Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC FUSION ENERGY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Wave-Driven Rotation In Centrifugal Mirrors

Centrifugal mirrors use supersonic rotation to provide axial confinement and enhanced stability. Usually the rotation is produced using electrodes, but these electrodes have limited the rotation to the Alfven critical ionization velocity, which is too slow to be useful for fusion. Instead, the rotation could be produced using radio frequency waves. A fixed azimuthal ripple is a simple and efficient wave that could produce rotation by harnessing alpha particle energy. This is an extension of the alpha channeling effect. The alpha particle power and efficiency in a simulated devices is sufficient to produce rotation without external energy input. By eliminating the need for electrodes, this opens new opportunities for centrifugal traps.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma heating technology

The operational environment for plasma heating systems presents unprecedented challenges for the success of magnetic fusion. This chapter discusses the current state of ion cyclotron and electron cyclotron heating systems and the research and development priorities needed to establish working solutions for these systems. While much progress has been made, there is much more work to be done to make fusion energy commercially viable. Research and development priorities include radiation-resistant structural and plasma facing materials, advanced manufacturing methods, new cooling methods, first-wall integrated actuators, improvements in power source efficiency, higher frequency gyrotrons, and improved overall system reliability.

Caughman, John↗

Gyro-fluid and two-fluid theory and simulations of edge-localized-modes

This paper reports on the theoretical and simulation results of a gyro-Landau-fluid extension of the BOUT++ code, which contributes to increasing the physics understanding of edge-localized-modes (ELMs). Large ELMs with low-to-intermediate-n peeling-ballooning (P-B) modes are significantly suppressed due to finite Larmor radius (FLR) effects when the ion temperature increases. For type-I ELMs, it is found from linear simulations that retaining complete first order FLR corrections as resulting from the incomplete “gyroviscous cancellation” in Braginskii's two-fluid model is necessary to obtain good agreement with gyro-fluid results for high ion temperature cases (T{sub i}≽3 keV) when the ion density has a strong radial variation, which goes beyond the simple local model of ion diamagnetic stabilization of ideal ballooning modes. The maximum growth rate is inversely proportional to T{sub i} because the FLR effect is proportional to T{sub i}. The FLR effect is also proportional to toroidal mode number n, so for high n cases, the P-B mode is stabilized by FLR effects. Nonlinear gyro-fluid simulations show results that are similar to those from the two-fluid model, namely that the P-B modes trigger magnetic reconnection, which drives the collapse of the pedestal pressure. Due to the additional FLR-corrected nonlinear E × B convection of the ion gyro-center density, for a ballooning-dominated equilibrium the gyro-fluid model further limits the radial spreading of ELMs. In six-field two fluid simulations, the parallel thermal diffusivity is found to prevent the ELM encroachment further into core plasmas and therefore leads to steady state L-mode profiles. The simulation results show that most energy is lost via ion channel during an ELM event, followed by particle loss and electron energy loss. Because edge plasmas have significant spatial inhomogeneities and complicated boundary conditions, we have developed a fast non-Fourier method for the computation of Landau-fluid closure terms based on an accurate and tunable approximation. The accuracy and the fast computational scaling of the method have been demonstrated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High-Energy Ions from Near-Critical Density Plasmas via Magnetic Vortex Acceleration

Ultraintense laser pulses propagating in near-critical density plasmas generate magnetic dipole vortex structures. In the region of decreasing plasma density, the vortex expands both in forward and lateral directions. The magnetic field pressure pushes electrons and ions to form a density jump along the vortex axis and induces a longitudinal electric field. This structure moves together with the expanding dipole vortex. The background ions located ahead of the electric field are accelerated to high energies. The energy scaling of ions generated by this magnetic vortex acceleration mechanism is derived and corroborated using particle-in-cell simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulation of Alpha Particles in Rotating Plasma Interacting with a Stationary Ripple

