Search NASA⌕ Search

SEARCH · Search NASA

Results for “Multiple Errors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Reduced-Order Modeling of a Heaving Airfoil

A reduced-order model of a flapping airfoil is developed using Proper Orthogonal Decomposition (POD). The proper basis functions, developed from snapshots of full Navier-Stokes simulations, are used for a Galerkin projection of the governing equations. The resulting coupled, nonlinear ordinary di.erential equations have a low dimension because the first few basis members capture most of the energy of the flow. The reduced-order model is used to simulate heaving motions that are both similar to and different from the motion(s) used to generate the basis functions, and the errors in the model are quantified. Several methods are used to generate mode sets that can be used over a range of heaving parameters, including snapshots from one, two, and multiple Navier-Stokes simulations. As snapshots from additional simulations are added to the decomposition, the mode sets become richer and can simulate a wider range of parameter space, at some computational cost. Whereas the POD method is fully applicable in three dimensions, the simulation technique based on a body-fixed and body-fitted grid suffers large overhead when extended to three dimensions. To reduce the overhead, an embedding technique is discussed which embeds the solid wing into a fixed Cartesian grid. The wing, which can now have multiple pieces and also be flexible, is represented by a distribution of body forces. This distribution is determined to give exactly the flow around a flapping wing.

Haj-Hariri, H.↗

Performance of the Center-Of-Curvature Optical Assembly During Cryogenic Testing of the James Webb Space Telescope

Cryogenic testing of the James Webb Space Telescope (JWST) included center-of-curvature metrology of the 18-segment primary mirror (PM). The Center-of-Curvature Optical Assembly (COCOA) consisted of a multiple-wavelength interferometer, a reflective null, coarse and fine alignment systems, and two displacement measuring interferometer systems. The COCOA enabled alignment and phasing of the segments from millimeter-level errors down to the nanometer level. This paper describes the COCOA, the test setup, the testing performed, and the performance of the COCOA in aligning the PM segments and measuring the final PM wavefront error.

Hadaway, James↗

High-precision predictions of properties of chemically disordered crystals

Multiple scattering theory (MST) combined with density functional theory (DFT) allows to predict properties of chemically disordered materials from the first principles. However, such predictions often suffer from the systematic errors, which depend on crystal geometry. Each computed property of a particular crystal structure typically has a relatively small random error and a larger systematic error. Cancellation of systematic errors allows more accurate predictions. We propose a computational methodology based on the subtraction of the systematic errors in MST. To exemplify it, we apply it to the precipitated alloys. Considering precipitation strengthening in Ni superalloys, we compute the relative enthalpies of the competing Ni3(Al,Ti)1 crystal structures with a chemical disorder on the Al+Ti sublattice. Such predicted composition-structure-property dependencies are useful for the guided design of the next-generation alloys with improved strength. Our predictions are validated by comparison with the results of other DFT methods (having a higher computational cost) and with experiment. We acknowledge funding of the guided design of stronger superalloys for airspace by NASA Aeronautics Research Mission Directorate (ARMD) via Transformational Tools and Technologies (TTT) Project.

Computational↗

Preliminary Application of Formal Verification to An Autonomy Architecture for Unmanned Aircraft

There is a desire to design autonomous systems in such a way that capabilities can be easily added or re- combined to produce new behaviors while preserving their safety properties. ICAROUS, a prototype software architecture for building safety-centric autonomous unmanned aircraft applications, is designed to support this type of extensibility and re-configurability. In ICAROUS, core capabilities are implemented as individual soft- ware services, so that enabling access to new capabilities simply requires adding new services. To make use of these capabilities, ICAROUS includes a specialized service that provides a general framework for config- uring the relative priorities, conditions, and rules that govern how different modules should be engaged and disengaged during flight. The inherent complexity of coordinating multiple modules under changing conditions makes it difficult to determine whether a particular configuration could have erroneous behaviors in certain circumstances. A robust set of integration tests can help discover errors, but testing can only realistically cover a relatively small proportion of total system behaviors. Developing good tests and interpreting the results to pinpoint the cause of errors when they arise can also be very time-consuming. To supplement testing, formal methods can be used to model and analyze complex systems, achieving better coverage and simplifying the process of finding, understanding, and fixing errors. To demonstrate these benefits, this paper explores the ap- plication of formal methods to ICAROUS. In particular, the Spin model checker is used to specify requirements for and model portions of the system, then verify whether the model satisfies the requirements and find and fix errors when it does not.

