Search NASA⌕ Search

SEARCH · Search NASA

Results for “Battery Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Modeling and Optimization Methods for Controlling and Sizing Grid-connected Energy Storage: A Review

Purpose of Review Energy storage is capable of providing a variety of services and solving a multitude of issues in today's rapidly evolving electric power grid. This paper reviews recent research on modeling and optimization methods for optimally controlling and sizing grid-connected battery energy storage systems (BESSs). Open issues and promising research directions are discussed. Recent Findings Recent studies on BESS dispatch, evaluation, and sizing focus on advanced modeling and optimization methods to maximize stacked value streams from multiple services. BESS models have been improved to better represent operational characteristics or capture degradation effects. Different solution methods and optimization techniques have been proposed to improve the benefits and cost-effectiveness of BESSs, using deterministic approaches prevalently but with impressive progress in capturing and addressing uncertainties. Summary Recent progress in BESS scheduling and sizing better supports planning and operational decision-making in different use cases, which is highly important to advance the deployment of BESSs. Additional research is required to properly model the trade-off between short-term benefits and service life with multiple degradation effects explicitly considered in the decision-making process. Advanced methods are to be developed for effectively determining optimal BESS sizes that maximize overall benefits within a varying lifetime considering diversified system, conditions as well as uncertainties at planning and operational stages.

Wu, Di↗

Suppression of the Biermann Battery and Stabilization of the Thermomagnetic Instability in Laser Fusion Conditions

Magnetic field generated by the Biermann battery is thought to be one of the principal mechanisms behind the inhibition of heat flow in laser-plasma interactions, and is predicted to grow exponentially in some contexts due to the thermomagnetic instability [Tidman and Shanny, Phys. Fluids 17, 1207 (1974)]. In contrast to these predictions, however, here we have conducted Vlasov-Fokker-Planck simulations of magnetic field dynamics under a range of classically unstable laser-fusion conditions, and find field generation to be strongly suppressed, preventing magnetization of the transport, and stabilizing instability. By deriving new scaling laws, we show that this stabilization is a consequence of (i) heavy suppression of the Biermann battery under nonlocal conditions; (ii) rapid convection of magnetic field by the heat flow; and (iii) comparatively short field length scales. Our results indicate that classical models substantially overestimate the importance of magnetic fields generated by the Biermann battery, and the susceptibility of laser-fusion plasmas to the thermomagnetic instability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Highly Efficient Organosulfur and Lithium‐Metal Hosts Enabled by C@Fe 3 N Sponge

Abstract Lithium‐organosulfur (Li‐OS) batteries, despite possessing high theoretical specific capacity, encounter a few practical challenges, including unsatisfactory lifespan and low active material utilization under realistic conditions. Here, diisoropyl xanthogen polysulfide (DIXPS) has been selected as a model organosulfur compound to investigate the practical feasibility of Li‐OS batteries under realistic conditions. A well‐designed freestanding carbon sponge decorated with Fe 3 N nanoparticles (C@Fe 3 N) is introduced into the Li‐OS cells as a scaffold for both Li and DIXPS. The lithiophilic property of the C@Fe 3 N host guides uniform lithium deposition at the anode, and the catalysis of the DIXPS conversion reaction promotes the kinetics at the cathode. Impressively, the synergistic effect of C@Fe 3 N leads to an extremely stable cycling performance over 1 000 cycles in a Li‐OS full cell under realistic conditions.

He, Jiarui↗

Validation of International Space Station Electrical Performance Model via On-orbit Telemetry

The first U.S. power module on International Space Station (ISS) was activated in December 2000. Comprised of solar arrays, nickel-hydrogen (NiH2) batteries, and a direct current power management and distribution (PMAD) system, the electric power system (EPS) supplies power to housekeeping and user electrical loads. Modeling EPS performance is needed for several reasons, but primarily to assess near-term planned and off-nominal operations and because the EPS configuration changes over the life of the ISS. The System Power Analysis for Capability Evaluation (SPACE) computer code is used to assess the ISS EPS performance. This paper describes the process of validating the SPACE EPS model via ISS on-orbit telemetry. To accomplish this goal, telemetry was first used to correct assumptions and component models in SPACE. Then on-orbit data was directly input to SPACE to facilitate comparing model predictions to telemetry. It will be shown that SPACE accurately predicts on-orbit component and system performance. For example, battery state-of-charge was predicted to within 0.6 percentage points over a 0 to 100 percent scale and solar array current was predicted to within a root mean square (RMS) error of 5.1 Amps out of a typical maximum of 220 Amps. First, SPACE model predictions are compared to telemetry for the ISS EPS components: solar arrays, NiH2 batteries, and the PMAD system. Second, SPACE predictions for the overall performance of the ISS EPS are compared to telemetry and again demonstrate model accuracy.

