Search NASA⌕ Search

SEARCH · Search NASA

Results for “Use”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Quantum simulator of an open quantum system using superconducting qubits: exciton transport in photosynthetic complexes

Open quantum system approaches are widely used in the description of physical, chemical and biological systems. A famous example is electronic excitation transfer in the initial stage of photosynthesis, where harvested energy is transferred with remarkably high efficiency to a reaction center. This transport is affected by the motion of a structured vibrational environment, which makes simulations on a classical computer very demanding. Here we propose an analog quantum simulator of complex open system dynamics with a precisely engineered quantum environment. Our setup is based on superconducting circuits, a well established technology. As an example, we demonstrate that it is feasible to simulate exciton transport in the Fenna–Matthews–Olson photosynthetic complex. Our approach allows for a controllable single-molecule simulation and the investigation of energy transfer pathways as well as non-Markovian noise-correlation effects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Prediction of divertor heat flux width for ITER using BOUT++ transport and turbulence module

Investigation of turbulent transport dynamics in scrape-off-layer (SOL) and divertor heat flux width prediction is performed for ITER. Both BOUT++ transport and BOUT++ turbulence codes are applied to capture the physics on different temporal scales. Simulations start with an ITER 15MA baseline scenario profile generated by CORSICA (Kim et al 2015 Paper ITER_D_R9T8J9 v1.1). In BOUT++ transport code, the plasma parameters ( n i , T i , T e ) and radial electric () profiles are evolved to steady state. Here, the initial plasma profiles inside the separatrix are taken from CORSICA scenario studies. Transport coefficients are calculated by inverting the plasma profiles inside the separatrix.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Forcing Cesium into Higher Oxidation States Using Useful hard x-ray Induced Chemistry under High Pressure

This paper discusses our attempt to synthesize higher oxidation forms of cesium fluoride by pressurizing cesium fluoride in a fluorine-rich environment created via the x-ray decomposition of potassium tetrafluoroborate. This was done in order to confirm recent theoretical predictions of higher oxidation forms of CsFn. We discuss the development of a technique to produce molecular fluorine in situ via useful hard x-ray photochemistry, and the attempt to utilize this technique to form higher oxidation states of cesium fluoride. In order to verify the formation of the novel stoichiometric species of CsFn. X-ray Absorption Near Edge Spectroscopy (XANES) centered on the cesium K-edge was performed to probe the oxidation state of cesium as well as the local molecular coordination around Cs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electron and photon performance measurements with the ATLAS detector using the 2015–2017 LHC proton-proton collision data

This paper describes the reconstruction of electrons and photons with the ATLAS detector, as employed for measurements and searches exploiting the complete LHC Run 2 dataset. An improved energy clustering algorithm is introduced, and its implications for the measurement and identification of electrons and photons are discussed in detail. Corrections and calibrations that affect performance, including energy calibration, identification and isolation efficiencies, and the measurement of the charge of reconstructed electron candidates are determined using up to 81 fb -1 of proton-proton collision data collected at $\sqrt{s}=$ 13 TeV between 2015 and 2017.

47 OTHER INSTRUMENTATION↗

Recovery of coincident frequency domain multiplexed detector pulses using sequential deconvolution

Multiplexing of radiation detector signals into a single channel significantly reduces the need for a large number of digitizer channels, which reduces the cost and the power consumption of a data acquisition system. We previously demonstrated frequency domain multiplexing by convolution using a prototype system that multiplexed two EJ-309 organic scintillators signals into a single channel. Each detector pulse was converted to a damped sinusoid which was then combined into a single channel. The combined signal was digitized and the original detector signal was recovered from the damped sinusoid by deconvolution. In this paper, we demonstrate the recovery of multiple detector signals that arrive during the same digitized record via a new sequential deconvolution method. Here, when two detectors produce signals in the same digitized record and their pulses do not overlap in time, we found that the charge, arrival time, and particle type can be estimated fairly precisely for the first pulse, but the second pulse exhibits substantial degradation in the precision of the estimated charge and arrival time. When the pulses overlap in time, we demonstrate both theoretically and experimentally that the part of the first pulse that does not overlap with the second can be recovered accurately, so the arrival time and amplitude of the first pulse can be estimated fairly precisely, but not the charge or particle type. None of these quantities can be estimated precisely for the second pulse when the two pulses overlap.

