Search NASA⌕ Search

SEARCH · Search NASA

Results for “differences atmosphere.”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Origins of climate model discrepancies in atmospheric shortwave absorption and global precipitation changes

Projected increases in mean precipitation are constrained by the atmospheric energy budget through radiative-convective equilibrium. Yet, significant differences persist between climate models on the rate of increase in precipitation per unit warming, mostly arising from the clear-sky radiative response. While the intermodel spread in clear-sky longwave cooling has been explained by climate feedbacks, the sources of spread in clear-sky shortwave heating are still unclear. We focus on the latter. Since water vapor contributes most of the atmospheric shortwave absorption, both intermodel differences in its spatial distribution and in radiative transfer parameterizations are plausible hypotheses for the spread. This report reestablishes the primary contribution from water vapor relative to other shortwave-absorbing species and evaluates the validity of both hypotheses. It is found that the intermodel spread in shortwave absorption change most likely originates from the radiation schemes, possibly because of simplifications induced by their low spectral resolutions.

54 ENVIRONMENTAL SCIENCES↗

SPECTRAL AND PHOTOMETRIC DIAGNOSTICS OF GIANT PLANET FORMATION SCENARIOS

Gas-giant planets that form via core accretion might have very different characteristics from those that form via disk instability. Disk-instability objects are typically thought to have higher entropies, larger radii, and (generally) higher effective temperatures than core-accretion objects. In this paper, we provide a large set of models exploring the observational consequences of high-entropy (hot) and low-entropy (cold) initial conditions, in the hope that this will ultimately help to distinguish between different physical mechanisms of planet formation. However, the exact entropies and radii of newly formed planets due to these two modes of formation cannot, at present, be precisely predicted. It is possible that the distribution of properties of core-accretion-formed planets and the distribution of properties of disk-instability-formed planets overlap. We, therefore, introduce a broad range of 'warm-start' gas-giant planet models. Between the hottest and the coldest models that we consider, differences in radii, temperatures, luminosities, and spectra persist for only a few million to a few tens of millions of years for planets that are a few times Jupiter's mass or less. For planets that are {approx}five times Jupiter's mass or more, significant differences between hottest-start and coldest-start models persist for on the order of 100 Myr. We find that out of the standard infrared bands (J, H, K, L', M, N) the K and H bands are the most diagnostic of the initial conditions. A hottest-start model can be from {approx}4.5 mag brighter (at Jupiter's mass) to {approx}9 mag brighter (at 10 times Jupiter's mass) than a coldest-start model in the first few million years. In more massive objects, these large differences in luminosity and spectrum persist for much longer than in less massive objects. Finally, we consider the influence of atmospheric conditions on spectra, and find that the presence or absence of clouds, and the metallicity of an atmosphere, can affect an object's apparent brightness in different bands by up to several magnitudes.

79 ASTRONOMY AND ASTROPHYSICS↗

The atmospheres of Uranus and Neptune

The atmospheres of Uranus and Neptune are discussed in the light of the Voyager 2 flybys of these planets. A basic overview of their atmospheres is presented, with emphasis on thermal structure, composition, energy and opacity sources, cloud structure, and the horizontal structure of the atmospheres. The nature and implications of the different internal heat flows on the two planets, and the implications of the deuterium and helium abundances for the origin and evolution of these ice giants, as distinct from Jupiter and Saturn, are discussed. Selected chemical and physical processes in the atmospheres of Uranus and Neptune are illustrated.

Lunine, Jonathan I.↗

Clouds, aerosols, and photochemistry in the Jovian atmosphere

An assessment is made of the development status of concepts for cloud and aerosol compositions, vertical and horizontal distributions, and microphysical properties, in the Jovian upper troposphere and stratosphere. Attention is given to several key photochemical species' relationships to aerosol formation as well as their transport process implications, treating photochemistry in the context of comparative planetology and noting differences and similarities among the outer planet atmospheres; since this approach emphasizes observational data, a variegated assortment of ground-based and spacecraft observations is assembled. Current views on the tropospheric distribution of clouds are challenged, and a rationale is presented for alternative accounts.

