Search NASA⌕ Search

SEARCH · Search NASA

Results for “MULTIPLE SCATTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Investigation of the Impact of TSL Data Libraries and Geometry Variations on the MSRE Benchmark

The increasing demand for green, low-carbon energy solutions has amplified the focus on advanced nuclear reactor technologies. Among these, Molten Salt Reactors (MSRs) have been spotlighted because of their special features. Historically, Oak Ridge National Laboratory (ORNL) started the Molten Salt Reactor Experiment (MSRE) in 1956. Later, ORNL and the University of California, Berkeley (UCB) jointly developed the MSRE benchmark. This was then reviewed by the International Reactor Physics Experiment Evaluation Project (IRPhEP) committee and added to their 2019 handbook. In the current study, the benchmark model was recreated via the Serpent code. The calculated effective multiplication factor was 1.02087 ± 0.00019, which gives a deviation of about 2000 pcm compared to the benchmark/experimental result. At North Carolina State University (NCSU), recent evaluations were conducted on thermal scattering cross sections for molten salt FLiBe and 20% porous nuclear graphite, anticipated for incorporation in the ENDF/B-VIII.1 library. The influences of these thermal scattering law (TSL) data and geometry changes on the multiplication factor were examined using the ENDF/B-VII.1 and ENDF/B-VIII.0 libraries. Introducing the TSL data for FLiBe and 20% porous graphite resulted in an effective multiplication factor of +270 pcm compared to the reference value obtained with ENDF/B-VII.1 in this study. The adjustment of the reactor vessel dimensions resulted in decrease of -448 pcm in the calculated effective multiplication factor.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2013

Studies of photoconductivity and field effect transistor behavior in examining drift mobility, surface depletion, and transient effects in Si-doped GaN nanowires in vacuum and air

Variable intensity photoconductivity (PC) performed under vacuum at 325 nm was used to estimate drift mobility ({mu}) and density ({sigma}{sub s}) of negative surface charge for c-axis oriented Si-doped GaN nanowires (NWs). In this approach, we assumed that {sigma}{sub s} was responsible for the equilibrium surface band bending ( Empty-Set ) and surface depletion in the absence of illumination. The NWs were grown by molecular beam epitaxy to a length of approximately 10 {mu}m and exhibited negligible taper. The free carrier concentration (N) was separately measured using Raman scattering which yielded N = (2.5 {+-} 0.3) Multiplication-Sign 10{sup 17} cm{sup -3} for the growth batch studied under 325 nm excitation. Saturation of the PC was interpreted as a flatband condition whereby Empty-Set was eliminated via the injection of photogenerated holes. Measurements of dark and saturated photocurrents, N, NW dimensions, and dimensional uncertainties, were used as input to a temperature-dependent cylindrical Poisson equation based model, yielding {sigma}{sub s} in the range of (3.5 to 7.5) Multiplication-Sign 10{sup 11} cm{sup -2} and {mu} in the range of (850 to 2100) cm{sup 2}/(V s) across the (75 to 194) nm span of individual NW diameters examined. Data illustrating the spectral dependence and polarization dependence of the PC are also presented. Back-gating these devices, and devices from other growth batches, as field effect transistors (FETs) was found to not be a reliable means to estimate transport parameters (e.g., {mu} and {sigma}{sub s}) due to long-term current drift. The current drift was ascribed to screening of the FET back gate by injected positive charge. We describe how these gate charging effects can be exploited as a means to hasten the otherwise long recovery time of NW devices used as photoconductive detectors. Additionally, we present data illustrating comparative drift effects under vacuum, room air, and dry air for both back-gated NW FETs and top-gated NW MESFETs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Systematic study of nuclear effects in p + Al , p + Au , d + Au , and He 3 + Au collisions at s N N = 200 GeV using π 0 production

The PHENIX Collaboration presents a systematic study of inclusive π 0 production from p + p , p + Al , p + Au , d + Au , and He 3 + Au collisions at s N N = 200 GeV . Measurements were performed with different centrality selections as well as the total inelastic, 0–100%, selection for all collision systems. For 0–100% collisions, the nuclear-modification factors, R x A , are consistent with unity for p T above 8 GeV / c , but exhibit an enhancement in peripheral collisions and a suppression in central collisions. The enhancement and suppression characteristics are similar for all systems for the same centrality class. It is shown that for high- p T - π 0 production, the nucleons in the d and He 3 interact mostly independently with the Au nucleus and that the counterintuitive centrality dependence is likely due to a physical correlation between multiplicity and the presence of a hard scattering process. These observations disfavor models where parton energy loss has a significant contribution to nuclear modifications in small systems. Nuclear modifications at lower p T resemble the Cronin effect—an increase followed by a peak in central or inelastic collisions and a plateau in peripheral collisions. The peak height has a characteristic ordering by system size as p + Au > d + Au > He 3 + Au > p + Al . For collisions with Au ions, current calculations based on initial-state cold nuclear matter effects result in the opposite order, suggesting the presence of other contributions to nuclear modifications, in particular at lower p T .

