Search NASA⌕ Search

SEARCH · Search NASA

Results for “cloud parameterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

A Meteorological Model's Dependence on Radiation Update Frequency

Numerical weather models are used to simulate circulations in the atmosphere including clouds and precipitation by applying a set of mathematical equations over a three-dimensional grid. The grid is composed of discrete points at which the meteorological variables are defined. As computing power continues to rise these models are being used at finer grid spacing, but they must still cover a wide range of scales. Some of the physics that must be accounted for in the model cannot be explicitly resolved, and their effects, therefore, must be estimated or "parameterized". Some of these parameterizations are computationally expensive. To alleviate the problem, they are not always updated at the time resolution of the model with the assumption being that the impact will be small. In this study, a coupled land-atmosphere model is used to assess the impact of less frequent updates of the computationally expensive radiation physics for a case on June 6, 2002, that occurred during a field experiment over the central plains known as International H20 Project (IHOP). The model was tested using both the original conditions, which were dry, and with modified conditions wherein moisture was added to the lower part of the atmosphere to produce clouds and precipitation (i.e., a wet case). For each of the conditions (i.e., dry and wet), four set of experiments were conducted wherein the model was run for a period of 24 hours and the radiation fields (including both incoming solar and outgoing longwave) were updated every 1, 3, 10, and 100 time steps. Statistical tests indicated that average quantities of surface variables for both the dry and wet cases were the same for the various update frequencies. However, spatially the results could be quite different especially in the wet case after it began to rain. The near-surface wind field was found to be different most of the time even for the dry case. In the wet case, rain intensities and average vertical profiles of heating associated with cloudy areas were found to differ for the various radiation update frequencies. The latter implies that the mean state of the model could be different as a result of not updating the radiation fields every time step and has important implications for longer term climate studies

Eastman, Joseph L.↗

Sensitivity of summer ensembles of fledgling superparameterized U.S. mesoscale convective systems to cloud resolving model microphysics and grid configuration

The sensitivities of simulated mesoscale convective systems (MCSs) in the central U.S. to microphysics and grid configuration are evaluated here in a global climate model (GCM) that also permits global-scale feedbacks and variability. Since conventional GCMs do not simulate MCSs, studying their sensitivities in a global framework useful for climate change simulations has not previously been possible. To date, MCS sensitivity experiments have relied on controlled cloud resolving model (CRM) studies with limited domains, which avoid internal variability and neglect feedbacks between local convection and larger-scale dynamics. However, recent work with superparameterized (SP) GCMs has shown that eastward propagating MCS-like events are captured when embedded CRMs replace convective parameterizations. This study uses a SP version of the Community Atmosphere Model version 5 (SP-CAM5) to evaluate MCS sensitivities, applying an objective empirical orthogonal function algorithm to identify MCS-like events, and harmonizing composite storms to account for seasonal and spatial heterogeneity. A five-summer control simulation is used to assess the magnitude of internal and interannual variability relative to 10 sensitivity experiments with varied CRM parameters, including ice fall speed, one-moment and two-moment microphysics, and grid spacing. MCS sensitivities were found to be subtle with respect to internal variability, and indicate that ensembles of over 100 storms may be necessary to detect robust differences in SP-GCMs. Furthermore, these results emphasize that the properties of MCSs can vary widely across individual events, and improving their representation in global simulations with significant internal variability may require comparison to long (multidecadal) time series of observed events rather than single season field campaigns.

54 ENVIRONMENTAL SCIENCES↗

A nested-grid limited-area model for short term weather forecasting

The present investigation is concerned with a mesoscale atmospheric simulation system (MASS), incorporating the sigma-coordinate primitive equations. The present version of this model (MASS 3.0) has 14 vertical layers, with the upper boundary at 100 mb. There are 128 x 96 grid points in each layer. The earlier version of this model (MASS 2.0) has been described by Kaplan et al. (1982). The current investigation provides a summary of major revisions to that version and a description of the parameterization schemes which are presently included in the model. The planetary boundary layer (PBL) is considered, taking into account aspects of generalized similarity theory and free convection, the surface energy budget, the surface moisture budget, and prognostic equations for the depth h of the PBL. A cloud model is discussed, giving attention to stable precipitation, and cumulus convection.

