Search NASA⌕ Search

SEARCH · Search NASA

Results for “Data Characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Fuel cell ion-exchange membrane investigation

The present deficiencies in the fluorocarbon sulfonic acid membrane used as the solid polymer electrolyte in the H2/O2 fuel cell are studied. Considered are: Adhesives selection, elastomeric formulations, scavenger exploration, and membrane characterization. The significant data are interpreted and recommendations are given for both short and long range further investigations in two of the four major areas: membrane adhesives and membrane stabilization.

Toy, M. S.↗

Identification and Mapping of Soils, Vegetation, and Water Resources of Lynn County, Texas, by Computer Analysis of ERTS MSS Data

Results of the analysis and interpretation of ERTS multispectral data obtained over Lynn County, Texas, are presented. The test site was chosen because it embodies a variety of problems associated with the development and management of agricultural resources in the Southern Great Plains. Lynn County is one of ten counties in a larger test site centering around Lubbock, Texas. The purpose of this study is to examine the utility of ERTS data in identifying, characterizing, and mapping soils, vegetation, and water resources in this semiarid region. Successful application of multispectral remote sensing and machine-processing techniques to arid and seminarid land-management problems will provide valuable new tools for the more than one-third of the world's lands lying in arid-semiarid regions.

Baumgardner, M. F.↗

Characteristics of capacitor-type micrometeoroid flux detectors when impacted with simulated micrometeoroids

A series of impact tests are described and data presented which characterize the operation of the capacitor-type micrometeoroid flux detectors used on the Meteoroid Technology Satellite (MTS). Capacitor-type detectors with silicon dioxide dielectric thickness of 0.4 and 1.0 microns were tested in the micrometeoroid impact simulator at the Langley Research Center, a 4-MV Van de Graaff electrostatic accelerator. The carbonyl iron projectiles were from 0.5 to 5.0 microns in diameter with velocities from 4 to 10.0 km/sec. The detector bias voltage was varied from -20 to -60 V; some tests were at detector temperatures of 90 C to -100 C; and the angle of impact varied from 0 deg to 75 deg from the normal to the detector. These tests showed that: (1) the detector operation is reliable when the bias voltage is greater than 30 V; (2) after an impact the detector returns to its original condition with an insignificant loss of active area; and (3) the sensitivity of the detector is inversely proportional to the detector thickness. The test results suggest a theoretical model in which the signal is an arc triggered by the impacting projectile, and the detector bias voltage must be high enough to insure that an arc will form.

Kassel, P. C., Jr.↗

Lunar volcanism in space and time

The role of lunar volcanism in the history of the moon is documented using lunar-orbit and earth-based data along with characterizations derived from Apollo and Luna sample-return missions. Characteristics of mare and highland volcanic features are described, Apollo and Luna results are discussed, and the characteristics of other mare deposits and of other highland features of possible volcanic origin are summarized. Major conclusions are that: (1) there is little unequivocal morphologic evidence for highland volcanism, (2) lunar mare lavas appear to have originated from depths of 100 to 500 km, (3) impact melting does not appear to have been a factor in the generation of mare lavas, (4) mare volcanism was characterized by massive outpourings of very fluid volatile-poor lava analogous to terrestrial flood basalts, (5) mare volcanism took place from 3.83 to about 2.5 billion years ago, (6) the preferential occurrence of mare deposits in large impact basins appears to be generically unrelated to basin formation, and (7) a thicker farside crust may be responsible for the distinctive nearside-farside asymmetry of mare deposits.

Head, J. W., III↗

Study report on laser storage and retrieval of image data

The theoretical foundation is presented for a system of real-time nonphotographic and nonmagnetic digital laser storage and retrieval of image data. The system utilizes diffraction-limited laser focusing upon thin metal films, melting elementary holes in the metal films in laser focus. The metal films are encapsulated in rotating flexible mylar discs which act as the permanent storage carries. Equal sized holes encompass two dimensional digital ensembles of information bits which are time-sequentially (bit by bit) stored and retrieved. The bits possess the smallest possible size, defined by the Rayleigh criterion of coherent physical optics. Space and time invariant reflective read-out of laser discs with a small laser, provides access to the stored digital information. By eliminating photographic and magnetic data processing, which characterize the previous state of the art, photographic grain, diffusion, and gamma-distortion do not exist. Similarly, magnetic domain structures, magnetic gaps, and magnetic read-out are absent with a digital laser disc system.

