Search NASA⌕ Search

SEARCH · Search NASA

Results for “TIME DEPENDENCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Time-dependent runaway electron simulations: Ampere–Faraday equations implemented in CQL3D

The runaway electron (RE) distributions driven by a large toroidal electric field induced by the drop in the temperature profile due to disruption or pellets are comprehensively simulated by the 3D Fokker–Planck (FP) solver CQL3D (Harvey and McCoy 1992 Proc. of IAEA TCM ), recently coupled to the Ampere–Faraday (AF) equations. The evolution of the toroidal current in a plasma occurs on a resistive time scale, τ res = 4 πa 2 /( c 2 η ), which is typically of the order of seconds in present tokamaks. Here, a and η are respectively plasma radius or radial extent of a current density perturbation, and Ohmic resistivity. From the Faraday EM equation, the toroidal electric field is proportional to the time derivative of the poloidal magnetic field, which, from the Ampere equation, is proportional to the toroidal current. Thus, the toroidal electric field rapidly increases due to an abrupt temperature drop decrease in conductivity, to prevent change in the toroidal current faster than τ res . This is a example of Lenz's law. For example, in simulations with KPRAD (Whyte et al 2003 J. Nucl. Mater . 313–6 1239) of neon pellet injection into a DIII-D shot, T e drops from 2 keV to 10 eV in 0.1 ms and Z eff increases 1–4, giving that the electric field increases 3500× to 0.8 V cm -1 . As described in Harvey et al (2000 PoP 7 4590), this places much of the tail electron distribution beyond the Dreicer runaway velocity, giving so-called 'hot-tail runaways' which for a time are the dominant source of runaways, more so than the knockon source. In this prior calculation, performed for a single flux surface, the toroidal current density is held constant, on the basis that τ res is large. Most of the initial current can be converted to runaway current, which is then dangerous, particularly for ITER. A more comprehensive A–F model recently implemented in CQL3D, taking into account the time-development of the full-plasma-width toroidal electric field on time-scales of order τ res applies an iterative technique for the toroidal field previously developed for a different application (Kupfer et al 1996 PoP 3 3644), maintaining the implicit-in-time evolution of CQL3D. The degree of runaway current formation is reduced in AF augmented CQL3D, but the basic mechanism of 'hot-tail runaways' remains a dominant contribution to the REs at early times after the T e drop in these simulations. On the other hand, a NIMROD (Sovinec et al 2004 J. Comput. Phys. 195 355 ) simulation of shattered-pellet shutdown of DIII-D plasma (Kim 2018 APS/DPP Meeting), gives a slower thermal quench; when the plasma profiles and electric field are coupled one-way to CQL3D, the 'hot-tail' REs are much less, and growth of RE is dominated by the knockon process.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Solving time-dependent two-dimensional eddy current problems

Results of transient eddy current calculations are reported. For simplicity, a two-dimensional transverse magnetic field which is incident on an infinitely long conductor is considered. The conductor is assumed to be a good but not perfect conductor. The resulting problem is an interface initial boundary value problem with the boundary of the conductor being the interface. A finite difference method is used to march the solution explicitly in time. The method is shown. Treatment of appropriate radiation conditions is given special consideration. Results are validated with approximate analytic solutions. Two stringent test cases of high and low frequency incident waves are considered to validate the results.

Lee, Min Eig↗

A time dependent model of the Jovian current sheet

Analysis of vector helium magnetometer measurements during the Pioneer 10 outbound pass through the Jovian magnetosphere reveals that the average location of the near-equatorial current sheet is a surface whose shape is determined by the velocity at which the magnetic perturbations produced by a rotating tilted dipole propagate to large radial distances. A model is presented which is a surface encircling the planet and rotating rigidly with it. Based on a linear fit to the times of the current sheet crossings, a formula is derived for the surface representing the average position of the near-equatorial current sheet in the Jovian magnetosphere.

Kivelson, M. G.↗

Stability of time dependent and spatially varying flows; Proceedings of the Symposium, Hampton, VA, Aug. 19-23, 1985

Papers are presented on the application of stability theory to laminar flow control, secondary instabilities in boundary layers, a Floquet analysis of secondary instability in shear flows, and the generation of Tollmien-Schlichting waves by long wavelength free stream disturbances. Also considered are numerical experiments on boundary-layer receptivity, short-scale inviscid instabilities in the flow past surface-mounted obstacles, wave phenomena in a high Reynolds number compressible boundary layer, and instability of time-periodic flows. Other topics include high frequency Rayleigh instability of Stokes layers, stability and resonance in grooved-channel flows, finite length Taylor Couette flow, and vortical structures in the breakdown stage of transition.