Wong, V. C.↗

Flat spectrum T Tauri stars: The case for infall

We show that the mid- to far-infrared fluxes of 'flat spectrum' T Tauri stars can be explained by radiative equilibrium emission from infalling dusty envelopes. Infall eliminates the need for accretion disks with non-standard temperature distributions. The simplicity and power of this explanantion indicates that models employing 'active' disks, in which the temperature distribution is a parameterized power law, should be invoked with caution. Infall also naturally explains the scattered light nebulae detected around many flat spectrum sources. To match the observed spectra, material must fall onto a disk rather than the central star, as expected for collapse of a rotating molecular cloud. It may be necessary to invoke cavities in the envelopes to explain the strength of optical and near-infrared emission; these cavities could be produced by the powerful bipolar outflows commonly observed from young stars. If viewed along the cavity, a source may be lightly extincted at visual wavelengths, while still accreting substantial amounts of material from the envelope. Infall may also be needed to explain the infrared-bright companions of many optical T Tauri stars. This picture suggests that many of the flat spectrum sources are 'protostars'-young stellar objects surrounded by dust infalling envelopes of substantial mass.

Calvet, Nuria↗

Investigating Extreme Events in the NASA GEOS Multiscale Modeling System

Advances in computing capabilities and scientific development have come together to evolve general circulation models into multi-scale Earth system modeling tools. The Goddard Earth Observing System (GEOS) model is one such example of this evolution. The GEOS model is driven by the finite-volume cubed-sphere (FV3) non-hydrostatic dynamical core. Surrounding FV3 is a scale-aware physics package and data assimilation capability permitting multi-scale application of GEOS for sub-seasonal to seasonal climate prediction, medium range weather prediction, and global mesoscale modeling at convection allowing resolutions. GEOS also includes a comprehensive chemistry package representing a range of capabilities from basic chemistry and interactve aerosols and gaseous species, to carbon emissions and uptake, and complex ozone photochemistry. In this study, we apply the GEOS model to study the fidelity of these processes with increasing horizontal resolution and scale-aware processes in GEOS on extreme events. The GEOS model is run for 40-days beginning in August 2016 at three uniform global resolutions of 13-km (c768), 6-km (c1536) and 3-km (c3072) with 72 vertical levels up to 0.01mb. The model physics use the Grell-Freitas scale-aware convection scheme to dynamically reduce the role of parameterized deep convection as resolved scale processes in the model take over at higher resolutions. We will include high-resolution global emissions and fluxes of aerosols and carbon downscaled from recent satellite observations. We will compare these simulations with reanalyses and observations, focusing on rainfall, clouds and radiative forcing at hourly to monthly timescales. We will closely examine the probability distribution of precipitation intensities and radiative properties of clouds on a daily time scale. In addition, we will focus on extreme events, in particular the diurnal cycle of convection over the US and the frequency and physical nature of organized convection and heavy rain events across the globe.

Putman, William↗

Development and preliminary tests of a new long-wave radiation parameterization

An efficient broad band longwave radiation code for CO2 and H2O and for O3 was developed. There are two bands each in the CO2 and H2O absorption regions, one for the band center and one for the band wings. One band covers O3 absorption and the overlapping H2O continuum. Overlap is also considered in the CO2 region, and there is H2O continuum absorption where applicable. Clouds are considered nonreflecting in the longwave. Therefore partial cover or partial transmission can be allowed for, by considering a cloud fraction at each atmospheric level. A special subroutine was written to allow for maximum or random overlap of clouds that may be used in the future. All algorithms were written with vectorization in mind with identical operations made for all horizontal grid points in a latitude circle. Where possible, operations are carried out covering the vertical grid points as well, yielding long vectors for efficient computations.

HARSHVARDHAN↗

Towards Autonomous Lunar Resource Excavation via Deep Reinforcement Learning

To support sustainable infrastructure on the Moon, NASA needs to leverage lunar resources for in-situ processing and construction. NASA’s Regolith Advanced Surface Systems Operations Robot (RASSOR) is principally designed to mine and deliver regolith for these tasks. To reliably perform these operations on the lunar surface, RASSOR's sensors and control systems need to be robust and maximize information extracted from a reduced sensor payload. Herein, we present our findings from the Intelligent Capabilities Enhanced RASSOR project. We created reduced-order simulation environments in which we applied reinforcement learning algorithms to learn autonomous trenching controllers and produced state estimation architectures. We developed two simulations: a 2D excavation simulation used to facilitate parameter selection, and a 3D simulation developed using a game physics engine to simulate simplified soil interactions and incorporate robotic agents parameterized by dynamic models. Within these simulations, we learned autonomous excavation routines that exceed excavation efficiency measures as compared against RASSOR's existing control and teleoperation-based methods.

