Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reusable”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Amorphous 2D Materials – A Novel Platform for Remote Epitaxy and Nanopatterned Epitaxy of III-V Semiconductors with Low Decomposition Temperatures

III-V semiconductor materials such as indium phosphide (InP) offer outstanding photonic properties that outperforms silicon, but the cost of these wafers is extremely expensive. Although reusing original wafers can effectively minimize the cost, current techniques for wafer recycling of these substrates add significant costs in fabrication, nullifying the cost savings by reusing the wafers. Besides, unlike other III-V materials such as gallium arsenide (GaAs), commonly used epitaxial lift-off method for wafer recycling is not well studied for materials like InP due to lack of lattice-matched sacrificial layers, which makes reusing these wafers more difficult. Remote epitaxy and nanopatterned epitaxy are newly discovered methods that enable single-crystal growth of III-V semiconductor thin films and easy exfoliation of these grown films, thus promising for a new cost-effective pathway of reusing wafers. However, previous methods of transferring two-dimensional (2D) materials, which use polymethyl methacrylate (PMMA) or metal stressor layers to transfer 2D materials grown on foreign substrates like copper (Cu) or silicon carbide (SiC), introduce defects and damages on the 2D layer and/or substrates during the transfer process. Remote epitaxial and nanopatterned epitaxial films grown on the damaged 2D layer/substrate suffer from lower crystal quality and imperfect exfoliation, which undermines wafer reusability and device performance. Here we report the MBE growth of amorphous boron nitride (a-BN) on InP wafers at low temperature that enabled improved quality of remote epitaxial and nanopatterned epitaxial films and their perfect exfoliation. We show fully covered a-BN on InP substrates despite their low decomposition temperatures. The surface of a-BN coated InP substrate remains smooth with a RMS roughness of around 3Â. We also demonstrate 100% coverage of single-crystal InP thin films grown on a-BN, with the film's quality significantly improved compared to the case of transferred 2D materials. In addition, the growth and exfoliation were successfully repeated multiple times, proving the feasibility for InP wafer recycling. Through this low temperature MBE growth approach with remote epitaxy and nanopatterned epitaxy, we successfully demonstrate large-scale flexible thin film exfoliation and recycling of InP substrates, which will lead to new opportunities in InP thin film-based photonics and novel heterostructures with significantly reduced cost.

Lu, Kuangye↗

Amorphous 2D Materials – A Novel Platform for Remote Epitaxy and Nanopatterned Epitaxy of III-V Semiconductors with Low Decomposition Temperatures

III-V semiconductor materials such as indium phosphide (InP) offer outstanding photonic properties that outperforms silicon, but the cost of these wafers is extremely expensive. Although reusing original wafers can effectively minimize the cost, current techniques for wafer recycling of these substrates add significant costs in fabrication, nullifying the cost savings by reusing the wafers. Besides, unlike other III-V materials such as gallium arsenide (GaAs), commonly used epitaxial lift-off method for wafer recycling is not well studied for materials like InP due to lack of lattice-matched sacrificial layers, which makes reusing these wafers more difficult. Remote epitaxy and nanopatterned epitaxy are newly discovered methods that enable single-crystal growth of III-V semiconductor thin films and easy exfoliation of these grown films, thus promising for a new cost-effective pathway of reusing wafers. However, previous methods of transferring two-dimensional (2D) materials, which use polymethyl methacrylate (PMMA) or metal stressor layers to transfer 2D materials grown on foreign substrates like copper (Cu) or silicon carbide (SiC), introduce defects and damages on the 2D layer and/or substrates during the transfer process. Remote epitaxial and nanopatterned epitaxial films grown on the damaged 2D layer/substrate suffer from lower crystal quality and imperfect exfoliation, which undermines wafer reusability and device performance. Here we report the MBE growth of amorphous boron nitride (a-BN) on InP wafers at low temperature that enabled improved quality of remote epitaxial and nanopatterned epitaxial films and their perfect exfoliation. We show fully covered a-BN on InP substrates despite their low decomposition temperatures. The surface of a-BN coated InP substrate remains smooth with a RMS roughness of around 3Å. We also demonstrate 100% coverage of single-crystal InP thin films grown on a-BN, with the film's quality significantly improved compared to the case of transferred 2D materials. In addition, the growth and exfoliation were successfully repeated multiple times, proving the feasibility for InP wafer recycling. Through this low temperature MBE growth approach with remote epitaxy and nanopatterned epitaxy, we successfully demonstrate large-scale flexible thin film exfoliation and recycling of InP substrates, which will lead to new opportunities in InP thin film-based photonics and novel heterostructures with significantly reduced cost.

