Search NASA⌕ Search

SEARCH · Search NASA

Results for “Technology data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Rotary-wing aircraft systems for the short-haul market

This paper describes preliminary designs of tilt-rotor and tandem-rotor helicopter V/STOL aircraft for the 1958 short-haul market. These designs include a tilt-rotor aircraft designed for STOL-only operation. The baseline designs are presented with technological and cost data. The impact of noise and ride qualities on aircraft size and cost, and on passenger acceptance are discussed. The results of the study are compared against competitive alternatives in air transportation.

Magee, J. P.↗

Digital registration of ERTS-1 imagery

Two requirements for the registration of Earth Resources Technology Satellite (ERTS) data are discussed. These requirements are registration of ERTS data acquired on separate passes and registration of ERTS data to a ground reference. Performances of a semi-automatic warp algorithm and an automatic pipeline processing algorithm demonstrate that either procedure is useful, depending upon the user's requirements. In two cases where the time lapse between passes of the satellite were 90 days and 18 days the automatic pipeline processor reduced the mean radial registration error to 0.28 and 0.58 pixel, respectively. It is concluded that this technique is promissing for high-volume production processing.

Bonrud, L. O.↗

NASA crop calendars: Wheat, barley, oats, rye, sorghum, soybeans, corn

Crop calenders used to determine when Earth Resources Technology Satellite ERTS data would provide the most accurate wheat acreage information and to minimize the amount of ground verified information needed are presented. Since barley, oats, and rye are considered 'confusion crops, i.e., hard to differentiate from wheat in ERTS imagery, specific dates are estimated for these crops in the following stages of development: (1) seed-bed operation, (2) planting or seeding, (3) intermediate growth, (4) dormancy, (5) development of crop to full ground cover, (6) heading or tasseling, and flowering, (7) harvesting, and (8) posting-harvest operations. Dormancy dates are included for fall-snow crops. A synopsis is given of each states' growing conditions, special cropping practices, and other characteristics which are helpful in identifying crops from ERTS imagery.

Stuckey, M. R.↗

The deep space network

Progress is reported in flight project support, tracking and data acquisition, research technology, network engineering, hardware and software implementation, and operations.

Source record↗

The Atlanta tornado of 1975

Joint observations by radar and high-frequency sferics detectors at Georgia Institute of Technology provided unique data on the Atlanta tornado of Mar. 24, 1975. The classic hook echo was detected by radar at a range of about 26 km, 15 min before the tornado touched down. While the tornado was on the ground the sferics burst rate was very low, despite very high values recorded immediately before and after this interval. This observation, together with visual reports of a strong cloud-to-ground discharge at the time of tornado touchdown, suggests an interaction of the tornado with the electric field of the storm.

Greneker, E. F.↗

STARPAHC - Operational findings

Delivery of quality health care to passengers of extended-mission spacecraft and to remote populations on earth (a major national problem) requires extending the knowledge and skills of the physician many kilometers distant from his physical location. The STARPAHC telemedicine system accomplishes this by using physician's assistants complemented with space technology in communications, data handling, and systems engineering. It is presently in operation and undergoing a 2-year evaluation on the Papago Indian Reservation, Arizona. Results have established its feasibility as a solution for remote area health care on earth, while providing information useful to the planners of advanced manned spacecraft missions.

Belasco, N.↗

The ten-ecosystem study investigation plan

With the continental United States divided into ten forest and grassland ecosystems, the Ten Ecosystem Study (TES) is designed to investigate the feasibility and applicability of state-of-the-art automatic data processing remote sensing technology to inventory forest, grassland, and water resources by using Land Satellite data. The study will serve as a prelude to a possible future nationwide remote sensing application to inventory forest and rangeland renewable resources. This plan describes project design and phases, the ten ecosystem, data utilization and output, personnel organization, resource requirements, and schedules and milestones.

Kan, E. P.↗

Nuclear cardiograph and scintigraphy

Extensive advances in the technology of detectors, data analysis systems, and tracers used have resulted in greatly expanded applications of radioisotopes to the assessment of cardiac function and disease. The development of nuclear cardiology has proceeded along four lines: (1) radionuclide angiography, (2) myocardial perfusion imaging, (3) intracoronary microsphere imaging, and (4) regional myocardial blood flow determination using inert gases.

