Search NASA⌕ Search

SEARCH · Search NASA

Results for “Speed Control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Synthesis of mesoscale, crumpled, reduced graphene oxide roses by water-in-oil emulsion approach

Mesoscale crumpled graphene oxide roses (GO roses) were synthesized by using colloidal graphene oxide (GO) variants as precursors for a hybrid emulsification-rapid evaporation approach. This process produced rose-like, spherical, reduced mesostructures of colloidal GO sheets, with corrugated surfaces and particle sizes tunable in the range of ~800 nm to 15 μm. Excellent reproducibility for particle size distribution is shown for each selected speed of homogenizer rotor among different sample batches. The morphology and chemical structure of these produced GO roses was investigated using electron microscopy and spectroscopy techniques. In conclusion, the proposed synthesis route provides control over particle size, morphology and chemical properties of the synthesized GO roses.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nonuniversal behavior of cold Fermi condensates with narrow Feshbach resonances

In this paper, we construct an effective field theory for a condensate of cold Fermi atoms whose scattering is controlled by a narrow Feshbach resonance. We show how, from first principles, it permits a hydrodynamic description of the BEC-BCS crossover from which the equation of state, intimately related to the speed of sound, can be derived. Specifically, we stress the nonuniversal behavior of the equation of state at the unitary limit of infinite scattering length that arises when either, or both, of the range of the interatomic force and the scale of the molecular field become large.

74 ATOMIC AND MOLECULAR PHYSICS↗

Electric-field guiding of magnetic skyrmions

We theoretically study equilibrium and dynamic properties of nanosized magnetic skyrmions in thin magnetic films with broken inversion symmetry, where an electric field couples to magnetization via spin-orbit coupling. Based on a symmetry-based phenomenology and micromagnetic simulations we show that this electric-field coupling, via renormalizing the micromagnetic energy, modifies the equilibrium properties of the skyrmion. This change, in turn, results in a significant alteration of the current-induced skyrmion motion. Particularly, the speed and direction of the skyrmion can be manipulated by designing a desired energy landscape electrically, which we describe within Thiele's analytical model and demonstrate in micromagnetic simulations including electric-field-controlled magnetic anisotropy. We additionally use this electric-field control to construct gates for controlling skyrmion motion exhibiting a transistorlike and multiplexerlike function. Furthermore, the proposed electric-field effect can thus provide a low-energy electrical knob to extend the reach of information processing with skyrmions.

36 MATERIALS SCIENCE↗

Terahertz metamaterials

In this paper we present our recent developments in terahertz (THz) metamaterials and devices. Planar THz metamaterials and their complementary structures fabricated on suitable substrates have shown electric resonant response, which causes the band-pass or band-stop property in THz transmission and reflection. The operational frequency can be further tuned up to 20% upon photoexcitation of an integrated semiconductor region in the splitring resonators as the metamaterial elements. On the other hand, the use of semiconductors as metamaterial substrates enables dynamical control of metamaterial resonances through photoexcitation, and reducing the substrate carrier lifetime further enables an ultrafast switching recovery. The metamaterial resonances can also be actively controlled by application of a voltage bias when they are fabricated on semiconductor substrates with appropriate doping concentration and thickness. Using this electrically driven approach, THz modulation depth up to 80% and modulation speed of 2 MHz at room temperature have been demonstrated, which suggests practical THz applications.

36 MATERIALS SCIENCE↗

Analysis of the Switching Characteristics of MRAM Cells Based on Materials with Uniaxial Anisotropy

Magnetoresistive random access memory (MRAM) has some advantages over other types of memory. However, MRAM has one substantial drawback: the current density and magnetic field that must be applied to switch the spin-valve free layer inside an MRAM cell are too high. The dependence of the current density and switching magnetic field on the magnetic parameters of the material from which the ferromagnetic layers of a spin valve are fabricated is therefore analyzed. A comparison of the critical characteristics of a spin valve with longitudinal anisotropy shows that cobalt, iron, and alloys of them; cobalt ferroborates; and alloys of cobalt with gadolinium, are promising materials for fabricating spin valves. Bifurcation diagrams of equations that describe the valve switching process are presented and analyzed. The four optimum switching modes of a valve are selected, based on an investigation of the dynamics of the magnetization vector. The magnitudes of the external magnetic field and controlling injection current that correspond to stable MRAM cell switching are compared for a variety of materials. The switching time of an MRAM cell is estimated numerically, and the conditions for its optimum speed are determined. It is established that the most promising materials for spin-valve fabrication are Fe{sub 40}Co{sub 40}B{sub 20} and Co{sub 80}Gd{sub 20}, annealed at 300 and 200°C, respectively.