Dwoyer, Douglas L.↗

Time-dependent boundary conditions for hyperbolic systems. II

A general boundary condition formalism is developed for all types of boundary conditions to which hyperbolic systems are subject; the formalism makes possible a 'cookbook' approach to boundary conditions, by means of which novel boundary 'recipes' may be derived and previously devised ones may be consulted as required. Numerous useful conditions are derived for such CFD problems as subsonic and supersonic inflows and outflows, nonreflecting boundaries, force-free boundaries, constant pressure boundaries, and constant mass flux. Attention is given to the computation and integration of time derivatives.

Thompson, Kevin W.↗

Three-dimensional time dependent computation of turbulent flow

The three-dimensional, primitive equations of motion are solved numerically for the case of isotropic box turbulence and the distortion of homogeneous turbulence by irrotational plane strain at large Reynolds numbers. A Gaussian filter is applied to governing equations to define the large scale field. This gives rise to additional second order computed scale stresses (Leonard stresses). The residual stresses are simulated through an eddy viscosity. Uniform grids are used, with a fourth order differencing scheme in space and a second order Adams-Bashforth predictor for explicit time stepping. The results are compared to the experiments and statistical information extracted from the computer generated data.

Kwak, D.↗

Vertical, meridional, seasonal, and local time dependence of non-LTE effects in stratospheric NO and implications for infrared remote sensing

Calculations have been carried out on possible nonlocal thermodynamic equilibrium (non-LTE) effects previously suggested for stratospheric nitric oxide (NO) associated with the direct photochemical production of vibrationally excited NO by the processes NO2 + hv yields NO(v) + O and O + NO2 yields NO(v) + O2. The calculations, which make use of improved calculations of the NO vibrational state distribution from NO2 photolysis, are carried out as a function of altitude and latitude for a variety of seasons and local times. Non-LTE effects on the order of 30 percent for v = 1 are obtained, maximizing in the middle stratosphere over the equator. The results of the calculations suggest that incorporation of the non-LTE effect into the retrieval algorithm for NO from infrared thermal emission measuring instruments on the Upper Atmosphere Research Satellite will need to be done carefully if correct distributions and variations of NO with altitude, latitude, season, and local time are to be obtained.

Kaye, Jack A.↗

A self-consistent model for the particles and fields upstream of an outgassing comet. II - A time-dependent description

In a previous paper, the global variation of the magnetic field and solar wind flow parameters in the unshocked region upstream of an outgassing comet was determined using a kinetic treatment for the cometary ions. Two different assumptions were made concerning the cometary ion distribution function: the pickup cometary ions formed either a velocity space gyrotropic ring distribution or a velocity space isotropic shell distribution in the solar wind frame of reference. In the present paper the general case is considered wherein the newly picked up ions are elastically pitch angle scattered from the initial ring distribution to a shell with some characteristic time scale. Using theoretically determined parameters which reflect the conditions expected at Comet Kopff (a typical short-period comet and a possible target for the CRAF/Cassini mission) for various heliocentric distances, how the pitch angle scattering rate affects the global morphology is determined.

Flammer, K.↗

Time-Dependent CO[subscript 2] Sorption Hysteresis in a One-Dimensional Microporous Octahedral Molecular Sieve

The development of sorbents for next-generation CO{sub 2} mitigation technologies will require better understanding of CO{sub 2}/sorbent interactions. Among the sorbents under consideration are shape-selective microporous molecular sieves with hierarchical pore morphologies of reduced dimensionality. We have characterized the non-equilibrium CO{sub 2} sorption of OMS-2, a well-known one-dimensional microporous octahedral molecular sieve with manganese oxide framework. Remarkably, we find that the degree of CO{sub 2} sorption hysteresis increases when the gas/sorbent system is allowed to equilibrate for longer times at each pressure step. Density functional theory calculations indicate a 'gate-keeping' role of the cation in the tunnel, only allowing CO{sub 2} molecules to enter fully into the tunnel via a highly unstable transient state when CO{sub 2} loadings exceed 0.75 mmol/g. The energy barrier associated with the gate-keeping effect suggests an adsorption mechanism in which kinetic trapping of CO{sub 2} is responsible for the observed hysteretic behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding Time Dependence on Zinc Metal-Organic Framework Growth Using In Situ Liquid Secondary Ion Mass Spectrometry

The abundance of novel metal-organic framework (MOF) materials continues to increase as more applications are discovered for these highly porous, well-ordered crystalline adsorbents. The simplicity of its constituents allows for the design of new MOFs with virtue of functionality and pore topology towards target adsorbates. However, the fundamental understanding of how these frameworks age during nucleation and growth is mostly limited to speculation from simulation studies. In this effort, we utilize the microfluidic interface of liquid and vacuum in a unique SALVI device to analyze the formation and aging of the benchmark MOF-74 framework using time-of-flight secondary ion mass spectrometry (ToF-SIMS). Principal component analysis (PCA) of the SIMS mass spectra together with ex situ microscopy and porosimetry, provide new insights into the growth and aging process.

