Search NASA⌕ Search

SEARCH · Search NASA

Results for “graphitized”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

The morphology, electron structure, and optical properties of self-assembled silicon nanostructures on the surface of highly oriented pyrolytic graphite

The results of studies of the morphology, electronic structure, and optical properties of self-assembled silicon nanostructures on the surface of highly oriented pyrolytic graphite are reported. The structures are fabricated by electron-beam-assisted evaporation in high-vacuum conditions. It is found that, at thicknesses of about one monolayer, the atomic structure of the layer is similar to that of graphene with the interatomic spacing {approx}2.4 A. At film thicknesses larger than one monolayer, clusters about 5 nm in dimensions are formed on the substrate surface.

36 MATERIALS SCIENCE↗

Graphite/p-SiC Schottky Diodes Prepared by Transferring Drawn Graphite Films onto SiC

Graphite/p-SiC Schottky diodes are fabricated using the recently suggested technique of transferring drawn graphite films onto p-SiC single-crystal substrates. The current–voltage and capacitance–voltage characteristics are measured at different temperatures and at different frequencies of a small-signal AC signal, respectively. The temperature dependences of the potential-barrier height and of the series resistance of the graphite/p-SiC junctions are measured and analyzed. The dominant mechanisms of the charge–carrier transport through the diodes are determined. It is shown that the dominant mechanisms of the transport of charge carriers through the graphite/p-Si Schottky diodes at a forward bias are multi-step tunneling recombination and tunneling described by the Newman formula (at high bias voltages). At reverse biases, the dominant mechanisms of charge transport are the Frenkel–Poole emission and tunneling. It is shown that the graphite/p-SiC Schottky diodes can be used as detectors of ultraviolet radiation since they have the open-circuit voltage V{sub oc} = 1.84 V and the short-circuit current density I{sub sc} = 2.9 mA/cm{sup 2} under illumination from a DRL 250-3 mercury–quartz lamp located 3 cm from the sample.

36 MATERIALS SCIENCE↗

Numerical Simulation of the Structure and Mechanical Properties of Silicene Layers on Graphite during the Lithium Ion Motion

The molecular dynamics method is applied to study structural and mechanical effects appearing during the lithium ion motion in a dc electric field along a planar channel formed by perfect silicene sheets and sheets containing vacancy-type defects. Mono-, di-, tri-, and hexavacancies of rather densely and uniformly filled silicene sheets are arranged one above the other on a graphite substrate. The times of Li{sup +} ion passage through silicene channels with various gaps are determined. The construction of Voronoi polyhedra and truncated polyhedrons, whose centers coincide with the moving ion position allowed revealing the structural features inherent to the two-dimensional layered structure. The nature of stresses appearing in silicene sheets most critical to ion motion over the channel is determined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Formation of Ordered Silicon Structures on a Graphite Surface

The possibility of formation of ordered silicon structures, including silicene, on the graphite substrate surface has been studied. The effect of various conditions of depositing silicon atoms on a finite structure has also been studied. The data on the surface morphology has been obtained by atomic force microscopy, and the electronic structure has been studied by Auger electron spectroscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Charge Transfer Processes in a Sodium-Doped Carbon Composite Based on Fullerenes and Thermally Exfoliated Graphite

The results of doping of a carbon composite material, in which fullerenes are located in a conductive matrix based on thermally exfoliated graphite, with a sodium dopant are presented. Charge transfer processes taking place in samples with different initial ratios of components are studied. It turns out that the electrical resistivity of the samples increases with the introduction of sodium and an increase in its content, since the mobility of the main charge carriers, which are holes as in the undoped material, decreases. The concentration of charge carriers in different types of samples varies in both directions and can increase by more than an order of magnitude. It is concluded that Na plays an ambiguous role. It can contribute not only to the generation of free electrons, but also to an additional increase in the concentration of various defects that can generate free holes and can affect, being effective traps and scattering centers, all types of charge carriers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic Properties of Fullerene–Thermally Exfoliated Graphite Composites Doped with Sodium