Lu, Kuangye↗

Dissolution of a Can Carrier Pin in Concentrated Nitric Acid

H=Canyon will be dissolving Fast Critical Assembly (FCA) fuel from the Japan Atomic Energy Agency (JAEA). The FCA fuel will be dissolved in the electrolytic dissolver in a solution that is a 50 wt.% nitric acid (HNO 3 ), 0.5 g/l gadolinium (Gd), and 0.05 M potassium fluoride (KF). The nitric acid concentration is expected to decrease during the batch process from 10.3 to 7 M. The temperature of the nitric acid solution may be as low as 15 °C. The fuel can will be placed in the dissolver basket insert utilizing a reusable charging device. The charging device is a coated stainless-steel rod with a clevis design. The charging device employs a linchpin to secure the FCA fuel can as it is being charged into the H-canyon dissolver. Prior to beginning the electrolytic dissolution process, the pin will be dissolved, the fuel can will remain in the dissolver basket insert and the charging device will be removed. Currently the time necessary for complete dissolution of the pin is unknown and thus the timing of the removal of the charging device cannot be planned. This process is to be performed remotely and therefore complete dissolution of the pin will not be able to be visually determined. The pin will be made of a material that dissolves in the concentrated nitric acid solution in the dissolver. The facility desired to know the time that the pin would be dissolved so that the charging device for the FCA can could be removed from the dissolver. In particular, the pin dissolution time as a function of the nitric acid concentration and the temperature was desired. The facility would like to ensure that the solution environment was such that the charging device could be removed within an operational shift (8-12 hours).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Multi-Formalism Modeling for Disaster Resilience, Forecasting, and Response

Disaster response preparedness, risk mitigation, and effective post-event response are critical for national security, public health, and economic integrity. For areas impacted by extreme events, timely and accurate impact assessments of lifeline infrastructures are critical. Traditional disaster management and situational awareness platforms are not capable of handling the massive influx of available information from traditional and non-traditional sources. Next-generation analytic assessment approaches, where use of dynamically sourced, heterogeneous data with near real-time availability are integrated into a continually-updated analytics framework. The objective of this research was to develop a foundational multi-formalism modeling platform to integrate novel data sources for use in improving situational awareness after a disaster event. Specifically, to 1) provide an architecture for machine-learning based data fusion various multi-sensor datasets; 2) classify, geolocate, and temporally bin novel data sources for use in spatially-enabled machine-learning based data fusion; and 3) derive confidence-based observation data with machine-learning based prediction to fill spatial and temporal observation gaps. This project developed a reusable cloud-based pipeline architecture for ingesting, storing, and analyzing relevant data, executing a range of deep-learning models, and visualize the information geographically. The pipeline development was informed by previous PNNL investments (StreamKit) and built upon leading-edge technologies consisting of: 1) a raw datastore; 2) a data enrichment pipeline with custom and third-party analytics; 3) enriched data storage; and 4) a custom UI to display the enriched data. Machine learning/deep learning models were selected and tested to classify social media images for relevancy and presence of flood waters. Our custom trained relevance models were run on a validation dataset and the overall accuracy of the relevance classifiers ranged from 65% to 90%. We found that convolutional neural network (CNN) models were both faster and more accurate than more traditional machine learning models. We applied the relevance classifier to remove non-relevant images and then undertook a limited training of CNN models to detect flood on ~1,800 labeled images. The testing accuracy of the flood detection models were ~88%. To improve the geographic location of both social media and oblique aerial images we tested a multi-step workflow built on a pre-trained deep-learning model. To identify similarity features from test and reference scenes, we applied the Xception and Faiss models to a set of test images with inaccurate spatial locations, as well and precisely-located reference scenes from the general area. Matching reference scenes to the test scenes with the closest similarity index had limited success in improving the precision of test scene location and additional methods have been identified for testing. Data fusion between authoritative geographic data (satellite imaging) and non-authoritative crowdsourced data is an underlying theme throughout this research and methods are tested bring these data to a common geographic form through feature matching and transformations. The automated extraction of supporting information for disaster response from oblique aerial images or ground-level social media images is accomplished through semantic image segmentation and transformation. The non-authoritative data are used to validate the authoritative data collections and processing and optionally, t+0 flood models. In addition, the common form geographic data are combined with other static landscape features to develop spatially-explicit training vectors used in deep generative statistical inference models to develop complex non-linear relationships in static and dynamic data and ultimately derive a spatially continuous and probabilistic assessment of flood damage with the event domain.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Understanding Technical and Psychosocial Barriers to Realizing FAIR Data Process

