Search NASA⌕ Search

SEARCH · Search NASA

Results for “Polymer Science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Polycarboxylate ester adsorption on cement grains: Influence of polydispersity

Although in academic and industrial practice polymers are typically described by their average molecular parameters, most often they display a polydispersity both in size and in properties. In this paper, we focus on the influence of polydispersity on the adsorption of polycarboxylate ester on cement grains and on its influence on the definition of a so-called affinity of the polymer to the surface. We first show that a constant fraction of a polydisperse polycarboxylate ester always adsorbs no matter the availability of adsorption sites. We moreover suggest from our measurements and from scaling laws from literature that the degree of polydispersity in the structure of polycarboxylate ester should affect adsorption at both low and intermediate dosages and hydrodynamic radii in solution. However, it shall not have a major influence on polymer layer thickness or saturation dosage.

36 MATERIALS SCIENCE↗

Evaluation Of Automated Low-Field Nuclear Magnetic Resonance (NMR) Relaxometry For Analysis Of Silicone Polymers

Screening studies and Design of Experiments (DoE) were performed to evaluate measurement variation of a new, non-destructive Nuclear Magnetic Resonance (NMR) test system designed to assess age-induced degradation of Outer Pressure Pads (OPP). The test method and results from 54,275 measurements are described. A reduction in measurement error was obtained after metal support struts were replaced with plastic support struts adjacent to the front position of the test chamber. However, remaining interference and a lack of detecting any age-related degradation prevent the use of the NMR system as a non-destructive surveillance test for OPPs. A cursory evaluation of the system with cellular silicone samples obtained more uniform results with increased error as measurements approached the sample’s edge.

36 MATERIALS SCIENCE↗

Characterization of Ion Profiles in Light-Emitting Electrochemical Cells by Secondary Ion Mass Spectrometry

Ion profiles in polymer light-emitting electrochemical cells are known to significantly affect performance and stability, but are not easily measured. Here, secondary ion mass spectrometry is used to investigate ion profiles in both dynamic and chemically fixed junction devices. Results indicate lower reversibility of dynamic junctions and a more significant time delay for ion redistribution than previously expected, but confirm the complete immobilization of ions in chemically fixed junction devices. When compared with prior studies analyzing the electric field profiles in similar devices, these results help to elucidate the roles of ion distribution and electrochemical doping in LECs.

36 MATERIALS SCIENCE↗

Development of Tailor-Made Superabsorbent Polymers: Review of Key Aspects from Raw Material to Kinetic Model

The ability of superabsorbent polymers (SAP) to absorb and retain a large amount of water and/or aqueous solution enables their applications in areas such as agriculture, medicine and water treatment. This versatility has attracted the attention of researchers interested in developing new materials, especially bio-based polymers. As a result, there are numerous studies reporting different types of monomers and crosslinks to produce SAP. Conversely, in the literature there is a lack of discussion of the modeling approaches to describe SAP production. This paper makes a comprehensive and systematic review of the main issues for the synthesis of new SAP materials: monomer and crosslink types, as well as the kinetic model. A database on the raw materials to produce SAP for the main applications should be useful for those interested in producing new SAP materials. The mathematical model correlates structural properties with the synthesis conditions, thus supporting the development of tailor-made products.

36 MATERIALS SCIENCE↗

Nanofabrication with Metallopolymers: Recent Developments and Future Perspectives

We found that synthetic polymers containing metals and metal centers have experienced rapid growth in the last two decades. Metal-containing polymers and these have an unprecedented role to play in modern high-tech applications including nanomanufacturing, sensing, separation and catalysis. Advancement in synthetic strategies for macromolecules has enabled the synthesis of novel, exotic and use-inspired metallopolymers. Using state-of-the-art design strategies, it is now possible to perform targeted synthesis of macromolecules with varied complexity that contain a range of metal centers either in the backbone or in the side chains of the organic moiety. Moreover, the presence of an inorganic element (metals and metal centers) in organic moieties has led to a number of new physicochemical properties while implementing novel functionality to the polymer matrix. This review covers nanotechnology influenced by distinctive features of metal-containing macromolecular systems, particularly in developing flexible, functional materials.

