Search NASA⌕ Search

SEARCH · Search NASA

Results for “mass diffusivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Diffusion-limited relic particle production

We examine the thermal evolution of particle number densities in the early universe when the particles have a finite diffusion length. Assuming that annihilations are impossible when the mean separation of the particles is larger than their diffusion length, we derive a version of the Boltzmann equation for freeze out in this scenario and an approximate solution, accurate to better than 2%. The effect of a finite diffusion length is to increase the final relic freeze-out abundance over its corresponding value when diffusion effects are ignored. When diffusion is limited only by scattering off of the thermal background, and the annihilation cross section is bounded by unitarity, a significant effect on the freeze-out abundance requires a scattering cross section much larger than the annihilation cross section. A similar effect is demonstrated when the relic particles are produced via the freeze-in mechanism, but in this case the finite diffusion length is due to the scattering of particles that annihilate into the relic particle of interest. For freeze in, the effect of a finite diffusion length is to reduce the final relic particle abundance. The effects of a finite diffusion length are most important when the scattering cross section or the relic mass are very large. While we have not found a particularly compelling example where this would affect previous results, with the current interest in new dark matter candidates it could become an important consideration.

79 ASTRONOMY AND ASTROPHYSICS↗

Challenges of Vapor Diffusion $Nb_3Sn$ Coating at Fermilab: Minimizing Impurities Using TOF-SIMS

Nb$_3$Sn demonstrates steady advancements nowadays offering reduced power cost in superconducting radio-frequency cavities due to its high critical temperature, quality factor, and achieved accelerating gradient. However, theoretical estimates of its radio-frequency parameters have not been achieved due to several potentially limiting mechanisms: tin spots, patchy regions, defects, thermal impedance, and impurities. While some of these limitations have been intensively studied, impurity analysis in Nb$_3$Sn coatings have received less attention. We report an investigation of impurities in several vapor-diffused Nb$_3$Snn coated samples using time-of-flight secondary ion mass spectroscopy (TOF-SIMS) and show allowable impurity levels in view of superconducting cavity performance. Challenges and lessons learned in maintaining clean Nb$_3$Sn coatings are also discussed.

Tagdulang, N. [Fermilab]↗

Chemical Mixing Induced by Internal Gravity Waves in Intermediate-mass Stars

Internal gravity waves can cause mixing in the radiative interiors of stars. We study this mixing by introducing tracer particles into 2D hydrodynamic simulations. Following the work of Rogers & McElwaine, we extend our study to different masses (3, 7, and 20 M ⊙ ) and ages (ZAMS, midMS, and TAMS). The diffusion profiles of these models are influenced by various parameters such as the Brunt–Väisälä frequency, density, thermal damping, the geometric effect, and the frequencies of waves contributing to these mixing profiles. We find that the mixing profile changes dramatically across age. In younger stars, we noted that the diffusion coefficient increases toward the surface, whereas in older stars the initial increase in the diffusion profile is followed by a decreasing trend. We also find that mixing is stronger in more massive stars. Hence, future stellar evolution models should include this variation. In order to aid the inclusion of this mixing in 1D stellar evolution models, we determine the dominant waves contributing to these mixing profiles and present a prescription that can be included in 1D models.

79 ASTRONOMY AND ASTROPHYSICS↗

The clouds of Venus. II - An investigation of the influence of coagulation on the observed droplet size distribution

An approximate numerical technique is used to investigate the influence of coagulation, sedimentation and turbulent motions on the observed droplet size distribution in the upper layers of the Venus clouds. If the cloud mass mixing ratio is less than 0.000001 at 250 K or the eddy diffusivity throughout the cloud is greater than 1,000,000 sq cm per sec, then coagulation is unimportant. In this case, the observed droplet size distribution is the initial size distribution produced by the condensation of the droplets. It is found that all cloud models with droplet formation near the cloud top (e.g., a photochemical model) must produce the observed droplet size distribution by condensation without subsequent modification by coagulation. However, neither meteoritic or surface dust can supply sufficient nucleating particles to account for the observed droplet number density. If the cloud droplets are formed near the cloud bottom, the observed droplet size distribution can be produced solely by the interaction of coagulation and dynamics; all information about the initial size distribution is lost. If droplet formation occurs near the cloud bottom, the lower atmosphere of Venus is oxidizing rather than reducing.

Rossow, W. B.↗

Distribution of energetic positive ion species above a diffuse midnight aurora

The present paper deals with species-identifying distribution function measurements of auroral primary particles, made during a magnetically quiet presubstorm period above a hydrogen-associated diffuse aurora. Only ions identified as H(+) and He(++) were detected. In the mass spectrum data, the He(++) was not clearly above background. At energies between 2.5 and 12 keV, the He(++)/H(+) intensity ratio had an upper limit of 2 to 4 percent. The same upper limit applies to all other ions, such as He(+) and O(+). Though this would suggest a solar wind source for these ions, an admixture including an appreciable fraction of polar wind protons is not precluded. This situation contrasts sharply with a number of recently reported observations of large intensities of precipitating O(+) ions during magnetic storms, and may be characteristic of undisturbed periods.