36 MATERIALS SCIENCE↗

Low loss fiber-coupled volumetric interconnects fabricated via direct laser writing

Photonic integrated circuits (PICs) are vital for high-speed data transmission. However, optical routing is limited in PICs composed of only one or a few stacked planes. Further, coupling losses must be low in deployed systems. Previously, we developed the subsurface controllable refractive index via beam exposure (SCRIBE) technique to write accurate 3D gradient refractive index (GRIN) profiles within a mesoporous silica scaffold. Here, we apply SCRIBE to fabricate low loss, broadband, polarization insensitive, fiber-coupled, single-mode volumetric interconnects that include waveguides traversing arbitrary 3D paths. By seamlessly integrating mode-matching subsurface lenses and GRIN waveguide tapers, calibrating for positional writing errors, implementing multipass exposure, automating alignment, and switching to antireflection coated fibers, we reduced the insertion loss for a fiber-PIC-fiber interconnect from 50 to 2.14 dB, or 1.47 dB, excluding the fiber array’s loss. Further, we establish an upper bound of 0.45 dB loss per coupler. We report quality factors of 27,000 and 77,000 and bending losses of 6 and 3 dB/cm for 15 and 30 µm radii microrings, respectively. We also demonstrate Bézier escalators, polarization-rotating and polarization-splitting interconnects, and a seven-channel 25 µm pitch volumetric interconnect. The SCRIBE platform presents a clear path toward realizing 3D PICs with unique functionality.

Optics↗

DOE Hybrid and Electric Vehicle Test Platform

Based on the contract NT-42790 to the Department of Energy, “Plug-in Hybrid Ethanol Research Platform”, Advanced Vehicle Research Center (AVRC) Virginia has successfully developed the phase I electric drive train research platform which has been named as Laboratory Rapid Application Testbed (LabRAT). In phase II, LabRAT is to be upgraded into plug-in hybrid research platform, which will be capable of testing power systems for electric vehicles, and plug-in hybrid electric vehicles running on conventional as well as alternative fuels. LabRAT is configured as a rolling testbed with plentiful space for installing various component configurations. Component connections are modularized for flexibility and are easily replaced for testing various mechanisms. LabRAT is designed and built as a full functional vehicle chassis with a steering system, brake system and four wheel suspension. The rear drive axle offers maximum flexibility with a quickly changeable gear ratio final drive to accommodate different motor speed requirements. The electric drive system includes an electric motor which is mechanically connected to the rear axle through an integrated speed/torque sensor. Initially, a 100 kW UQM motor and corresponding UQM motor controller is used which can be easily replaced with another motor/controller combination. A lithium iron phosphate (LiFePO4) battery pack is installed, which consists of 108 cells of 100 AH capacity, giving the total energy capacity of 32.5 kWh. Correspondingly, a fully functional battery management system (BMS) is installed to perform battery cell operation monitoring, cell voltage balancing, and reporting battery real time operating parameters to vehicle controller. An advanced vehicle controller ECU is installed for controlling the drive train. The vehicle controller ECU receives traction or braking torque command from driver through accelerator and brake pedal position sensors and battery operating signals from the BMS through CAN BUS, and then generates motor torque command (traction or braking) to the motor controller based on the control algorithm software embedded in the vehicle controller ECU. The vehicle controller ECU is a re-programmable electronic control unit. Any control algorithm software developed can be easily downloaded to vehicle controller ECU to test any newly developed control strategy. The flexibility of the control system significantly enhances the practical applicability of the LabRAT. A new test methodology has been developed for the LabRAT simulating any vehicles running on road with different weights from compact passenger car to light duty truck on an AC or eddy current dynamometers without much effort for modification of the system. LabRAT is equipped with a fully functional data acquisition system supplied by CyberMetrix. The measurement points along the drive train are DC electric power between battery pack and motor controller input, AC electric power between motor controller and electric motor, mechanical power between motor and rear axle. The data acquisition system is designed with more capability than current requirements in order to meet the requirements for phase II.