The magnetic properties (field range H = 0–50 kOe, temperature range T = 3–300 K), and structural features of a sodium-doped carbon composite material based on fullerene C{sub 60} and thermally exfoliated graphite (TEG) are studied. The material is obtained with different ratios of the components by sintering at a pressure of 7 GPa and T = 600°C, at which it is found that significant amorphization of the crystal lattice of the initial C{sub 60} occurs. The dia-, para-, and ferromagnetic components (M{sub D}, M{sub PM}, and M{sub FM}) were separated from the total magnetic moment of the samples under study. It is found that a sodium dopant has no effect on the magnetic properties of the composite. Analysis of the M{sub PM}(H) field dependences by using the Brillouin function for the fullerene-containing sample (i.e., without TEG) makes it possible to determine the quantum number of the total angular momentum of paramagnetic (PM) centers. Its value is found to be J = 1, which corresponds to elementary magnetic moment μ{sub PM} = 2μ{sub B} of a PM center. The concentration of PM centers is estimated at the level of N{sub PM} ≈ (2–5) × 10{sup 18} g{sup –1} for most samples, including the material without TEG. The introduction of TEG into the initial composition and an increase in its proportion in the composite leads to a strong increase in the magnetic moment, which is explained by an increase in both the J value and the concentration of PM centers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Unoccupied Electronic States of the Ultrathin Diphenylphthalide Films on the Surface of the Highly Oriented Pyrolytic Graphite

The results of diagnostics of the atomic composition of a diphenylphthalide (DPP) film thermally precipitated in vacuum by the of X-ray photoelectric spectroscopy (XPS) method are presented. The results of examination of the unoccupied electronic states of the ultrathin DPP films with the thickness up to 10 nm on the surface of the highly oriented pyrolytic graphite (HOPG) by the total current spectroscopy (TCS) method in the energy range from 5 to 20 eV above E{sub F} are presented. In this range, the main maxima in the total current spectra are identified. The analysis of the TCS results with consideration of the theoretical calculation results has shown that the low-energy maxima observed at the energies from 6 to 7.5 eV are induced predominately by π* electron orbitals of DPP films. The values of the energy E{sub vac} in relation to E{sub F}, i.e., of the electron work function in the DPP films at the film thickness of 5–10 nm, are found experimentally at a level of 4.3 ± 0.1 eV. The negative charge transfer from an organic film to the substrate corresponds to the formation of the HOPG/DPP boundary potential barrier during the thermal deposition of the DPP film.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Intercepting Grids Made of Anisotropic Pyrolytic Graphite in Electron Guns with a Dispenser Cathode

The results of experimental studies into the application of anisotropic pyrolytic graphite (APG) as grid structures in power microwave devices with a dispenser cathode are detailed. The dependences of emission characteristics of molybdenum, hafnium, and APG in diodes and electron guns on the electron-flow power dissipated at the studied samples and on cathode temperature are presented. It is demonstrated that the power dissipation capacity of APG grid structures (without parasitic thermionic emission) is up to 20 and 9 times higher than that of molybdenum and hafnium grids, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis of Oxygen-Doped Graphitic Carbon Nitride from Thiourea

We have synthesized oxygen-doped graphite-like carbon nitride (g-C{sub 3}N{sub 4}) by the thermal treatment of the thiourea at 450–550°C. With an increase in the annealing temperature, the oxygen concentration in g-C{sub 3}N{sub 4} increases, and the band-gap of the material decreases from 2.64 to 2.47 eV. The semiconductor properties of g-C{sub 3}N{sub 4} doped with oxygen are confirmed by its high photocatalytic activity, determined by decoloration of a Rhodamine B aqueous solution in the presence of g-C{sub 3}N{sub 4} upon irradiation with visible light.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Direct solar self-catalyzing pyrolysis of natural gas to hydrogen and high-quality graphite (Final Technical Report)

This project, led by researchers at UCLA in partnership with Southwest Solar Technology (SST) and SolGrapH, successfully demonstrated a new method for producing clean hydrogen fuel and high-quality graphite using concentrated solar energy. The primary goal was to develop a technology that converts natural gas (primarily methane) into two valuable products—hydrogen gas and solid carbon—without releasing carbon dioxide (CO2) into the atmosphere. This process, known as solar thermal pyrolysis, uses heat from the sun to split the methane molecules directly.