47 OTHER INSTRUMENTATION↗

Understanding temperature and magnetic-field actuated magnetization polarity reversal in the Prussian blue analogue Cu 0.73 Mn 0.77 [Fe(CN) 6 ]. z H 2 O, using XMCD

We have investigated the microscopic origin of temperature and magnetic-field actuated magnetization reversal in Cu0.73Mn0.77[Fe(CN)(6)]center dot zH(2)O, using XMCD. Our results show a fair deviation from the mean-field-theory in the form of different ordering temperatures of Fe and Mn sublattices. A preferential sign reversal of Mn spin under magnetic field and different spin cant angles for the two sublattices have also been observed. An antiferromagnetic coupling between the Fe and Mn sublattices along with different ordering temperatures (sublattice decoupling) for these sublattices explain the temperature-dependent magnetization reversal. Whereas, Mn spin reversal alone (under external magnetic field) is responsible for the observed field-dependent magnetization reversal. The dissimilar magnetic behavior of Fe and Mn sublattices in this cubic 3d-orbital system has been understood by invoking disparity and competition among inter-sublattice magnetic control parameters, viz. magnetic Zeeman energy, exchange coupling constant and magnetic anisotropy constant. Our results have significant design implications for future magnetic switches, by optimizing the competition among these magnetic control parameters.

Lahiri, Debdutta↗

Detection of hot electrons originating from an upper valley at ∼1.7eV above the Γ valley in wurtzite GaN using electron emission spectroscopy

Using electron emission spectroscopy, measurement and analysis were conducted on the energy distribution of vacuum emitted electrons from electrically driven InGaN/GaN green (peak wavelengths 𝜆 ≈ 515nm) light-emitting diodes (LEDs) with and without a prewell superlattice (SL). Here, we report on the detection of a high-energy upper valley at ∼ 1.7eV above the Γ valley from samples with no prewell SL. We propose that these upper valley electrons originate predominantly from trap-assisted Auger recombination (TAAR) in green LEDs, as the intensity of these peaks is found to have quadratic dependence on the carrier density 𝑛 [see Espenlaub et al., J. Appl. Phys. 126, 184502 (2019)]. The high-energy upper valley peak was not observed in the sample with a prewell SL which is attributed to gettering by the prewell SL of still unidentified impurities that act as TAAR centers.

carrier generation & recombination↗

High Multiplicity Searches at the LHC Using Jet Masses

This article introduces a new class of searches for physics beyond the Standard Model that improves the sensitivity to signals with high jet multiplicity. The proposed searches gain access to high multiplicity signals by reclustering events into large-radius, or 'fat', jets and by requiring that each event has multiple massive jets. This technique is applied to supersymmetric scenarios in which gluinos are pair-produced and then subsequently decay to final states with either moderate quantities of missing energy or final states without missing energy. In each of these scenarios, the use of jet mass improves the estimated reach in gluino mass by 20% to 50% over current LHC searches.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Correlated, precision measurements of θ 23 and δ using only the electron neutrino appearance experiments

Precision measurement of the leptonic CP violating phase δ will suffer from the, then surviving, large uncertainty of sin 2 θ 23 of 10–20% in the experimentally interesting region near maximal mixing of θ 23 . We advocate a new method for determination of both θ 23 and δ at the same time using only the ν e and ν̄ e appearance channels and show that sin 2 θ 23 can be determined automatically with much higher accuracy, approximately a factor of six, than sinδ. In this method, we identify a new degeneracy for the simultaneous determination of θ 23 and δ, the θ 23 intrinsic degeneracy, which must be resolved in order to achieve precision measurement of these two parameters. Spectral information around the vacuum oscillation maxima is shown to be the best way to resolve this degeneracy.

Minakata, Hisakazu↗

Search for microscopic black holes in a like-sign dimuon final state using large track multiplicity with the ATLAS detector

A search is presented for microscopic black holes in a like-sign dimuon final state in proton-proton collisions at $ \sqrt{s}$=8 TeV. The data were collected with the ATLAS detector at the Large Hadron Collider in 2012 and correspond to an integrated luminosity of 20.3 fb -1 . Using a high track multiplicity requirement, 0.6±0.2 background events from Standard Model processes are predicted and none observed. This result is interpreted in the context of low-scale gravity models and 95% C.L. lower limits on microscopic black hole masses are set for different model assumptions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of D 0 - D ¯ 0 mixing and search for indirect C P violation using D 0 → K S 0 π + π - decays

Here, we report a measurement of D 0 - D ¯ 0 mixing parameters and a search for indirect C P violation through a time-dependent amplitude analysis of D 0 → K S 0 π + π - decays. The results are based on 921 fb - 1 of data accumulated with the Belle detector at the KEKB asymmetric-energy e + e - collider. Assuming C P conservation, we measure the mixing parameters x = ( 0.56 ± 0.19 - 0.09 - 0.09 + 0.03 + 0.06 ) % and y = ( 0.30 ± 0.15 - 0.05 - 0.06 + 0.04 + 0.03 ) % , where the errors are statistical, experimental systematic, and systematic due to the amplitude model, respectively. Lastly, with C P violation allowed, the parameters | q / p | = 0.90 - 0.15 - 0.04 - 0.05 + 0.16 + 0.05 + 0.06 and arg ( q / p ) = ( - 6 ± 11 ± 3 - 4 + 3 ) ° are found to be consistent with conservation of C P symmetry in mixing and in the interference between mixing and decay, respectively.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