Jannette, Anthony G.↗

Modeling assisted synthesis of Zr-doped Li 3-x In 1-x Zr x Cl 6 with ultrahigh ionic conductivity for lithium-ion batteries

All-solid-state lithium-ion batteries (ASSLBs) are an important milestone for the future of energy storage because of their capability of impressive energy density and outstanding safety. However, oxide and sulfide solid-state electrolytes (SSEs) suffer from either low ionic conductivity or poor chemical stability. In contrast, halide-based SSEs, are promising as candidate materials owing to high conductivity, good stability, and broad cathode compatibility. Though element doping of the SSEs is an effective and common approach to further improve their electrochemical properties, dopant exploration and optimization through solely experimental trials are both costly and time-consuming. For this aspect, computational simulations for dopant element and concentration screening are adopted in this research and zirconium is selected as a suitable dopant for Li 3 InCl 6 . Further, the synthesized Li 2.75 In 0.75 Zr 0.25 Cl 6 exhibited Li ionic conductivity of 5.82 x 10 -3 Scm -1 at room temperature, which is the highest among reported halide SSEs. The ASSLB formed with Li 2 CoO 2 -Li 2.75 In 0.75 Zr 0.25 Cl 6 -Li/In delivers a high initial capacity of 129.3 mAh∙g -1 . Conclusively, this work provides an effective approach which combines computational modeling and experimental verification for the development of halide SSEs with improved stability and conductivity. The successful design approach and compelling results provide further possibilities and capabilities in future SSE research.

25 ENERGY STORAGE↗

Unblocking Oxygen Charge Compensation for Stabilized High‐Voltage Structure in P2‐Type Sodium‐Ion Cathode

Abstract Layered transition‐metal (TM) oxides are ideal hosts for Li + charge carriers largely due to the occurrence of oxygen charge compensation that stabilizes the layered structure at high voltage. Hence, enabling charge compensation in sodium layered oxides is a fascinating task for extending the cycle life of sodium‐ion batteries. Herein a Ti/Mg co‐doping strategy for a model P2‐Na 2/3 Ni 1/3 Mn 2/3 O 2 cathode material is put forward to activate charge compensation through highly hybridized O 2 p TM 3 d covalent bonds. In this way, the interlayer OO electrostatic repulsion is weakened upon deeply charging, which strongly affects the systematic total energy that transforms the striking P2–O2 interlayer contraction into a moderate solid‐solution‐type evolution. Accordingly, the cycling stability of the codoped cathode material is improved superiorly over the pristine sample. This study starts a perspective way of optimizing the sodium layered cathodes by rational structural design coupling electrochemical reactions, which can be extended to widespread battery researches.

25 ENERGY STORAGE↗

Novel Technique for Developing Linearized Convex System Models from Experimentally Derived Data: Preprint

This paper presents a novel technique for generating a convex system model from an experimentally derived data set which features variance among repeated measurements. The convex system model developed as a test case characterizes the dynamic system losses of a vanadium redox low battery as a function of the active power output and the battery state of charge.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Elucidation of Electrolyte Decomposition Pathways in Li--O2 Batteries using Ab Initio Computations

Li-O2 batteries offer exciting possibilities for energy-storage applications requiring higher energy content than current Li-ion battery technologies. However, development of commercial Li-O2 batteries faces many challenges including electrolyte decomposition in order to realize the full potential of this emerging technology. In this work, we present ab initio calculations that probe the role of reactive oxygen species including singlet oxygen, superoxide, and peroxides on electrolyte decomposition for potential organic electrolytes for use in Li-O2 batteries. We investigate the influence that the harsh electrochemical environment near the cathode plays in promoting electrolyte decomposition by using increasingly detailed computational models. Our results highlight existing problems with organic electrolytes for Li-O2 battery development and suggest potential design strategies for reducing electrolyte decomposition.