The present study investigates barriers and facilitators to the implementation of Findable, Accessible, Interoperable, and Reusable (FAIR) data processes within the Physical Sciences Division of the Computational Sciences Directorate (PCSD). Employing a dual-method approach consisting of surveys and focus group discussions, the study aims to illuminate the complex interplay between technical and psychosocial factors that influence FAIR data adoption.

42 ENGINEERING↗

Quantum Computing for Biomedical Computational and Data Sciences: A Joint DOE-NIH Roundtable

The overlap of quantum computing and biomedical research, while less explored, presents significant near-term opportunities. The Department of Energy (DOE) and the National Institutes of Health (NIH) are interested in exploiting the DOE community’s capabilities and expertise in quantum computing to potentially advance biomedical research, targeting fundamental studies of biological and molecular structures, understanding of human health as well as mental and physical disorders and diseases, and deriving insights from clinical data. NIH’s approach to quantum computing is guided by its Strategic Plan for Data Science, emphasizing the importance of findable, accessible, interoperable, and reusable (FAIR) data assets, security and privacy of data, and efficient computing and storage. DOE’s Office of Science (SC), and more specifically the Advanced Scientific Computing Research (ASCR) program, supports quantum information science (QIS) research, contributing to a unique portfolio of quantum computing and communications expertise. This roundtable was assembled to consider the opportunities and challenges in the near-, medium-, and long-term at the intersection of quantum computing, data science, and biomedical research and how these could be addressed through inter-agency collaboration and multi-disciplinary partnerships.

59 BASIC BIOLOGICAL SCIENCES↗

Living Filter Designs for In-Line Recovery and Sorting of Critical materials

This project explored “bio-mining” of critical materials from electronic waste (E-waste) streams by developing living filters arrays capable of recovering these materials, focusing on the platinum group metals (PGMs) and rare earth elements (REEs). While highly toxic, E-waste is considered a valuable “urban mine” as it contains critical materials such as PGMs and REEs with orders of magnitude higher purity than the richest ores. The aim of the project was to: (1) develop mechanically robust, silk-based biomaterial filtration membranes that can capture REEs from dilute aqueous waste; (2) design and build 3D bioprinted living filters containing encapsulated electrochemically active bacteria (EAB) capable of bio-reducing PGMs and recovering them from waste streams; and (3) constructing combined living filter arrays using both components to efficiently capture REE and PGM from the same waste stream. The developed silk-based filtration membranes were self-assembled using silk-nanofibrils (SNFs) derived from silkworm (Bombyx mori) cocoons in conjunction with recombinant silk-elastin-like proteins (SELPs), which contained lanthanide-binding peptide tags (LBTs) with a high affinity and specificity towards REEs. These 100% biodegradable protein-based membranes were capable of recovering up to 85% of model REE ions (Tb 3+ ) filtered through the membrane, with ~50% recovery achieved in the presence of high concentrations (100X) of common interfering metals (Ca 2+ , Cu 2+ , Fe 3+ , Zn 2+ ). REE captured by the membranes were easily recovered by applying a low pH desorption buffer. The membranes also demonstrated substantial reusability, with only a 30% loss in binding capacity after 4 cycles of REE binding and recovery. To recover the PGMs, we created a bottom-up assembling strategy to construct a living hydrogel composed of a seamlessly integrated living catalyst, Shewanella loihica PV-4 (PV-4), for metal reduction, and their structural and functional linkers, bio-reduced graphene oxide (B-rGO). This hydrogel demonstrated a close to 90% recovery of model metal ions, Pd, from a simulated e-waste leaching stream with minimum-to-no biomass production. It’s also worth noting that the Pd recovery is initiated immediately after the introduction of living hydrogel, compared to conventional biocarriers that required start-up times within hours to days. Overall, these living hydrogels demonstrated superior bioactivity, structural integrity, and agility over existing biocarriers, which offers extensive opportunities to advance the biological metal recovery with unparallel efficiency, reduced energy/material consumption, and minimal environmental impact.

