Search NASA⌕ Search

SEARCH · Search NASA

Results for “Test and analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Walking the ‘design–build–test–learn’ cycle: flux analysis and genetic engineering reveal the pliability of plant central metabolism

Oilseeds are of great economic importance for food and animal feed and their contribution to renewable energy production. Soybean seeds (Glycine max (L.) Merr.) contain c. 40% protein, 20% oil, and 30% carbohydrate (Song et al., 2023). Due to the massive scale of soybean production worldwide, even small improvements in seed protein and oil content make economic sense (Song et al., 2023). Successful manipulation of seed composition largely depends on a thorough understanding of the processes and pathways involved in the biosynthesis of fatty acids and amino acids, which are the building blocks of lipids and proteins. Rational engineering of the synthesis of storage reserves, that is, the rerouting of metabolic flux in central metabolism, is difficult to accomplish due to the complexity of the central metabolic network, the intricate regulation of its enzymes at multiple levels, and the often-unpredictable effects of genetic manipulation (Sweetlove et al., 2017). Therefore, the advancement of our understanding of central metabolism and its control of carbon partitioning requires following an iterative ‘design–build–test–learn’ (DBTL) cycle (Lin & Eudes, 2020) where metabolic flux analysis and hypothesis testing by transgenic approaches are important components. Previous metabolic studies on soybeans using isotopic tracers and metabolic flux analysis have provided insight into how lipid and protein biosynthesis occurs simultaneously during seed development (Allen et al., 2009; Allen & Young, 2013; Kambhampati et al., 2021). In an article published in this issue of New Phytologist, Morley et al. (2023; 1834–1851) put the insights they have gained into the delivery of metabolic precursors and energy cofactors to oil synthesis to the test and arrive at a successful metabolic engineering design. They show that an increase in seed oil content in soybeans can be achieved by overexpression of malic enzyme (ME) during seed development. Malic enzyme refers to a class of decarboxylating malate dehydrogenase enzymes that oxidize malate with NAD + or NADP + as redox cofactor while generating pyruvate and CO 2 . Like higher plants in general, soybean has distinct NADH- or NADPH-producing ME isoforms localized to the cytosol, plastid, or mitochondria (Gerrard Wheeler et al., 2016). As Morley et al. show, an increase in seed oil can be achieved in particular when a NADP+-dependent enzyme isoform (EC 1.1.1.40) is overexpressed in the plastid. Given the complex compartmentalization of pyruvate, malate, and redox metabolism (Fig. 1), increased oil production appears to depend on additional pyruvate and reducing equivalents being produced in the same compartment where de novo fatty acid biosynthesis occurs: the plastid.

59 BASIC BIOLOGICAL SCIENCES↗

Aerothermal Ground Testing of Flexible Thermal Protection Systems for Hypersonic Inflatable Aerodynamic Decelerators

Flexible TPS development involves ground testing and analysis necessary to characterize performance of the FTPS candidates prior to flight testing. This paper provides an overview of the analysis and ground testing efforts performed over the last year at the NASA Langley Research Center and in the Boeing Large-Core Arc Tunnel (LCAT). In the LCAT test series, material layups were subjected to aerothermal loads commensurate with peak re-entry conditions enveloping a range of HIAD mission trajectories. The FTPS layups were tested over a heat flux range from 20 to 50 W/cm with associated surface pressures of 3 to 8 kPa. To support the testing effort a significant redesign of the existing shear (wedge) model holder from previous testing efforts was undertaken to develop a new test technique for supporting and evaluating the FTPS in the high-temperature, arc jet flow. Since the FTPS test samples typically experience a geometry change during testing, computational fluid dynamic (CFD) models of the arc jet flow field and test model were developed to support the testing effort. The CFD results were used to help determine the test conditions experienced by the test samples as the surface geometry changes. This paper includes an overview of the Boeing LCAT facility, the general approach for testing FTPS, CFD analysis methodology and results, model holder design and test methodology, and selected thermal results of several FTPS layups.

Bruce, Walter E., III↗

Flight-testing and frequency-domain analysis for rotorcraft handling qualities

A demonstration of frequency-domain flight-testing techniques and analysis was performed on a U.S. Army OH-58D helicopter in support of the OH-58D Airworthiness and Flight Characteristics Evaluation and of the Army's development and ongoing review of Aeronautical Design Standard 33C, Handling Qualities Requirements for Military Rotorcraft. Hover and forward flight (60 kn) tests were conducted in 1 flight hour by Army experimental test pilots. Further processing of the hover data generated a complete database of velocity, angular-rate, and acceleration-frequency responses to control inputs. A joint effort was then undertaken by the Airworthiness Qualification Test Dirtectorate and the U.S. Army Aeroflightdynamics Directorate to derive handling-quality information from the frequency-domain database using a variety of approaches. This report documents numerous results that have been obtained from the simple frequency-domain tests; in many areas, these results provide more insight into the aircraft dynmamics that affect handling qualities than do traditional flight tests. The handling-quality results include ADS-33C bandwidth and phase-delay calculations, vibration spectral determinations, transfer-function models to examine single-axis results, and a six-degree-of-freedom fully coupled state-space model. The ability of this model to accurately predict responses was verified using data from pulse inputs. This report also documents the frequency-sweep flight-test technique and data analysis used to support the tests.