Moore, T. E.↗

On the absence of convective stability in materials preparation on earth

The yield in the production and the performance of electronic and optical solid state devices is frequently limited by nonuniformities in the composition and structure of the underlying crystalline material. The formation of such inhomogeneities can be favored by convective heat and mass transfer during the preparation. Hence, it is often desirable to establish purely diffusive conditions in materials preparation. It has been thought that buoyancy-driven convection can be readily excluded by appropriate orientation of the density gradient with respect to the gravity vector. Such expectations overlook, however, that materials preparation processes are inherently associated with multidimensional density gradients. Hence, it is concluded, there will always be convective contributions to transport in materials processing on earth.

Rosenberger, Franz↗

Boundary layer effects on particle impaction and capture

The inertial impaction and deposition of small particles on larger bodies with viscous boundary layers are considered theoretically, in a detailed comment on a paper by Menguturk et al. (1983). Topics addressed include cushion effects, the dimensionless groups corresponding to the diameter range (3-6 microns) examined by Menguturk et al. in a numerical example, analogous effects of particle-gas energy and mass exchange in boundary layers, and the combined effects of particle inertia and diffusion. It is argued that the inertial effects can be characterized in terms of a body, boundary-layer, or sublayer Stokes number. In a reply by Menguturk et al., the focus is on the application of the theoretical model to the erosion of blade surfaces in large gas turbines; the Stokes number is found to be of limited practical value in these cases, because the particle motion is not primarily normal to the blade surfaces.

Rosner, D. E.↗

Laser diagnostics for microgravity droplet studies

Rapid advances have recently been made in numerical simulation of droplet combustion under microgravity conditions, while experimental capabilities remain relatively primitive. Calculations can now provide detailed information on mass and energy transport, complex gas-phase chemistry, multi-component molecular diffusion, surface evaporation and heterogeneous reaction, which provides a clearer picture of both quasi-steady as well as dynamic behavior of droplet combustion. Experiments concerning these phenomena typically result in pictures of the burning droplets, and the data therefrom describe droplet surface regression along with flame and soot shell position. With much more precise, detailed, experimental diagnostics, significant gains could be made on the dynamics and flame structural changes which occur during droplet combustion. Since microgravity experiments become increasingly more expensive as they progress from drop towers and flights to spaceborne experiments, there is a great need to maximize the information content from these experiments. Sophisticated measurements using laser diagnostics on individual droplets and combustion phenomena are now possible. These include measuring flow patterns and temperature fields within droplets, vaporization rates and vaporization enhancement, radical species profiling in flames and gas-phase flow-tagging velocimetry. Although these measurements are sophisticated, they have undergone maturation to the degree where with some development, they are applicable to studies of microgravity droplet combustion. This program beginning in September of 1992, will include a series of measurements in the NASA Learjet, KC-135 and Drop Tower facilities for investigating the range of applicability of these diagnostics while generating and providing fundamental data to ongoing NASA research programs in this area. This program is being conducted in collaboration with other microgravity investigators and is aimed toward supplementing their experimental efforts.

Winter, Michael↗

Diffusion effects on the helium abundance of the solar transition region and corona

The diffusion of helium in the solar transition region is studied by solving the mass and momentum conservation equations for a hydrogen-helium plasma given a representative temperature profile. Steady state solutions show that two distinct atmospheres may result. In cases where the thermal force on alpha-particles is balanced by the partial pressure gradient force, helium is the dominant coronal species. On the other hand, if it is the frictional force between protons and alpha-particles which balances the thermal force on alpha-particles then hydrogen is the major coronal component. In order to explore which of these solutions are attainable within reasonable time scales, the time-dependent equations are solved, starting from an initial state with a uniform helium abundance of 10 percent. The atmosphere as a whole is close to hydrostatic equilibrium, but due the thermal forces the individual elements are not. This force inbalance leads to a differential flow between species. It is found that this differential flow leads to a significant enhancement of the coronal helium abundance. Even for the relatively shallow temperature gradient used the helium abundance in the lower corona increases to 30 percent over a 24 hr period.

Hansteen, Viggo H.↗

Theory and Experiments on Supersonic Air-to-Air Ejectors.