West, R. A.↗

Accurate Density Calculation for Molten Slags in SiO{sub 2}-Al{sub 2}O{sub 3}-CaO-MgO-‘FeO’-‘Fe{sub 2}O{sub 3}’ Systems

A simple and accurate density calculation model for molten slags containing iron oxides in SiO{sub 2}-Al{sub 2}O{sub 3}-CaO-MgO-‘FeO’-‘Fe{sub 2}O{sub 3}’ systems is established in the present study, by extending a previous model developed for SiO{sub 2}-Al{sub 2}O{sub 3}-CaO-MgO systems. To quantitate the iron oxides in slags, a new method is proposed to recalculate all the iron oxides as ‘FeO’ and ‘Fe{sub 2}O{sub 3},’ which represent the iron oxides in equilibrium with metallic iron and the air atmosphere, respectively. This method is essentially different from most of the other models that dealt with ferrous (FeO) and ferric (Fe{sub 2}O{sub 3}) iron oxides. A total of 860 experimental data points for iron oxide-containing melts are critically collected for the optimization of the model parameters. The model achieves an excellent agreement with literature values with an average error of 1.96 pct and an overall absolute error of 0.092 g/cm{sup 3}. The compositional dependences from unary to multicomponent systems are discussed using the present model. The results show that the densities always increase with the increasing ‘FeO’ or ‘Fe{sub 2}O{sub 3},’ and the substitution of ‘FeO’ by ‘Fe{sub 2}O{sub 3}’ will cause a decrease in density. In the multicomponent systems, SiO{sub 2} tends to have a larger impact on the density of ‘Fe{sub 2}O{sub 3}’-containing systems compared with ‘FeO’-containing systems.

36 MATERIALS SCIENCE↗

Comprehensive insights into competitive oxidation/sulfidation reactions on binary ferritic alloys at high temperatures

Interpreting high-temperature corrosion induced by mixed-gas atmospheres is challenging due to the different contributions of oxidizing gases. In this work, a comprehensive study on the combined oxidation/sulfidation using label molecules is presented. Fe-Cr model alloys with 2 wt% and 9 wt% Cr were isothermally exposed using a volumetric mixture of 0.5%S 16 O 2 /27%H 2 18 O and 0.5%S 16 O 2 /7%H 2 18 O at 650 °C for 5 h and then characterized by secondary ion mass spectroscopy (SIMS). Additionally, the reactions were followed in-situ utilizing energy dispersive X-ray diffraction. The study showed that both S 16 O 2 and H 2 18 O contribute to the oxidation of the alloys but to different extents depending on the Cr-content.

36 MATERIALS SCIENCE↗

Combined effects of temperature and precipitation on soil organic carbon changes in the uplands of eastern China

Temperature and precipitation simultaneously influence soil organic carbon (SOC) in agroecosystems. While their individual impacts have been extensively studied, their combined effects remain poorly understood at a regional scale. This study quantified the combined influence of temperature and precipitation on SOC in upland-crop fields of northern Jiangsu Province in eastern China. We used the DeNitrification-DeComposition (DNDC, version 9.5) model with the currently most detailed upland soil database in China. This 1:50,000 soil database contains 17,024 upland soil polygons that were generated using 983 upland soil profiles. Model simulations indicated that under a combined scenario of rising air temperature (T) of 2 °C and a simultaneous decrease (or increase) in precipitation (P) by 20%, the 3.93 Mha of upland soils in the study region sequestered 39.10 (or 37.39) Tg C from 2010-2039. The C sequestration from the combined effects of T and P on SOC was 2.40 (or 2.12) Tg C less, relative to the sum of the amount produced from the individual effect. Moreover, if the increase in T changed from 2 °C to 4 °C, with P still decreasing (or increasing) by 20%, the C sequestration further decreased by 1.2 (or 1.68) Tg C. Our analysis of the combined effects of T and P on SOC changes suggests that future warming and P change in this region may have a negative influence on SOC sequestration, despite the upland agroecosystems serve as a long-term sink for atmospheric CO2. Furthermore, SOC changes in different upland soil groups and administrative areas varied widely due to the heterogeneity in soil properties and fertilizer applications. This emphasizes the importance of detailed soil datasets and the need to adopt on-farm management practices to different soil groups and administrative areas under future climate change.