33 ADVANCED PROPULSION SYSTEMS↗

Low Voltage Electron Beam Processing Final Report CRADA No. TC-645-93-A

This CRADA project was established to develop a small, inexpensive sealed-tube electron beam processing system having immediate applications in industrial, high speed manufacturing processes, and in the Department of Energy (DOE) waste treatment/cleanup operations. The technical work involved the development and demonstration of a compact, sealed, 50-75 kilovolt (kV) EB generator prototype, including controls and power supply. The specific goals of this project were to develop a low cost vacuum tube capable of shooting an electron beam several inches into the air, and to demonstrate that wide area materials processing is feasible by stacking the tubes to produce continuous beams. During the project, we successfully demonstrated the producibility of a low cost electron beam system and several material processing operations of interest to US industry, DOE and, since September 11, 2001, the Homeland Security.

36 MATERIALS SCIENCE↗

Neighborhood Keeper

Neighborhood Keeper is a collective defense and community-wide visibility solution that provides a more effective industrial cyber defense by sharing threat intelligence at machine-speed across industries and geographic regions.

99 GENERAL AND MISCELLANEOUS↗

Walker Branch Watershed: Daily Climate and Soil Temperature Data

This data set reports daily climate and soil temperature data for Walker Branch Watershed. As part of the long-term Walker Branch project, daily climate and soil temperature data were collected using instruments on a meteorological tower located in an upper slope of the watershed. This data set contains one data file of daily climate and soil temperature data from 1993 through 2010. Measurement collection began in 1993 as part of the Throughfall Displacement Experiment (TDE) in the control (ambient) plot. Measurements include daily integrated values for above canopy incident photosynthetically active radiation, above canopy incident total radiation, air temperature, relative humidity, rainfall, soil temperature at 10-15 cm, and wind speed. Measurements of incoming rainfall, irradiance, and photosynthetic photon flux density were obtained in a nearby clearing until 1998 when above canopy observations were added to the ambient plot tower. The Walker Branch Watershed is located on the U.S. Department of Energy's Oak Ridge Reservation in eastern Tennessee.

54 ENVIRONMENTAL SCIENCES↗

Ocean Surface Flux Algorithm Effects on Earth System Model Energy and Water Cycles

Earth system models parameterize ocean surface fluxes of heat, moisture, and momentum with empirical bulk flux algorithms, which introduce biases and uncertainties into simulations. We investigate the atmosphere and ocean model sensitivity to algorithm choice in the Energy Exascale Earth System Model (E3SM). Flux differences between algorithms are larger in atmosphere simulations (where wind speeds can vary) than ocean simulations (where wind speeds are fixed by forcing data). Surface flux changes lead to global scale changes in the energy and water cycles, notably including ocean heat uptake and global mean precipitation rates. Compared to the control algorithm, both COARE and University of Arizona (UA) algorithms reduce global mean precipitation and top of atmosphere radiative biases. Further, UA may slightly reduce biases in ocean meridional heat transport. We speculate that changes seen here, especially in the ocean, could be even larger in coupled simulations.

54 ENVIRONMENTAL SCIENCES↗

Intra-binary shock heating of black widow companions

The low-mass companions of evaporating binary pulsars (black widows and similar) are strongly heated on the side facing the pulsar. However, in high-quality photometric and spectroscopic data, the heating pattern does not match that expected for direct pulsar illumination. Here we explore a model where the pulsar power is intercepted by an intra-binary shock (IBS) before heating the low-mass companion. We develop a simple analytic model and implement it in the popular “ICARUS” light curve code. The model is parameterized by the wind momentum ratio β and the companion wind speed f{sub v}v{sub orb}, and assumes that the reprocessed pulsar wind emits prompt particles or radiation to heat the companion surface. We illustrate an interesting range of light curve asymmetries controlled by these parameters. The code also computes the IBS synchrotron emission pattern, and thus can model black widow X-ray light curves. As a test, we apply the results to the high-quality asymmetric optical light curves of PSR J2215+5135; the resulting fit gives a substantial improvement upon direct heating models and produces an X-ray light curve consistent with that seen. The IBS model parameters imply that at the present loss rate, the companion evaporation has a characteristic timescale of τ{sub evap}≈150 Myr. Still, the model is not fully satisfactory, indicating that there are additional unmodeled physical effects.