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Probabilistic data fusion and physics-informed machine learning: A new paradigm for modeling under uncertainty, and its application to accelerating the discovery of new materials

In this report we summarize the work conducted by PI Perdikaris and his group under this Early Career project DE–SC0019116 during the period of 09/01/2018 – 08/31/2023. The central aim of the work was to introduce a new paradigm for scientific data analysis that can seamlessly synthesize rigorous mathematical modeling with data of variable fidelity (e.g., measurements at multiple scales/resolutions or predictions of variable fidelity models) and multiple modalities (e.g., images, time–series, or scattered measurements). The setting we are interested in involves complex systems that are partially observed and whose dynamical behavior could be hard to model or totally unknown. The inherent uncertainty associated with this setting necessitates a departure from the classical deterministic realm of modeling and scientific computation, and, consequently, our main building blocks can no longer be crisp deterministic numbers and governing laws, but instead we must operate with probabilistic models.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1968

Calculation of resonance broadening.

Resonance broadening of radiative state line shape, calculating contributions from multiple transfer of excitation and two body scattering

Zaidi, H. R.↗
NASA NTRS1983

Slow crack growth in spinel in water

Magnesium aluminate spinel was tested in a water environment at room temperature to establish its slow crack-growth behavior. Ring specimens with artificial flaws on the outside surface were loaded hydraulically on the inside surface. The time to failure was measured. Various precracking techniques were evaluated and multiple precracks were used to minimize the scatter in the static fatigue tests. Statistical analysis techniques were developed to determine the strength and crack velocities for a single flaw. Slow crack-growth rupture was observed at stress intensities as low as 70 percent of K sub c. A strengthening effect was observed in specimens that had survived long-time static fatigue tests.

Schwantes, S.↗
NASA NTRS1985

Automated Extraction of Absorption Bands from Reflectance Special

A multiple high order derivative spectroscopy technique has been developed for deriving wavelength positions, half widths, and heights of absorption bands in reflectance spectra. The technique is applicable to laboratory spectra as well as medium resolution (100-200/cm) telescope or spacecraft spectra with moderate (few percent) noise. The technique permits absorption band positions to be detected with an accuracy of better than 3%, and often better than 1%. The high complexity of radiative transfer processes in diffusely reflected spectra can complicate the determination of absorption band positions. Continuum reflections, random illumination geometries within the material, phase angle effects, composite overlapping bands, and calibration uncertainties can shift apparent band positions by 20% from their actual positions or mask them beyond detection. Using multiple high order derivative analysis, effects of scattering continua, phase angle, and calibration (smooth features) are suppressed. Inflection points that characterize the positions and half widths of constituent bands are enhanced by the process and directly detected with relatively high sensitivity.

Huguenin, R. L.↗
NASA NTRS1993

Time-sequenced and spectrally filtered Rayleigh imaging of shock wave and boundary layer structure for inlet characterization

Multiple pulsed Rayleigh imaging and filtered Rayleigh scattering are used to generate images of a complex boundary layer structure, shock wave/boundary layer interactions, and crossing shock waves. Time-sequenced Rayleigh images taken with a visible, double-pulsed laser system show the evolution of boundary layer structure of the internal flow in a generic cross-shock inlet. The images taken in the inlet give insight into 3D effects caused by the inlet geometry and may be used for modeling the complex flows.

Forkey, Joseph↗
NASA NTRS1998

A Study of Transport in the Near-Earth Plasma Sheet During A Substorm Using Time-Dependent Large Scale Kinetics

In this study we investigate the transport of H+ ions that made up the complex ion distribution function observed by the Geotail spacecraft at 0740 UT on November 24, 1996. This ion distribution function, observed by Geotail at approximately 20 R(sub E) downtail, was used to initialize a time-dependent large-scale kinetic (LSK) calculation of the trajectories of 75,000 ions forward in time. Time-dependent magnetic and electric fields were obtained from a global magnetohydrodynamic (MHD) simulation of the magnetosphere and its interaction with the solar wind and the interplanetary magnetic field (IMF) as observed during the interval of the observation of the distribution function. Our calculations indicate that the particles observed by Geotail were scattered across the equatorial plane by the multiple interactions with the current sheet and then convected sunward. They were energized by the dawn-dusk electric field during their transport from Geotail location and ultimately were lost at the ionospheric boundary or into the magnetopause.