Formal Methods↗

Preliminary Application of Formal Verification to An Autonomy Architecture for Unmanned Aircraft

There is a desire to design autonomous systems in such a way that capabilities can be easily added or re-combined to produce new behaviors while preserving their safety properties. ICAROUS, a prototype software architecture for building safety-centric autonomous unmanned aircraft applications, is designed to support this type of extensibility and re-configurability. In ICAROUS, core capabilities are implemented as individual soft- ware services, so that enabling access to new capabilities simply requires adding new services. To make use of these capabilities, ICAROUS includes a specialized service that provides a general framework for config- uring the relative priorities, conditions, and rules that govern how different modules should be engaged and disengaged during flight. The inherent complexity of coordinating multiple modules under changing conditions makes it difficult to determine whether a particular configuration could have erroneous behaviors in certain circumstances. A robust set of integration tests can help discover errors, but testing can only realistically cover a relatively small proportion of total system behaviors. Developing good tests and interpreting the results to pinpoint the cause of errors when they arise can also be very time-consuming. To supplement testing, formal methods can be used to model and analyze complex systems, achieving better coverage and simplifying the process of finding, understanding, and fixing errors. To demonstrate these benefits, this paper explores the ap- plication of formal methods to ICAROUS. In particular, the Spin model checker is used to specify requirements for and model portions of the system, then verify whether the model satisfies the requirements and find and fix errors when it does not.

Formal Methods↗

Integrated Sensing & Controls for Coal Gasification - Development of Model-Based Controls for GE's Gasifier & Syngas Cooler. Topical Rerport for Phase III

This Topical Report for the final Phase III of the program summarizes the results from the Task 3 of the program. In this task, the separately designed extended Kalman Filter (EKF) and model predictive controls (MPC) with ideal sensing, developed in Phase II, were integrated to achieve the overall sensing and control system for the gasification section of an IGCC plant. The EKF and MPC algorithms were updated and re-tuned to achieve closed-loop system stability as well as good steady-state and transient control response. In particular, the performance of the integrated EKF and MPC solution was tested extensively through multiple simulation studies to achieve improved steady-state as well as transient performance, with coal as well as coal-petcoke blended fuel, in the presence of unknown modeling errors as well as sensor errors (noise and bias). The simulation studies demonstrated significant improvements in steady state and transient operation performance, similar to that achieved by MPC with ideal sensors in Phase II of the program.

20 FOSSIL-FUELED POWER PLANTS↗

Multiple model inference.

This paper compares three approaches for model selection: classical least squares methods, information theoretic criteria, and Bayesian approaches. Least squares methods are not model selection methods although one can select the model that yields the smallest sum-of-squared error function. Information theoretic approaches balance overfitting with model accuracy by incorporating terms that penalize more parameters with a log-likelihood term to reflect goodness of fit. Bayesian model selection involves calculating the posterior probability that each model is correct, given experimental data and prior probabilities that each model is correct. As part of this calculation, one often calibrates the parameters of each model and this is included in the Bayesian calculations. Our approach is demonstrated on a structural dynamics example with models for energy dissipation and peak force across a bolted joint. The three approaches are compared and the influence of the log-likelihood term in all approaches is discussed.

99 GENERAL AND MISCELLANEOUS↗

Nitrogen abundances and multiple stellar populations in the globular clusters of the Fornax dSph

