Search NASA⌕ Search

SEARCH · Search NASA

Results for “CS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Correlation between Asian Dust and Specific Radioactivities of Fission Products Included in Airborne Samples in Tokushima, Shikoku Island, Japan, Due to the Fukushima Nuclear Accident

Radioactive fission product {sup 131}I released from the Fukushima Daiichi Nuclear Power Plants (FD-NPP) was first detected on March 23, 2011 in an airborne aerosol sample collected at Tokushima, Shikoku Island, located in western Japan. Two other radioactive fission products, {sup 134}Cs and {sup 137}Cs were also observed in a sample collected from April 2 to 4, 2011. The maximum specific radioactivities observed in this work were about 2.5 to 3.5 mBq×m{sup -3} in a airborne aerosol sample collected on April 6. During the course of the continuous monitoring, we also made our first observation of seasonal Asian Dust and those fission products associated with the FDNPP accident concurrently from May 2 to 5, 2011. We found that the specific radioactivities of {sup 134}Cs and {sup 137}Cs decreased drastically only during the period of Asian Dust. And also, it was found that this trend was very similar to the atmospheric elemental concentration (ng×m{sup -3}) variation of stable cesium ({sup 133}Cs) quantified by elemental analyses using our developed ICP-DRC-MS instrument.

54 ENVIRONMENTAL SCIENCES↗

Atomic scale control of catalytic process in oxidation of Pb thin films

Using scanning tunneling microscopy (STM), we demonstrate that oxidation on Pb films is greatly enhanced by atomic Cs catalysts. With only a minute concentration of isolated Cs substitutional atoms in the surface layer (0.004 ML coverage), surface oxidation rates are greatly enhanced. First-principles density functional theory (DFT) calculations reveal that a substitutional Cs atom strongly increases O2 binding on the surface. Then, with additional oxygen exposure this substitutional Cs-initiated oxidation process results in growth of PbO layers in an auto-catalytic manner. Furthermore, we investigate the role of temperature in the oxidation of the Pb films with and without Cs, and we explore the overall morphology of the resultant oxide layers.

Kim, Jisun↗

Surface Structure Spread Single Crystals (S4C): Preparation and characterization

A set of six spherically curved Cu single crystals referred to as Surface Structure Spread Single Crystals (S{sup 4}Cs) has been prepared in such a way that their exposed surfaces collectively span all possible crystallographic surface orientations that can be cleaved from the face centered cubic Cu lattice. The method for preparing these S{sup 4}Cs and for finding the high symmetry pole point are described. Optical profilometry has been used to determine the true shapes of the S{sup 4}Cs and show that over the majority of the surface, the shape is extremely close to that of a perfect sphere. The local orientations of the surfaces lie within ±1{degree} of the orientation expected on the basis of the spherical shape; their orientation is as good as that of many commercially prepared single crystals. STM imaging has been used to characterize the atomic level structure of the Cu(111)±11{degree}-S{sup 4}C. This has shown that the average step densities and the average step orientations match those expected based on the spherical shape. In other words, although there is some distribution of step-step spacing and step orientations, there is no evidence of large scale reconstruction or faceting. The Cu S{sup 4}Cs have local structures based on the ideal termination of the face centered cubic Cu lattice in the direction of termination. The set of Cu S{sup 4}Cs will serve as the basis for high throughput investigations of structure sensitive surface chemistry on Cu.

36 MATERIALS SCIENCE↗

Fetal bovine serum and human constitutive androstane receptor: Evidence for activation of the SV23 splice variant by artemisinin, artemether, and arteether in a serum-free cell culture system