Zhang, Liming↗

Formation of uranium oxy-carbide and uranium carbide via conversion of polymer covered uranium dioxide by laser-based thermal processing

Conventional formation of carbonaceous uranium compounds requires bulk processing using furnace-based approaches. Here, a methodology employing polymer covered uranium dioxide and laser-based heating is explored to enable rapid, localized formation of carbonaceous uranium compounds. Specifically, heating of poly(methyl methacrylate) covered uranium dioxide powder to high temperatures using laser irradiation in argon and methane gaseous environments was investigated. Decomposition of material and reactions induced by laser irradiation were probed in situ by residual gas analysis using a benchtop mass spectrometer. In this study, to determine the effect on the resultant material phase, three different process parameters were varied: gaseous atmosphere, laser power, and laser irradiation time. Material processed under varying conditions was analyzed using powder X-ray diffraction and scanning electron microscopy. This work realized the conversion of uranium dioxide into uranium oxy-carbide(s) and uranium carbide(s) phases, at over 60 wt.%, via the polymer surface application and laser-based thermal decomposition methodology.

36 MATERIALS SCIENCE↗

Evaluating the Effects of Precipitation and Evapotranspiration on Soil Moisture Variability Within CMIP5 Using SMAP and ERA5 Data

=The effects of precipitation (Pr) and evapotranspiration (ET) on surface soil moisture (SSM) play an essential role in the land-atmosphere system. Here we evaluate multimodel differences of these effects within the Coupled Model Intercomparison Project Phase 5 (CMIP5) compared to Soil Moisture Active Passive (SMAP) products and ECMWF Reanalysis v5 (ERA5) as references in a frequency domain. The variability of SSM, Pr, and ET within three frequency bands (1/7 ~ 1/30 days -1 , 1/30 ~ 1/90 days -1 , and 1/90 ~ 1/365 days -1 ) after normalization is quantified using Fourier transform. We analyze the impact of ET and Pr on SSM variability based on a transfer function assuming that these variables form a linear time-invariant (LTI) system. For the total effects of ET and Pr on SSM variability, the CMIP5 estimations are smaller than the reference data in the two higher frequency bands and are larger than the reference data in the lowest frequency band. Besides, the effects on SSM by Pr and ET are found to be different across the three frequency bands. In each frequency band, the variability of the factor that dominates SSM (i.e., Pr or ET) from CMIP5 is smaller than that from the references. This study identifies the spatiotemporal distribution of differences between CMIP5 models and references (SMAP and ERA5) in simulating ET and Pr effects on SSM within three frequency bands. This study provides insightful information on how soil moisture variability is affected by varying precipitation and evapotranspiration at different time scales within Earth System Models.

