Search NASA⌕ Search

SEARCH · Search NASA

Results for “linked data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Hawthorne Nevada Deep Direct-Use Feasibility Study - Data Used for Geothermal Resource Conceptual Modeling and Power Capacity Estimates

This data submission includes several data components that were used to develop a conceptual model and power capacity-estimates of two low-temperature geothermal resources that define geothermal prospect A at Hawthorne, Nevada. Data are sourced from a combination of legacy publicly-available data and more recent data acquisition conducted by the US Navy Geothermal Program Office (2008-2013) and the Great Basin Center for Geothermal Energy at the University of Nevada, Reno (2008-2010). Data sets include compiled fluid geochemistry data, down-hole temperature logs for wells in the vicinity of prospect A, 2 meter temperature survey data, temperature-spinner logs acquired in well HWAAD-2A, fracture picks from image log data acquired in wells HWAAD-2 and HWAAD-3, and X-Ray Diffraction (XRD) analyses on cuttings from wells HWAAD-2A and HWAAD-3. These data have been reviewed for errors and inconsistencies, but it is possible that few errors could still remain. The resource conceptual model and power capacity estimates are included in the final report to the US Department of Energy, and are presented in a manuscript by Ayling and Hinz. A link to the manuscript published in Geothermics is linked below in this submission.

15 GEOTHERMAL ENERGY↗

Scaling function and nucleon momentum distribution

Scaling studies of inclusive quasielastic electron scattering reactions have been used in the past as a basic tool to obtain information on the nucleon momentum distribution in nuclei. However, the connection between the scaling function, extracted from the analysis of cross-section data, and the spectral function only exists assuming very restricted approximations. We revisit the basic expressions involved in scaling studies and how they can be linked to the nucleon momentum distribution. In particular, the analysis applied in the past to the so-called scaling region, that is, negative values of the scaling variable y, is extended here to positive y, as a 'universal' superscaling function has been extracted from the analysis of the separated longitudinal data. This leads to results that clearly differ from those based solely on the negative-y scaling region, providing new information on how the energy and momentum are distributed in the spectral function.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Linking transients to their host galaxies – II. A comparison of host galaxy properties and rate dependencies across supernova types

ABSTRACT We use the latest data set of supernova (SN) host galaxies to investigate how the host properties – stellar mass, star formation rate (SFR), metallicity, absolute magnitude, and colour–differ across SN types, with redshift-driven selection effects controlled. SN Ib and Ic host galaxies, on average, are more massive, metal-rich, and redder than SN II hosts. For subtypes, SN Ibn and Ic-BL have bluer hosts than their normal SN Ib and Ic siblings; SN IIb has consistent host properties with SN Ib, while hosts of SN IIn are more metal-rich than those of SN II. Hydrogen-deficient superluminous SNe feature bluer and lower luminosity hosts than most subtypes of core-collapse supernova (CC SN). Assuming simple proportionality of CC SN rates and host SFRs does not recover the observed mean host properties; either a population of long-lived progenitors or a metallicity-dependent SN production efficiency better reproduces the observed host properties. Assuming the latter case, the rates of SN II are insensitive to host metallicity, but the rates of SN Ib and Ic are substantially enhanced in metal-rich hosts by a factor of $\sim 10$ per dex increase in metallicity. Hosts of SN Ia are diverse in their observed properties; subtypes including SN Ia-91T, Ia-02cx, and Ia-CSM prefer star-forming hosts, while subtypes like SN Ia-91bg and Ca-rich prefer quiescent hosts. The rates of SN Ia-91T, Ia-02cx, and Ia-CSM are closely dependent on, or even proportional to, their host SFRs, indicating relatively short-lived progenitors. Conversely, the rates of SN Ia-91bg and Ca-rich transients are proportional to the total stellar mass, favouring long-lived progenitors.