The naturally occurring SV23 splice variant of human constitutive androstane receptor (hCAR-SV23) is activated by di-(2-ethylhexyl)phthalate (DEHP), which is detected as a contaminant in fetal bovine serum (FBS). In our initial experiment, we compared the effect of dialyzed FBS, charcoal-stripped, dextran-treated FBS (CS-FBS), and regular FBS on the basal activity and ligand-activation of hCAR-SV23 in a cell-based reporter gene assay. In transfected HepG2 cells cultured in medium supplemented with 10% FBS, basal hCAR-SV23 activity varied with the type of FBS (regular > dialyzed > CS). DEHP increased hCAR-SV23 activity when 10% CS-FBS, but not regular FBS or dialyzed FBS, was used. With increasing concentrations (1–10%) of regular FBS or CS-FBS, hCAR-SV23 basal activity increased, whereas in DEHP-treated cells, hCAR-SV23 activity remained similar (regular FBS) or slightly increased (CS-FBS). Subsequent experiments identified a serum-free culture condition to detect DEHP activation of hCAR-SV23. Under this condition, artemisinin, artemether, and arteether increased hCAR-SV23 activity, whereas they decreased it in cells cultured in medium supplemented with 10% regular FBS. By comparison, FBS increased the basal activity of the wild-type isoform of hCAR (hCAR-WT), whereas it did not affect the basal activity of the SV24 splice variant (hCAR-SV24) or ligand activation of hCAR-SV24 and hCAR-WT by 6-(4-chlorophenyl)imidazo[2,1-b][1,3]thiazole-5-carbaldehyde O-(3,4-dichlorobenzyl)oxime (CITCO). The use of serum-free culture condition was suitable for detecting CITCO activation of hCAR-WT and hCAR-SV24. In conclusion, FBS leads to erroneous classification of pharmacological ligands of hCAR-SV23 in cell-based assays, but investigations on functional ligands of hCAR isoforms can be conducted in serum-free culture condition. - Highlights: • FBS leads to erroneous pharmacological classification of hCAR-SV23 ligands. • Artemisinin, artemether, and arteether activate hCAR-SV23 in the absence of FBS. • Serum-free culture condition can be used for identifying ligands of hCAR isoforms.

60 APPLIED LIFE SCIENCES↗

Onset of magnetic reconnection in a collisionless, high-β plasma

In a magnetized, collisionless plasma, the magnetic moment of the constituent particles is an adiabatic invariant. An increase in the magnetic-field strength in such a plasma hence leads to an increase in the thermal pressure perpendicular to the field lines. Above a $\unicode[STIX]{x1D6FD}$ -dependent threshold (where $\unicode[STIX]{x1D6FD}$ is the ratio of thermal to magnetic pressure), this pressure anisotropy drives the mirror instability, producing strong distortions in the field lines on ion-Larmor scales. The effect of this instability on magnetic reconnection is investigated using a simple analytical model for the formation of a current sheet (CS) and the associated production of pressure anisotropy. The difficulty in maintaining an isotropic, Maxwellian particle distribution during the formation and subsequent thinning of a CS in a collisionless plasma, coupled with the low threshold for the mirror instability in a high- $\unicode[STIX]{x1D6FD}$ plasma, imply that the geometry of reconnecting magnetic fields can differ radically from the standard Harris-sheet profile often used in simulations of collisionless reconnection. Because of this, depending on the rate of CS formation and the initial CS thickness, tearing modes whose growth rates and wavenumbers are boosted by this difference may disrupt the mirror-infested CS before standard tearing modes can develop. A quantitative theory is developed to illustrate this process, which may find application in the tearing-mediated disruption of kinetic magnetorotational ‘channel’ modes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Molecular Origins of Near-Infrared Luminescence in Molybdenum and Tungsten Oxyhalide Perovskites

Materials with near-infrared (near-IR) luminescence are desirable for applications in communications and sensing, as well as biomedical diagnostics and imaging. The most used inorganic near-IR emitters rely on precise doping of host crystal structures with select rare-earth or transition metal ions. Recently, another class of materials with intrinsic near-IR emission has been reported. The compositions of these materials were initially described as vacancy-ordered halide double perovskites Cs 2 MoCl 6 and Cs 2 WCl 6 , but further investigation by some of us on the compound reported as Cs2WCl6 revealed an oxyhalide instead, with a composition Cs 2 WO x Cl 6–x , where 1 < x < 2. Here we demonstrate that the Mo compounds similarly possess the composition Cs 2 MoO x Cl 6–x or Cs 2 MoO x Br 6–x where 1 < x < 2. Preparing the pure halide appears harder for Mo than for W, and we have not succeeded in doing so. The distinctly different composition requires the coordination environment and oxidation state for the Mo and W centers to be reconsidered from what was assumed for the pure halides. In this work, we examine the mechanism for near-IR emission in these materials given their true structures and compositions. We demonstrate that the luminescence is due to the specific d-orbital splitting caused by the presence of oxygen in the distorted [MOX 5 ] 2– octahedra (X is Cl or Br). The fine structure in the emission spectra at low temperatures has been resolved and is attributed to vibronic coupling to the Mo–O and W–O bond stretches. Understanding the true structure and composition of these interesting materials, besides explaining the near-IR luminescence, suggests how this desirable emission can be realized and manipulated.