We use measurements of nitrogen abundances in red giants to search for multiple stellar populations in the four most metal-poor globular clusters (GCs) in the Fornax dwarf spheroidal galaxy (Fornax 1, 2, 3, and 5). New imaging in the F343N filter, obtained with the Wide Field Camera 3 on the Hubble Space Telescope, is combined with archival F555W and F814W observations to determine the strength of the NH band near 3370 Å. After accounting for observational errors, the spread in the F343N-F555W colors of red giants in the Fornax GCs is similar to that in M15 and corresponds to an abundance range of Δ[N/Fe] ∼ 2 dex, as observed also in several Galactic GCs. The spread in F555W-F814W is, instead, fully accounted for by observational errors. The stars with the reddest F343N-F555W colors (indicative of N-enhanced composition) have more centrally concentrated radial distributions in all four clusters, although the difference is not highly statistically significant within any individual cluster. From double-Gaussian fits to the color distributions, we find roughly equal numbers of 'N-normal' and 'N-enhanced' stars (formally ∼40% N-normal stars in Fornax 1, 3, and 5 and ∼60% in Fornax 2). We conclude that GC formation, in particular, regarding the processes responsible for the origin of multiple stellar populations, appears to have operated similarly in the Milky Way and in the Fornax dSph. Combined with the high ratio of metal-poor GCs to field stars in the Fornax dSph, this places an important constraint on scenarios for the origin of multiple stellar populations in GCs.

79 ASTRONOMY AND ASTROPHYSICS↗

Multiple scattering depolarization in marine stratus clouds: Lidar experiments

The depolarization of ruby lidar backscattering caused by multiple scattering in marine stratus clouds was examined systematically from a field site on the southern California coast. Investigated were the effects on the linear depolarization (delta) of lidar receiver field of view (FOV), elevation angle and laser beam pointing errors. An approximately linear increase in maximum delta values was observed with increasing receiver FOV, and the importance of accurate transmitter/receiver beam alignment was demonstrated during experiments in which the laser axis was deliberately misaligned. An elevation angle dependence to the delta values was observed as a consequence of the natural vertical inhomogeneity of water cloud content above the cloud base. Time histories of the depolarization characteristics of dissipating stratus clouds revealed significant spatial and temporal variability in delta values attributed to cloud composition variations. Employing a 1 mrad transmitter FOV, maximum delta values of 0.21 nd 0.33 were observed with 1 and 3 mrad receiver FOVs, respectively, from the low stratus clouds. The fundamental causes and effects on the lidar equation of multiple scattering are also discussed.

Sassen, K.↗

The impact of fuel particle size distribution on neutron transport in stochastic media

This paper presents a study of the particle size distribution impact on neutron transport in three-dimensional stochastic media. An eigenvalue problem is simulated in a cylindrical container consisting of fissile fuel particles with five different size distributions: constant, uniform, power, exponential and Gaussian. We construct 15 cases by altering the fissile particle volume packing fraction and its optical thickness, but keeping the mean chord length of the spherical fuel particle the same at different size distributions. The tallied effective multiplication factor (k{sub eff}) and flux distribution along axial and radial directions are compared between different size distributions. At low packing fraction and low optical thickness, the size distribution has a significant impact on radiation transport in stochastic media, which can cause as high as {approx}270 pcm difference in k{sub eff} value and {approx}2.6% relative error difference in peak flux. As the packing fraction and optical thickness increase, the impact gradually dissipates. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

On the use of a multiple beam optical sensor for in situ curvature monitoring in liquids

Several methods have been developed since the early 1900 to extract thin film stresses from the curvature of the substrate to which it is attached. One robust method particularly suitable for in situ curvature monitoring is the multiple beam optical sensor, which consists in measuring the change in relative spacings between parallel laser beams reflecting off the curved substrate. Although the technique is already well established for curvature monitoring in low pressure, gaseous environments, its use in liquid media has not yet received similar attention. Moreover, in the majority of the published work so far, spot spacings have been assumed to depend linearly on curvature. In this paper, it is first shown that this assumption may induce significant errors, particularly at large curvature. A more accurate set of equations is proposed. Next, the relationship between spot spacings and curvature is established when the substrate of interest is in a liquid, and a constitutive formula is proposed in that case as well. Finally, some practical aspects of the multiple beam technique for performing curvature measurements in a liquid are discussed. Various factors disturbing the measurement resolution are identified, with a specific interest for thin film anodizing, and a cell design is proposed to minimize their effect.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Boron coated straw-based neutron multiplicity counter for neutron interrogation of TRISO fueled pebbles

