale variation in light absorption and scattering, diagnostics of the local inhomogeneity in material structure and properties. Moreover, a large quantity of nanomaterials has anisotropic optical properties that are appealing yet hard to characterize through conventional optical methods. There is an increasing demand to extend the optical hyperspectral imaging into the nanometer length scale. In this work, we report a super-resolution hyperspectral imaging technique that uses a nanoscale white light source generated by superfocusing the light from a tungsten-halogen lamp to simultaneously obtain optical transmission and scattering spectroscopic images. A 6-nm spatial resolution in the visible to near-infrared wavelength regime (415–980 nm) is demonstrated on an individual single-walled carbon nanotube (SW-CNT). Both the longitudinal and transverse optical electronic transitions are measured, and the SW-CNT chiral indices can be identified. The band structure modulation in a SW-CNT through strain engineering is mapped.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study of electronic transport properties of doped 8AGNR

The electronic and transport properties of 8-armchair graphene nanoribbon (8AGNR) with defect at different sites are investigated by performing first-principles calculations based on density functional theory (DFT). The calculated results show that the 8AGNR are semiconductor. The introduction of 3d transition metals, creates the nondegenerate states in the conduction band, makes 8AGNR metallic. The computed transmission spectrum confirms that AGNR are semiconducting in nature and their band gap remain unchanged and localized states appear when there is vacancy in their structures, and the conductance decreases due to defects compared with the pristine nanoribbon.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