Qin, Yu-Jing (ORCID:0000000336586026)↗

Using Historical and Experimental Data to Reveal Warming Effects on Ant Assemblages

Historical records of species are compared with current records to elucidate effects of recent climate change. However, confounding variables such as succession, land-use change, and species invasions make it difficult to demonstrate a causal link between changes in biota and changes in climate. Experiments that manipulate temperature can overcome this issue of attribution, but long-term impacts of warming are difficult to test directly. Here we combine historical and experimental data to explore effects of warming on ant assemblages in southeastern US. Observational data span a 35-year period (1976–2011), during which mean annual temperatures had an increasing trend. Mean summer temperatures in 2010–2011 were ~2.7°C warmer than in 1976. Experimental data come from an ongoing study in the same region, for which temperatures have been increased ~1.5–5.5°C above ambient from 2010 to 2012. Ant species richness and evenness decreased with warming under natural but not experimental warming. These discrepancies could have resulted from differences in timescales of warming, abiotic or biotic factors, or initial species pools. Species turnover tended to increase with temperature in observational and experimental datasets. At the species level, the observational and experimental datasets had four species in common, two of which exhibited consistent patterns between datasets. With natural and experimental warming, collections of the numerically dominant, thermophilic species, Crematogaster lineolata, increased roughly two-fold. Myrmecina americana, a relatively heat intolerant species, decreased with temperature in natural and experimental warming. In contrast, species in the Solenopsis molesta group did not show consistent responses to warming, and Temenothorax pergandei was rare across temperatures. Our results highlight the difficulty of interpreting community responses to warming based on historical records or experiments alone. Because some species showed consistent responses to warming based on thermal tolerances, understanding functional traits may prove useful in explaining responses of species to warming.

59 BASIC BIOLOGICAL SCIENCES↗

Structural and biophysical analysis of a Haemophilus influenzae tripartite ATP-independent periplasmic (TRAP) transporter

Tripartite ATP-independent periplasmic (TRAP) transporters are secondary-active transporters that receive their substrates via a soluble-binding protein to move bioorganic acids across bacterial or archaeal cell membranes. Recent cryo-electron microscopy (cryo-EM) structures of TRAP transporters provide a broad framework to understand how they work, but the mechanistic details of transport are not yet defined. Here we report the cryo-EM structure of the Haemophilus influenzae N-acetylneuraminate TRAP transporter (HiSiaQM) at 2.99 Å resolution (extending to 2.2 Å at the core), revealing new features. The improved resolution (the previous HiSiaQM structure is 4.7 Å resolution) permits accurate assignment of two Na + sites and the architecture of the substrate-binding site, consistent with mutagenic and functional data. Moreover, rather than a monomer, the HiSiaQM structure is a homodimer. We observe lipids at the dimer interface, as well as a lipid trapped within the fusion that links the SiaQ and SiaM subunits. We show that the affinity (K D ) for the complex between the soluble HiSiaP protein and HiSiaQM is in the micromolar range and that a related SiaP can bind HiSiaQM. This work provides key data that enhances our understanding of the ‘elevator-with-an-operator’ mechanism of TRAP transporters.

59 BASIC BIOLOGICAL SCIENCES↗

Visual Analytics of Heterogeneous Data Using Hypergraph Learning

For real-world learning tasks (e.g., classification), graph-based models are commonly used to fuse the information distributed in diverse data sources, which can be heterogeneous, redundant, and incomplete. Thesemodels represent the relations in different datasets as pairwise links. However, these links cannot deal with high-order relations which connect multiple objects (e.g., in public health datasets, more than two patient groups admitted by the same hospital in 2014). In this article, we propose a visual analytics approach forthe classification on heterogeneous datasets using the hypergraph model. The hypergraph is an extension to traditional graphs in which a hyperedge connects multiple vertices instead of just two. We model various high-order relations in heterogeneous datasets as hyperedges and fuse different datasets with a unified hypergraph structure. We use the hypergraph learning algorithm for predicting missing labels in the datasets.To allow users to inject their domain knowledge into the model-learning process, we augment the traditional learning algorithm in a number of ways. In addition, we also propose a set of visualizations which enable the user to construct the hypergraph structure and the parameters of the learning model interactively during the analysis. Here, we demonstrate the capability of our approach via two real-world cases.

97 MATHEMATICS AND COMPUTING↗

Sample Identifiers and Metadata to Support Data Management and Reuse in Multidisciplinary Ecosystem Sciences

Physical samples are foundational entities for research across biological, Earth, and environmental sciences. Data generated from sample-based analyses are not only the basis of individual studies, but can also be integrated with other data to answer new and broader-scale questions. Ecosystem studies increasingly rely on multidisciplinary team-science to study climate and environmental changes. While there are widely adopted conventions within certain domains to describe sample data, these have gaps when applied in a multidisciplinary context. In this study, we reviewed existing practices for identifying, characterizing, and linking related environmental samples. We then tested practicalities of assigning persistent identifiers to samples, with standardized metadata, in a pilot field test involving eight United States Department of Energy projects. Participants collected a variety of sample types, with analyses conducted across multiple facilities. We address terminology gaps for multidisciplinary research and make recommendations for assigning identifiers and metadata that supports sample tracking, integration, and reuse. Furthermore, our goal is to provide a practical approach to sample management, geared towards ecosystem scientists who contribute and reuse sample data.