RASSOR↗

Towards Autonomous Lunar Resource Excavation via Deep Reinforcement Learning

To support sustainable infrastructure on the Moon, NASA needs to leverage lunar resources for in-situ processing and construction. NASA’s Regolith Advanced Surface Systems Operations Robot (RASSOR) is principally designed to mine and deliver regolith for these tasks. To reliably perform these operations on the lunar surface, RASSOR's sensors and control systems need to be robust and maximize information extracted from a reduced sensor payload. Herein, we present our findings from the Intelligent Capabilities Enhanced RASSOR project. We created reduced-order simulation environments in which we applied reinforcement learning algorithms to learn autonomous trenching controllers and produced state estimation architectures. We developed two simulations: a 2D excavation simulation used to facilitate parameter selection, and a 3D simulation developed using a game physics engine to simulate simplified soil interactions and incorporate robotic agents parameterized by dynamic models. Within these simulations, we learned autonomous excavation routines that exceed excavation efficiency measures as compared against RASSOR's existing control and teleoperation-based methods.

RASSOR↗

Marine ARM GPCI Investigation of Clouds Infrared Sea Surface Temperature Autonomous Radiometer (ISAR) Field Campaign Report

Sea surface temperature (SST) is one of the most appropriate and important climate parameters: a widespread increase is an indicator of global warming and modifications of the geographical distribution of SST are an extremely sensitive indicator of climate change. There is high demand for accurate, reliable, high-spatial-and-temporal-resolution SST measurements for the parameterization of ocean-atmosphere heat, momentum, and gas (SST is therefore critical to understanding the processes controlling the global carbon dioxide budget) fluxes, for detailed diagnostic and process-orientated studies to better understand the behavior of the climate system, as model boundary conditions, for assimilation into climate models, and for the rigorous validation of climate model output. In order to achieve an overall net flux uncertainty < 10 W/m 2 (Bradley and Fairall, 2006), the sea surface (skin) temperature (SSST) must be measured to an error < 0.1 C and a precision of 0.05 C. Anyone experienced in shipboard meteorological measurements will recognize this is a tough specification. These demands require complete confidence in the content, interpretation, accuracy, reliability, and continuity of observational SST data—criteria that can only be fulfilled by the successful implementation of an ongoing data product validation strategy.

54 ENVIRONMENTAL SCIENCES↗

The origin of water vapor rings in tropical oceanic cold pools

Tropical deep convection over the ocean is found to grow preferentially from thermodynamically preconditioned regions of high specific humidity and, thus, high moist static energy. Because of this, rings of enhanced specific humidity at the leading edges of evaporatively driven cold pools have recently received considerable attention. The prevailing theory explains these rings by the water vapor source from the evaporation of rain drops below cloud base. Their origin is reported on in this letter using large-eddy simulations of individual cumulus clouds that rise into a tropical atmosphere over ocean. It is demonstrated that - in contrast to this theory - water vapor rings are primarily explained by surface latent heat fluxes rather than by the evaporation of rain. This result implies that conceptual models used in subgrid-scale parameterizations of deep convection should consider the formation of rings of increased specific humidity by the cold-pool-induced enhancement of surface fluxes.