36 MATERIALS SCIENCE↗

Formation and Composition-Dependent Properties of Alloys of Cubic Halide Perovskites

Distinct shortcomings of individual halide perovskites for solar applications, such as restricted range of band gaps, propensity of $ABX_3$ to decompose into $AX + BX_2$, or oxidation of 2$ABX_3$ into $A_2BX_6$, have led to the need to consider alloys of individual perovskites such as [FA,Cs][Pb,Sn][Br,I] 3 . This proposition creates a nontrivial material selection problem associated with a six-component structure, spanning a continuum of three sets of compositions (one for each sublattice) and requiring control of phase separation or ordering in each alloyed subfield. Not surprisingly, material and structure choices were made thus far mostly via trial-and-error explorations among a large number of arrangements. In this work, we use ideas from solid-state theory of semiconductor alloys to analyze the behaviors of the canonical [FA,Cs][Pb,Sn]I 3 alloy system, where FA is formamidinium. Density functional calculations utilizing specially constructed supercells are used to calculate the composition dependence of band gaps, energy of decomposition, and alloy mixing enthalpies. A number of clear trends are observed for A-site alloys [Cs,FA]SnI 3 and [Cs,FA]PbI 3 , as well as for B-site alloys Cs[Sn,Pb]I 3 and FA[Sn,Pb]I 3 . To understand the physical reasons that control these trends, we decompose the alloy properties into distinct physical terms: (i) the energies associated with removing the octahedral deformations (tilting, rotations, B-site displacements) of the individual components, (ii) the energies for compressing the larger component and expanding the smaller one to the alloy volume V(x), (iii) the charge-transfer energies associated with placing the alloyed units onto a common lattice, and finally, (iv) structural relaxation of all bonds within the cells. This analysis clarifies the origin of the observed trends in band gaps, decomposition energies, and mixing enthalpies. Unlike a number of previous calculations, we find that the proper description of alloy physics requires that even the pure, nonalloyed, end-point compounds need to be allowed to develop local environment-dependent octahedral deformation that lowers significantly the total energy and raises their band gaps.

36 MATERIALS SCIENCE↗

CsO x Nanostructures on Au(111): Morphology- and Size-dependent Activity for the Water–Gas Shift Reaction

Alkali oxides are typically used as promoters of heterogeneous catalysts for the water–gas shift (WGS; H 2 O + CO → H 2 + CO 2 ) reaction. On Au(111), CsO x exhibits diverse nanostructures at varying coverages, as revealed by scanning tunneling microscopy. Clusters of cesium oxide (Cs 2 O 2 ) nucleate at elbow sites of the Au(111) herringbone when θ Cs is less than 0.1 ML. Subsequently, these clusters transform into two-dimensional (2D) islands (Cs 2 O, Cs 2 O 2 , CsO 2 ) as the cesium coverage increases (θ Cs > 0.1 ML). Both types of CsO x nanostructures enable the WGS process on Au(111). The highest activity was seen for the cesium oxide clusters which facilitated the partial dissociation of water and binding of CO. The CO ads and OH ads groups were not strongly bound and probably reacted to yield a short-lived HOCO intermediate that led to gaseous H 2 and CO 2 . The 2D islands of CsO x also enabled the WGS but their efficiency was reduced due to the formation of cesium hydroxide compounds (limiting mobility of OH groups) and the generation of CO 3 and C species (blocking of active centers). The fact that the performance of the CsO x /Au(111) catalysts changed dramatically with variations in the chemical properties of the CsO x nanostructures indicates that the alkali oxide was an integral part of the active phase, playing a central role in the activation and conversion of the reactants. To attach the label of “promoter” to CsO x is a simplification that does not help in the design and optimization of catalysts for C1 chemistry. In conclusion, to achieve a rational design, one must consider the structural and chemical properties of the alkali oxide.