Sabale, Sandip R.↗

Time-dependent Calculations of an Impact-triggered Runaway Greenhouse Atmosphere on Mars

Large asteroid and comet impacts result in the production of thick (greater than tens of meters) global debris layers of 1500+ K and the release through precipitation of impact-injected steam and melting ground ice) of large amounts (greater than tens of meters global equivalent thickness) of water on the surface of Mars. Modeling shows that the surface of Mars is still above the freezing point of water after the rainout of the impact-injected steam and melting of subsurface ice. The energy remaining in the hot debris layer will allow evaporation of this water back into the atmosphere where it may rain out at a later time. Given a sufficiently rapid supply of this water to the atmosphere it will initiate a temporary "runaway" greenhouse state.

T L Segura↗

Time-Dependent Measure of a Nano-Scale Force-Pulse Driven by the Axonemal Dynein Motors in Individual Live Sperm Cells

Nano-scale mechanical forces generated by motor proteins are crucial to normal cellular and organismal functioning. The ability to measure and exploit such forces would be important to developing motile biomimetic nanodevices powered by biological motors for Nanomedicine. Axonemal dynein motors positioned inside the sperm flagellum drive microtubule sliding giving rise to rhythmic beating of the flagellum. This force-generating action makes it possible for the sperm cell to move through viscous media. Here we report new nano-scale information on how the propulsive force is generated by the sperm flagellum and how this force varies over time. Single cell recordings reveal discrete {approx}50 ms pulses oscillating with amplitude 9.8 {+-} 2.6 nN independent of pulse frequency (3.5-19.5 Hz). The average work carried out by each cell is 4.6 x 10{sup -16} J per pulse, equivalent to the hydrolysis of {approx}5,500 ATP molecules. The mechanochemical coupling at each active dynein head is {approx}2.2 pN/ATP, and {approx}3.9 pN per dynein arm, in agreement with previously published values obtained using different methods.

59 BASIC BIOLOGICAL SCIENCES↗

Time-dependent water dynamics in hydrated uranyl fluoride

In this study, uranyl fluoride is a three-layer, hexagonal structure with significant stacking disorder in the c-direction. It supports a range of unsolved ‘thermodynamic’ hydrates with 0–2.5 water molecules per uranium atom, and perhaps more. However, the relationship between water, hydrate crystal structures, and thermodynamic results, collectively representing the chemical pathway through these hydrate structures, has not been sufficiently elucidated. We used high-resolution quasielastic neutron scattering to study the dynamics of water in partially hydrated uranyl fluoride powder over the course of 4 weeks under closed conditions. The spectra are composed of two quasielastic components: one is associated with translational diffusive motion of water that is approximately five to six times slower than bulk water, and the other is a slow (on the order of 2–300 ps), spatially bounded water motion. The translational component represents water diffusing between the weakly bonded layers in the crystal, while the bounded component may represent water trapped in subnanometre ‘pockets’ formed by the space between uranium-centred polymerisation units. Complementary neutron diffraction measurements do not show any significant structural changes, suggesting that a chemical conversion of the material does not occur in the thermodynamically isolated system on this timescale.

36 MATERIALS SCIENCE↗

Time-Dependent Consolidation in Porous Geomaterials at In Situ Conditions of Temperature and Pressure

Analysis of quartz sandstones shows that grain-scale crushing (fracture and rearrangement) and associated sealing of fractures contribute significantly to consolidation. The crushing strength (P*) for granular material is defined by laboratory experiments conducted at strain rates of 10 -4 to 10 -5 s -1 and room temperature. Based on experiments, many sandstones would require burial depths in excess of the actual maximum burial depth to create observed microstructure and density. In this paper, we use experiments and soil mechanics principles to determine rate laws for brittle consolidation of fine-grained quartz sand to better estimate in situ failure conditions of porous geomaterials. Experiments were conducted on St. Peter sand utilizing different isostatic consolidation and creep load paths at temperatures to 200 °C and at strain rates of 10 -4 to 10 -10 s -1 . Experiment results are consistent with observed rate dependence of consolidation in soils, and P* for sand can be identified by the change in the dependence of consolidation rate with stress, allowing the extrapolation of P* determined in the laboratory to geologic rates and temperatures. Additionally, normalized P* values can be described by a polynomial function to quantify temperature, stress, and strain-rate relationships for the consolidation of porous geomaterials by subcritical cracking. At geologic loading rates, P* for fine-grained quartz sand is achieved within ~3-km burial depth, and thus, shear-enhanced compaction under nonisostatic stress can occur at even shallower depths. Finally, these results demonstrate that time and temperature effects must be considered for predicting the brittle consolidation of sediments in depositional basins, petroleum reservoirs, and engineering applications.