Superthermal ExB rotation can provide magnetohydrodynamic (MHD) stability and enhanced confinement to axisymmetric mirrors. However, the rotation speed has been limited by phenomena at end electrodes. A new prediction is that rotation might instead be produced using a magnetic ripple and alpha particle kinetic energy, in an extension of the alpha channeling concept. The interaction of alpha particles with the ripple results in visually interesting and practically useful orbits.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ignition and Burn in a Hybrid Nuclear Fuel for a Pulsed Rocket Engine

This work explores the parameter space of a cylindrical hybrid nuclear fuel in support of a z-pinch driven pulsed fission-fusion (PuFF) engine. 0D power balance and 1D burn wave calculations have been performed to explore the parameter space of hybrid cylindrical nuclear fuels. The boundary of minimal initial conditions needed to reach breakeven are found within the context of the model. The effects of initial conditions upon the yield at the end of burn wave expansion are also determined. The model is used to examine the minimum initial energies predicted to result in yields of a few MJ. The goal of this work is to guide fuel design, inform future models and experiments as well as look for the most efficient parameter space for ignition in a z-pinch driven hybrid nuclear reaction. The impact of initial parameters upon ignition, burn, and gain are discussed. It is found that a hybrid cylindrical target may breakeven with initial energy near the axis of approximately 4 to 6 MJ in lithium deuteride/uranium 235 fuel. It is also found that magnetic field can lower the threshold further of which the magnitude changes across the parameter space. The dual fusion/fission reactions are found to boost each other leading to lower initial driving energies needed to reach breakeven in the hybrid cylindrical nuclear fuel.

fission↗

Energy transport in magnetized laser plasmas

We present the first volumetric measurements of magnetic field, density, and temperature in laser-produced plasmas and shock waves. The results were obtained in one of the only rep-rated (1 Hz) HED experiment currently operating.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Physics of Zonal Flow-Drift Wave Turbulence Interactions: A Synthesis of Time-domain, Fourier Domain, and Direct Visualization Studies

The nonlinear interaction between drift turbulence and zonal flows plays a key role in determining the turbulence amplitude, spatiotemporal scale and subsequent transport and is therefore of significant interest in magnetic fusion research. We summarize multipoint time-domain probe studies, frequency-domain studies, and direct visualization studies of this important process. The fluctuation-induced Reynolds stress is shown to be consistent with the observed shear flow; spatially resolved direct measurement of nonlinear exchange of energy between drift fluctuations and zonal flows and direct imaging show how the drift instability generates isotropic vortex structures which then propagate outwards towards the zonal flow shear layer, where they are stretched and thinned, and then incorporated into the shear layer, thereby maintaining it against damping mechanisms. The drift fluctuation-zonal flow nonlinear interactions, shearing rate, and cross-field transport are consistent with a critical gradient transport model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Reconstructing 3D asymmetries in laser-direct-drive implosions on OMEGA

Three-dimensional reconstruction algorithms have been developed which determine the hot-spot velocity, hot-spot apparent ion temperature distribution, and fuel areal density distribution present in laser-direct-drive inertial con finement fusion implosions on the OMEGA laser. These reconstructions rely on multiple independent measurements of the neutron energy spectrum emitted from the fusing plasma. Measurements of the neutron energy spectrum on OMEGA are made using a suite of quasi-orthogonal neutron time-of-flight detectors and a magnetic recoil spectrometer. These spectrometers are positioned strategically around the OMEGA target chamber to provide unique 3-D measurements of the conditions of the fusing hot spot and compressed fuel near peak compression. Here, the uncertainties involved in these 3-D reconstructions are discussed and are used to identify a new nTOF diagnostic line of sight which when built will reduce the uncertainty in the hot-spot apparent ion temperature distribution from 0.7 to < 0.4 keV.