36 MATERIALS SCIENCE↗

Low-cost, high-efficiency III-V photovoltaics enabled by remote epitaxy through graphene (Final Technical Report)

One of the most important outcomes of this project was that the team developed a method to directly grow graphene layer in wafer-scale on III-V substrates. Conventionally, graphene had to be transferred for remote epitaxy, which has imposed significant challenges in scalability, film quality, and substrate recycling, due to the transfer-related issues. The newly developed method of directly forming 2D layers by Metal-Organic Chemical Vapor Deposition (MOCVD) has realized wafer-scale, defect-free graphene formation for remote epitaxy, which has huge implications not only for solar cells but also in expanding the scalability and the possibility for heterointegration with dissimilar material platforms. Another important outcome was on better understanding of remote epitaxy mechanism. The growth of III-V on graphene is vastly different from directly growing films on III-V substrates, because the surface energy of graphene is very small, meaning that the nucleation density on graphene will be much lower than exposed III-V surfaces. Also, the graphene and the interface properties critically affect remote interaction through graphene. With this obtained knowledge regarding III-V remote epitaxy, we were able to achieve wafer-scale single-crystalline remote epitaxy, 100% exfoliation of the remote epitaxial films, as well as multiple times of GaAs wafer reusability demonstration. The general rule of thumbs found during this project will be a stepping stone for the growth and fabrication of various high-performance devices by remote epitaxy. Lastly, because remote epitaxy and 2DLT offer a pathway to isolate single-crystal membranes from the host wafers, the wafer-scale remote epitaxy processes developed in this project could open up pathways for new functionality and multi-functionality by heterointegration of remote epitaxially formed membranes.

14 SOLAR ENERGY↗

Evaluation of Dissolvable Additively Manufactured Molds and Supports for Electroimpacts Innovative Additive Manufacturing Process

Electroimpact inc. has developed a new additive manufacturing process involving continuous fiber reinforcement along with high-strength thermoplastics. A unique part of this process includes using additive manufacturing to print a base geometry that is then used as a tool for continuous fiber placement. Ideally the tool should be disposable and cost effective. After printing the base tool, continuous fiber is printed on top of the tool using a secondary additive head on the same system to create the final printed part. After continuous fiber printing is completed, the tool is removed and disposed of to leave only the final desired structure. Materials used for the base tool have several requirements that must be met in order to complete this process. First, the material must be rigid and strong enough to support the loads from the secondary printing operation (continuous fiber printing). In addition, the material must be able to adhere to the secondary process material as well be capable of being removed such that the only remaining structure is continuous fiber composite. Using innovative soluble materials allows for parts to be produced through additive with molds that are produced as non-reusable one-off shapes and sizes.

36 MATERIALS SCIENCE↗

Towards Unlocking Insights from Logbooks Using AI

Electronic logbooks contain valuable information about activities and events concerning their associated particle accelerator facilities. However, the highly technical nature of logbook entries can hinder their usability and automation. As natural language processing (NLP) continues advancing, it offers opportunities to address various challenges that logbooks present. This work explores jointly testing a tailored Retrieval Augmented Generation (RAG) model for enhancing the usability of particle accelerator logbooks at institutes like DESY, BESSY, Fermilab, BNL, SLAC, LBNL and CERN. The RAG model uses a corpus built on logbook contributions and aims to unlock insights from these logbooks by leveraging retrieval over facility datasets, including discussion about potential multimodal sources. Our goals are to increase the FAIR-ness (findability, accessibility, interoperability, and reusability) of logbooks by exploiting their information content to streamline everyday use, to enable macro-analysis for root cause analysis, and to facilitate problem-solving automation.