36 MATERIALS SCIENCE↗

Thermally Switchable Thin Films of an ABC Triblock Copolymer of Poly(n-butyl methacrylate)-poly(methyl methacrylate)-poly(2-fluoroethyl methacrylate)

The thermo-responsive behavior of polymer films consisting of novel linear triblock copolymers of poly(n-butyl methacrylate)-poly(methyl methacrylate)-poly(2-fluoroethyl methacrylate) (PnBuMA-PMMA-P2FEMA) are reported using differential scanning calorimetry (DSC), atomic forcing microscopy (AFM), X-ray photoelectron spectroscopy (XPS) and contacting angle (CA) measurements. The surface morphology, wettability and chemical structure of thin films of these triblock copolymers on silicon wafers as a function of temperature have been investigated. It has been shown that the wettability of the films is thermally switchable. Detailed structural analysis shows that thermo-responsive surface composition changes are produced. The underlying mechanism of the thermoresponsive behavior is discussed.

36 MATERIALS SCIENCE↗

Effect of cross-link density on carbon dioxide separation in polydimethylsiloxane-norbornene membranes

The development of high performance materials for CO 2 separation and capture will significantly contribute to a solution for climate change. In this work, (bicycloheptenyl) ethyl terminated polydimethylsiloxane (PDMSPNB) membranes with varied cross-link densities were synthesized via ring-opening metathesis polymerization. The developed polymer membranes show higher permeability and better selectivity than those of conventional cross-linked PDMS membrane. The achieved performance (CO 2 permeability ~ 6800 Barrer and CO 2 /N 2 selectivity ~ 14) is very promising for practical applications. The key to achieving this high performance is the use of an in-situ cross-linking method of the difunctional PDMS macromonomers, which provides lightly cross-linked membranes. By combining positron annihilation lifetime spectroscopy, broadband dielectric spectroscopy and gas solubility measurements, we have elucidated the key parameters necessary for achieving their excellent performance.

36 MATERIALS SCIENCE↗

Advancing reversible shape memory by tuning the polymer network architecture

Because of counteraction of a chemical network and a crystalline scaffold, semicrystalline polymer networks exhibit a peculiar behavior—reversible shape memory (RSM), which occurs naturally without applying any external force and particular structural design. There are three RSM properties: (i) range of reversible strain, (ii) rate of strain recovery, and (iii) decay of reversibility with time, which can be improved by tuning the architecture of the polymer network. Different types of poly(octylene adipate) networks were synthesized, allowing for control of cross-link density and network topology, including randomly cross-linked network by free-radical polymerization, thiol–ene clicked network with enhanced mesh uniformity, and loose network with deliberately incorporated dangling chains. It is shown that the RSM properties are controlled by average cross-link density and crystal size, whereas topology of a network greatly affects its extensibility. In conclusion, we have achieved 80% maximum reversible range, 15% minimal decrease in reversibility, and fast strain recovery rate up to 0.05 K –1 , i.e., ca. 5% per 10 s at a cooling rate of 5 K/min.

36 MATERIALS SCIENCE↗

Shockwave dissipation by interface-dominated porous structures

The advent of additive manufacturing (AM) has enabled topological control of structures at the micrometer scale, transforming the properties of polymers for a variety of applications. Examples include tailored mechanical responses, acoustic properties, and thermal properties. Porous polymer materials are a class of materials used for shock and blast mitigation, yet they frequently possess a lack of structural order and are largely developed and evaluated via trial-and-error. Here, we demonstrate control of shockwave dissipation through interface-dominated structures prepared by AM using 2-photon polymerization. A fractal structure with voids, or free surfaces, arranged less than 100 μm apart, allows for rarefaction interactions on the timescale of the shockwave loading. Simulations and dynamic x-ray phase contrast imaging experiments show that fractal structures with interfaces assembled within a “critical” volume reduce shockwave stress and wave velocity by over an order of magnitude within the first unit cell.