54 ENVIRONMENTAL SCIENCES↗

Kinetics Data of Iron(II), Manganese(II), Dissolved Organic Carbon and Nitrate from Batch Incubation Experiments Using Hyporheic Sediments from the East River Watershed, Colorado.

Hyporheic zones act as critical ecological links between terrestrial and aquatic systems where redox-sensitive metals of iron (Fe) and manganese (Mn) significantly impact nutrient cycling and water quality. In order to understand the production, release and speciation of Fe(II) and Mn(II) in groundwater, we conducted batch incubation experiments using sediment samples from a hyporheic zone of the East River floodplain in Colorado. The East River is part of the Watershed Function Scientific Focus Area (WFSFA) located in the Upper Colorado River Basin, United States. Collection and processing of the data is described in the Methods, along with details of data file contents. There are 6 data files provided in two formats: 1 zip-folder of .csv (open source) files, and 1 zip-folder of .xlsx (Excel) files. The data tables provided in the two formats are the exact same.

54 ENVIRONMENTAL SCIENCES↗

INTREPID program: technology and architecture for next-generation, energy-efficient, hyper-scale data centers [Invited]

The INTREPID program is developing power-efficient coherent optics for package-level integration with future switch integrated circuits as a path to realizing higher-radix switches for flatter networks. The link architecture is underpinned by coherent quadrature phase-shift keying (QPSK) polarization-multiplex transceivers at 200 Gb/s per λ <#comment/> , further enhanced with wavelength division multiplexing (WDM) to enable energy-efficient 800 or 1600 Gb/s inter-switch fiber connections. The technology is compatible with conventional three-level data center designs as well as a two-level data center design introduced here, which includes an added layer of passive, arrayed waveguide grating routers (AWGRs) or WDM circuit switches to further improve the cost, energy efficiency, and latency of the network.

Saleh, Adel A. M. (ORCID:0000000182451136)↗

Profiling optimization for big data transfer over dedicated channels

The transfer of big data is increasingly supported by dedicated channels in high-performance networks, where transport protocols play an important role in maximizing applicationlevel throughput and link utilization. The performance of transport protocols largely depend on their control parameter settings, but it is prohibitively time consuming to conduct an exhaustive search in a large parameter space to find the best set of parameter values. We propose FastProf, a stochastic approximation-based transport profiler, to quickly determine the optimal operational zone of a given data transfer protocol/method over dedicated channels. We implement and test the proposed method using both emulations based on real-life performance measurements and experiments over physical connections with short (2 ms) and long (380 ms) delays. Both the emulation and experimental results show that FastProf significantly reduces the profiling overhead while achieving a comparable level of end-to-end throughput performance with the exhaustive search-based approach.

Yun, D.↗

Extending cost–benefit analysis for the sustainability impact of inter-urban Intelligent Transport Systems

The paper reports research involving three cost–benefit analyses performed on different ITS schemes (Active Traffic Management, Intelligent Speed Adaptation and the Automated Highway System) on one of the UK's busiest highways — the M42. The environmental scope of the assets involved is widened to take into account the possibility of new technology linked by ICT and located within multiple spatial regions. The areas focused on in the study were data centre energy emissions, the embedded emissions of the road-side infrastructure, vehicle tailpipe emissions, additional hardware required by the vehicles (if applicable) and safety, and all aspects of sustainability. Dual discounting is applied which aims to provide a separate discount rate for environmental elements. For ATM, despite the energy costs of the data centre, the initial implementation costs and mitigation costs of its embedded emissions, a high cost–benefit ratio of 5.89 is achieved, although the scheme becomes less effective later on its lifecycle due to rising costs of energy. ISA and AHS generate a negative result, mainly due to the cost of getting the vehicle on the road. In order to negate these costs, the pricing of the vehicle should be scaled depending upon the technology that is outfitted. Retrofitting on vehicles without the technology should be paid for by the driver. ATM will offset greenhouse gas emissions by 99 kt of CO{sub 2} equivalency over a 25 year lifespan. This reduction has taken into account the expected improvement in vehicle technology. AHS is anticipated to save 280 kt of CO{sub 2} equivalency over 15 years of operational usage. However, this offset is largely dependent on assumptions such as the level of market penetration. - Highlights: • Three cost–benefit analyses are applied to inter-urban intelligent transport. • For ATM, a high cost–benefit ratio of 5.89 is achieved. • ATM offsets greenhouse gas emissions by 99 kt of CO{sub 2} equivalency over 25 years. • ISA and AHS generate a negative result due to vehicle implementation costs. • AHS is anticipated to save 280 kt of CO{sub 2} equivalency over 15 years.