79 ASTRONOMY AND ASTROPHYSICS↗

A Modeling Framework for Connectivity and Automation Co-simulation

This paper presents a unified modeling environment to simulate vehicle driving and powertrain operations within the context of the surrounding environment, including interactions between vehicles and between vehicles and the road. The goal of this framework is to facilitate the analysis of the energy impacts of vehicle connectivity and automation, as well as the development of eco-driving algorithms. Connectivity and automation indeed provide the potential to use information about the environment and future driving to minimize energy consumption. To achieve this goal, the designers of eco-driving control strategies need to simulate a wide range of driving situations, including the interactions with other vehicles and the infrastructure in a closed-loop fashion. The framework, called RoadRunner, extends the capability of Autonomie, a vehicle energy consumption and performance modeling platform, to simulate the longitudinal movements of one or more user-defined vehicles along a user-defined route. In the first part of the paper, we provide an overview of how the framework is organized. The route attributes (position of traffic lights, grade, etc.) can be automatically extracted from a digital map after origin and destination are provided. The user defines which vehicle models to simulate and in which order. The Simulink model is then automatically generated from the scenario description. In the second part of the paper, we present an example case of a scenario with an eco-approach, using traffic signals that provide their signal phase and timing information to the vehicle. A two-stage control algorithm inspired by the literature is implemented to adjust the vehicle’s velocity while traveling through a signalized corridor with the goal of minimizing fuel consumption. Finally, we present simulation results for speed patterns and powertrain operations in typical roads with multiple intersection, comparing the energy savings with traditional driving of unconnected vehicles.

Kim, Namdoo↗

PERFORMANCE OF RC AND FRC WALL PANELS REINFORCED WITH MILD STEEL AND GFRP COMPOSITES IN BLAST EVENTS

The structural integrity of reinforced concrete structures in blast events is important for critical facilities. This paper presents experimental data generated for calibrating detailed finite element models that predict the performance of reinforced concrete wall panels with a wide range of construction details under blast loading. The test specimens were 1.2 m square wall panels constructed using Normal Weight Concrete (NWC) or Fiber Reinforced Concrete (FRC). FRC consists of macro-synthetic fibers dispersed in NWC. Five types of panels were tested: NWC panels with steel bar reinforcement (Type A); FRC panels without additional reinforcement (Type B); FRC panels with steel bar reinforcement (Type C); NWC panels with glass fiber reinforced polymer (GFRP) bar reinforcement (Type D); and NWC panels reinforced with steel bar reinforcement and external bidirectional GFRP overlays on both faces (Type E). An additional three Type C panels were used as control specimens (CON). Each panel type was constructed with three thicknesses: 152 mm, 254 mm, and 356 mm. The panels were instrumented with strain gauges, and accelerometers; in addition, pressure sensors and high speed videos were employed during the blast events. Panel types C and E had the best performance, whereas panel type B did not perform well. Preliminary dynamic simulations show crack patterns similar to the experimental results.

36 MATERIALS SCIENCE↗

Relative Humidity Controls Ammonia Loss from Urea Applied to Loblolly Pine

In the United States of America, approximately 600,000 ha of southern pine are fertilized with urea each year, with NH3 volatilization losses ranging from <1% to >50% depending on environmental conditions. Previous work showed that timing of rainfall after urea application plays a significant role in controlling NH3 loss, but the effect of other environmental variables is not well understood. We conducted ten 29-d studies under different environmental conditions during two years to identify important variables controlling NH3 loss from urea applied to loblolly pine (Pinus taeda L.) at 200 kg N ha-1. Ammonia loss was measured with dynamic chambers that adjusted the rate of air flow through the system based on wind speed at 1 cm above the soil surface. Regression analysis indicated that a variable related to initial water content of the forest floor and a variable related to relative humidity (RH) during the study explained 85 to 94% of the observed variability in NH3 loss. Relatively high initial water content followed by consistently high RH led to large NH3 losses. In contrast, low initial water contents resulted in slow rates of NH3 loss, which increased when elevated RH led to an increase in the water content of the forest floor. These results indicate that RH can play a significant role in NH3 loss by accelerating urea dissolution and by increasing or decreasing the water content of the forest floor, which in turn can affect the rate of urea hydrolysis.