47 OTHER INSTRUMENTATION↗

Results of Ion Cyclotron Heating Experiments on Proto-MPEX Utilizing a Movable Stainless Steel Target

Ion cyclotron heating (ICH) at a frequency in the 6- to 9-MHz range with electron heating in the 28- to 105-GHz range will be used in the Material Plasma Exposure eXperiment (MPEX) to greatly increase the energy of the plasma stream produced by the helicon plasma source. ICH was chosen over substrate biasing to produce energetic ions because it can more accurately reproduce plasma-material interactions in a fusion device. For instance, when the target is tilted with respect to the background magnetic field during ICH, a magnetic presheath is created so that redeposition phenomena as in a tokamak divertor can be better approximated. ICH experiments were conducted on the Proto-MPEX device, which was developed to provide a physics basis upon which MPEX is designed. In this paper we describe some of these experiments in which the previous fixed graphite target was replaced by a movable stainless steel target. With the new target, the strong, monotonic decrease in ion temperature observed previously as a function of axial distance between the ion cyclotron resonance region and the target was not observed. Instead, only a small drop was seen within ~1 cm of the target. The ion temperatures were determined spectroscopically, utilizing Doppler broadening measurements of an Ar II line, in a plasma that is 90% deuterium and 10% argon. Measurements were obtained using optical fibers at a fixed location, with the target moving perpendicularly relative to the viewing chords. Comparisons with previous results will be discussed, including observed plasma parameters Ti, Te, and ne, and heat flux at the target.

Goulding, Richard↗

Technology readiness assessment of magnetohydrodynamic stability control

The technology readiness level scale is revised with clear definitions for magnetohydrodynamic stability control technologies for magnetic confinement fusion. The definitions are in the form of a sentence with three dimensions, which are the system complexity, the test environment, and the cost. A clear and simple definition is sought after to make an assessment based on the evidence which is agreeable to the fusion energy development community. A sample technology readiness assessment (TRA) for the electron cyclotron current drive-based control of neoclassical tearing mode for ST Advanced Reactor, using the proposed scale, reveals that the risk of a TRA being misinterpreted is high, which can only be avoided with an understanding of the procedure described in this paper.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Feasibility Studies of Alpha-Channeling in Mirror Machines

The linear magnetic trap is an attractive concept both for fusion reactors and for other plasma applications due to its relative engineering simplicity and high-beta operation. Applying the α- channeling technique to linear traps, such as mirror machines, can benefit this concept by efficiently redirecting α particle energy to fuel ion heating or by otherwise sustaining plasma confinement, thus increasing the effective fusion reactivity. To identify waves suitable for α-channeling a rough optimization of the energy extraction rate with respect to the wave parameters is performed. After the optimal regime is identified, a systematic search for modes with similar parameters in mirror plasmas is performed, assuming quasi-longitudinal or quasi-transverse wave propagation. Several modes suitable for α particle energy extraction are identified for both reactor designs and for proof- of-principle experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spectroscopy of diagnostically important magnetic-dipole lines in highly charged 3d{sup n} ions of tungsten

An electron-beam ion trap (EBIT) is used to measure extreme ultraviolet spectra between 10 and 25 nm from highly charged ions of tungsten with an open 3d shell (W xlviii through W lvi). We found that almost all strong lines are due to the forbidden magnetic-dipole (M1) transitions within 3d{sup n} ground configurations. A total of 37 previously unknown spectral lines are identified using detailed collisional-radiative (CR) modeling of the EBIT spectra. A level-merging scheme for compactification of rate equations is described. The CR simulations for Maxwellian plasmas show that several line ratios involving these M1 lines can be used to reliably diagnose temperature and density in hot fusion devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Proton imaging of high-energy-density laboratory plasmas

Proton imaging has become a key diagnostic for measuring electromagnetic fields in high-energy-density (HED) laboratory plasmas. Compared to other techniques for diagnosing fields, proton imaging is a measurement that can simultaneously offer high spatial and temporal resolution and the ability to distinguish between electric and magnetic fields without the protons perturbing the plasma of interest. Consequently, proton imaging has been used in a wide range of HED experiments, from inertial-confinement fusion to laboratory astrophysics. An overview is provided on the state of the art of proton imaging, including a discussion of experimental considerations like proton sources and detectors, the theory of proton-imaging analysis, and a survey of experimental results demonstrating the breadth of applications. As a result, topics at the frontiers of proton-imaging development are also described, along with an outlook on the future of the field.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fusion Energy Sciences FY 2017 Joint Research Target (JRT) Summary Milestone Report