54 ENVIRONMENTAL SCIENCES↗

A review on the fatigue behavior of Ti-6Al-4V fabricated by electron beam melting additive manufacturing

Electron beam melting (EBM) is a swiftyly-developing metal additive manufacturing process that holds significant interest in the aerospace and biomedical industries for the high-strength titanium alloy, Ti-6Al-4V. These industries have fatigue-limited applications, yet a lack of understanding of the EBM process-microstructure-fatigue relationships limit widespread use and presents challenges for certification. In this review, uniaxial fatigue data was collected and the effects of build orientation, surface roughness, and hot-isostatic pressing are linked to the fatigue properties highlighting microstructure, defects, and failure mechanisms. The observations and conclusions are supported by statistical analysis using the mean fatigue life obtained by the Statistical Fatigue-Limit Model. Both EBM-process and post-process structure relationships are discussed in order to identify the best-practice for fatigue-resistant design. The performance of the EBM material is compared to conventionally manufactured Ti-6Al-4V and possible methods to increase the fatigue resistance are discussed. Anisotropic fatigue behavior was observed in as-fabricated parts and no statistical distinction was found in the fatigue performance of HIPed and as-fabricated material provided the same as-fabricated rough surface condition. However, comparable fatigue life to traditionally manufactured lamellar Ti-6Al-4V is achieved when both post-process HIP and machining are applied to EBM-fabricated parts.

36 MATERIALS SCIENCE↗

Numerical Analysis of the Dynamics of Two- and Three-Dimensional Fluidized Bed Reactors using an Euler-Lagrange Approach

Biomass thermochemical conversion, often done in fluidized beds, recently gained a lot of attention due to its potential to efficiently produce renewable liquid fuels. Optimization of reactor design and operating conditions, however, requires a fundamental understanding of bed dynamics. In this work, a numerical framework based on an Euler-Lagrange approach is developed and used to perform and analyze large-scale simulations of two- and three-dimensional periodic fluidized beds. Collisions are handled using a soft-sphere model. An efficient parallel implementation allows one to explicitly track over 30 million particles, which is representative of the number of particles found in lab-scale reactor, therefore demonstrating the capability of Lagrangian approaches to simulate realistic systems at that scale. An on-the-fly bubble identification and tracking algorithm is used to characterize bubble dynamics for inlet velocities up to 9 times the minimum fluidization velocity. Statistics for gas volume fraction, gas and particle velocities, bed expansion, and bubble size and velocity, is compared across the two- and three-dimensional configurations, and comparison with literature data generally shows good agreement. The wide distribution of gas residence times observed in the simulations is linked to the different gas hold-up characteristics of the gas-solid system.

09 BIOMASS FUELS↗

Roles of miR-204 in retinal development and maintenance

Highlights: • miR-204 plays an important role in the development, maintenance, and diseases of the retina. • Various layers of the retina including RPE express miR-204. • Retinoblastoma, age-related macular degeneration, glaucoma and optic nerve injury are among the most common retinopathies caused by miR-204 dysfunction. • miR-204 target genes are involved in diverse signaling pathways crucial for retinal physiology. The retina is the innermost part of the eye of most vertebrates and it is essential for vision. The development, maintenance, and function of this laminated structure is tightly regulated by numerous genes. Deficiencies in the expression of these genes as well as deregulation of various molecular mechanisms can cause retinopathies and blindness. MicroRNAs (miRNAs) are one of the most important and effective molecular regulatory mechanisms that underlie the biology of the retina. miRNAs have specific functional roles in the development and maintenance of different retinal layers and retinal cell types. While previous studies have reported a large number of miRNAs linked to development, maintenance and diseases of the retina, no comprehensive study has properly discussed and integrated data from these studies. Given the particular importance of miR-204 in retinal biology, we intend to critically discuss the expression and functional significance of this miRNA in the development, maintenance, and pathologies of the retina. Moreover, we explore biological processes through which miR-204 influences retinal pathophysiology. This review highlights the crucial functions of miR-204 in the retina and suggests the putative mechanism of miR-204 action in retinal biology.