54 ENVIRONMENTAL SCIENCES↗

MID-J CO EMISSION FROM NGC 891: MICROTURBULENT MOLECULAR SHOCKS IN NORMAL STAR-FORMING GALAXIES

We have detected the CO(6-5), CO(7-6), and [C I] 370 {mu}m lines from the nuclear region of NGC 891 with our submillimeter grating spectrometer ZEUS on the Caltech Submillimeter Observatory. These lines provide constraints on photodissociation region (PDR) and shock models that have been invoked to explain the H{sub 2} S(0), S(1), and S(2) lines observed with Spitzer. We analyze our data together with the H{sub 2} lines, CO(3-2), and infrared continuum from the literature using a combined PDR/shock model. We find that the mid-J CO originates almost entirely from shock-excited warm molecular gas; contributions from PDRs are negligible. Also, almost all of the H{sub 2} S(2) line and half of the S(1) line are predicted to emerge from shocks. Shocks with a pre-shock density of 2 Multiplication-Sign 10{sup 4} cm{sup -3} and velocities of 10 km s{sup -1} and 20 km s{sup -1} for C-shocks and J-shocks, respectively, provide the best fit. In contrast, the [C I] line emission arises exclusively from the PDR component, which is best parameterized by a density of 3.2 Multiplication-Sign 10{sup 3} cm{sup -3} and a far-ultraviolet field of G{sub o} = 100 for both PDR/shock-type combinations. Our mid-J CO observations show that turbulence is a very important heating source in molecular clouds, even in normal quiescent galaxies. The most likely energy sources for the shocks are supernovae or outflows from young stellar objects. The energetics of these shock sources favor C-shock excitation of the lines.

79 ASTRONOMY AND ASTROPHYSICS↗

Assessment of Warm and Dry Bias over ARM SGP Site in E3SMv2 and E3SM-MMF

Abstract Many climate models exhibit a dry and warm bias over the central United States during the summer months, including the Energy Exascale Earth System Model (E3SM) and its Multiscale Modeling Framework (MMF) configuration. Understanding the causes of this bias is important to shine a light on this common model error and reduce the uncertainty in future projections. In this study, we use E3SMv2 and E3SM-MMF to assess how parameterized and resolved convection affect temperature and precipitation biases over the Southern Great Plains site of the Atmospheric Radiation Measurement program. Both configurations overestimate near-surface temperature and underestimate precipitation at the ARM SGP site. The bias is associated with a lack of low-level clouds during days without precipitation and too much incoming solar radiation causing the surface to warm. Low-level cloud fraction in E3SM-MMF during the nonprecipitating days is lower in comparison to E3SMv2 and observation, consistent with the larger warm bias. We also find that the underestimated precipitation can be characterized as “too frequent, too weak” in E3SMv2 and “too rare, too intense” in E3SM-MMF. These deficiencies conspire to sustain the warm and dry bias over the central United States.

54 ENVIRONMENTAL SCIENCES↗

Remote-sensing detectability of airborne Arctic dust

Remote-sensing (RS)-based estimates of Arctic dust are oftentimes overestimated due to a failure in separating out the dust contribution from that of spatially homogeneous clouds or low-altitude cloud-like plumes. A variety of illustrations are given with a particular emphasis on questionable claims of using brightness temperature differences (BTDs) as a signature indicator of Arctic dust transported from mid-latitude deserts or generated by local Arctic sources. While there is little dispute about the presence of both Asian and local dust across the Arctic, the direct RS detectability of airborne dust, as ascribed to satellite (MODIS and AVHRR) measurements of significantly negative brightness temperature differences at 11 and 12 µm (BTD 11–12 ), has been misrepresented in certain cases. While it is difficult to account for all examples of strongly negative BTD 11–12 values in the Arctic, it is unlikely that airborne dust plays a significant role. One much more likely contributor would be water clouds in the Arctic inversion layer. The RS detectability of the impact of Arctic dust (notably due to Arctic dust from local sources) can, however, be of significance. Sustained dust deposition can substantially decrease (visible to shortwave IR) snow and ice reflectance albedo (pan-chromatic reflectance) and the signal measured by satellite sensors. Significantly negative BTD 11–12 values would, however, only represent a limited area near the drainage basin sources according to our event-level case studies. The enhanced ice-nucleating particle (INP) role of local Arctic dust can, for example, induce significant changes in the properties of low-level mixed-phase clouds (cloud optical depth changes <~ 1) that can readily be detected by active and passive RS instruments. It is critical that the distinction between the RS detectability of airborne Arctic dust versus the RS detectability of the impacts of that dust be understood if we are to appropriately parameterize, for example, the radiative forcing influence of dust in this climate-sensitive region.