54 ENVIRONMENTAL SCIENCES↗

CO{sub 2} Laser Ablation Area Scaling And Redeposition On Flat Polyoxymethylene Targets

One of the remaining unknown subjects of laser propulsion involves whether special benefits or challenges exist for applying laser ablation propulsion to targets with particularly large or small spot areas. This subject is of high importance for a wide range of topics ranging from laser removal of space debris to micropropulsion for laser propulsion vehicles. Analysis is complex since different ablation phenomena are dominant between atmosphere and vacuum conditions. Progress has also been impeded by the difficulty of setting control parameters (particularly fluence) constant while the spot area is adjusted. It is also usually difficult for one group to address small- and large-area effects using a single high-power laser system. Recent collaborative experiments on laser ablation area scaling at several institutions, using 100-J class and 10-J class CO{sub 2} lasers, have advanced the understanding of laser propulsion area scaling. The spot area-dependence of laser propulsion parameters has been investigated over an area range covering approximately 0.05-50 cm{sup 2} at low fluence of about 0.6 J/cm{sup 2}. The experiments were conducted well below the threshold for plasma formation, and provide an estimate of the ablation threshold for CO{sub 2} laser ablation of POM.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Shear flow instability in a partially-ionized plasma sheath around a fast-moving vehicle

The stability of ion acoustic waves in a sheared-flow, partially-ionized compressible plasma sheath around a fast-moving vehicle in the upper atmosphere, is described and evaluated for different flow profiles. In a compressible plasma with shear flow, instability occurs for any velocity profile, not just for profiles with an inflection point. A second-order differential equation for the electrostatic potential of excited ion acoustic waves in the presence of electron and ion collisions with neutrals is derived and solved numerically using a shooting method with boundary conditions appropriate for a finite thickness sheath in contact with the vehicle. We consider three different velocity flow profiles and find that in all cases that neutral collisions can completely suppress the instability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Joule heat generation in thermionic cathodes of high-pressure arc discharges

The nonlinear surface heating model of plasma-cathode interaction in high-pressure arcs is extended to take into account the Joule effect inside the cathode body. Calculation results are given for different modes of current transfer to tungsten cathodes of different configurations in argon plasmas of atmospheric or higher pressures. Special attention is paid to analysis of energy balances of the cathode and the near-cathode plasma layer. In all the cases, the variation of potential inside the cathode is much smaller than the near-cathode voltage drop. However, this variation can be comparable to the volt equivalent of the energy flux from the plasma to the cathode and then the Joule effect is essential. Such is the case of the diffuse and mixed modes on rod cathodes at high currents, where the Joule heating causes a dramatic change of thermal and electrical regimes of the cathode. The Joule heating has virtually no effect over characteristics of spots on rod and infinite planar cathodes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Glass-contact refractory of the nuclear waste vitrification melters in the United States: a review of corrosion data and melter life

The performance of the refractory lining in glass melters used for nuclear waste vitrification is critical to the melter reliability for long-term continuous operation. Monofrax® K-3, a high Cr 2 O 3 fused cast refractory material, has been widely used to build the liners of nuclear waste glass melters in the United States. Corrosion behaviour of Monofrax® K-3 refractory has been evaluated based on crucible-scale testing, inspection of the refractory components following scaled melter testing, and inspections of the Defense Waste Processing Facility (DWPF) melter refractory after service. The literature generally consists of empirical models based on short-term testing to describe refractory corrosion dependence on glass composition. Corrosion data from tests with longer testing times, at various temperatures, in the presence of molten salts, and with different redox reactions in the plenum atmosphere exist, may be insufficient to provide accurate refractory service life estimates. Additionally, the corrosion data collected under actual and scaled melter operating conditions are limited. Recommendations to achieve more direct correlation between the laboratory refractory corrosion data predictions and the observed melter service life are discussed to allow for more accurate predictions of the useful life of melter refractory linings.