Pebble bed reactors (PBRs) can improve the safety and economics of the nuclear energy production. PBRs rely on TRIstructural-ISOtropic (TRISO) fuel pebbles for enhanced fission product retention. Accurate characterization of individual fuel pebbles would enable the validation of computational models, efficient use of TRISO fuel, and improve fuel accountability. Here, we have developed and tested a new neutron multiplicity counter (NMC) based on 192 boron coated straw (BCS) detectors optimized for 235 U assay in TRISO fuel. The new design yielded a singles and doubles neutron detection efficiency of 4.71% and 0.174%, respectively, and a die-away time of 16.7 μs. The NMC has a low intrinsic gamma-ray detection efficiency of 8.71 x 10 –8 at an exposure rate of 80.3 mR/h. In simulation, a high-efficiency version of the NMC encompassing 396 straws was able to estimate the 235 U in a pebble with a relative uncertainty and error both below 2% in 100 s.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Evaluating the Accuracy and Precision of Multiple Abundance Estimators Using State-Space Models: A Case Study for a Threatened Population of Chinook Salmon in Johnson Creek, Idaho

Abstract Over the last century, Chinook Salmon Oncorhynchus tshawytscha populations in the Pacific Northwest have experienced dramatic declines, leading to many of them being listed as threatened under the Endangered Species Act. The abundance of these threatened populations relative to the thresholds for delisting remains the primary metric for assessing recovery, yet determining the true population abundances from multiple survey types with unknown levels of accuracy and precision remains difficult. The abundance of the spring–summer Chinook Salmon population in Johnson Creek, Idaho, has been measured using a mark–recapture survey and three different redd count surveys (RCSs) that vary temporally and spatially. Using a state-space model, we determined the accuracy and precision of each survey type by decoupling the observation error of the survey from the process error describing the annual variability in the true population abundance. We then extended the results of the model to determine the risk of managers’ incorrectly delisting the population (a type I error) or incorrectly keeping it listed (a type II error). Finally, we show that salmon managers with data-limited populations (primarily those with only single-pass index RCSs) might use the results of our risk analysis to determine whether expanding survey efforts to minimize management risks is appropriate when they are confronted with dwindling financial resources. For example, we determined that although both the multiple-pass extended RCS (CV = 0.06) and mark–recapture surveys (CV = 0.14) provide unbiased estimates of salmon abundance in Johnson Creek, the mark–recapture study can have annual costs that are 30–100 times greater. Managers may determine that directing research funds toward acquiring information unique to weir-based mark–recapture surveys (i.e., migration timing, good genetics samples, etc.) may not be justified for all populations. Received October 7, 2013; accepted March 5, 2014

Chasco, Brandon E.↗

Less-Complex Method of Classifying MPSK

An alternative to an optimal method of automated classification of signals modulated with M-ary phase-shift-keying (M-ary PSK or MPSK) has been derived. The alternative method is approximate, but it offers nearly optimal performance and entails much less complexity, which translates to much less computation time. Modulation classification is becoming increasingly important in radio-communication systems that utilize multiple data modulation schemes and include software-defined or software-controlled receivers. Such a receiver may "know" little a priori about an incoming signal but may be required to correctly classify its data rate, modulation type, and forward error-correction code before properly configuring itself to acquire and track the symbol timing, carrier frequency, and phase, and ultimately produce decoded bits. Modulation classification has long been an important component of military interception of initially unknown radio signals transmitted by adversaries. Modulation classification may also be useful for enabling cellular telephones to automatically recognize different signal types and configure themselves accordingly. The concept of modulation classification as outlined in the preceding paragraph is quite general. However, at the present early stage of development, and for the purpose of describing the present alternative method, the term "modulation classification" or simply "classification" signifies, more specifically, a distinction between M-ary and M'-ary PSK, where M and M' represent two different integer multiples of 2. Both the prior optimal method and the present alternative method require the acquisition of magnitude and phase values of a number (N) of consecutive baseband samples of the incoming signal + noise. The prior optimal method is based on a maximum- likelihood (ML) classification rule that requires a calculation of likelihood functions for the M and M' hypotheses: Each likelihood function is an integral, over a full cycle of carrier phase, of a complicated sum of functions of the baseband sample values, the carrier phase, the carrier-signal and noise magnitudes, and M or M'. Then the likelihood ratio, defined as the ratio between the likelihood functions, is computed, leading to the choice of whichever hypothesis - M or M'- is more likely. In the alternative method, the integral in each likelihood function is approximated by a sum over values of the integrand sampled at a number, 1, of equally spaced values of carrier phase. Used in this way, 1 is a parameter that can be adjusted to trade computational complexity against the probability of misclassification. In the limit as 1 approaches infinity, one obtains the integral form of the likelihood function and thus recovers the ML classification. The present approximate method has been tested in comparison with the ML method by means of computational simulations. The results of the simulations have shown that the performance (as quantified by probability of misclassification) of the approximate method is nearly indistinguishable from that of the ML method (see figure).

