Search NASA⌕ Search

SEARCH · Search NASA

Results for “MONOCRYSTALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Transport signatures of percolation and electronic phase homogeneity in La{sub 1-x}Sr{sub x}CoO{sub 3} single crystals.

The influence of nanoscopic magnetoelectronic phase separation on electrical transport in La{sub 1-x}Sr{sub x}CoO{sub 3} crystals is reported. It is demonstrated; (i) that the T=0 metal-insulator transition can be quantitatively understood using double exchange-modified percolation theory, and, (ii) that the onset of a phase-pure low T ferromagnetic state at high x has a profound effect on the high T transport due to a crossover in the nature of the spin fluctuations. It is concluded that many features of the transport in La{sub 1-x}Sr{sub x}CoO{sub 3} can be thoroughly understood based on our current understanding of the phase-separated state.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ferrimagnetism in epitaxially grown Mn{sub 2}VAl Heusler alloy investigated by means of soft x-ray magnetic circular dichroism

Epitaxially grown Mn{sub 2}VAl films were fabricated on MgO (001) single crystalline substrates by using a sputtering technique. The resulting Mn{sub 2}VAl films with substrate temperatures of T{sub s}=500 and 600 deg. C showed an L2{sub 1}-ordered structure. The saturation magnetization was 150 emu/cm{sup 3} at 300 K for a sample with T{sub s}=600 deg. C. Ferrimagnetic coupling between the Mn and V magnetic moments in the L2{sub 1}-Mn{sub 2}VAl film was clearly demonstrated by soft x-ray magnetic circular dichroism. In previous studies, this coupling was found only in polycrystalline bulk samples examined by nuclear magnetic resonance.

36 MATERIALS SCIENCE↗

X-ray excited luminescence of cuprous iodide single crystals: On the nature of red luminescence

The x-ray excited luminescence spectra of different quality CuI crystals were measured. The prevailing blue luminescence and the unusual red luminescence were found at the same time. The relative intensity of these two luminescence peaks was different because of the change of defect concentration in crystals. By comparing the spectra of CuI crystals before and after annealing in vacuum, air or iodine vapors, the origin of the red luminescence in the as-grown crystals was ascribed to the presence of iodine vacancy, as confirmed by the energy dispersive x-ray analysis.

36 MATERIALS SCIENCE↗

Investigation of the internal electric field in cadmium zinc telluride detectors using the Pockels effect and the analysis of charge transients

The Pockels electro-optic effect can be used to investigate the internal electric field in cadmium zinc telluride (CZT) single crystals that are used to fabricate room temperature x and gamma radiation detectors. An agreement is found between the electric field mapping obtained from Pockels effect images and the measurements of charge transients generated by alpha particles. The Pockels effect images of a CZT detector along two mutually perpendicular directions are used to optimize the detector response in a dual anode configuration, a device in which the symmetry of the internal electric field with respect to the anode strips is of critical importance. The Pockels effect is also used to map the electric field in a CZT detector with dual anodes and an attempt is made to find a correlation with the simulated electric potential in such detectors. Finally, the stress-induced birefringence effects seen in the Pockels images are presented and discussed.

36 MATERIALS SCIENCE↗

Heteroepitaxial growth of SnO{sub 2} thin films on SrTiO{sub 3} (111) single crystal substrate by laser molecular beam epitaxy

SnO{sub 2} films with a thickness around 150 nm were deposited on the (111) surface of a SrTiO{sub 3} single crystal substrate by laser molecular beam epitaxy technique in a temperature range 600-750 deg. C and oxygen pressure from 10{sup -3} to 1 Pa, respectively. The growth behavior was in situ monitored by reflection high-energy electron diffraction, and the epitaxial relations were further investigated by ex situ x-ray diffraction measurement in different geometries. All the films were confirmed to be highly (200) oriented showing good crystalline quality, despite the large lattice mismatch between SnO{sub 2} and SrTiO{sub 3}. Based on the crystallographic model and structure analysis, six equivalent directions in the SrTiO{sub 3} (111) surface for the nucleation of SnO{sub 2} were discovered, which confirmed the existence of sixfold symmetrical domains in the SnO{sub 2} epilayer. Additionally, the optical dielectric function of the SnO{sub 2}/SrTiO{sub 3} epitaxial film was simulated by the Tauc-Lorentz-Drude model in the UV-vis-NIR region.

36 MATERIALS SCIENCE↗

Growth of Bi doped cadmium zinc telluride single crystals by Bridgman oscillation method and its structural, optical, and electrical analyses

The II-VI compound semiconductor cadmium zinc telluride (CZT) is very useful for room temperature radiation detection applications. In the present research, we have successfully grown Bi doped CZT single crystals with two different zinc concentrations (8 and 14 at. %) by the Bridgman oscillation method, in which one experiment has been carried out with a platinum (Pt) tube as the ampoule support. Pt also acts as a cold finger and reduces the growth velocity and enhances crystalline perfection. The grown single crystals have been studied with different analysis methods. The stoichiometry was confirmed by energy dispersive by x-ray and inductively coupled plasma mass spectroscopy analyses and it was found there is no incorporation of impurities in the grown crystal. The presence of Cd and Te vacancies was determined by cathodoluminescence studies. Electrical properties were assessed by I-V analysis and indicated higher resistive value (8.53x10{sup 8} {Omega} cm) for the crystal grown with higher zinc concentration (with Cd excess) compare to the other (3.71x10{sup 5} {Omega} cm).