Li-O2 Batteries↗

A novel shallow bore ground heat exchanger for ground source heat pump applications—Model development and validation

A novel ground heat exchanger design, the Underground Thermal Battery (UTB), was proposed as a low-cost alternative to the conventional vertical bore ground heat exchanger (VBGHE) for the application of ground source heat pumps (GSHPs). The UTB is designed to be installed in a shallow borehole (less than 6 m deep) and thus could cost much less than the conventional VBGHE, which usually is installed in vertical bores 60 m deep. By utilizing natural convection of water and phase change materials, the UTB tempers its temperature change in response to thermal loads, which helps improve the efficiency of GSHPs. A one-dimensional (1D) model of the UTB has been developed and validated with the measured performance data of a small-scale UTB, as well as the simulation results of a more detailed three dimensional (3D) numerical model, which accounts for both heat transfer and fluid dynamics in the UTB. Further, this 1D model is computationally much more efficient than the 3D model and thus can simulate the annual performance of the UTB with acceptable computation time. The 1D model has been used to evaluate the performance of the UTB so that it can be compared with the conventional VBGHE.

42 ENGINEERING↗

Tank Test of an Active Power Rectification in Wave-to-Wire Energy Conversion

Maximum power control algorithms in wave energy converter (WEC) are mainly based on the fluid-structure dynamics with impedance matching from power take-off (PTO) damping or model predictive control through the buoy dynamics. However, the conventional buoy characteristics study cannot satisfy estimation of maximum output power in a practical wave-to-wire (W2W) system due to significant losses on mechanical and electrical components from PTO to power converter in comparison with the losses on the buoy. To analysis the non-ideal effects from mechanical transmission and energy conversion characteristics of WEC with a power converter output, a W2W simulation and tank testing is performed. The 1:20 scale WEC system with 1.17m buoy diameter includes a single body heaving buoy, mechanical-motion-rectifier based power-take-off, and power converter that store its output energy to a battery load. From the tank testing results, a circuit model is built and is used to estimate the system performance. The non-ideal effects such as viscous damping between buoy and power take-off, gearbox loss, generator loss, and power converter loss in the system are included in the circuit model with efficiencies from 60 - 80%. The maximum extracted power results under various wave conditions are dominated by these non-ideal effect.

16 TIDAL AND WAVE POWER↗

Analysis of Automated Transit Network Systems with Battery-Electric Vehicles in Automated Mobility Districts: Preprint

The paper provides an overview of the insights and findings of the National Renewable Energy Laboratory's (NREL) ongoing research on the implementation of automated mobility districts (AMDs). AMD is a term coined by NREL to describe a geographically defined district or major activity center located in a dense urban setting with mobility applications provided by automated/autonomous vehicle (AV) systems spanning internal circulation and first-mile/last-mile connections to regional transportation hubs. Research over the past five years has focused on understanding the evolution of AMDs, beginning with demonstrations of automated shuttles prior to the pandemic, to more integrated on-demand mobility systems currently in initial stages of deployment. Initial insights and findings from earlier studies include the need for designation of a "jurisdiction having authority," a clear vision of a complete system to provide end-to-end mobility services, and the requisite intelligent infrastructure to complement AV technology. NREL's most recent Phase III research investigates station boarding/alighting (curb) issues, the full electrification of fleets, and the need for a systems engineering methodology (SEM) to properly analyze the complexities resulting from the convergence of automation, on-demand mobility, and electrification of the transit systems within the AMD. The paper reviews the findings of AMD research conducted during Phase I, II, and III, with special emphasis on Phase III results with respect to a descriptive example of the proposed SEM when a "digital twin" analytical model is used to simulate the transport fleet's battery-electric vehicle miles of travel and associated duty cycles through a rigorous analytical assessment with a comprehensive modeling process.

ADVANCED PROPULSION SYSTEMS↗

Battery Pack Thermal Design

This presentation describes the thermal design of battery packs at the National Renewable Energy Laboratory. A battery thermal management system essential for xEVs for both normal operation during daily driving (achieving life and performance) and off-normal operation during abuse conditions (achieving safety). The battery thermal management system needs to be optimized with the right tools for the lowest cost. Experimental tools such as NREL's isothermal battery calorimeter, thermal imaging, and heat transfer setups are needed. Thermal models and computer-aided engineering tools are useful for robust designs. During abuse conditions, designs should prevent cell-to-cell propagation in a module/pack (i.e., keep the fire small and manageable). NREL's battery ISC device can be used for evaluating the robustness of a module/pack to cell-to-cell propagation.