In support of the 2017 JRT, the DIII-D, NSTX-U and C-Mod teams performed coordinated research, focused on the subjects of dissipative divertor physics and divertor heat flux footprints. As evident in this report, good progress was made on many fronts toward assembling informed pictures of the plasma physics. The teams chose research topics that would best utilize the unique capabilities of DIII-D, NSTX and C-Mod – access to interesting divertor magnetic configurations and geometries, excellent diagnostic sets and extended parameter regimes. The research took advantage of dedicated experimental investigations on DIII-D and archived data analyses from NSTX and C-Mod – all targeted to address keys questions for tokamak power exhaust handling. DIII-D dedicated significant run time to support the 2017 JRT. This included coordinated experiments to investigate an NSTX-like, high flux expansion divertor configuration to compare its detachment response to that seen in NSTX. DIII-D implemented divertor diagnostic upgrades as well and operated with a ‘small angle slot’ divertor to investigate this ‘closed’ divertor configuration. Follow-on experiments are planned to utilize these tools. Analysis of archived data from NSTX and C-Mod was designed to exploit the wealth of information that had been collected during prior experimental campaigns. These investigations included the influence of high poloidal flux expansion on detachment onset (NSTX), magnetic flux balance dependencies of the power exhaust footprints (NSTX and C-Mod), power exhaust channel widths at poloidal magnetic fields greater than 1 Tesla, in the I-mode confinement regime and in response to divertor nitrogen seeding (C-Mod).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Mass dependency of turbulent parameters in stationary glow discharge plasmas

A direct current glow discharge tube is used to determine how mass changes the effects of certain turbulence characteristics in a weakly ionized gas. Helium, neon, argon, and krypton plasmas were created, and an axial magnetic field, varied from 0.0 to 550.0 Gauss, was used to enhance mass dependent properties of turbulence. From the power spectra of light emission variations associated with velocity fluctuations, determination of mass dependency on turbulent characteristic unstable modes, energy associated with turbulence, and the rate at which energy is transferred from scale to scale are measured. The magnetic field strength is found to be too weak to overcome particle diffusion to the walls to affect the turbulence in all four types of plasmas, though mass dependency is still detected. Though the total energy and the rate at which the energy moves between scales are mass invariant, the amplitude of the instability modes that characterize each plasma are dependent on mass.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characterization of an electrothermal plasma source for fusion transient simulations

The realization of fusion energy requires materials that can withstand high heat and particle fluxes at the plasma material interface. Here in this work, an electrothermal (ET) plasma source has been designed as a transient heat flux source for a linear plasma material interaction device. An ET plasma source operates in the ablative arc regime driven by a DC capacitive discharge. The current channel width is defined by the 4 mm bore of a boron nitride liner. At large plasma currents, the arc impacts the liner wall, leading to high particle and heat fluxes to the liner material, which subsequently ablates and ionizes. This results in a high density plasma with a large unidirectional bulk flow out of the source exit. The pulse length for the ET source has been optimized using a pulse forming network to have durations of 1 and 2 ms. The peak currents and maximum source energies seen in this system are 1.9 kA and 1.2 kJ for the 2 ms pulse and 3.2 kA and 2.1 kJ for the 1 ms pulse, respectively. This work is a proof of the principal project to show that an ET source produces electron densities and heat fluxes comparable to those anticipated in transient events in large future magnetic confinement fusion devices. Heat flux, plasma temperature, and plasma density were determined for each shot using infrared imaging and optical spectroscopy techniques. This paper will discuss the assumptions, methods, and results of the experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simple Model of the (alpha)(omega) Dynamo: Self-Excited Spheromaks

The astrophysical {alpha}{omega} dynamo converting angular momentum to magnetic energy can be interpreted as a self-excited Faraday dynamo together with magnetic relaxation coupling the dynamo poloidal field to the toroidal field produced by dynamo currents. Since both toroidal and poloidal fields are involved, the system can be modeled as helicity creation and transport, in a spheromak plasma configuration in quasi-equilibrium on the time scale of changes in magnetic energy. Neutral beams or plasma gun injection across field lines could create self-excited spheromaks in the laboratory.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