A comparison of experiment with theory is made for air ejectors having cylindrical mixing sections and operating under conditions of supersonic primary flow and either mixed or supersonic regimes of mixing. The effect on ejector performance of such parameters as mixer length and cross section, terminating diffuser, primary Mach number, and primary nozzle position is presented in terms of mass flow and pressure ratio.

Fabri, J↗

A Model For The Burning of Teflon

Teflon has been identified as suitable material for use in oxygen-enriched atmospheres because of its low specific enthalpy of combustion that is, less than 1500 cal/gram. However, once ignited, Teflon burns in a heterogeneous reaction until total consumption or depletion of oxygen occurs. A model is developed for the burning of Teflon in pure, high-pressure oxygen, 3.4 to 68.9 MPa. The Teflon polymer chain dissociates via monomer units due to pyrolysis. These monomer units diffuse to the surface due to free convection. The model consists of coupled mass and energy balances for the polymer and an energy balance for the free convection of product gases. The model is used to obtain appropriate kinetic parameters for the dissociation and surface reactions. The model is validated against experimental measurements of Teflon discs supported on aluminum rods (2216) at oxygen pressures of 3.4, 6.8, 34.4, and 68.9 MPa. The model simulates the temperature distribution in the product gases above burning Teflon.

Waller, Jess M.↗

Accretion-Driven Sources in Spatially Resolved Lyα Emitters

Lyα emission is a standard tracer of starburst galaxies at high redshift. However, a number of local Lyα emitters (LAEs) are X-ray sources, suggesting a possible origin of Lyα photons other than young, hot stars, and which may be active at much later ages relative to the parent starburst. Resolved, nearby LAEs offer the opportunity to discriminate between diffuse X-ray emission arising from supernova-heated gas, high-mass X-ray binaries (HMXBs), or low-luminosity active galactic nuclei (LLAGN). We examine archival X-ray imaging from Chandra and XMM-Newton for 11 galaxies with spatially resolved Lyα imaging to determine the luminosity, morphology, and spectral hardness of the X-ray sources. The data are consistent with 9 of the 12, bright Lyα sources being driven by luminous, >1040 erg s-1 X-ray sources. Half of the eight Chandra sources are unresolved. The data suggest that nuclear activity, whether from LLAGN or nuclear starbursts, may play an important role in Lyα emission. Our results also suggest a significant link between Lyα emission and HMXBs, ultraluminous X-ray sources, and/or LLAGN, which would imply that Lyα may be generated over timescales 1–2 orders of magnitude longer than produced by photoionization from OB stars. This highlights a critical need to quantify the relative contributions of different sources across cosmic time, to interpret Lyα observations and the resulting properties of distant galaxies.

Benjamin Dittenber↗

A new approach to enforcing discrete maximum principles in continuous Galerkin methods for convection-dominated transport equations

This work introduces a set of design principles and new algorithmic tools for enforcing maximum principles and/or positivity preservation in continuous finite element approximations to convection-dominated transport problems. Enabling a linear first-order advection equation as a model problem, we address the design of first-order artificial diffusion operators and their higherorder counterparts at the element matrix level. The proposed methodology leads to a nonlinear high-resolution scheme capable of resolving moving fronts and internal/boundary layers as sharp localized nonoscillatory features. The amount of numerical dissipation depends on the difference between the solution value at a given node and a local maximum or minimum. The shockcapturing numerical diffusion coefficient is designed to vanish as the nodal values approach a mass-weighted or linearity-preserving average. The universal applicability and simplicity of the element-based limiting procedure makes it an attractive alternative to edge-based algebraic flux correction.

Kuzmin, D.↗

Shape effect on drying behavior of cement-based materials: Mechanisms and numerical analysis

The shape of the specimen or structure has a direct impact on the behavior of drying concrete. This effect is not taken into account in most of shrinkage models and codes. Only the current B4 model and its previous version B3 model incorporate a shape factor. The determination of this coefficient is based on the nonlinear moisture diffusion analysis, which can explain the shape effect on the shrinkage rate. However, the model integrates this coefficient in the ultimate shrinkage values as well. An experimental study has been performed to confirm and understand this behavior. The mass loss and drying shrinkage of cylinders showed higher rate and ultimate values than the prisms, for the same effective cross section thickness. To explain this result, the drying, the differential shrinkage, the internal stress and the damaged depth were determined for both shapes through numerical modeling. The main input data of the model were the measured mass loss and shrinkage. The calculated desorption isotherm curve of the cylinder was below that of the prism, which is consistent with its higher ultimate mass-loss. The determination of stress profiles indicates slower stress mitigation for the cylinder. The cylinder develops a larger relative damaged area, defined as the part of the specimen where cracking is likely to occur due to tensile stresses. The results actually show that differential shrinkage between the edge and the core is more pronounced for the cylinder and decreases with time.