Mclaughlin, P.↗

Report on the lunar ranging at McDonald Observatory

Range measurements to an accuracy of 5 cm were achieved following improvements in the laser oscillator configuration and the photomultiplier system. Modifications to the laser include a redesigned pockel cell mount to eliminate stressing of the cell crystal; an improved electrically triggered spark gap for sharpening the electrical pulse; the use of a brewster plate in the cavity to eliminate pre-pulsing; improved alignment for the oscillator system; and increased cavity lifetime through thin film polarizer technology. Laser calibration data are presented along with the lunar laser operations log for June to October 1977.

Silverberg, E. C.↗

Image processing system performance prediction and product quality evaluation

The author has identified the following significant results. A new technique for image processing system performance prediction and product quality evaluation was developed. It was entirely objective, quantitative, and general, and should prove useful in system design and quality control. The technique and its application to determination of quality control procedures for the Earth Resources Technology Satellite NASA Data Processing Facility are described.

Stein, E. K.↗

Third Conference on Fibrous Composites in Flight Vehicle Design, part 1

The use of fibrous composite materials in the design of aircraft and space vehicle structures and their impact on future vehicle systems are discussed. The topics covered include: flight test work on composite components, design concepts and hardware, specialized applications, operational experience, certification and design criteria. Contributions to the design technology base include data concerning material properties, design procedures, environmental exposure effects, manufacturing procedures, and flight service reliability. By including composites as baseline design materials, significant payoffs are expected in terms of reduced structural weight fractions, longer structural life, reduced fuel consumption, reduced structural complexity, and reduced manufacturing cost.

Source record↗

Flight-measured buffet characteristics of a supercritical wing and a conventional wing on a variable-sweep airplane

Windup-turn maneuvers were performed to assess the buffet characteristics of the F-111A aircraft and the same aircraft with a supercritical wing, which is referred to as the F-111 transonic aircraft technology (TACT) aircraft. Data were gathered at wing sweep angles of 26, 35, and 58 deg for Mach numbers from 0.60 to 0.95. Wingtip accelerometer data were the primary source of buffet information. The analysis was supported by wing strain-gage and pressure data taken in flight, and by oil-flow photographs taken during tests of a wind tunnel model. In the transonic speed range, the overall buffet characteristics of the aircraft having a supercritical wing are significantly improved over those of the aircraft having a conventional wing.

Monaghan, R. C.↗

In-flight three-dimensional boundary layer and wake measurements from a swept supercritical wing

Three-dimensional boundary layer and wake velocity profiles were measured in flight on the supercritical wing of the F-111 transonic aircraft technology aircraft. These data, along with pressure distributions, were obtained to establish a data base with which data obtained by three-dimensional analytical techniques could be correlated. Only a brief summary of the total data base is given. The data presented represented one chord station at a wing leading-edge sweep angle of 26 deg. They cover an angle of attack range from 6 degs to 9 degs at free-stream Mach numbers from 0.85 to 0.90. A brief discussion of the techniques used to obtain the boundary layer and wake profiles is included.

Lux, D. P.↗

Avionics and displays in a future airspace system

The terminal configured vehicle (TCV) program was conceived to address the problems of (1) operation in the crowded terminal area airspace, and (2) integration of airborne avionics systems necessary to improve the efficiency of these operations. The program and its interaction with industry task groups are summarized, including elements of research and data collection. New technology is discussed which may be useful in implementing some defined avionics and display requirements.

Salmirs, S.↗

Evaluation of the IMP-16 microprocessor orbit determination system filter

The results of the numerical tests performed in evaluating the interplanetary monitoring platform-16 orbit determination system are presented. The system is capable of performing orbit determination from satellite to satellite tracking data in applications technology satellite range and range rate format. The estimation scheme used is a Kalman filter, sequential (recursive) estimator. Descriptions of the tests performed and tabulations of the numerical results are included.

Shenitz, C. M.↗

A simple, low cost application of a flight test parameter identification system

The flight test system combines state-of-the-art microprocessor technology and high accuracy instrumentation with parameter identification technology which minimize data and flight time requirements. The system was designed to avoid permanent modifications of the test airplane and allow quick installation. It is capable of longitudinal and lateral-directional stability and control derivative estimation. This paper presents details of this system, calibration and flight test procedures, and the results of the Cessna 172 flight test program. The system has proven easy to install, simple to operate, and capable of accurate estimation of stability and control parameters in the Cessna 172 flight tests.

Clarke, R.↗