54 ENVIRONMENTAL SCIENCES↗

Use of Adaptive Injection Strategies to Increase the Full Load Limit of RCCI Operation

Dual-fuel combustion using port-injection of low reactivity fuel combined with direct injection (DI) of a higher reactivity fuel, otherwise known as reactivity controlled compression ignition (RCCI), has been shown as a method to achieve low-temperature combustion with moderate peak pressure rise rates, low engine-out soot and NO x emissions, and high indicated thermal efficiency. A key requirement for extending to high-load operation is moderating the reactivity of the premixed charge prior to the diesel injection. One way to accomplish this is to use a very low reactivity fuel such as natural gas. In this work, experimental testing was conducted on a 13 l multicylinder heavy-duty diesel engine modified to operate using RCCI combustion with port injection of natural gas and DI of diesel fuel. Engine testing was conducted at an engine speed of 1200 rpm over a wide variety of loads and injection conditions. The impact on dual-fuel engine performance and emissions with respect to varying the fuel injection parameters is quantified within this study. The injection strategies used in the work were found to affect the combustion process in similar ways to both conventional diesel combustion (CDC) and RCCI combustion for phasing control and emissions performance. As the load is increased, the port fuel injection (PFI) quantity was reduced to keep peak cylinder pressure (PCP) and maximum pressure rise rate (MPRR) under the imposed limits. Overall, the peak load using the new injection strategy was shown to reach 22 bar brake mean effective pressure (BMEP) with a peak brake thermal efficiency (BTE) of 47.6%.

Hanson, Reed↗

The combined dynamics of swirler and turbulent premixed swirling flames

The dynamics of premixed confined swirling flames is investigated by examining their response to incident velocity perturbations. A generalized transfer function designated as the flame describing function (FDF) is determined by sweeping a frequency range extending from 0 to 400 Hz and by changing the root mean square fluctuation level between 0% and 72% of the bulk velocity. The unsteady heat release rate is deduced from the emission intensity of OH{sup *} radicals. This global information is complemented by phase conditioned Abel transformed emission images. This processing yields the distribution of light emission. By assuming that the light intensity is proportional to the heat release rate, it is possible to deduce the distribution of unsteady heat release rate in W m{sup -3} and see how it evolves with time during the modulation cycle and for different forcing frequencies. These data can be useful for the determination of regimes of instability but also give clues on the mechanisms which control the swirling flame dynamics. It is found from experiments and demonstrated analytically that a swirler submitted to axial acoustic waves originating from the upstream manifold generates a vorticity wave on its downstream side. The flame is then submitted to a transmitted axial acoustic perturbation which propagates at the speed of sound and to an azimuthal velocity perturbation which is convected at the flow velocity. The net result is that the dynamical response and unsteady heat release rate are determined by the combined effects of these axial and induced azimuthal velocity perturbations. The former disturbance induces a shedding of vortices from the injector lip which roll-up the flame extremity while the latter effectively perturbs the swirl number which results in an angular oscillation of the flame root. This motion is equivalent to that which would be induced by perturbations of the burning velocity. The phase between incident perturbations is controlled by the convective time delay between the swirler and the injector. The constructive or destructive interference between the different perturbations is shown to yield the low and high gains observed for certain frequencies. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Detonation Wave Dynamics in a Rotating Detonation Engine

Rotating detonation engines have complex unsteady flow fields that have been observed to give rise to multiple wave systems beyond the main detonation wave they are intended to produce. In this work we have developed a new analysis technique we refer to Circuit Wave Analysis to identify and describe the system of waves associated with the reaction fronts that exist in the RDE from time-resolved, high-speed end-view chemiluminescence movies of the reaction fronts. For each wave system, we then extract the speed of the wave, its direction and strength (from a measure of spectral power). Through this approach we have determined that under a range of operating conditions RDE flow fields are characterized by three separate wave systems: the main detonation wave and two secondary wave systems, which, based on their relationship relative to the main detonation wave, we refer to as the counter rotating fast wave and counter rotating slow wave pair, respectively. The properties of all three waves vary with both operation condition (air mass flow rate and equivalence ratio) and the configuration of the air inlet and fuel injector. The controlling mechanisms behind the secondary wave systems are not currently known. However, the impact that secondary waves have on some of the detonation properties can be observed in select cases. For example, the presence of a secondary wave has been observed to correspond with a reduction in detonation wave speed.

Chacon, Fabian↗