El-Alaoui, M.↗
NASA NTRS2006

Large format imaging arrays for the Atacama Cosmology Telescope

We describe progress in the fabrication, characterization, and production of detector arrays for the Atacama Cosmology Telescope (ACT). The completed ACT instrument is specified to image simultaneously at 145, 225, and 265 GHz using three 32x32 filled arrays of superconducting transition edge sensors (TES) read out with time-division-multiplexed SQUID amplifiers. We present details of the pixel design and testing including the optimization of the electrical parameters for multiplexed readout. Using geometric noise suppression and careful tuning of operation temperature and device bias resistance, the excess noise in the TES devices is balanced with detector speed for interfacing with the ACT optics. The design also accounts for practical tolerances such as transition temperature gradients and scatter that occur in the production of multiple wafers to populate fully the kilopixel cameras. We have developed an implanted absorber layer compatible with our silicon-on-insulator process that allows for tunable optical resistance with requisite on-wafer uniformity and wafer-to-wafer reproducibility. Arrays of 32 elements have been tested in the laboratory environment including electrical, optical, and multiplexed performance. Given this pixel design, optical tests and modeling are used to predict the performance of the filled array under anticipated viewing conditions. Integration of the filled array of pixels with a tuned backshort and dielectric plate in front of the array maximize absorption and the focal plane and suppress reflections. A mechanical design for the build of the full structure is completed and we report on progress toward the construction of a prototype array for first light on the ACT.

Chervenak, J. A.↗
DOE OSTI2012

New Homogeneous Standards by Atomic Layer Deposition for Synchrotron X-ray Fluorescence and Absorption Spectroscopies.

Quantification of synchrotron XRF analyses is typically done through comparisons with measurements on the NIST SRM 1832/1833 thin film standards. Unfortunately, these standards are inhomogeneous on small scales at the tens of percent level. We are synthesizing new homogeneous multilayer standards using the Atomic Layer Deposition technique and characterizing them using multiple analytical methods, including ellipsometry, Rutherford Back Scattering at Evans Analytical, Synchrotron X-ray Fluorescence (SXRF) at Advanced Photon Source (APS) Beamline 13-ID, Synchrotron X-ray Absorption Spectroscopy (XAS) at Advanced Light Source (ALS) Beamlines 11.0.2 and 5.3.2.1 and by electron microscopy techniques. Our motivation for developing much-needed cross-calibration of synchrotron techniques is borne from coordinated analyses of particles captured in the aerogel of the NASA Stardust Interstellar Dust Collector (SIDC). The Stardust Interstellar Dust Preliminary Examination (ISPE) team have characterized three sub-nanogram, {approx}1{micro}m-sized fragments considered as candidates to be the first contemporary interstellar dust ever collected, based on their chemistries and trajectories. The candidates were analyzed in small wedges of aerogel in which they were extracted from the larger collector, using high sensitivity, high spatial resolution >3 keV synchrotron x-ray fluorescence spectroscopy (SXRF) and <2 keV synchrotron x-ray transmission microscopy (STXM) during Stardust ISPE. The ISPE synchrotron techniques have complementary capabilities. Hard X-ray SXRF is sensitive to sub-fg mass of elements Z {ge} 20 (calcium) and has a spatial resolution as low as 90nm. X-ray Diffraction data were collected simultaneously with SXRF data. Soft X-ray STXM at ALS beamline 11.0.2 can detect fg-mass of most elements, including cosmochemically important oxygen, magnesium, aluminum and silicon, which are invisible to SXRF in this application. ALS beamline 11.0.2 has spatial resolution better than 25 nm. Limiting factors for Stardust STXM analyses were self-imposed limits of photon dose due to radiation damage concerns, and significant attenuation of <1500 eV X-rays by {approx}80{micro}m thick, {approx}25 mg/cm{sup 3} density silica aerogel capture medium. In practice, the ISPE team characterized the major, light elements using STXM (O, Mg, Al, Si) and the heavier minor and trace elements using SXRF. The two data sets overlapped only with minor Fe and Ni ({approx}1% mass abundance), providing few quantitative cross-checks. New improved standards for cross calibration are essential for consortium-based analyses of Stardust interstellar and cometary particles, IDPs. Indeed, they have far reaching application across the whole synchrotron-based analytical community. We have synthesized three ALD multilayers simultaneously on silicon nitride membranes and silicon and characterized them using RBS (on Si), XRF (on Si{sub 3}N{sub 4}) and STXM/XAS (holey Si{sub 3}N{sub 4}). The systems we have started to work with are Al-Zn-Fe and Y-Mg-Er. We have found these ALD multi-layers to be uniform at {micro}m- to nm scales, and have found excellent consistency between four analytical techniques so far. The ALD films can also be used as a standard for e-beam instruments, eg., TEM EELS or EDX. After some early issues with the consistency of coatings to the back-side of the membrane windows, we are confident to be able to show multi-analytical agreement to within 10%. As the precision improves, we can use the new standards to verify or improve the tabulated cross-sections.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

