Search NASA⌕ Search

SEARCH · Search NASA

Results for “Simulation techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Earth resources mission performance studies. Volume 2: Simulation results

Simulations were made at three month intervals to investigate the EOS mission performance over the four seasons of the year. The basic objectives of the study were: (1) to evaluate the ability of an EOS type system to meet a representative set of specific collection requirements, and (2) to understand the capabilities and limitations of the EOS that influence the system's ability to satisfy certain collection objectives. Although the results were obtained from a consideration of a two sensor EOS system, the analysis can be applied to any remote sensing system having similar optical and operational characteristics. While the category related results are applicable only to the specified requirement configuration, the results relating to general capability and limitations of the sensors can be applied in extrapolating to other U.S. based EOS collection requirements. The TRW general purpose mission simulator and analytic techniques discussed in this report can be applied to a wide range of collection and planning problems of earth orbiting imaging systems.

Source record↗

Comparisons of flight measurements with predictions from aeroelastic models in the NASA Langley Transonic Dynamics Tunnel

The NASA Langley Transonic Dynamics Tunnel, which has a variable density Freon-12 (or air) test medium, was designed for the study of dynamics and aeroelastic problems of aerospace vehicles. During the 15 years of operation of this facility there have been various opportunities to compare wind tunnel and flight test results. Some of these opportunities arise from routine flight checks of the prototype, others from carefully designed comparative wind tunnel and flight experiments. Data obtained from various sources is presented. The topics covered are: gust and buffet response, control surface effectiveness, flutter, and active control of aeroelastic effects. Some benefits and shortcomings of Freon-12 as a test medium are also discussed. Although areas of uncertainly are evident and there is a continuing need for improvements in model simulation and testing techniques, the results indicate that predictions from aeroelastic model tests are, in general, substantiated by full scale flight tests.

Reed, W. H., III↗

Comparison with test data and application of aerodynamic coefficients computed for unfinned axisymmetric bodies using a modified viscous crossflow method

Aerodynamic coefficients computed using a modified viscous crossflow method are verified with test data and shown to compare favorably for the general class of sounding rocket reentry bodies. Next, several reentry predictions are compared with the actual reentry plus a discussion of characteristic traits shown in both. Then a detailed study of the effects of initial conditions on maximum dynamic pressure (q), q at Mach 1 and at 20,000 feet (nominal drogue deployment altitude) will be presented and discussed. These results prove that reentry simulations using this technique are applicable to sounding rocket reentry bodies.

Laudadio, J. F.↗

Computer aided nonlinear electrical networks analysis

Techniques used in simulating an electrical circuit with nonlinear elements for use in computer-aided circuit analysis programs are described. Elements of the circuit include capacitors, resistors, inductors, transistors, diodes, and voltage and current sources (constant or time varying). Simulation features are discussed for dc, ac, and/or transient circuit analysis. Calculations are based on the model approach of formulating the circuit equations. A particular solution of transient analysis for nonlinear storage elements is described.

Slapnicar, P.↗

Correlation with flight of some aeroelastic model studies in the NASA Langley transonic dynamics tunnel

The NASA Langley transonic dynamics tunnel, which has a variable density Freon-12 (or air) test medium, was designed specifically for the study of dynamics and aeroelastic problems of aerospace vehicles. During the 15 years of operation of this facility, there have been various opportunities to compare wind tunnel and flight test results. Some of these opportunities arise from routine flight checks of the prototypes; others, from carefully designed comparative wind-tunnel and flight experiments. Such data obtained from various published and unpublished sources are presented. The topics covered are: gust and buffet response, control surface effectiveness, flutter, and active control of aeroelastic effects. Some benefits and shortcomings of Freon-12 as a test medium are also discussed. Although areas of uncertainty are evident and there is a continuing need for improvements in model simulation and testing techniques, the results presented indicate that predictions from aeroelastic model tests are, in general, substantiated by full scale flight tests.

Reed, W. H., III↗

System dynamics and simulation of LSS

Large Space Structures have many unique problems arising from mission objectives and the resulting configuration. Inherent in these configurations is a strong coupling among several of the designing disciplines. In particular, the coupling between structural dynamics and control is a key design consideration. The solution to these interactive problems requires efficient and accurate analysis, simulation and test techniques, and properly planned and conducted design trade studies. The discussion presented deals with these subjects and concludes with a brief look at some NASA capabilities which can support these technology studies.