60 APPLIED LIFE SCIENCES↗

In Silico Guidance for In Vitro Androgen and Glucocorticoid Receptor ToxCast Assays

Molecular initiating events (MIEs) are key events in adverse outcome pathways (AOPs) that link molecular chemistry to target biology. As they are based in chemistry, these interactions are excellent targets for computational chemistry approaches to in silico modelling. In this work, we aim to link ligand chemical structure to MIEs for androgen receptor (AR) and glucocorticoid receptor (GR) binding using ToxCast data. This has been done using an automated computational algorithm to perform maximal common substructure searches on chemical binders for each target from the ToxCast dataset. The models developed show a high level of accuracy, correctly assigning 87.20% of AR binders and 96.81% of GR binders in a 25% test set using holdout cross-validation. The 2D structural alerts developed can be used as in silico models to predict these MIEs, and as guidance for in vitro ToxCast assays to confirm hits. These models can target such experimental work, reducing the number of assays to be performed to gain required toxicological insight. Development of these models has also allowed some structural alerts to be identified as predictors for agonist or antagonist behavior at the receptor target. This work represents a first step in using computational methods to guide and target experimental approaches.

Allen, Timothy H.↗

Bioactivity Profiling of Chemical Mixtures for Hazard Characterization

Abstract The assessment and regulation of chemical toxicity to protect human health and the environment are done one chemical at a time and seldom at environmentally relevant concentrations. However, chemicals are found in the environment as mixtures, and their toxicity is largely unknown. Understanding the hazard posed by chemicals within the mixture is critical to enforce protective measures. Here, we demonstrate the application of bioactivity profiling of environmental water samples using the sentinel and ecotoxicology model species Daphnia to reveal the biomolecular response induced by exposure to real-world mixtures. We exposed a Daphnia strain to 30 sampled waters of the Chaobai River and measured the gene expression response profiles. Using a multiblock correlation analysis, we establish correlations between chemical mixtures identified in 30 water samples with gene expression patterns induced by these chemical mixtures. We identified 80 metabolic pathways putatively activated by mixtures of inorganic ions, heavy metals, polycyclic aromatic hydrocarbons, industrial chemicals, and a set of biocides, pesticides, and pharmacologically active substances. Our data-driven approach discovered both known bioactivity signatures with previously described modes of action and new pathways linked to undiscovered potential hazards. This study demonstrates the feasibility of reducing the complexity of real-world mixture toxicity to characterize the biomolecular effects of a defined number of chemical components based on gene expression monitoring of the sentinel species Daphnia.

Engineering↗

10 ps resolution, 160 ns full scale range and less than 1.5% differential non-linearity time-to-digital converter module for high performance timing measurements

We present a compact high performance time-to-digital converter (TDC) module that provides 10 ps timing resolution, 160 ns dynamic range and a differential non-linearity better than 1.5% LSB{sub rms}. The TDC can be operated either as a general-purpose time-interval measurement device, when receiving external START and STOP pulses, or in photon-timing mode, when employing the on-chip SPAD (single photon avalanche diode) detector for detecting photons and time-tagging them. The instrument precision is 15 ps{sub rms} (i.e., 36 ps{sub FWHM}) and in photon timing mode it is still better than 70 ps{sub FWHM}. The USB link to the remote PC allows the easy setting of measurement parameters, the fast download of acquired data, and their visualization and storing via an user-friendly software interface. The module proves to be the best candidate for a wide variety of applications such as: fluorescence lifetime imaging, time-of-flight ranging measurements, time-resolved positron emission tomography, single-molecule spectroscopy, fluorescence correlation spectroscopy, diffuse optical tomography, optical time-domain reflectometry, quantum optics, etc.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

BODIPY star-shaped molecules as solid state colour converters for visible light communications

In this paper, we study a family of solid-state, organic semiconductors for visible light communications. The star-shaped molecules have a boron-dipyrromethene (BODIPY) core with a range of side arm lengths which control the photophysical properties. The molecules emit red light with photoluminescence quantum yields ranging from 22% to 56%. Thin films of the most promising BODIPY molecules were used as a red colour converter for visible light communications. The film enabled colour conversion with a modulation bandwidth of 73 MHz, which is 16 times higher than that of a typical phosphor used in LED lighting systems. A data rate of 370 Mbit/s was demonstrated using On-Off keying modulation in a free space link with a distance of ∼15 cm.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