36 MATERIALS SCIENCE↗

Competitive Sorption of H 2 O and CO 2 in Clay Mineral Interlayers

The first-reported competitive CO 2 –H 2 O sorption isotherms on a naturally occurring expandable clay mineral (saponite) exchanged with Na, K, and Cs at near ambient CO 2 concentrations (1% CO 2 ) are reported by combining ATR-FTIR spectroscopy with gravimetric sorption methods. Little CO 2 sorption was observed at high relative humidity (RH) but increased significantly at low RH. Unlike prior work where CO 2 sorption was reported on samples that were previously subjected to heating and/or evacuation treatment to remove sorbed H 2 O, this study manipulated CO 2 sorption by controlling RH. CO 2 sorption increased in the order Cs- > K- > Na-exchanged saponite and was anticorrelated with the Gibbs energy of hydration of the exchangeable cation. As expected, H 2 O sorption followed the opposite trend, with increased H 2 O sorption occurring in the order Na > K > Cs. The amount of CO 2 sorbed using 1 atm CO 2 (p/p o = 1.0) ranged from 50 to 30 mg CO 2 /g clay and from 1.25 to 0.8 mg CO2 /g clay for 1% CO 2 (p/p o = 0.01) in N 2 . The sensitivity of the ATR-FTIR measurements is demonstrated by detecting the CO 2 stretch of adsorbed CO 2 from air containing 500 ppmv CO 2 . The spectral features of sorbed CO 2 were minimally affected by the nature of the exchangeable cation or variations in H 2 O content. However, the position of the HOH bending band shifted significantly from 1638 to 1610 cm –1 as H 2 O content decreased, reflecting changes in intermolecular hydrogen bonding between H 2 O molecules in the saponite interlayer. The shift in position of the HOH bending band to lower energy was coincident with increased CO 2 sorption. CO 2 sorption in clay mineral interlayers is consistent with sorption on weakly hydrated partially hydrophobic sites found on low charge density smectites and is enhanced by lower RH and by the presence of weakly hydrated exchangeable cations like Cs + or K + . In conclusion, the greatest CO 2 sorption occurs on Cs-saponite because this is the least hydrated cation of the three used in the study and indicates that CO2 sorption occurs on the neutral portion of the siloxane surface.

Johnston, Cliff T. [Purdue Univ., West Lafayette, ↗

In Situ Synthesis of Phosphate-Based CelloMOF as a Promising Separator for Li–Ion Batteries

Nowadays, battery separators play a critical role in determining the sustainability, electrochemical efficiency, and safety of lithium-ion batteries (LIBs). In this contribution, we developed fire-resistant composite membranes called CelloMOF by in situ grafting of metal-organic framework, ZIF-67, onto phosphorylated cellulose nanofibers (P-CNFs) followed by a vacuum filtration process akin to papermaking. The hybrid ZIF-67@P-CNF membrane exhibits superior properties than a polyolefin-based commercial separator (CS) in terms of enhanced thermal and dimensional stability, flame-retardant properties, better surface wettability, and improved electrolyte uptake. Thermal dimensional stability tests revealed that the ZIF-67@P-CNF separator maintained its structure even at 200 °C, whereas CS suffered severe shrinkage, potentially leading to internal short circuits. Combustion tests showed a peak heat release rate (PHRR) of 34.5 W/g and a total heat release (THR) of 1.61 kJ/g for ZIF-67@P-CNF, significantly lower than the PHRR (1111.82 W/g) and THR (40.89 kJ/g) of CS. The composite separator also demonstrated significantly improved wettability, with a contact angle of 32 ± 1.04°, compared to 92 ± 1.07° for CS, highlighting its hydrophilic nature. Electrochemical evaluations in LiFePO 4 /Li half-cells indicated a higher discharge capacity of 149 mA h g -1 at 0.2 C and superior capacity retention of 86% after 50 cycles, outperforming CS (145 mA h g -1 and 84%, respectively). In conclusion, these results underscore the potential of the ZIF-67@P-CNF membrane to advance safe, high-performance LIBs by addressing critical challenges in thermal stability, flame retardancy, and electrolyte compatibility.