Ryan, R. F.↗

Numerical solution of the Navier-Stokes equations for arbitrary two-dimensional multi-element airfoils

The development of a numerical simulation of time dependent, turbulent, compressible flow about two dimensional multi-element airfoils of arbitrary shape is described. The basis of this simulation is a technique of automatic numerical generation of coordinate systems fitted to the multiple bodies regardless of their number or shape. Procedures developed whereby the coordinate lines are automatically concentrated in the boundary layer at any Reynolds number are discussed. The compressible turbulent solution involves an algebraic eddy viscosity turbulence model. The laminar version was run for transonic flow at free stream Mach numbers up to 0.9.

Thompson, J. F.↗

Radiance profile enhancement for solar occultation measurements

It is pointed out that distortions in received signals in solar occultation measurements made from space derive from the systematic motion of the electrooptical sensor. In a wide range of cases, the motion-related signal distortions brought about by the instrument's full modulation transfer function are as important as those from the optics. It is shown through simulation that existing techniques in the field of digital-image processing can be applied directly to solar occultation experiments to correct for these distortions. The resulting enhanced radiation profile is found to be much closer to the true radiance profile than is the sampled output of the instrument.

Gomberg, R. I.↗

U.S. manned space flight: The first twenty years - A biomedical status report

In the last 20 years, the biomedical problems facing man in space have been brought into sharper focus. Space motion sickness is presently the most serious problem. Its etiology remains obscure, but the 'sensory conflict' theory appears most plausible. No valid predictive tests of susceptibility exist and presently medication for prevention or mitigation of symptoms must be relied on. Adaptation/biofeedback techniques may prove useful. Cardiovascular 'deconditioning' may be effectively attenuated by use of anti-g suits or plasma expanding techniques. Recent bedrest simulation studies would seem to indicate that concerns about chronically elevated central venous pressure during space flight are unfounded. The loss of red cell mass in space flight appears to be self-limited, independent of mission duration, and not of clinical concern, based on recent Soviet experiences. And finally, clodronate, a new diphosphonate effective in preventing hypercalciuria and negative calcium balance in normal human bedrested subjects, may prove effective in preventing or lessening skeletal mineral loss in space.

Dietlein, L. F.↗

Solar wind sputtering effects in the atmospheres of Mars and Venus

It is found through an investigation, combining Monte Carlo simulations and analytical techniques, of the direct collisional interaction of an energetic particle flux with the neutral components of a planetary atmosphere, that solar wind sputtering could provide an important exospheric mass sink on both Mars and Venus under appropriate conditions. The computed rates of helium loss in the Venusian atmosphere and of carbon, nitrogen and oxygen in the Martian atmosphere imply that sputtering would have a significant effect on the noble gas budget of Venus and dominate the chemical and photochemical loss processes of Mars. Because of diffusive separation of lighter elements and isotopes, and because the gravitational binding energy is proportional to the mass, the erosion process preferentially removes the lighter components of the atmosphere. Solar wind sputtering could therefore compete with other erosion mechanisms in generating substantial fractionation effects.

Watson, C. C.↗

Statistics of Delta v magnitude for a trajectory correction maneuver containing deterministic and random components

A number of interplanetary missions now being planned involve placing deterministic maneuvers along the flight path to alter the trajectory. Lee and Boain (1973) examined the statistics of trajectory correction maneuver (TCM) magnitude with no deterministic ('bias') component. The Delta v vector magnitude statistics were generated for several values of random Delta v standard deviations using expansions in terms of infinite hypergeometric series. The present investigation uses a different technique (Monte Carlo simulation) to generate Delta v magnitude statistics for a wider selection of random Delta v standard deviations and also extends the analysis to the case of nonzero deterministic Delta v's. These Delta v magnitude statistics are plotted parametrically. The plots are useful in assisting the analyst in quickly answering questions about the statistics of Delta v magnitude for single TCM's consisting of both a deterministic and a random component. The plots provide quick insight into the nature of the Delta v magnitude distribution for the TCM.

Bollman, W. E.↗

Manufacturing in space: Fluid dynamics numerical analysis

Thermocapillary convection in an air-jet Marangoni flow suppressing technique was numerically simulated for flow under various conditions of fluid properties, gravity, and temperature gradient. Results presented include computer generated plots of streamlines, velocities, and temperatures throughout the contained fluid flow, and plots of Marangoni flow velocities over the free surface.