43 PARTICLE ACCELERATORS↗

Filling in Subsurface Storage Open Data Gaps - Updates to CCS Data Availability on EDX and EDX Spatial (FWP-1022465)

There is a need to preserve and efficiently access data resources to drive the next generation of research and development while ensuring compliance with DOE regulations. Over the last 10+ years, there has been ongoing efforts by the DOE Carbon Storage Program to ensure that there is effective data curation and preservation of DOE funded research leveraging the NETL-FECM data repository, the Energy Data eXchange (EDX). This talk presents updates about ongoing efforts to continue to support the mission of ensuring that carbon storage data is findable, accessible, interoperable, and reusable to the carbon storage stakeholder community through EDX and EDX Spatial. Presented at the NETL Carbon Management Review Meeting, Pittsburgh, 2024.

Morkner, Paige↗

The Integration and Mapping of an Open-Source National Well Resource to Inform Geologic Carbon Storage Site Selection and Risk Prevention: The CO2-Locate Database

Geologic carbon storage (GCS) offers a way to capture and permanently store CO₂ from fossil fuel operations in underground geologic structures, aiding in the transition to a carbon-neutral energy economy. However, CO₂ injection sites can experience gas leakage through existing wells that penetrate storage reservoirs, making knowledge of well locations and characteristics crucial for permitting, infrastructure reusability, and risk assessment in GCS. Currently, public wellbore data from state, federal, and tribal entities are inconsistent and fragmented, with gaps and redundancies. To address this, the National Energy Technology Laboratory (NETL) developed CO2-Locate, an open-source, geospatial database and online application. CO2-Locate integrates over 50 data sources from federal, state, and tribal entities, creating a standardized national well database. Funded by the Bipartisan Infrastructure Law, the database is publicly available through the Energy Data eXchange (EDX) and viewable via the CO2-Locate web mapping application. This tool allows users to query, filter, and visualize well data to support GCS planning, permitting, and risk assessments. This presentation covers the methods used to create CO2-Locate, including data acquisition, processing, attribute mapping, and integration, much of which is automated for future updates. The web mapping application and its role in GCS site selection will also be discussed.

Tetteh, Daniel A.↗

Workflows Community Summit 2024: Future Trends and Challenges in Scientific Workflows

The 2024 Workflows Community Summit report presents the outcomes of a three-day international gathering that brought together 109 experts from 18 countries to discuss future trends and challenges in scientific workflows. The summit focused on six key areas: time-sensitive workflows, convergence of AI and HPC workflows, multi-facility workflows, heterogeneous HPC environments, user experience and interfaces, and FAIR computational workflows. Discussions highlighted emerging challenges such as integrating AI with traditional HPC, managing workflows across diverse facilities, addressing heterogeneity in computing environments, and ensuring workflows are findable, accessible, interoperable, and reusable (FAIR). The report outlines recent advances, ongoing challenges, and provides recommendations for each topic area, emphasizing the need for standardization, improved interoperability, and the development of more sophisticated tools and frameworks to support the evolving landscape of scientific workflows in the era of exascale computing and AI integration.

97 MATHEMATICS AND COMPUTING↗

AIR Framework for Physics-Inspired Artificial Intelligence in High Energy Physics (Final Report)

The FAIR4HEP project was a collaboration between Argonne National Laboratory, University of Illinois Urbana-Champaign, Massachusetts Institute of Technology, University of Minnesota, and the University of California San Diego funded by the US Department of Energy, Office of Science, Office of Advanced Scientific Research (ASCR) from 2020 to 2023. The primary focus of the FAIR4HEP project was to advance our understanding of the relationship between data and artificial intelligence (AI) models by exploring relationships among them through the development of findable, accessible, interoperable, and reusable (FAIR) frameworks. Using high-energy physics (HEP) as the science driver, this project developed a FAIR framework to advance our understanding of AI, provide new insights to apply AI techniques and provide an environment where novel approaches to AI can be explored. This final report summarizes the accomplishments of the MIT group.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Novel Electrowinning Reactor for the Energy-Efficient, Low- Cost Production of Rare Earth Metals