Ham, Johnnie A.↗

Reduced Uncertainties in the Flutter Analysis of the Aerostructures Test Wing

Tuning the finite element model using measured data to minimize the model uncertainties is a challenging task in the area of structural dynamics. A test validated finite element model can provide a reliable flutter analysis to define the flutter placard speed to which the aircraft can be flown prior to flight flutter testing. Minimizing the difference between numerical and experimental results is a type of optimization problem. Through the use of the National Aeronautics and Space Administration Dryden Flight Research Center's (Edwards, California) multidisciplinary design, analysis, and optimization tool to optimize the objective function and constraints; the mass properties, the natural frequencies, and the mode shapes are matched to the target data, and the mass matrix orthogonality is retained. The approach in this study has been applied to minimize the model uncertainties for the structural dynamic model of the aerostructures test wing, which was designed, built, and tested at the National Aeronautics and Space Administration Dryden Flight Research Center. A 25 percent change in flutter speed has been shown after reducing the uncertainties.

Pak, Chan-Gi↗

Reduced Uncertainties in the Flutter Analysis of the Aerostructures Test Wing

Tuning the finite element model using measured data to minimize the model uncertainties is a challenging task in the area of structural dynamics. A test validated finite element model can provide a reliable flutter analysis to define the flutter placard speed to which the aircraft can be flown prior to flight flutter testing. Minimizing the difference between numerical and experimental results is a type of optimization problem. Through the use of the National Aeronautics and Space Administration Dryden Flight Research Center s (Edwards, California, USA) multidisciplinary design, analysis, and optimization tool to optimize the objective function and constraints; the mass properties, the natural frequencies, and the mode shapes are matched to the target data and the mass matrix orthogonality is retained. The approach in this study has been applied to minimize the model uncertainties for the structural dynamic model of the aerostructures test wing, which was designed, built, and tested at the National Aeronautics and Space Administration Dryden Flight Research Center. A 25-percent change in flutter speed has been shown after reducing the uncertainties

Pak, Chan-gi↗

An evaluation of the MSBLS/nose boom interference for the approach and landing test

An analysis was performed to investigate whether or not the obstruction caused by boom-mounted probes forward of the Orbiter nose could cause Microwave Scan Beam Landing System (MSBLS) data dropout during the autoland flight phase of the Approach and Landing Test (ALT). The results indicate that there will be no interference from the nose boom to cause MSBLS data dropout for the flight conditions under which the ALT is to be performed. Additional analysis considering approach trajectories in more extreme wind conditions than anticipated for the ALT also indicates that the nose boom creates no interference.

Tate, J. M.↗

DO 365 Test Procedure Results and Analysis Discussion

CAL will leverage M&S tools and existing encounter data to evaluate the robustness of the DAA MOPS Test Procedures. Recently, the SC-147 ACAS-Xu team performed an analysis evaluating the Xu implementation against the DAA MOPS test procedures. Several areas of non-compliance were raised, some indicating shortfalls in our DAA test procedures and/or requirements. The ACAS-Xu team is expected to put out a report highlighting these exemptions. This work will build off that ACAS-Xu analysis/report and perform a full characterization of the statistical test procedures and document the findings. Additionally, CAL will provide recommendations for addressing these findings, potentially resulting in changes to test procedures and/or requirements.

ACAS-Xu↗

Diffusion coefficients estimated from turbulence data measured by the Metrac positioning system in Minneapolis field test

An analysis is presented of the tropospheric turbulence data obtained by the Metrac positioning system, a radio location system which employs the Doppler principle to track inexpensive expendable balloon-borne transmitters. A Minneapolis field test of the Metrac system provided one-second samples of transmitter frequency from balloons tracked by four ground stations for more than an hour. The derivation of diffusion coefficients from the turbulence data was conducted by two methods, yielding highly consistent results.

Gage, K. S.↗

Hierarchical Model for Bayesian Hypothesis Testing

A common problem in data analysis is testing a point hypothesis. For example, one might test whether or not the mean of a distribution is zero. We describe the standard Bayesian approach, which requires the choice of a width parameter to define a prior distribution for an alternative hypothesis. Standard practice is to choose this width parameter to be the least favorable choice for the original, point hypothesis. This approach, however, is ad-hoc and not informed by the data. We examine this practice in more detail than in previous work by constructing a hierarchical model, where the width parameter is an unknown value subject to inference. This yields a marginal posterior distribution for the width parameter. We then show that using the median of this marginal posterior distribution as the width parameter in the Bayesian comparison between the hypotheses gives results which are very similar to those obtained from the existing approaches. This gives a more rigorous and data-informed justification for the standard practice of choosing a width parameter which is least favorable to the point hypothesis.