03 NATURAL GAS↗

Simulations of graphite boronization: A molecular dynamics study of amorphization resulting from bombardment

The molecular dynamics code LAMMPS was used to simulate the bombardment of a graphite structure by atomic boron with impact energies ranging from 50–250 eV. The transient structural evolution, penetration depth, and amorphous layer thickness were analyzed. Simulations show that larger impact energies lead to a greater volume of amorphization and penetration of boron, but that the growth rate of the amorphous layer decreases with increasing fluence. Furthermore, the change in surface chemistry of the amorphized structures was studied using the ReaxFF formalism, which found that the amorphization process introduces dangling bonds thus increasing reactivity in the amorphous region.

74 ATOMIC AND MOLECULAR PHYSICS↗

Direct and Sensitive Electrochemical Evaluation of Pramipexole Using Graphitic Carbon Nitride (gCN) Sensor

Pramipexole (PMXL) belongs to the benzothiazole class of aromatic compounds and is used in treating Parkinson’s disease; however, overdosage leads to some abnormal effects that could trigger severe side effects. Therefore, it demands a sensitive analytical tool for trace level detection. In this work, we successfully developed an electrochemical sensor for the trace level detection of PMXL, using the voltammetric method. For the analysis, graphitic carbon nitride (gCN) was opted and synthesized by using a high-temperature thermal condensation method. The synthesized nanoparticles were employed for surface characterization, using transmission electron microscopy (TEM), X-ray diffraction (XRD), and atomic force microscopy (AFM) techniques. The electrochemical characterization of the material was evaluated by using the electrochemical impedance spectroscopy (EIS) technique to evaluate the solution–electrode interface property. The cyclic voltammetry (CV) behavior of PMXL displayed an anodic peak in the forward scan, indicating that PMXL underwent electrooxidation, and an enhanced detection peak with lower detection potential was achieved for gCN-modified carbon paste electrode (gCN·CPE). The influence of different parameters on the electrochemical behavior was analyzed, revealing the diffusion governing the electrode process with an equal number of hydronium ions and electron involvement. For the fabricated gCN·CPE, good linearity range was noticed from 0.05 to 500 µM, and a lower detection limit (L D ) of 0.012 µM was achieved for the selected concentration range (0.5 to 30 µM). Selectivity of the electrode in PMXL detection was investigated by conducting an interference study, while the tablet sample analysis demonstrates the sensitive and real-time application of the electrode. The good recovery values for the analysis illustrate the efficiency of the electrode for PMXL analysis.

36 MATERIALS SCIENCE↗

Photocatalytic Generation of Singlet Oxygen by Graphitic Carbon Nitride for Antibacterial Applications

Carbon-based functional nanocomposites have emerged as potent antimicrobial agents and can be exploited as a viable option to overcome antibiotic resistance of bacterial strains. In the present study, graphitic carbon nitride nanosheets are prepared by controlled calcination of urea. Spectroscopic measurements show that the nanosheets consist of abundant carbonyl groups and exhibit apparent photocatalytic activity under UV photoirradiation towards the selective production of singlet oxygen. Therefore, the nanosheets can effectively damage the bacterial cell membranes and inhibit the growth of bacterial cells, such as Gram-negative Escherichia coli, as confirmed in photodynamic, fluorescence microscopy, and scanning electron microscopy measurements. The results from this research highlight the unique potential of carbon nitride derivatives as potent antimicrobial agents.

36 MATERIALS SCIENCE↗

Recent Work at Langley Research Center in the Development of a Graphite-Heated Small-Scale Hypersonic Nitrogen Tunnel

It is the purpose of this paper to discuss the development of and to present some preliminary data results which were obtained during the operation of a high-pressure-high-temperature induction-type heat exchanger. The subjects to be covered are: (1) An overall description of the induction heater and the various graphite elements tested in the heater; (2) Effects of the mass rate of flow on stagnation temperature; (3) Heat-transfer data on one heater element; (4) Effect of power input on gas stagnation temperature, and (5) The evaluation of mass flow technique as a method for determining true gas stagnation temperature.

HEAT EXCHANGER↗