36 MATERIALS SCIENCE↗

Roles of Interfacial Tension in Regulating Internal Organization of Low Bandgap Polymer Bulk Heterojunction Solar Cells by Polymer Additives

The role of a tertiary polymer-based additive is investigated in increasing the efficiency of inverted low bandgap polymer:fullerene bulk heterojunction (BHJ) solar cells. Charge separation in polymer BHJ solar cells relies on the phase separation between electron accepting fullerene derivatives and photoactive polymers. Proper distribution of individual phases of suitable crystallinities within the active layer is a key factor for efficient charge transport/extraction and high photovoltaic performance. Here in this paper, it is demonstrated that the minor addition of a tertiary amorphous polymer, polystyrene (PS), with optimized molecular weights can increase the overall photovoltaic efficiency of poly[N-9-heptadecanyl-2,7-carbazole-alt-5,5-(4,7-di-2-thienyl-2,1,3-benzothiadiazole)]:phenyl-C 61 butyric acid methyl ester (PCDTBT:PCBM) inverted BHJ solar cells, through the interfacial-tension-driven increase in crystallinities of photoactive phases and redistribution of PCBM molecules away from the top hole-collecting anode interface. Complementary studies correlating polymer interfacial tension, blend internal structure, charge transport, and photovoltaic characteristics show that tertiary, high molecular-weight polymers can serve as effective additives for improving the performance of low bandgap polymer solar cells.

25 ENERGY STORAGE↗

Highly CO 2 -permeable membranes derived from a midblock-sulfonated multiblock polymer after submersion in water

To mitigate the effect of atmospheric CO 2 on global climate change, gas separation materials that simultaneously exhibit high CO 2 permeability and selectivity in gas mixtures must be developed. In this study, CO 2 transport through midblock-sulfonated block polymer membranes prepared from four different solvents is investigated. The results presented here establish that membrane morphology and accompanying gas transport properties are sensitive to casting solvent and relative humidity. We likewise report an intriguing observation: submersion of these thermoplastic elastomeric membranes in liquid water, followed by drying prior to analysis, promotes not only a substantial change in membrane morphology, but also a significant improvement in both CO 2 permeability and CO 2 /N 2 selectivity. Measured CO 2 permeability and CO 2 /N 2 selectivity values of 482 Barrer and 57, respectively, surpass the Robeson upper bound, indicating that these nanostructured membranes constitute promising candidates for gas separation technologies aimed at CO 2 capture.

36 MATERIALS SCIENCE↗

Supercritical Drying of Wet Gel Layers Generated Inside ICF Ablator Shells

Spherical ablator shells that contain a thin layer of ultralow-density polymer foam have recently attracted attention in the inertial confinement fusion (ICF) community as they can be used to bring dopants for diagnostics and nuclear physics experiments in direct contact with the deuterium-tritium (DT) fuel or to study new ignition regimes by enabling the formation of uniform liquid DT fuel layers. We developed a method to fabricate these foam-lined ablator shells using a prefabricated ablator as a mold to cast the foam liner within the shell. One crucial component of this new approach is the removal of solvent from the ablator shells without collapsing the ultralow-density porous polymer network. In this work, we report on a supercritical drying approach with liquid carbon dioxide that provides critical information on how to produce thin layers of low-density polymer foams in ablator shells for ICF experiments. Diffusion experiments were used to study the time required for complete solvent exchange in 2-mm-inner-diameter diamond shells and the data were used to demonstrate the fabrication of uniform porous polymer films inside ablator shells.

36 MATERIALS SCIENCE↗

Polymer Composition Influence on Optical Properties of Laser-Generated Au Nanoparticles Based Nanocomposites

Au nanoparticles (AuNPs) stable colloid solution were prepared by laser ablation and fragmentation in liquid monomer isodecyl acrylate (IDA). Sizes of obtained nanoparticles were determined by scanning transmission electron microscopy (STEM) and were about 20 nm. Nanocomposites films were prepared from obtained stable colloid solution by UV-photocuring. To prepare solid polymer films different crosslinking diacrylates were used. Third-order nonlinear optical responses of prepared nanomaterials with different polymer matrix compositions were estimated by z-scan technique and compared.