ZIF-67↗

Unraveling the Combined Photothermal Stability of Common Perovskite Solar Cell Compositions

In halide perovskite solar cells, certain compositions, especially those with a high mixture of anions, degrade rapidly. Here, in this study, a degradation study compares the photo (exposure to light), thermal (exposure to elevated temperatures), and photo-plus-thermal (combination) stability of three representative perovskite compositions chosen for their relatively high performance and to independently test anion versus cation effects. Based upon experience and reports, the compositions studied are triple cation with a high Br ratio (Cs 0.05 (FA 0.98 MA 0.02 ) 0.95 Pb(I 0.5 Br 0.5 ) 3 ), all iodide with a moderately high Cs ratio (FA 0.8 Cs 0.2 PbI 3 ), and FA-dominated triple cation (Cs 0.05 (FA 0.98 MA 0.02 ) 0.95 Pb(I 0.98 Br 0.02 ) 3 ). Cs 0.05 (FA 0.98 MA 0.02 ) 0.95 Pb(I 0.98 Br 0.02 ) 3 displayed the best combined photo-plus-thermal stability. Degradation mechanisms were investigated by comparing the morphology, surface composition, and bulk and interface carrier dynamics. Under the harshest aging conditions (photo-plus-thermal), phase segregation and vaporization of organic cations occurred, along with the appearance of high-energy states indicating the interaction with C 60 . The findings were verified on perovskite films blade-coated in air used in devices (FTO/NiOx/SAM/Perovskite/C 60 /BCP/Cu), achieving an efficiency of 21.9% alongside correlated stability.

14 SOLAR ENERGY↗

Alkaline Peroxide Delignification of Corn Stover

Selective biomass fractionation into carbohydrates and lignin is a key challenge in the conversion of lignocellulosic biomass to fuels and chemicals. In the present study, alkaline hydrogen peroxide (AHP) pretreatment was investigated to fractionate lignin from polysaccharides in corn stover (CS), with a particular emphasis on the fate of the lignin for subsequent valorization. The influence of peroxide loading on delignification during AHP pretreatment was examined over the range of 30-500 mg H2O2/g dry CS at 50 degrees C for 3 h. Mass balances were conducted on the solid and liquid fractions generated after pretreatment for each of the three primary components, lignin, hemicellulose, and cellulose. AHP pretreatment at 250 mg H2O2/g dry CS resulted in the pretreated solids with more than 80% delignification consequently enriching the carbohydrate fraction to >90%. Two-dimensional nuclear magnetic resonance (2D-NMR) spectroscopy of the AHP pretreated residue shows that, under high peroxide loadings (>250 mg H2O2/g dry CS), most of the side chain structures were oxidized and the aryl-ether bonds in lignin were partially cleaved, resulting in significant delignification of the pretreated residues. Gel permeation chromatography (GPC) analysis shows that AHP pretreatment effectively depolymerizes CS lignin into low molecular weight (LMW) lignin fragments in the aqueous fraction. Imaging of AHP pretreated residues shows a more granular texture and a clear lamellar pattern in secondary walls, indicative of layers of varying lignin removal or relocalization. Enzymatic hydrolysis of this pretreated residue at 20 mg/g of glucan resulted in 90% and 80% yields of glucose and xylose, respectively, after 120 h. Overall, AHP pretreatment is able to selectively remove more than 80% of the lignin from biomass in a form that has potential for downstream valorization processes and enriches the solid pulp into a highly digestible material.

09 BIOMASS FUELS↗

Cesium-Induced Active Sites for C–C Coupling and Ethanol Synthesis from CO 2 Hydrogenation on Cu/ZnO(000$\bar{1}$) Surfaces