Becker, C. H.↗

Consideration of sample return and the exploration strategy for Mars

The scientific rationale and requirements for a Mars surface sample return were examined and the experience gained from the analysis and study of the returned lunar samples were incorporated into the science requirements and engineering design for the Mars sample return mission. The necessary data sets for characterizing Mars are presented. If further analyses of surface samples are to be made, the best available method is for the analysis to be conducted in terrestrial laboratories.

Bogard, D. C.↗

Principal component analysis of solar flares in the soft X-ray flux

The paper considers principal component analysis of solar flares in the soft X-ray flux, a technique for extracting the salient features from a mass of data. The method applies particularly to the analysis of nonstationary ensembles, and its computations require the evaluation of eigenvalues of matrices. The Eispack matrix eigen system routines were used to analyze full-disk proportional-counter data from the X-ray event analyzer which was part of the Skylab experiment. Empirical orthogonal functions were derived for events in the soft X-ray spectrum between 2.5 and 20 A during different time periods, indicating that about 90% of the cumulative power of each analyzed flare is contained in the largest eigenvector. The first two largest eigenvectors are sufficient for an empirical curve fit through the raw data and a characterization of solar flares in the soft X-ray flux, and power spectra of two largest eigenvectors reveal a reported periodicity of about 5 min.

Teuber, D. L.↗

Whistlers

Theoretical models of ionospheric whistler phenomena are reviewed and compared with experimental data. Whistlers were characterized as lightning discharges through a dispersive medium in 1919, with the first observed appearance of whistler noises detected in telephone communications. Magneto-ionic theory is used to characterize whistlers, with the Appleton-Hartree equations applied to the wave fields arising from lightning interactions with ionospheric plasma. Large values of the refractive index or slow propagation speeds give rise to the whistler mode, i.e., propagation of the wave through plasmas of any density. Propagation through the ionosphere is examined with the Snell's law, and account is taken of absorption and the necessity of obtaining full-wave solutions. Finally, theories are under development to explain the occurrence of ducting, i.e., guiding of the whistler wave by field-aligned plasma density irregularities.

Park, C. G.↗

Color measurement and discrimination

The present investigation is concerned with new results which show that for test lights with slow temporal modulations, and thus little effect on the luminance system, the vector-difference hypothesis represents an adequate characterization of discrimination data. It is pointed out that for certain experimental conditions color measurements can be successfully extended to include a difference measure which predicts the discriminability of pairs of lights. When discrimination depends principally on opponent-channel responses, discrimination thresholds can be predicted from the detection contour alone. Attention is given to discriminations with a 6-Hz Gabor function, the categorization of stimulus regions, and the nature of the visual mechanisms.

Wandell, B. A.↗

An attribute-driven statistics generator for use in a G.I.S. environment

When performing research using digital geographic information it is often useful to produce quantitative characterizations of the data, usually within some constraints. In the research environment the different combinations of required data and constraints can often become quite complex. This paper describes a technique that gives the researcher a powerful and flexible way to set up many possible combinations of data and constraints without having to perform numerous intermediate steps or create temporary data bands. This method provides an efficient way to produce descriptive statistics in such situations.

Thomas, R. W.↗

Earth resources instrumentation for the Space Station Polar Platform

The spacecraft and payloads of the Space Station Polar Platform program are described in a brief overview. Present plans call for one platform in a descending morning-equator-crossing orbit at 824 km and two or three platforms in ascending afternoon-crossing orbits at 542-824 km. The components of the NASA Earth Observing System (EOS) and NOAA payloads are listed in tables and briefly characterized, and data-distribution requirements and the mission development schedule are discussed. A drawing of the platform, a graph showing the spectral coverage of the EOS instruments, and a glossary of acronyms are provided.

Donohoe, Martin J.↗

Alkaline fuel cell performance investigation

An exploratory experimental fuel cell test program was conducted to investigate the performance characteristics of alkaline laboratory research electrodes. The objective of this work was to establish the effect of temperature, pressure, and concentration upon performance and evaluate candidate cathode configurations having the potential for improved performance. The performance characterization tests provided data to empirically establish the effect of temperature, pressure, and concentration upon performance for cell temperatures up to 300 F and reactant pressures up to 200 psia. Evaluation of five gold alloy cathode catalysts revealed that three doped gold alloys had more that two times the surface areas of reference cathodes and therefore offered the best potential for improved performance.