(U) Average Scattering Angle Cosine Sensitivities

The Evaluated Nuclear Data File (ENDF) provides covariances of the average scattering angle cosine $\overline{μ}$ for 117 nuclides, and the NJOY nuclear data processing code can process these covariances. To propagate them to the uncertainty of a response due to uncertainties in $\overline{μ}$ requires sensitivities of the response with respect to $\overline{μ}$. This report uses NJOY’s definition of $\overline{μ}$ and derives a relationship between the sensitivity of a response to $\overline{μ}$ and the sensitivity of the response to the anisotropic P 1 elastic scattering cross section. This relationship has been implemented in the multigroup neutron sensitivity code SENSMG, which relies on the discrete ordinates code PARTISN for the neutron transport calculations. Kodeli has also calculated sensitivities with respect to $\overline{μ}$ and associated uncertainties. However, the formal derivation of this paper shows that the definition of the sensitivity with respect to $\overline{μ}$ is ambiguous because there are multiple ways to change $\overline{μ}$ by changing scattering cross sections. Here we derive two such ways. Both are implemented in SENSMG. This report is organized as follows. Section II discusses $\overline{μ}$ and its significance. Section III presents the equations used for the sensitivity of a response with respect to $\overline{μ}$, and Section IV discusses how to compute these sensitivities with SENSMG and MCNP6.3. Section V is a fast-spectrum test problem, and Sec. VI is a thermal-spectrum problem. Section VII is a summary. The example problem inputs are listed in the appendix.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

The PAU Survey: Photometric redshifts using transfer learning from simulations

In this paper, we introduce the DEEPZ deep learning photometric redshift (photo-z) code. As a test case, we apply the code to the PAU survey (PAUS) data in the COSMOS field. DEEPZ reduces the σ68 scatter statistic by 50 percent at iAB = 22.5 compared to existing algorithms. This improvement is achieved through various methods, including transfer learning from simulations where the training set consists of simulations as well as observations, which reduces the need for training data. The redshift probability distribution is estimated with a mixture density network (MDN), which produces accurate redshift distributions. Our code includes an autoencoder to reduce noise and extract features from the galaxy SEDs. It also benefits from combining multiple networks, which lowers the photo-z scatter by 10 percent. Furthermore, training with randomly constructed coadded fluxes adds information about individual exposures, reducing the impact of photometric outliers. In addition to opening up the route for higher redshift precision with narrow bands, these machine learning techniques can also be valuable for broad-band surveys.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1979

Radiative transfer in spherical dust shells using a generalized two-stream Eddington approximation

Application of a generalized two-stream Eddington approximation to the problem of radiative transfer in extended, spherically symmetric dust shells is presented. It is assumed that the radiation field can be characterized by the mean intensity, the flux, and a positionally dependent direction cosine specifying the division into two solid-angle ranges. The direction cosine is not specified a priori and is a function of the geometry, opacity, and emissivity in the dust shell. A multiple-grain-size multiple-temperature-distribution dust shell is postulated in which isotropic and anisotropic scattering as well as absorption and thermal reemission are allowed. A program has been developed that solves for the multiple temperature distributions by applying the constraint of radiative equilibrium to each grain size, and then calculates emergent fluxes. Results of one such calculation are presented for a model dust shell having a maximum optical depth (approximately 41) in the visible, clearly showing large optical extinction and a moderate infrared excess.