Robertson, S. J.↗

Overview of TM Applications Research Reports

Applications-oriented users of TM data have every reason to be excited about the possibility of opening up other horizons using TM data. The data appear to be of excellent quality, and the investigations conducted to date, although preliminary, substantiate the findings of earlier research conducted with simulated TM data. Techniques used for sensor/data quality evaluation; data processing, analysis, and display; and comparisons of TM versus MSS data are summarized.

Williams, D. L.↗

Selected topics in experimental aeroelasticity at the NASA Langley Research Center

The results of selected studies that have been conducted by the NASA Langley Research Center in the last three years are presented. The topics presented focus primarily on the ever-important transonic flight regime and include the following: body-freedom flutter of a forward-swept-wing configuration with and without relaxed static stability; instabilities associated with a new tilt-rotor vehicle; effects of winglets, supercritical airfoils, and spanwise curvature on wing flutter; wind-tunnel investigation of a flutter-like oscillation on a high-aspect-ratio flight research wing; results of wind-tunnel demonstration of the NASA decoupler pylon concept for passive suppression of wing/store flutter; and, new flutter testing methods which include testing at cryogenic temperatures for full scale Reynolds number simulation, subcritical response techniques for predicting onset of flutter, and a two-degree-of-freedom mount system for testing side-wall-mounted models.

Ricketts, R. H.↗

The zonally averaged transport characteristics of the atmosphere as determined by a general circulation model

Two dimensional modeling has become an established technique for the simulation of the global structure of trace constituents. Such models are simpler to formulate and cheaper to operate than three dimensional general circulation models, while avoiding some of the gross simplifications of one dimensional models. Nevertheless, the parameterization of eddy fluxes required in a 2-D model is not a trivial problem. This fact has apparently led some to interpret the shortcomings of existing 2-D models as indicating that the parameterization procedure is wrong in principle. There are grounds to believe that these shortcomings result primarily from incorrect implementations of the predictions of eddy transport theory and that a properly based parameterization may provide a good basis for atmospheric modeling. The existence of these GCM-derived coefficients affords an unprecedented opportunity to test the validity of the flux-gradient parameterization. To this end, a zonally averaged (2-D) model was developed, using these coefficients in the transport parameterization. Results from this model for a number of contrived tracer experiments were compared with the parent GCM. The generally good agreement substantially validates the flus-gradient parameterization, and thus the basic principle of 2-D modeling.

Plumb, R. A.↗

Instability in Rotating Machinery

The proceedings contain 45 papers on a wide range of subjects including flow generated instabilities in fluid flow machines, cracked shaft detection, case histories of instability phenomena in compressors, turbines, and pumps, vibration control in turbomachinery (including antiswirl techniques), and the simulation and estimation of destabilizing forces in rotating machines. The symposium was held to serve as an update on the understanding and control of rotating machinery instability problems.

Source record↗

Selected topics in experimental aeroelasticity at the NASA Langley Research Center

The results of selected studies that have been conducted by the NASA Langley Research Center in the last three years are presented. The topics presented focus primarily on the ever-important transonic flight regime and include the following: body-freedom flutter of a forward-swept-wing configuration with and without relaxed static stability; instabilities associated with a new tilt-rotor vehicle; effects of winglets, supercritical airfoils, and spanwise curvature on wing flutter; wind-tunnel investigation of a flutter-like oscillation on a high-aspect-ratio flight research wing; results of wing-tunnel demonstration of the NASA decoupler pylon concept for passive suppression of wing/store flutter; and, new flutter testing methods which include testing at cryogenic temperatures for full scale Reynolds number simulation, subcritical response techniques for predicting onset of flutter, and a two-degree-of-freedom mount system for testing side-wall-mounted models.

Ricketts, R. H.↗

Learned pattern recognition using synthetic-discriminant-functions

A method of using synthetic-discriminant-functions to facilitate learning in a pattern recognition system is discussed. Learning is accomplished by continually adding images to the training set used for synthetic discriminant functions (SDF) construction. Object identification is performed by efficiently searching a library of SDF filters for the maximum optical correlation. Two library structures are discussed - binary tree and multilinked graph - along with maximum ascent, back-tracking, perturbation, and simulated annealing searching techniques. By incorporating the distortion invariant properties of SDFs within a library structure, a robust pattern recognition system can be produced.

Jared, David A.↗