Martin, R. E.↗

Long-term changes in reflectivity and large scale motions in the atmosphere of Jupiter and Saturn

A systematic photographic program, utilizing broad-band UV, blue, green, red and near IR pass-bands were carried out at the 60 cm. Tortugas Mountain Telescope. This is part of an ongoing program that spans two Jovian years (25 yrs). The purpose of this program is to provide an ongoing database to characterize high resolution data from spacecraft and earth-orbiting observatories. The standard observing program was maintained and support was given to other investigators who are carrying out complementary observing programs. The general aspect of the cloud decks were monitored, and reveal an interval that shows little variation in the general aspect of the clouddeck of Jupiter since 1981, when the North Temperature Belt darkened. A charge coupled device (CCD) camera was adapted for low cost operation, utilizing an IBM-AT clone for data acquisition. An RCA frame grabber was modified for encoding the archival images.

Beebe, Reta↗

Oblique hypervelocity impact response of dual-sheet structures

The results of a continuing investigation of the phenomena associated with the oblique hypervelocity impact of spherical projectiles onto multi-sheet aluminum structures are given. A series of equations that quantitatively describes these phenomena is obtained through a regression of experimental data. These equations characterize observed ricochet and penetration damage phenomena in a multi-sheet structure as functions of geometric parameters of the structure and the diameter, obliquity, and velocity of the impacting projectile. Crater damage observed on the ricochet witness plates is used to determine the sizes and speeds of the ricochet debris particles that caused the damage. It is observed that the diameter of the most damaging ricochet debris particle can be as large as 40 percent of the original particle diameter and can travel at speeds between 24 percent and 36 percent of the original projectile impact velocity. The equations necessary for the design of shielding panels that will protect external systems from such ricochet debris damage are also developed. The dimensions of these shielding panels are shown to be strongly dependent on their inclination and on their circumferential distribution around the spacecraft.

Schonberg, William P.↗

Further investigations of oblique hypervelocity impact phenomena

The results of a continuing investigation of the phenomena associated with the oblique hypervelocity impact of spherical projectiles onto multi-sheet aluminum structures are described. A series of equations that quantitatively describes these phenomena is obtained through a regression of experimental data. These equations characterize observed ricoshet and penetration damage phenomena in a multi-sheet structure as functions of the geometric parameters of the structure and the diameter, obliquity, and velocity of the impacting projectile. Crater damage observed on the ricochet witness plates is used to determine the sizes and speeds of the ricochet debris particles that caused the damage. It is shown that, in general, the most damaging ricochet debris particle is approximately 0.25 cm (0.10 in) in diameter and travels at the speed of approximately 2.1 km/sec (6,890 ft/sec). The equations necessary for the design of shielding panels that will protect external systems from such ricochet debris damage are also developed. The dimensions of these shielding panels are shown to be strongly dependent on their inclination and on their circumferential distribution around the spacecraft. It is concluded that obliquity effects of high-speed impacts must be considered in the design of any structure exposed to the meteoroid and space debris environment.

Schonberg, William P.↗

Alkaline fuel cell performance investigation

An exploratory experimental fuel cell test program was conducted to investigate the performance characteristics of alkaline laboratory research electrodes. The objective of this work was to establish the effect of temperature, pressure, and concentration upon performance and evaluate candidate cathode configurations having the potential for improved performance. The performance characterization tests provided data to empirically establish the effect of temperature, pressure, and concentration upon performance for cell temperatures up to 300 F and reactant pressures up to 200 psia. Evaluation of five gold alloy cathode catalysts revealed that three doped gold alloys had more than two times the surface areas of reference cathodes and therefore offered the best potential for improved performance.

Martin, R. E.↗

Radioisotope powered alkali metal thermoelectric converter design for space systems

The design concept of an alkali-metal thermoelectric converter (AMTEC) for 15-30-percent-efficient conversion of heat from the General Purpose (radioisotope) Heat Source (GPHS) on spacecraft is presented. The basic physical principles of the conversion cycle are outlined; a theoretical model is derived; a modular design is described and illustrated with drawings; and the overall AMTEC/GPHS system design is characterized. Predicted performance data are presented in extensive tables and graphs and discussed in detail.

Sievers, R. K.↗

Proposed acceptance, qualification, and characterization tests for thin-film PV modules

Details of a proposed test program for PV thin-film modules which the Department of Energy has directed the Solar Energy Research Institute (SERI) to prepare are presented. Results of one of the characterization tests that SERI has performed are also presented. The objective is to establish a common approach to testing modules that will be acceptable to both users and manufacturers. The tests include acceptance, qualification, and characterization tests. Acceptance tests verify that randomly selected modules have similar characteristics. Qualification tests are based on accelerated test methods designed to simulate adverse conditions. Characterization tests provide data on performance in a predefined environment.

Waddington, D.↗