97 MATHEMATICS AND COMPUTING↗

Utilization fo the Satellite Test Assistant Robot (STAR) for Visual and Thermal Analysis for Articles in the Thermal Vacuum Test Environment

An innovative new telerobotic inspection system called STAR has been developed to asist engineers in the visual and thermal analysis fo flight hardware being tested in a simulated space environment. This paper describes the architecture of the STAR mechanical and control systems and discusses some uses of STAR to date.

STAR satellite test assistant robot space simulati↗

Measurement and analysis of acoustic flight test data for two advanced design high speed propeller models

The recent test program, in which the SR-2 and SR-3 Prop-Fan models were acoustically tested in flight, is described and the results of analysis of noise data acquired are discussed. The trends of noise levels with flight operating parameters are shown. The acoustic benefits of the SR-3 design with swept blades relative to the SR-2 design with straight blades are shown. Noise data measured on the surface of a small-diameter microphone boom mounted above the fuselage and on the surface of the airplane fuselage are compared to show the effects of acoustic propagation through a boundary layer. Noise level estimates made using a theoretically based prediction methodology are compared with measurements.

Brooks, B. M.↗

The Importance of Engine External's Health

Engine external components include all the fluid carrying, electron carrying, and support devices that are needed to operate the propulsion system. These components are varied and include: pumps, valves, actuators, solenoids, sensors, switches, heat exchangers, electrical generators, electrical harnesses, tubes, ducts, clamps and brackets. The failure of any component to perform its intended function will result in a maintenance action, a dispatch delay, or an engine in flight shutdown. The life of each component, in addition to its basic functional design, is closely tied to its thermal and dynamic environment .Therefore, to reach a mature design life, the component's thermal and dynamic environment must be understood and controlled, which can only be accomplished by attention to design analysis and testing. The purpose of this paper is to review analysis and test techniques toward achieving good component health.

Stoner, Barry L.↗

Waveforms and Sonic Boom Perception and Response (WSPR): Low-Boom Community Response Program Pilot Test Design, Execution, and Analysis

The Waveforms and Sonic boom Perception and Response (WSPR) Program was designed to test and demonstrate the applicability and effectiveness of techniques to gather data relating human subjective response to multiple low-amplitude sonic booms. It was in essence a practice session for future wider scale testing on naive communities, using a purpose built low-boom demonstrator aircraft. The low-boom community response pilot experiment was conducted in California in November 2011. The WSPR team acquired sufficient data to assess and evaluate the effectiveness of the various physical and psychological data gathering techniques and analysis methods.

Page, Juliet A.↗

Residential PV-Energy Storage Testing Collaboration with SunPower: Cooperative Research and Development Final Report, CRADA Number CRD-14-569

Residential scale energy storage devices have shown great promise to add value and improve the ability to integrate distributed and variable generation into the distribution grid. Battery energy storage systems combined with PV and advanced inverters can provide many services. These include extended backup power in case of grid failure, reductions in feeder and system level peak load, system level net load ramp reduction, grid management services both locally (e.g., voltage management) and bulk system (e.g., reserves) level, and improved grid reliability through grid voltage and frequency support. Even though the cost of the energy storage systems are decreasing, one of the main challenges related to the widespread deployment of energy storage, as found by the U.S. Department of Energy (DOE), is utility acceptance of storage technologies. Various interconnection challenges exist when connecting distributed PV-energy storage into the electrical distribution grid in terms of safety, reliability and stability of the electric power systems. Some of the urgent challenges, as seen by the manufacturers and installers are: safety of the battery cells and the packs, performance of the power conversion systems, effect of bidirectional power flow on existing utility equipment and qualification of solutions such as volt-ampere reactive (VAR) support and frequency regulation. Under this project, National Renewable Energy Laboratory (NREL) researchers will work with SunPower to address these challenges by research, testing and analysis at Energy System Integration Facility (ESIF) and energy storage testing laboratory at NREL. NREL's unique power hardware-in-the-loop (PHIL) capability will be utilized to evaluate system-level issues such as reverse power flow and VAR support (if available) for these PV-energy storage systems. Through the analysis of test results, the proposed project will demonstrate use of ESIF capabilities in a way that advances both the DOE and SunPower's goals of moving clean, renewable energy technologies onto the electrical grid.

14 SOLAR ENERGY↗

Helicopter external noise prediction and correlation with flight test

Mathematical analysis procedures for predicting the main and tail rotor rotational and broadband noise are presented. The aerodynamic and acoustical data from Operational Loads Survey (OLS) flight program are used for validating the analysis and noise prediction methodology. For the long method of rotational noise prediction, the spanwise, chordwise, and azimuthwise airloading is used. In the short method, the airloads are assumed to be concentrated at a single spanwise station and for higher harmonics an airloading harmonic exponent of 2.0 is assumed. For the same flight condition, the predictions from long and short methods of rotational noise prediction are compared with the flight test results. The short method correlates as well or better than the long method.

Gupta, B. P.↗