54 ENVIRONMENTAL SCIENCES↗

Mesoscale Convective Systems in SCSMEX: Simulated by a Regional Climate Model and a Cloud Resolving Model

A Regional Land-Atmosphere Climate Simulation (RELACS) System is being developed and implemented at NASA Goddard Space Flight Center. One of the major goals of RELACS is to use a regional scale model with improved physical processes, in particular land-related processes, to understand the role of the land surface and its interaction with convection and radiation as well as the water and energy cycles in Indo-China/ South China Sea (SCS)/China, N. America and S. America. The Penn State/NCAR MM5 atmospheric modeling system, a state of the art atmospheric numerical model designed to simulate regional weather and climate, has been successfully coupled to the Goddard Parameterization for Land-Atmosphere-C loud Exchange (PLACE) land surface model. PLACE allows for the effects of vegetation, and thus important physical processes such as evapotranspiration and interception are included. The PLACE model incorporates vegetation type and has been shown in international comparisons to accurately predict evapotranspiration and runoff over a wide variety of land surfaces. The coupling of MM5 and PLACE creates a numerical modeling system with the potential to more realistically simulate the atmosphere and land surface processes including land-sea interaction, regional circulations such as monsoons, and flash flood events. RELACS has been used to simulate the onset of the South China Sea Monsoon in 1986, 1997 and 1998. Sensitivity tests on various land surface models, cumulus parameterization schemes (CPSs), sea surface temperature (SST) variations and midlatitude influences have been performed. These tests have indicated that the land surface model has a major impact on the circulation over the S. China Sea. CPSs can effect the precipitation pattern while SST variation can effect the precipitation amounts over both land and ocean. RELACS has also been used to understand the soil-precipitation interaction and feedback associated with a flood event that occurred in and around China's Yantz River during 1998. The exact location (region) of the flooding can be effected by the soil-rainfall feedback. Also, the Goddard Cumulus Ensemble (GCE) model which allows for realistic moist processes as well as explicit interactions between cloud and radiation, and cloud and surface processes will be used to simulate convective systems associated with the onset of the South China Sea Monsoon in 1998. The GCE model also includes the same PLACE and radiation scheme used in the RELACS. A detailed comparison between the results from the GCE model and RELACS will be performed.

Tao, W.-K.↗

Satellite Imagery Analysis for Nighttime Temperature Inversion Clouds

Clouds play important roles in the climate system. Their optical and microphysical properties, which largely determine their radiative property, need to be investigated. Among several measurement means, satellite remote sensing seems to be the most promising. Since most of the cloud algorithms proposed so far are daytime use which utilizes solar radiation, Minnis et al. (1998) developed a nighttime use one using 3.7-, 11 - and 12-microns channels. Their algorithm, however, has a drawback that is not able to treat temperature inversion cases. We update their algorithm, incorporating new parameterization by Arduini et al. (1999) which is valid for temperature inversion cases. This updated algorithm has been applied to GOES satellite data and reasonable retrieval results were obtained.

Kawamoto, K.↗

General Circulation Models Simulate Negative Liquid Water Path­–Droplet Number Correlations, but Anthropogenic Aerosols Still Increase Simulated Liquid Water Path

General circulation models' (GCMs) estimates of the liquid water path adjustment to anthropogenic aerosol emissions differ in sign from other lines of evidence. This reduces confidence in estimates of the effective radiative forcing of the climate by aerosol–cloud interactions (ERFaci). The discrepancy is thought to stem in part from GCMs' inability to represent the turbulence–microphysics interactions in cloud-top entrainment, a mechanism that leads to a reduction in liquid water in response to an anthropogenic increase in aerosols. In the real atmosphere, enhanced cloud-top entrainment is thought to be the dominant adjustment mechanism for liquid water path, weakening the overall ERFaci. We show that the latest generation of GCMs includes models that produce a negative correlation between the present-day cloud droplet number and liquid water path, a key piece of observational evidence supporting liquid water path reduction by anthropogenic aerosols and one that earlier-generation GCMs could not reproduce. However, even in GCMs with this negative correlation, the increase in anthropogenic aerosols from preindustrial to present-day values still leads to an increase in the simulated liquid water path due to the parameterized precipitation suppression mechanism. This adds to the evidence that correlations in the present-day climate are not necessarily causal. We investigate sources of confounding to explain the noncausal correlation between liquid water path and droplet number. These results are a reminder that assessments of climate parameters based on multiple lines of evidence must carefully consider the complementary strengths of different lines when the lines disagree.