The efficient conversion of carbon dioxide, a major air pollutant, into ethanol or higher alcohols is a big challenge in heterogeneous catalysis, generating great interest in both basic scientific research and commercial applications. Here, we report the facilitated methanol synthesis and the enabled ethanol synthesis from carbon dioxide hydrogenation on a catalyst generated by codepositing Cs and Cu on a ZnO(000$\bar{1}$) substrate. A combination of catalytic testing, X-ray photoelectron spectroscopy (XPS) measurements, and calculations based on density functional theory (DFT) and kinetic Monte Carlo (KMC) simulation was used. The results of XPS showed a clear change in the reaction mechanism when going from Cs/Cu(111) to a Cs/Cu/ZnO(000$\bar{1}$) catalyst. The Cs-promoting effect on C–C coupling is a result of a synergy among Cs, Cu, and ZnO components that leads to the presence of CH x and CH y O species on the surface. Furthermore, according to the DFT-based KMC simulations, the deposition of Cs introduces multifunctional sites with a unique structure at the Cu–Cs–ZnO interface, particularly being able to promote the interaction with CO 2 and thus the methanol synthesis predominantly via the formate pathway. More importantly, it tunes the CHO binding strongly enough to facilitate the HCOOH decomposition to CHO via the formate pathway, but weakly enough to allow further hydrogenation to methanol. The fine-tuning of CHO binding also enables a close alignment of a CHO pair to facilitate the C–C coupling and eventually ethanol synthesis. Our study opens new possibilities to allow the highly active and selective conversion of carbon dioxide to higher alcohols on widely used and low-cost Cu-based catalysts.

36 MATERIALS SCIENCE↗

Toward Improved Charge Separation through Conformational Control in Copper Coordination Complexes

The continued development of solar energy as a renewable resource necessitates the design and study of new approaches to sustaining photodriven charge separation (CS). To this end, we present a bioinspired approach in which triggered conformational changes are used to control electron transfer (ET) events. We report, photo-induced conformational rearrangements of a ligand are translated into changes in the coordination geometry and environment about a bound metal ion. Taking advantage of the differential coordination properties of Cu I and Cu II , these dynamics facilitate intramolecular ET from Cu I to the ligand to create a CS state. The synthesis and photophysical characterization of CuCl(dpaa R ) (dpaa = dipicolylaminoacetophenone, with R = H and OMe) is presented. These ligands incorporate a fluorophore into their framework that gives rise to a twisted intramolecular charge transfer (TICT) excited state. Excited state ligand twisting provides a tetragonal coordination geometry capable of capturing Cu II in the CS state when an internal ortho-OMe binding site is present (as in dpaaOMe). We employ NMR, IR, EPR, and optical spectroscopies, X-ray diffraction, and electrochemical methods to establish the ground state properties of the Cu I and Cu II complexes. We then investigate the photophysical dynamics of these Cu I complexes via time-resolved photoluminescence (TR-PL), and optical transient absorption (OTA) spectroscopies. We show that relative to controls lacking a TICT-active ligand, the lifetime of the CS state is enhanced ~1000-fold. Further, the presence of the ortho-OMe substituent greatly enhances the lifetime of the TICT* state and biases the coordination environment toward Cu II . The presence of Cu I decreases photoinduced degradation from 14 to <2% but does not result in significant quenching via ET. Factors affecting CS in these systems are discussed, laying the groundwork for our strategy toward solar energy conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Metal-Tuned Ligand Reactivity Enables CX 2 (X = O, S) Homocoupling with Spectator Cu Centers

Ligand non-innocence is ubiquitous in catalysis with ligands in synthetic complexes contributing as electron reservoirs or co-sites for substrate activation. The latter chemical non-innocence is manifested in H + storage or relay at sites beyond the metal primary coordination sphere. Reaction of a competent CO 2 -to-oxalate reduction catalyst, namely, [K(THF) 3 ](Cu 3 SL), where L 3– is a tris(β-diketiminate) cyclophane, with CS 2 affords tetrathiooxalate at long reaction times or at high CS 2 concentrations, where otherwise an equilibrium is established between the starting species and a complex–CS 2 adduct in which the CS 2 is bound to the C atom on the ligand backbone. X-ray diffraction analysis of this adduct reveals no apparent metal participation, suggesting an entirely ligand-based reaction controlled by the charge state of the cluster. Here, thermodynamic parameters for the formation of the aforementioned Cligand–CS 2 bond were experimentally determined, and trends with cation Lewis acidity were studied, where more acidic cations shift the equilibrium toward the adduct. Relevance of such an adduct in the reduction of CO 2 to oxalate by this complex is supported by DFT studies, similar effects of countercation Lewis acidity on product formation, and the homocoupled heterocumulene product speciation as determined by isotopic labeling studies. Taken together, this system extends chemical non-innocence beyond H + to effect catalytic transformations involving C–C bond formation and represents the rarest example of metal–ligand cooperativity, that is, spectator metal ion(s) and the ligand as the reaction center.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bottom-up evolution of perovskite clusters into high-activity rhodium nanoparticles toward alkaline hydrogen evolution