Jin, Tongan↗

STUDIES OF MILLIMETER-WAVE ATMOSPHERIC NOISE ABOVE MAUNA KEA

We report measurements of the fluctuations in atmospheric emission (atmospheric noise) above Mauna Kea recorded with Bolocam at 143 and 268 GHz from the Caltech Submillimeter Observatory. The 143 GHz data were collected during a 40 night observing run in late 2003, and the 268 GHz observations were made in early 2004 and early 2005 over a total of 60 nights. Below approx =0.5 Hz, the data time-streams are dominated by atmospheric noise in all observing conditions. The atmospheric noise data are consistent with a Kolmogorov-Taylor turbulence model for a thin wind-driven screen, and the median amplitude of the fluctuations is 280 mK{sup 2} rad{sup -5/3} at 143 GHz and 4000 mK{sup 2} rad{sup -5/3} at 268 GHz. Comparing our results with previous ACBAR data, we find that the normalization of the power spectrum of the atmospheric noise fluctuations is a factor of approx =80 larger above Mauna Kea than above the South Pole at millimeter wavelengths. Most of this difference is due to the fact that the atmosphere above the South Pole is much drier than the atmosphere above Mauna Kea. However, the atmosphere above the South Pole is slightly more stable as well: the fractional fluctuations in the column depth of precipitable water vapor are a factor of approx =sq root2 smaller at the South Pole compared to Mauna Kea. Based on our atmospheric modeling, we developed several algorithms to remove the atmospheric noise, and the best results were achieved when we described the fluctuations using a low-order polynomial in detector position over the 8' field of view. However, even with these algorithms, we were not able to reach photon-background-limited instrument photometer performance at frequencies below approx =0.5 Hz in any observing conditions. We also observed an excess low-frequency noise that is highly correlated between detectors separated by approx<(f/number sign)lambda; this noise appears to be caused by atmospheric fluctuations, but we do not have an adequate model to explain its source. We hypothesize that the correlations arise from the classical coherence of the electromagnetic field across a distance of approx =(f/number sign)lambda on the focal plane.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

CHANDRA PHASE-RESOLVED X-RAY SPECTROSCOPY OF THE CRAB PULSAR

We present a new study of the X-ray spectral properties of the Crab Pulsar. The superb angular resolution of the Chandra X-Ray Observatory enables distinguishing the pulsar from the surrounding nebulosity. Analysis of the spectrum as a function of pulse phase allows the least-biased measure of interstellar X-ray extinction due primarily to photoelectric absorption and secondarily to scattering by dust grains in the direction of the Crab Nebula. We modify previous findings that the line of sight to the Crab is underabundant in oxygen and provide measurements with improved accuracy and less bias. Using the abundances and cross sections from Wilms et al. we find [O/H] = (5.28 {+-} 0.28) Multiplication-Sign 10{sup -4} (4.9 Multiplication-Sign 10{sup -4} is solar abundance). We also measure for the first time the impact of scattering of flux out of the image by interstellar grains. We find {tau}{sub scat} = 0.147 {+-} 0.043. Analysis of the spectrum as a function of pulse phase also measures the X-ray spectral index even at pulse minimum-albeit with increasing statistical uncertainty. The spectral variations are, by and large, consistent with a sinusoidal variation. The only significant variation from the sinusoid occurs over the same phase range as some rather abrupt behavior in the optical polarization magnitude and position angle. We also compare these spectral variations to those observed in gamma-rays and conclude that our measurements are both a challenge and a guide to future modeling and will thus eventually help us understand pair cascade processes in pulsar magnetospheres. The data are also used to set new, and less biased, upper limits to the surface temperature of the neutron star for different models of the neutron star atmosphere. We discuss how such data are best connected to theoretical models of neutron star cooling and neutron star interiors. The data restrict the neutrino emission rate in the pulsar core and the amount of light elements in the heat-blanketing envelope. The observations allow the pulsar, irrespective of the composition of its envelope, to have a neutrino emission rate higher than {approx}0.2 of the standard rate of a non-superfluid star cooling via the modified Urca process. The observations also allow the rate to be lower but now with a limited amount of accreted matter in the envelope.