36 MATERIALS SCIENCE↗

(Almost) Dark Galaxies in the ALFALFA Survey: Isolated H i-bearing Ultra-diffuse Galaxies

Here, we present a sample of 115 very low optical surface brightness, highly extended, H i-rich galaxies carefully selected from the ALFALFA survey that have similar optical absolute magnitudes, surface brightnesses, and radii to recently discovered "ultra-diffuse" galaxies (UDGs). However, these systems are bluer and have more irregular morphologies than other UDGs, are isolated, and contain significant reservoirs of H i. We find that while these sources have normal star formation rates for H i-selected galaxies of similar stellar mass, they have very low star formation efficiencies. We further present deep optical and H i-synthesis follow-up imaging of three of these H i-bearing ultra-diffuse sources. We measure H i diameters extending to ~40 kpc, but note that while all three sources have large H i diameters for their stellar mass, they are consistent with the H i mass–H i radius relation. We further analyze the H i velocity widths and rotation velocities for the unresolved and resolved sources, respectively, and find that the sources appear to inhabit halos of dwarf galaxies. Finally, we estimate spin parameters, and suggest that these sources may exist in high spin parameter halos, and as such may be potential H i-rich progenitors to the ultra-diffuse galaxies observed in cluster environments.

79 ASTRONOMY AND ASTROPHYSICS↗

Opposing flow in square porous annulus: Influence of Dufour effect

Heat and mass transfer in porous medium is very important area of research which is also termed as double diffusive convection or thermo-solutal convection. The buoyancy ratio which is the ratio of thermal to concentration buoyancy can have negative values thus leading to opposing flow. This article is aimed to study the influence of Dufour effect on the opposing flow in a square porous annulus. The partial differential equations that govern the heat and mass transfer behavior inside porous medium are solved using finite element method. A three node triangular element is used to divide the porous domain into smaller elements. Results are presented with respect to geometric and physical parameters such as duct diameter ratio, Rayleigh number, radiation parameter etc. It is found that the heat transfer increase with increase in Rayleigh number and radiation parameter. It is observed that Dufour coefficient has more influence on velocity profile.

42 ENGINEERING↗

Solar wind sputtering effects in the atmospheres of Mars and Venus

It is found through an investigation, combining Monte Carlo simulations and analytical techniques, of the direct collisional interaction of an energetic particle flux with the neutral components of a planetary atmosphere, that solar wind sputtering could provide an important exospheric mass sink on both Mars and Venus under appropriate conditions. The computed rates of helium loss in the Venusian atmosphere and of carbon, nitrogen and oxygen in the Martian atmosphere imply that sputtering would have a significant effect on the noble gas budget of Venus and dominate the chemical and photochemical loss processes of Mars. Because of diffusive separation of lighter elements and isotopes, and because the gravitational binding energy is proportional to the mass, the erosion process preferentially removes the lighter components of the atmosphere. Solar wind sputtering could therefore compete with other erosion mechanisms in generating substantial fractionation effects.

Watson, C. C.↗

INFALLING–ROTATING MOTION AND ASSOCIATED CHEMICAL CHANGE IN THE ENVELOPE OF IRAS 16293–2422 SOURCE A STUDIED WITH ALMA

We have analyzed rotational spectral line emission of OCS, CH{sub 3}OH, HCOOCH{sub 3}, and H{sub 2}CS observed toward the low-mass Class 0 protostellar source IRAS 16293–2422 Source A at a sub-arcsecond resolution (∼0.″6 × 0.″5) with ALMA. Significant chemical differentiation is found on a scale of 50 au. The OCS line is found to trace well the infalling–rotating envelope in this source. On the other hand, the distributions of CH{sub 3}OH and HCOOCH{sub 3} are found to be concentrated around the inner part of the infalling–rotating envelope. With a simple ballistic model of the infalling–rotating envelope, the radius of the centrifugal barrier (a half of the centrifugal radius) and the protostellar mass are evaluated from the OCS data to be from 40 to 60 au and from 0.5 to 1.0 M {sub ⊙}, respectively, assuming the inclination angle of the envelope/disk structure to be 60° (90° for the edge-on configuration). Although the protostellar mass is correlated with the inclination angle, the radius of the centrifugal barrier is not. This is the first indication of the centrifugal barrier of the infalling–rotating envelope in a hot corino source. CH{sub 3}OH and HCOOCH{sub 3} may be liberated from ice mantles by weak accretion shocks around the centrifugal barrier and/or by protostellar heating. The H{sub 2}CS emission seems to come from the disk component inside the centrifugal barrier in addition to the envelope component. The centrifugal barrier plays a central role not only in the formation of a rotationally supported disk but also in the chemical evolution from the envelope to the protoplanetary disk.

79 ASTRONOMY AND ASTROPHYSICS↗