Self-reconstruction has been considered an efficient means to prepare efficient electrocatalysts in various energy transformation process for bond activation and breaking. However, developing nano-sized electrocatalysts through complete in-situ reconstruction with improved activity remains challenging. Herein, we report a bottom-up evolution route of electrochemically reducing Cs 3 Rh 2 I 9 halide-perovskite clusters on N-doped carbon to prepare ultrafine Rh nanoparticles (~2.2 nm) with large lattice spacings and grain boundaries. Various in-situ and ex-situ characterizations including electrochemical quartz crystal microbalance experiments elucidate the Cs and I extraction and Rh reduction during the electrochemical reduction. These Rh nanoparticles from Cs 3 Rh 2 I 9 clusters show significantly enhanced mass and area activity toward hydrogen evolution reaction in both alkaline and chlor-alkali electrolyte, superior to liquid-reduced Rh nanoparticles as well as bulk Cs 3 Rh 2 I 9 -derived Rh via top-down electro-reduction transformation. Theoretical calculations demonstrate water activation could be boosted on Cs 3 Rh 2 I 9 clusters-derived Rh nanoparticles enriched with multiply sites, thus smoothing alkaline hydrogen evolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Prediction of room-temperature half-metallicity in layered halide double perovskites

Half-metallic ferromagnets (HMFs) that possess intriguing physical properties with completely spin-polarized current are key candidates for high-efficiency spintronic devices. However, HMFs that could simultaneously have high Curie temperature ( T c ), wide half-metallic gap (Δ HM ), and large bulk magnetocrystalline anisotropy energy (MAE) are very rare, which significantly restrict their room-temperature (RT) applications. In this article, through materials screening in layered halide double perovskites (LHDPs), we have theoretically identified that Cs 4 FePb 2 Cl 12 , which has good crystallographic, dynamic and thermal stabilities, possesses an intrinsic half-metallic ground-state with a high T c ~ 450 K. Interestingly, the long-range ferromagnetic ordering in bulk Cs 4 FePb 2 Cl 12 is contributed by the strong super-superexchange interactions between the neighboring Fe d orbitals mediated by different anionic Cl p orbitals. The high T c of layered Cs 4 FePb 2 Cl 12 can be well maintained even in the monolayer limitation, i.e., T c ~ 370 K for Cs 4 FePb 2 Cl 12 monolayer, which is critical for nanoscale device applications. Moreover, both bulk and monolayer Cs 4 FePb 2 Cl 12 can exhibit wide Δ HM ~ 0.55 eV and large MAE >320 μeV/Fe, comparable to that of the best HMFs reported in the literature. Our findings can significantly extend the potentials of LHDPs for high-temperature spintronic applications.

36 MATERIALS SCIENCE↗

Correlated color temperature is not a suitable proxy for the biological potency of light

Using a simulation based on a real, five-channel tunable LED lighting system, we show that Correlated Color Temperature (CCT) is not a reasonable predictor of the biological potency of light, whether characterized with CIE melanopic Equivalent Daylight Illuminance (mel-EDI), Equivalent Melanopic Lux (EML) (a scalar multiple of mel-EDI), or Circadian Stimulus (CS). At a photopic corneal illuminance of 300 lx and Rf ≥ 70, spectra can vary in CS from 17 to 41% across CCTs from 2500 to 6000 K, and up to 23% at a single CCT, due to the choice of spectrum alone. The CS range is largest, and notably discontinuous, at a CCT of 3500 K, the location of the inflection point of the CS model. At a photopic corneal illuminance of 300 lx and Rf ≥ 70, mel-EDI can vary from 123 to 354 lx across CCTs from 2500 to 6000 K and can vary by up to 123 lx at a fixed CCT (e.g., 196 to 319 lx at 5000 K). The range of achievable mel-EDI increases as CCT increases and, on average, decreases as color fidelity, characterized with IES TM-30 Rf, increases. These data demonstrate that there is no easy mathematical conversion between CS and mel-EDI when a spectrally diverse spectra set of spectral power distributions is considered.

60 APPLIED LIFE SCIENCES↗