79 ASTRONOMY AND ASTROPHYSICS↗

NEON AND OXYGEN ABUNDANCES AND ABUNDANCE RATIO IN THE SOLAR CORONA

In this work we determine the Ne/O abundance ratio from Solar and Heliospheric Observatory (SOHO)/Solar Ultraviolet Measurement of Emitted Radiation (SUMER) off-disk observations of quiescent streamers over the 1996-2008 period. We find that the Ne/O ratio is approximately constant over solar cycle 23 from 1996 to 2005, at a value of 0.099 ± 0.017; this value is lower than the transition region determinations from the quiet Sun used to infer the neon photospheric abundance from the oxygen photospheric abundance. Also, the Ne/O ratio we determined from SUMER is in excellent agreement with in situ determinations from ACE/SWICS. In 2005-2008, the Ne/O abundance ratio increased with time and reached 0.25 ± 0.05, following the same trend found in the slowest wind analyzed by ACE/SWICS. Further, we measure the absolute abundance in the corona for both oxygen and neon from the data set of 1996 November 22, obtaining A {sub o} = 8.99 ± 0.04 and A {sub Ne} = 7.92 ± 0.03, and we find that both elements are affected by the first ionization potential (FIP) effect, with oxygen being enhanced by a factor of 1.4-2.1 over its photospheric abundance, and neon being changed by a factor of 0.75-1.20. We conclude that the Ne/O ratio is not constant in the solar atmosphere, both in time and at different heights, and that it cannot be reliably used to infer the neon abundance in the photosphere. Also, we argue that the FIP effect was less effective during the minimum of solar cycle 24, and that the Ne/O = 0.25 ± 0.05 value measured at that time is closer to the true photospheric value, leading to a neon photospheric abundance larger than assumed by ≈40%. We discuss the implications of these results for the solar abundance problem, for the FIP effect, and for the identification of the source regions of the solar wind.

79 ASTRONOMY AND ASTROPHYSICS↗

Large eddy simulations of offshore wind turbine wakes for two floating platform types

The growing prospect for large farms of floating offshore wind turbines requires a better understanding of wake effects for floating turbines. In this work, large eddy simulations with an actuator line model are used to study the wake of the NREL 5 MW reference turbine mounted on the OC3-UMaine spar and OC4-DeepCwind semi-submersible platforms. The simulations are carried out in the Simulator fOr Wind Farm Applications (SOWFA) coupled with OpenFAST for the platform and turbine motion. The wake location, deficit, and turbulence levels are compared for the two floating platforms and equivalent fixed-turbine cases. The effects of neutral versus stable atmospheric conditions are also compared. Most notably, floating-turbine wakes are deflected upwards compared to fixed-turbine wakes, because of mean platform pitch. The spar wake deflects upwards more than the semi-submersible, while the stable atmosphere increases this vertical deflection compared to the neutral. The time-varying rotor motions do not significantly affect the mid-to-far wake, though the stable atmosphere shows larger fixed-floating differences in horizontal wake fluctuations.

17 WIND ENERGY↗

SDO/AIA OBSERVATION OF KELVIN-HELMHOLTZ INSTABILITY IN THE SOLAR CORONA

We present observations of the formation, propagation, and decay of vortex-shaped features in coronal images from the Solar Dynamics Observatory associated with an eruption starting at about 2:30 UT on 2010 April 8. The series of vortices were formed along the interface between an erupting (dimming) region and the surrounding corona. They ranged in size from several to 10 arcsec and traveled along the interface at 6-14 km s{sup -1}. The features were clearly visible in six out of the seven different EUV wave bands of the Atmospheric Imaging Assembly. Based on the structure, formation, propagation, and decay of these features, we identified the event as the first observation of the Kelvin-Helmholtz instability (KHI) in the corona in EUV. The interpretation is supported by linear analysis and by a nonlinear 2.5-dimensional magnetohydrodynamic model of KHI. We conclude that the instability is driven by the velocity shear between the erupting and closed magnetic field of the coronal mass ejection. The shear-flow-driven instability can play an important role in energy transfer processes in coronal plasma.

79 ASTRONOMY AND ASTROPHYSICS↗