Haisch, B. M.↗
DOE OSTI2019

Double-soft graviton amplitudes and the extended BMS charge algebra

We discuss how scattering amplitudes in 4d Minkowski spacetime which involve multiple soft gravitons realize the algebra of BMS charges on the null boundary. In particular, we show how the commutator of two such charges is realized by the antisymmetrized consecutive soft limit of the double soft amplitude. The commutator is expected to be robust even in the presence of quantum corrections, and the associated Lie algebra has an extension, which breaks the BMS symmetry if the BMS algebra is taken to include the Virasoro algebra of local superrotations. We discuss the implications of this structure for the existence of a 2d CFT dual description for 4d scattering amplitudes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2013

SPECTRAL VARIABILITY OF IRAS 18325-5926 AND CONSTRAINTS ON THE GEOMETRY OF THE SCATTERING MEDIUM

We analyze Suzaku and XMM-Newton data of the highly variable Seyfert 2, IRAS 18325-5926. The spectra of the source are well modeled as a primary component described as an absorbed power law and a secondary power-law component which is consistent with being scattered emission from an on-axis extended highly ionized medium. We show that while the primary component varies on a wide range of timescales from 10{sup 4}-10{sup 8} s, the scattered emission is variable only on timescales longer than 10{sup 5} s. This implies that the extent of the scattering medium is greater than 10{sup 16} cm. The ratio of the scattered to primary flux ({approx}0.03) implies a column density for the scattering medium to be {approx}10{sup 23} cm{sup -2}. We argue that for such a medium to be highly ionized it must be located less than 10{sup 17} cm from the X-ray source. Thus, we localize the position and extent of scattering region to be {approx}a few Multiplication-Sign 10{sup 16} cm, with an average particle density of {approx}10{sup 6} cm{sup -3}. We consider the physical interpretation of these results, and as an aside we confirm the presence of a broad iron line emission in both the XMM-Newton and Suzaku observations.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2015

Enhanced Raman scattering from aromatic dithiols electrosprayed into plasmonic nanojunctions

We describe surface enhanced Raman spectroscopy (SERS) experiments in which molecular coverage is systematically varied from 3.8 x 105 to 3.8 x 102 to 0.38 molecules/μm2 using electrospray deposition of ethanolic 4,4’-dimercaptostilbene (DMS) solutions. The plasmonic SERS substrate used herein consists of a well-characterized 2-dimensional (2D) array of silver nanospheres [see El-Khoury et al., J. Chem. Phys., 2014, 141, 214308], previously shown to feature uniform topography and plasmonic response, as well as intense SERS activity. When compared to their ensemble averaged analogues, the spatially and temporally averaged spectra of a single molecule exhibit several unique features including: (i) distinct relative intensities of the observable Raman-active vibrational states, (ii) more pronounced SERS backgrounds, and (iii) broader Raman lines indicative of faster vibrational dephasing. The first observation may be understood on the basis of an intuitive physical picture in which removal of averaging over multiple molecules exposes the tensorial nature of Raman scattering. When an oriented single molecule gives rise to the recorded SERS spectra, the relative orientation of the molecule with respect to vector components of the local electric field determines the relative intensities of the observable vibrational states. Using a single molecule SERS framework described herein, we derive a unique molecular orientation in which a single DMS molecule is isolated at a nanojunction formed between two silver nanospheres in the 2D array. The DMS molecule is found lying nearly flat with respect to the metal surface. The derived orientation of a single molecule at a plasmonic nanojunction is consistent with observations (ii) and (iii). In particular, a careful inspection of the temporal spectral variations along the recorded single molecule SERS time sequences reveals that the time-averaged SERS backgrounds arise from individual molecular events, marked by broadened SERS signatures. We assign the broadened spectra along the SERS time sequence – which sum up to a SERS background in the averaged spectra – to instances in which the π-framework of the DMS molecule is parallel to the metal surface. This also accounts for Raman line broadening as a result of fast vibrational dephasing and driven by molecular reorientation at a plasmonic nanojunction. Furthermore, we report on the orientation dependence of single molecule SERS enhancement factors. We find that in the case of a single DMS molecule isolated at a plasmonic nanojunction, molecular orientation may affect the derived single molecule SERS enhancement factor by up to 5 orders of magnitude. Taking both chemical effects as well as molecular orientation into account, we were able to estimate a single molecule enhancement factor of ~1010 in our measurements.

Environmental Molecular Sciences Laboratory↗