25 ENERGY STORAGE↗

Understanding thermal and mechanical effects on lithium plating in lithium-ion batteries

Lithium plating is one of the main concerns for cell durability, as cyclable lithium and cell capacity are decreased during the process. Thermal and mechanical loads can influence cell behavior, including lithium plating driving forces, as suggested by the Arrhenius equation and the Bruggeman relation, respectively. Hence, a 1D and a 3D model are employed to study the thermal and mechanical effects on lithium plating in a lithium-ion battery with a high areal capacity (4 mAh/cm 2 ). The 1D model assumes uniform mechanical and temperature profile, while the 3D model is capable of capturing the nonuniformity of stress and temperature in the cell. Further, the effects of mechanical deformation and different temperatures on the process of lithium plating are investigated in this study. With the help of the 1D charging simulations, it is observed that lower temperatures increase the risk of lithium plating and the presence of mechanical deformations can accelerate its initiation. Furthermore, 3D charging simulations indicated that folds and boundaries of jellyrolls are more susceptible to lithium plating due to the higher stress concentration and lower temperature, respectively.

25 ENERGY STORAGE↗

Role of Electrolyte in Overcoming the Challenges of LiNiO 2 Cathode in Lithium Batteries

LiNiO 2 (LNO) is a high-capacity and model cathode first discovered in the 1980s that fell out of favor due to its intrinsic instabilities. However, research activities toward LNO are once again on the rise as the push for higher-energy-density cells marches on. Here we demonstrate here that with appropriate modern electrolytes, major performance improvements can be achieved with LNO with no additional modifications. Cells with a localized high concentration electrolyte (LHCE) deliver 92% capacity retention after 200 cycles compared with 56% capacity retention in a baseline carbonate electrolyte, maintain 94% capacity after high-voltage storage compared with 77% capacity, and display a higher onset temperature of thermal runaway of 244 °C compared with 188 °C. These improvements are attributed to the LHCE’s high oxidative stability and its formation of fluorine-rich interphases. Although further characterization of this new class of electrolyte is necessary, this work demonstrates that modern electrolytes can be drop-in enablers of high-capacity, long-cycle-life cells.

25 ENERGY STORAGE↗

Three-dimensional Fe 3 O 4 /N-graphene sponge as an efficient organosulfide host for high-performance lithium-organosulfur batteries

The rapid capacity decay and unclear mechanism for the capacity fade limit the practical application of lithium-organosulfur batteries. Herein, we employ dimethyl trisulfide (DMTS) as a model compound to investigate the capacity fading mechanism and propose a solution to improve its cycling stability. Our results reveal that both DMTS and its discharge products (e.g., LiSCH 3 , LiSSCH 3 ) are soluble in the electrolyte, leading to severe active material migration and loss, which becomes the predominant capacity fading mechanism. A three-dimensional nitrogen-doped graphene sponge decorated with Fe 3 O 4 nanoparticles (3DFNG) is designed as a host for DMTS, which effectively confine the active material, enabling a specific capacity of 822 mA h g -1 at C/10 rate and good cycling stability for 500 cycles with a capacity decay of as low as 0.09% per cycle. This work is expected to open up a promising direction to realize highly efficient hosts for lithium-organosulfur batteries.

25 ENERGY STORAGE↗

Bayesian learning for rapid prediction of lithium-ion battery-cycling protocols

Advancing lithium-ion battery technology requires the optimization of cycling protocols. A new data-driven methodology is demonstrated for rapid, accurate prediction of the cycle life obtained by new cycling protocols using a single test lasting only 3 cycles, enabling rapid exploration of cycling protocol design spaces with orders of magnitude reduction in testing time. We achieve this by combining lifetime early prediction with a hierarchical Bayesian model (HBM) to rapidly predict performance distributions without the need for extensive repetitive testing. The methodology is applied to a comprehensive dataset of lithium-iron-phosphate/graphite comprising 29 different fast-charging protocols. HBM alone provides high protocol-lifetime prediction performance, with 6.5% of overall test average percent error, after cycling only one battery to failure. Here, by combining HBM with a battery lifetime prediction model, we achieve a test error of 8.8% using a single 3-cycle test. In addition, the generalizability of the HBM approach is demonstrated for lithium-manganese-cobalt-oxide/graphite cells.

25 ENERGY STORAGE↗