36 MATERIALS SCIENCE↗

Genetically Engineered Elastomeric Polymer Network through Protein Zipper Assembly

The rich palette of chemical and functional diversity found within peptides has driven the recent interest in bottom–up assembly of soft polypeptide–based materials. Herein, we describe the creation of a novel helix–elastin like polymer or HELP. HELP marries the specificity of coiled–coil interactions with the elasticity and stimuli–responsive behavior of elastin, a class of polymers with extraordinary elasticity. We used Rosetta to computationally design highly specific protein helical zippers to connect short elastin segments. As a result, the programmed pairing between the helical blocks of two individual chains produced a genetically encoded material that, when deposited on a substrate, formed a flexible and porous 2D planar network with controllable porosity that responds dynamically upon application of stimuli.

36 MATERIALS SCIENCE↗

Surface Morphology and Electrical Properties of Cu 3 BTC 2 Thin Films Before and After Reaction with TCNQ

HKUST-1 or Cu 3 BTC 2 (BTC = 1,3,5-benzenetricarboxylate) is a prototypical metal–organic framework (MOF) that holds a privileged position among MOFs for device applications, as it can be deposited as thin films on various substrates and surfaces. Recently, new potential applications in electronics have emerged for this material when HKUST-1 was demonstrated to become electrically conductive upon infiltration with 7,7,8,8-tetracyanoquinodimethane (TCNQ). However, the factors that control the morphology and reactivity of the thin films are unknown. Here, we present a study of the thin-film growth process on indium tin oxide and amorphous Si prior to infiltration. From the unusual bimodal, non-log-normal distribution of crystal domain sizes, we conclude that the nucleation of new layers of Cu 3 BTC 2 is greatly enhanced by surface defects and thus difficult to control. We then show that these films can react with methanolic TCNQ solutions to form dense films of the coordination polymer Cu(TCNQ). This chemical conversion is accompanied by dramatic changes in surface morphology, from a surface dominated by truncated octahedra to randomly oriented thin platelets. The change in morphology suggests that the chemical reaction occurs in the liquid phase and is independent of the starting surface morphology. The chemical transformation is accompanied by 10 orders of magnitude change in electrical conductivity, from <10 –11 S/cm for the parent Cu 3 BTC 2 material to 10 –1 S/cm for the resulting Cu(TCNQ) film. In conclusion, the conversion of Cu 3 BTC 2 films, which can be grown and patterned on a variety of (nonplanar) substrates, to Cu(TCNQ) opens the door for the facile fabrication of more complex electronic devices.

2D nucleation↗

Glassy interphases reinforce elastomeric nanocomposites by enhancing percolation-driven volume expansion under strain

For nearly a century, introduction of nanoparticles to elastomers has yielded extraordinarily tough nanocomposites that are critical to technologies from actuators to tires. The mechanisms by which this reinforcement occurs have nevertheless remained a central open question in material science. One widely debated hypothesis posits that strong interactions between polymer and particles induce "glassy bridges" that cement particles into a cohesive percolating network that resists elongation. Here, molecular dynamics simulations show that glassy particle shells do not primarily provide elongational cohesion. Instead, they amplify an underlying mechanism wherein competition between filler and elastomer networks causes the elastomer's volume to increase on deformation. This induces contributions from the elastomer's bulk modulus, which is of order 1000 times larger than its Young's modulus. These findings establish a unified understanding of low-strain reinforcement in filled elastomers as emanating from volumetric competition between coexisting particulate and elastomeric networks. This reframes and unifies our understanding of low-strain reinforcement, provides a clear-cut diagnostic for the presence of glassy bridging, and offers a new design principle for tough elastomeric nanocomposites.

Computational Physics (physics.comp-ph)↗

Highly Recyclable Thermosets for Lightweight Composites

The objective of this project, Highly Recyclable Thermosets for Lightweight Composites (DOE Award DE-EE0009297), was to develop recyclable carbon fiber–reinforced polymer (CFRP) composites that are more energy efficient to produce than existing technologies while achieving superior mechanical performance and enabling closed-loop material recovery. Specifically, the project targeted vitrimer-based composites with tensile strength at least 20% higher than baseline recyclable polypropylene composites, retention of greater than 95% of tensile strength after multiple recycling and reprocessing cycles, recovery of carbonate monomers through depolymerization, and recovery of greater than 95% of carbon fibers of reusable quality. The project was carried out by The University of Akron in collaboration with Pacific Northwest National Laboratory and Raytheon Technologies Research Center.

36 MATERIALS SCIENCE↗