36 MATERIALS SCIENCE↗

Chemical vapor deposition diamond based multilayered radiation detector: Physical analysis of detection properties

Recently, solid state photovoltaic Schottky diodes, able to detect ionizing radiation, in particular, x-ray and ultraviolet radiation, have been developed at the University of Rome 'Tor Vergata'. We report on a physical and electrical properties analysis of the device and a detailed study of its detection capabilities as determined by its electrical properties. The design of the device is based on a metal/nominally intrinsic/p-type diamond layered structure obtained by microwave plasma chemical vapor deposition of homoepitaxial single crystal diamond followed by thermal evaporation of a metallic contact. The device can operate in an unbiased mode by using the built-in potential arising from the electrode-diamond junction. We compare the expected response of the device to photons of various energies calculated through Monte Carlo simulation with experimental data collected in a well controlled experimental setup i.e., monochromatic high flux x-ray beams from 6 to 20 keV, available at the Diamond Light Source synchrotron in Harwell (U.K.).

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The effect of temperature on the secondary electron emission yield from single crystal and polycrystalline diamond surfaces

The effect of temperature in the 293-473 K range, on the secondary electron emission (SEE) yield of single crystal and polycrystalline diamond film surfaces is reported. For the polycrystalline films the SEE yield was found to decay as function of electron irradiation dose while for the single crystal an increase occurs first, followed by a decrease. For both surfaces, the SEE yield increases significantly upon heating and obtained a nearly constant value with electron dose at 473 K. These effects are explained as due to the temperature dependence of the electron beam induced hydrogen desorption and surface band bending.

36 MATERIALS SCIENCE↗

Nanocrystalline graphite: Promising material for high current field emission cathodes

Electron field emission properties of nanocrystalline graphite (NCG) films, grown by plasma enhanced chemical vapor deposition method on conductive Si substrates without using of any catalyst, were investigated. Current-voltage characteristics were measured in pulse-periodic regime. It was shown that grown NCG films can operate at field emission current density up to 10 A/cm{sup 2}. It was found that NCG films contain, along with the normally oriented to the substrate nanoflakes, carbon whiskers consisted of graphene nanoribbons and nanowires with length considerably higher than of the nanoflakes.

36 MATERIALS SCIENCE↗

Damping mechanisms in alumina borate whisker-reinforced-aluminum matrix composites with or without SnO{sub 2} coatings

SnO{sub 2} was successfully coated on the surface of alumina borate whiskers. The pure aluminum matrix composites reinforced with a SnO{sub 2}-coated alumina borate whisker were fabricated by squeeze casting. The effects of coating contents on the damping properties of the coated composites at various temperatures, frequencies, and strain amplitudes were examined. The microstructures of the coated composites were also investigated through transmission electron microscopy observations. These results indicate that the introduction of Sn at the interface between whisker and matrix in the coated composites during the squeeze casting process alters not only the interface structures but also the dislocation status of the matrices in the vicinity of the interface. The results of damping characterization indicate that the damping capacities of the coated composites strongly depend on the coating contents and strain amplitudes. A damping peak at low temperatures appeared not only in the coated composites but also in the noncoated one, which is related to dislocation motion and interfacial slip caused by Sn. A damping peak at high temperatures appeared only in the coated composites, and the damping mechanisms at high temperature change with the increase in strain amplitudes. Sn played an important role on the damping mechanisms of the coated composites all along.

36 MATERIALS SCIENCE↗

Piezoelectric accelerometers for ultrahigh temperature application

High temperature sensors are of major importance to aerospace and energy related industries. In this letter, a high temperature monolithic compression-mode piezoelectric accelerometer was fabricated using YCa{sub 4}O(BO{sub 3}){sub 3} (YCOB) single crystals. The performance of the sensor was tested as function of temperature up to 1000 deg. C and over a frequency range of 100-600 Hz. The accelerometer prototype was found to possess sensitivity of 2.4+-0.4 pC/g, across the measured temperature and frequency range, indicating a low temperature coefficient. Furthermore, the sensor exhibited good stability over an extended dwell time at 900 deg. C, demonstrating that YCOB piezoelectric accelerometers are promising candidates for high temperature sensing applications.