58 GEOSCIENCES↗

Time Dependence of Collision Probabilities During Satellite Conjunctions

The NASA Conjunction Assessment Risk Analysis (CARA) team has recently implemented updated software to calculate the probability of collision (P (sub c)) for Earth-orbiting satellites. The algorithm can employ complex dynamical models for orbital motion, and account for the effects of non-linear trajectories as well as both position and velocity uncertainties. This “3D P (sub c)” method entails computing a 3-dimensional numerical integral for each estimated probability. Our analysis indicates that the 3D method provides several new insights over the traditional “2D P (sub c)” method, even when approximating the orbital motion using the relatively simple Keplerian two-body dynamical model. First, the formulation provides the means to estimate variations in the time derivative of the collision probability, or the probability rate, R (sub c). For close-proximity satellites, such as those orbiting in formations or clusters, R (sub c) variations can show multiple peaks that repeat or blend with one another, providing insight into the ongoing temporal distribution of risk. For single, isolated conjunctions, R (sub c) analysis provides the means to identify and bound the times of peak collision risk. Additionally, analysis of multiple actual archived conjunctions demonstrates that the commonly used “2D P (sub c)” approximation can occasionally provide inaccurate estimates. These include cases in which the 2D method yields negligibly small probabilities (e.g., P (sub c)) is greater than 10 (sup -10)), but the 3D estimates are sufficiently large to prompt increased monitoring or collision mitigation (e.g., P (sub c) is greater than or equal to 10 (sup -5)). Finally, the archive analysis indicates that a relatively efficient calculation can be used to identify which conjunctions will have negligibly small probabilities. This small-P (sub c) screening test can significantly speed the overall risk analysis computation for large numbers of conjunctions.

Hall, Doyle T.↗

Developments in SRW Code and Sirepo Framework Supporting Simulation of Time-Dependent Coherent X-ray Scattering Experiments

Physical optics simulations for beamlines and experiments are essential for the effective use of synchrotron light source facilities such as NSLS-II at BNL. The SRW software package supports such source-to-detector simulations for coherent X-ray scattering and imaging experiments through its Python interface and Sirepo browser-based graphical user interface. This allows one to define custom sample models, assess the feasibility of an experiment, and estimate most appropriate beamline settings before using valuable beamtime. We discuss the recent use of general-purpose GPU resources and coherent mode decomposition algorithms in SRW to accelerate physical optics simulations with partially coherent X-rays. To illustrate these new capabilities, we describe simulations of typical time series of partially coherent scattering images used in X-ray Photon Correlation Spectroscopy (XPCS) experiments; aiming to characterize the nanoscale dynamics of a disordered sample, representing a solution of nanoparticles undergoing Brownian diffusion.

36 MATERIALS SCIENCE↗

A SEARCH FOR SPECTRAL HYSTERESIS AND ENERGY-DEPENDENT TIME LAGS FROM X-RAY AND TeV GAMMA-RAY OBSERVATIONS OF Mrk 421

Blazars are variable emitters across all wavelengths over a wide range of timescales, from months down to minutes. It is therefore essential to observe blazars simultaneously at different wavelengths, especially in the X-ray and gamma-ray bands, where the broadband spectral energy distributions usually peak. In this work, we report on three “target-of-opportunity” observations of Mrk 421, one of the brightest TeV blazars, triggered by a strong flaring event at TeV energies in 2014. These observations feature long, continuous, and simultaneous exposures with XMM-Newton (covering the X-ray and optical/ultraviolet bands) and VERITAS (covering the TeV gamma-ray band), along with contemporaneous observations from other gamma-ray facilities (MAGIC and Fermi -Large Area Telescope) and a number of radio and optical facilities. Although neither rapid flares nor significant X-ray/TeV correlation are detected, these observations reveal subtle changes in the X-ray spectrum of the source over the course of a few days. We search the simultaneous X-ray and TeV data for spectral hysteresis patterns and time delays, which could provide insight into the emission mechanisms and the source properties (e.g., the radius of the emitting region, the strength of the magnetic field, and related timescales). The observed broadband spectra are consistent with a one-zone synchrotron self-Compton model. We find that the power spectral density distribution at ≳4 × 10{sup −4} Hz from the X-ray data can be described by a power-law model with an index value between 1.2 and 1.8, and do not find evidence for a steepening of the power spectral index (often associated with a characteristic length scale) compared to the previously reported values at lower frequencies.

79 ASTRONOMY AND ASTROPHYSICS↗