Hamkins, Jon↗

Radiatively important parameters best estimate (RIPBE) value-added product (VAP)

Currently, to calculate radiative heating rate profiles for the Broadband Heating Rate Profile (BBHRP) product, radiatively important parameters (water vapor, ozone, surface albedo, aerosol properties, and cloud properties) from multiple VAPs and datastreams are combined into input text files that are then used to run the RRTM radiative transfer codes. These input parameters have different temporal and spatial scales and are difficult to extract from the text files to be used for other purposes such as running other radiative transfer codes, analyzing results, or error tracking. The purpose of the Radiatively Important Parameters Best Estimate (RIPBE) VAP is to improve this process by creating a clearly identified set of inputs for BBHRP (and other radiation codes) on a uniform vertical and temporal grid. This process will decouple the input/output portion of the BBHRP from the core physics (the RRTM radiative transfer model) and will add error tracking and version information to the input data set. Critical parameters (which must exist for the radiation code to be run) will be designated; for other parameters, climatological or fixed values will be used when the preferred values are missing. This should increase the number of cases for which radiative transfer calculations can be run. In all cases, flags will clearly identify the source for each parameter. RIPBE will serve multiple functions: (1) it will provide a clearly identifiable set of inputs for BBHRP, (2) it will facilitate the use of BBHRP as a retrieval and radiation code development testbed by providing a vehicle for easily extracting and swapping input parameters needed to conduct radiative transfer calculations, and (3) it will be a complement to the Climate Modeling Best Estimate (CMBE) VAP and will provide a significantly expanded set of parameters for model evaluation in a showcase data set form. At the ASR meeting, we will present examples and evaluation of the initial RIPBE dataset at SGP.

54 ENVIRONMENTAL SCIENCES↗

A phase-based interior penalty discontinuous Galerkin method for the Helmholtz equation with spatially varying wavenumber

This paper is concerned with an interior penalty discontinuous Galerkin (IPDG) method based on a flexible type of non-polynomial local approximation space for the Helmholtz equation with varying wavenumber. The local approximation space consists of multiple polynomial-modulated phase functions which can be chosen according to the phase information of the solution. We obtain some approximation properties for this space and a priori L 2 error estimates for the h-convergence of the IPDG method using duality argument. We also provide ample numerical examples to show that, building phase information into the local spaces often gives more accurate results comparing to using the standard polynomial spaces.

42 ENGINEERING↗

Application of the Hartmann–Tran profile to precise experimental data sets of 12 C 2 H 2

Self- and nitrogen-broadened line shape data for the P e (11) line of the ν₁ + ν₃ band of acetylene, recorded using a frequency comb-stabilized laser spectrometer, have been analyzed using the Hartmann–Tran profile (HTP) line shape model in a multispectrum fitting. In total, the data included measurements recorded at temperatures between 125 K and 296 K and at pressures between 4 and 760 Torr. New, sub-Doppler, frequency comb-referenced measurements of the positions of multiple underlying hot band lines have also been made. These underlying lines significantly affect the P e (11) line profile at temperatures above 240 K and poorly known frequencies previously introduced errors into the line shape analyses. Thus, the behavior of the HTP model was compared to the quadratic speed dependent Voigt profile (QSDVP) expressed in the frequency and time domains. A parameter uncertainty analysis was carried out using a Monte Carlo method based on the estimated pressure, transmittance and frequency measurement errors. From the analyses, the P e (11) line strength was estimated to be 1.2014(50) × 10 -20 in cm.molecules⁻¹ units at 296 K with the standard deviation in parenthesis. For analyzing these data, we found that a reduced form of the HTP, equivalent to the QSDVP, was most appropriate because the additional parameters included in the full HTP were not well determined. As a supplement to this work, expressions for analytic derivatives and a lineshape fitting code written in Matlab for the HTP are available.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