General circulation models↗

Modeling the Impact of the Organic Aerosol Phase State on Multiphase OH Reactive Uptake Kinetics and the Resultant Heterogeneous Oxidation Timescale of Organic Aerosol in the Amazon Rainforest

Accurate predictions of chemical lifetime, i.e., oxidation timescale and change in the mass of organic aerosols (OAs) in atmospheric models, are critical to quantify the impacts of OA on aerosol–cloud interactions, radiative forcing, and air quality. The heterogeneous oxidation of OA by hydroxyl (OH) radicals is a key process governing OA mass changes during their oxidation. Recently, laboratory observations of the OH uptake coefficient (γ OH ) and heterogeneous reaction rate (k het,OH ) for different OA systems with varying phase states have been combined to develop a new parameterization of γ OH and k het,OH as a function of the OA phase state, i.e., viscosity (η OA ). Here, in this work, we use a recently published viscosity prediction framework to analyze the new γ OH and k het,OH parameterization with a box model. Subsequently, we implement this box model to predict γ OH and k het,OH over the Amazon rainforest in the dry-to-wet transition season with both significant biomass burning and biogenic influences. Relevant parameters within our box model are specified based on detailed regional model simulations over the Amazon using the Weather Research and Forecasting model coupled with Chemistry (WRF-Chem). η OA is predicted as a function of species volatility, OA composition (including water uptake) along with ambient relative humidity (RH), and temperature. Based on ambient conditions simulated by WRF-Chem over the entire atmospheric column, we use the box model to predict the upper bounds of the heterogeneous oxidation timescale of OA. Based on previous laboratory measurements, we assume that this heterogeneous OH oxidation causes fragmentation (carbon loss) of OA, followed by the evaporation of the fragmented molecules that results in the exponential decay of OA. We predict that the oxidation timescale of OA is ~1 month near the Earth’s surface in the pristine Amazonian background because of low OH concentrations. But OA is oxidized more rapidly within urban and wildfire plumes near the Earth’s surface with an order of magnitude higher OH concentrations compared to the pristine background, causing the simulated oxidation timescale of OA to be much shorter, ~3–4 days. At 3–5 km altitudes where biomass burning OA is predicted to be semisolid, the heterogeneous oxidation timescale is estimated as ~6 days to 3 weeks and decreases with increasing OH concentrations within plumes. We show that the simulated mass loss of OA is strongly size-dependent, where smaller particles oxidize more rapidly compared to larger particles due to their greater per-particle surface area-to-volume ratio. Increasing urbanization and deforestation in the Amazon in the future might increase OH concentrations in the background Amazon, causing faster oxidation of OA. At higher altitudes above liquid clouds, especially in the upper troposphere where temperatures approach ~250 K, future measurements are needed to reduce the uncertainties related to the mass loss of OA at colder temperatures and low relative humidity conditions due to its heterogeneous OH oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Non‐Linear Dimensionality Reduction With a Variational Encoder Decoder to Understand Convective Processes in Climate Models

Abstract Deep learning can accurately represent sub‐grid‐scale convective processes in climate models, learning from high resolution simulations. However, deep learning methods usually lack interpretability due to large internal dimensionality, resulting in reduced trustworthiness in these methods. Here, we use Variational Encoder Decoder structures (VED), a non‐linear dimensionality reduction technique, to learn and understand convective processes in an aquaplanet superparameterized climate model simulation, where deep convective processes are simulated explicitly. We show that similar to previous deep learning studies based on feed‐forward neural nets, the VED is capable of learning and accurately reproducing convective processes. In contrast to past work, we show this can be achieved by compressing the original information into only five latent nodes. As a result, the VED can be used to understand convective processes and delineate modes of convection through the exploration of its latent dimensions. A close investigation of the latent space enables the identification of different convective regimes: (a) stable conditions are clearly distinguished from deep convection with low outgoing longwave radiation and strong precipitation; (b) high optically thin cirrus‐like clouds are separated from low optically thick cumulus clouds; and (c) shallow convective processes are associated with large‐scale moisture content and surface diabatic heating. Our results demonstrate that VEDs can accurately represent convective processes in climate models, while enabling interpretability and better understanding of sub‐grid‐scale physical processes, paving the way to increasingly interpretable machine learning parameterizations with promising generative properties.

54 ENVIRONMENTAL SCIENCES↗