36 MATERIALS SCIENCE↗

Ultrahigh vacuum/high-pressure flow reactor for surface x-ray diffraction and grazing incidence small angle x-ray scattering studies close to conditions for industrial catalysis

A versatile instrument for the in situ study of catalyst surfaces by surface x-ray diffraction and grazing incidence small angle x-ray scattering in a 13 ml flow reactor combined with reaction product analysis by mass spectrometry has been developed. The instrument bridges the so-called ''pressure gap'' and ''materials gap'' at the same time, within one experimental setup. It allows for the preparation and study of catalytically active single crystal surfaces and is also equipped with an evaporator for the deposition of thin, pure metal films, necessary for the formation of small metal particles on oxide supports. Reactions can be studied in flow mode and batch mode in a pressure range of 100-1200 mbar and temperatures up to 950 K. The setup provides a unique combination of sample preparation, characterization, and in situ experiments where the structure and reactivity of both single crystals and supported nanoparticles can be simultaneously determined.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Shock-induced spall in copper: the effects of anisotropy, temperature, loading pulse and defect

Shock-induced spall in Cu is investigated with molecular dynamics simulations. We examine spallation in initially perfect crystals and defective solids with grain boundaries (columnar bicrystals), stacking faults or vacancies, as well as the effect of temperature and loading pulses. Spall in single crystal Cu is anisotropic, and defects and high temperature may reduce the spall strength. Taylor-wave (triangular shock-release wave) loading is explored in comparison with square wave shock loading.

36 MATERIALS SCIENCE↗

Shock Driven Twinning in Tantalum Single Crystals

Recovery based observations of high pressure material behavior generated under high explosively driven flyer based loading conditions are reported. Two shock pressures, 25, and 55 GPa and four orientations {l_brace}(100), (110), (111), (123){r_brace} were considered. Recovered material was characterized using electron backscatter diffraction along with a limited amount of transmission electron microscopy to assess the occurrence of twinning under each test condition. Material recovered from 25 GPa had a very small fraction of twinning for the (100), (110), and (111) oriented crystals while a more noticeable fraction of the (123) oriented crystal was twinned. Material recovered from 55 GPa showed little twinning for (100) orientation slightly more for the (111) orientation and a large area fraction for the (123) orientation. The EBSD and TEM observations of the underlying deformation substructure are rationalized by comparing with previous static and dynamic results.

36 MATERIALS SCIENCE↗

Molecular shock response of explosives: electronic absorption spectroscopy

Electronic absorption spectroscopy in the range 400-800 nm was coupled to ultrafast laser generated shocks to begin addressing the question of the extent to which electronic excitations are involved in shock induced reactions. Data are presented on shocked polymethylmethacrylate (PMMA) thin films and single crystal pentaerythritol tetranitrate (PETN). Shocked PMMA exhibited thin film interference effects from the shock front. Shocked PETN exhibited interference from the shock front as well as broadband increased absorption. Relation to shock initiation hypotheses and the need for time dependent absorption data (future experiments) is briefly discussed.

36 MATERIALS SCIENCE↗

MBE Growth of GaAs Whiskers on Si Nanowires

We present the growth of GaAs nanowhiskers by molecular beam epitaxy on Si (111) nanowires grown by low-pressure chemical vapor deposition. The whiskers grow in the wurtzite phase, along the [0001] direction, on the {l_brace}112{r_brace} facets of the Si nanowire, forming a star-like six-fold radial symmetry. The photoluminescence shows a 30 meV blue shift with respect to bulk GaAs, additionally a GaAs/AlAs core-shell heterostructure shows increased luminescence.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electron Accumulation Layers in InN Nanocolumns Studied by Raman Scattering

Inelastic light scattering measurements on single crystal InN nanocolumns grown by plasma-assisted molecular beam epitaxy on both Si(001) and Si(111) substrates reveal the existence of a surface electron accumulation layer in the lateral non-polar sidewalls of the nanocolumns. Small and reversible electron density variations of this surface layer has been induced by chemical treatments of the nanocolumns, which can be accurately determined from the frequency of the LO phonon-plasmon coupled mode L{sub -}. The L{sub -} to E{sub 1}(LO) phonon intensity ratio dependence on the column diameter and the excitation wavelength is interpreted in terms of the inhomogeneous electron distribution in the nanocolumns volume and the presence of strong elastic light scattering by the nanocolumns. The TO modes fail to obey conventional selection rules, a fact that is also observed in GaN nanocolumns.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetism in ZnO films with Mn and Co due to hydrogen plasma irradiation

High quality ZnO and magnetic element doped (Zn, Mn)O and (Zn, Co)O films were made by using a pulsed laser deposition (PLD) system. The results of X-ray diffraction measurements showed a single crystal of wurtzite structure. The ZnMnO film had electrical properties of an n-type semiconductor with carrier concentration of 5x10{sup 18} cm{sup -3}, while the ZnCoO films showed high conductance. From a deep level transient spectroscopy (DLTS) measurement, an oxygen vacancy and a Mn-related electron trap in the ZnMnO film were appeared as Ec-0.62 eV and Ec-0.13 eV, respectively.

36 MATERIALS SCIENCE↗