This project developed a novel neodymium (Nd) electrowinning reactor for energy-efficient electrowinning of Nd metal. Throughout this project we have developed an alternative chloride based molten salt electrolysis process. Our process lowers the specific electrical energy consumption compared to the state of the art, while producing reusable chlorine gas and eliminating direct CO2 and PFC emissions. Facilities required for implementing the project were setup and designs were finalized, and a standard operating procedure for safe operation of high temperature electrolysis cells was written. The electrowinning reactor was designed and constructed. Electrolysis experiments confirmed the ability to reproducibly electrowin Nd metal on a Mo cathode. The current efficiency for Nd electrowinning was measured as a function of applied current density in the presence of the separator. Successful electrowinning of Nd sponge at high current densities (200 mA/cm2 and above) at a current efficiency >80% was demonstrated using multiple techniques. Stable Nd electrowinning up to 10h at 250 mA/cm2 was demonstrated. All of these design advancements were used to develop a techno-economic and life cycle assessment model that demonstrated that our process could be operated at cost of less than $0.20/kg-Nd (~30% lower compared to state of the art when comparing electrolysis energy cost) with a >20% total reduction in global warming potential compared to the state of the art while generating no direct CO2 or perfluorocarbon emissions.

42 ENGINEERING↗

HPC-FAIR: A Framework Managing Data and AI Models for Analyzing and Optimizing Scientific Applications

The increasing reliance on machine learning (ML) to analyze and optimize large-scale scientific applications on supercomputers faces a significant bottleneck: the lack of readily available, high-quality training datasets and the difficulty in reusing existing AI models. This project was motivated by the urgent need to address the “FAIR” principles (Findability, Accessibility, Interoperability, Reusability) for both training datasets and AI models in the high-performance computing (HPC) domain. The project developed HPC-FAIR, a high-performance computing data management framework designed to centralize HPC-related datasets and AI models within a unified hub. To ensure interoperability, the framework established a standardized representation and vocabulary (ontology) for both data and models. HPC-FAIR also implemented automated workflows to streamline data processing, model access, and benchmarking. Additionally, the project focused on optimizing data harnessing efficiency through advanced techniques like deep reuse and compression-based analytics.

97 MATHEMATICS AND COMPUTING↗

FAIR Framework for Physics-Inspired Artificial Intelligence in High Energy Physics (Final Report)

The FAIR4HEP project was a collaboration between Argonne National Laboratory, University of Illinois Urbana-Champaign, Massachusetts Institute of Technology, University of Minnesota, and University of California San Diego funded by the US Department of Energy, Office of Science, Office of Advanced Scientific Research (ASCR) from 2020 to 2024. The primary focus of the FAIR4HEP project was to advance our understanding of the relationship between data and artificial intelligence (AI) models by exploring relationships among them through the development of findable, accessible, interoperable, and reusable (FAIR) frameworks. Using high-energy physics (HEP) as the science driver, this project developed a FAIR framework to advance our understanding of AI, provide new insights to apply AI techniques, and provide an environment where novel approaches to AI can be explored. This final report summarizes the accomplishments of the University of Illinois group.

43 PARTICLE ACCELERATORS↗

Multiscale Nuclear-Electronic Orbital Quantum Dynamics in Complex Environments

Many renewable energy conversion processes rely on the movement of protons as well as electrons through either electrocatalysis or photoexcitation. The simulation of such processes requires a quantum mechanical description of coupled nuclear-electronic dynamics in a solvent or heterogeneous chemical environment. The overall objective of this project is the development of theoretical and computational capabilities for simulating nuclear-electronic quantum dynamics in complex environments and the creation of high-performance, open-source software. This multiscale framework will enable simulations of the real-time dynamics of nonequilibrium excited state proton-coupled electron transfer, quantum decoherence, vibronic energy transfer, and ultrafast radiolysis, as well as their associated time-resolved multidimensional spectroscopies. An important outcome of this project will be a sustainable, reusable, and interoperable open-source software ecosystem. This software will be designed for emerging exascale and future national leadership computers. Another key outcome will be a multiscale quantum dynamics method and software enabling simulations of nonequilibrium nuclear-electronic quantum dynamics in complex environments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