Search NASA⌕ Search

SEARCH · Search NASA

Results for “program understanding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Blowing Snow Over the Antarctic Plateau

Studies of blowing snow over Antarctica have been limited greatly by the remoteness and harsh conditions of the region. Space-based observations are also of lesser value than elsewhere, given the similarities between ice clouds and snow-covered surfaces, both at infrared and visible wavelengths. It is only in recent years that routine ground-based observation programs have acquired sufficient data to overcome the gap in our understanding of surface blowing snow. In this paper, observations of blowing snow from visual observers' records as well as ground-based spectral and lidar programs at South Pole station are analyzed to obtain the first climatology of blowing snow over the Antarctic plateau. Occurrence frequencies, correlation with wind direction and speed, typical layer heights, as well as optical depths are determined. Blowing snow is seen in roughly one third of the visual observations and occurs under a narrow range of wind directions. The near-surface layers typically a few hundred meters thick emit radiances similar to those from thin clouds. Because blowing snow remains close to the surface and is frequently present, it will produce small biases in space-borne altimetry; these must be properly estimated and corrected.

Mahesh, Ashwin↗

Program Plan for 2005: NASA Scientific and Technical Information Program

Throughout 2005 and beyond, NASA will be faced with great challenges and even greater opportunities. Following a period of reevaluation, reinvention, and transformation, we will move rapidly forward to leverage new partnerships, approaches, and technologies that will enhance the way we do business. NASA's Scientific and Technical Information (STI) Program, which functions under the auspices of the Agency's Chief Information Officer (CIO), is an integral part of NASA's future. The program supports the Agency's missions to communicate scientific knowledge and understanding and to help transfer NASA's research and development (R&D) information to the aerospace and academic communities and to the public. The STI Program helps ensure that the Agency will remain at the leading edge of R&D by quickly and efficiently capturing and sharing NASA and worldwide STI to use for problem solving, awareness, and knowledge management and transfer.

NASA programs↗

NASA/GE quiet engine C acoustic test results

The acoustic investigation and evaluation of the C propulsion turbofan engine are discussed. The engine was built as a part of the Quiet Engine Program. The objectives of the program are as follows: (1) to determine the noise levels produced turbofan bypass engines, (2) to demonstrate the technology and innovations which will reduce the production and radiation of noise in turbofan engines, and (3) to acquire experimental acoustic and aerodynamic data for high bypass turbofan engines to provide a better understanding of noise production mechanisms. The goals of the program called for a turbofan engine 15 to 20 PNdB quieter than currently available engines in the same thrust class.

Kazin, S. B.↗

We Just Want to Pump…You Up! Forecasting Grid-Connected Heat Pump Water Heater Energy Savings and Load Shifting Potential for the Southeast U.S.

Heat pump water heaters (HPWH) can achieve energy savings of 60-70% compared to conventional electric-resistance water heaters. However, even with a favorable simple payback period within the typical product lifetime, HPWHs make up only 1% of all electric water heaters sold in the residential sector. Market adoption is challenged, in part, by the lack of effective energy efficiency programs in the U.S. region with the greatest amount of residential electric water heaters. The recent integration of connected functionality into HPWHs offers the capability to shift load without undue negative impact on customers. This capability can provide value to utilities with peak load constraints, motivating them to promote HPWHs for the first time. This paper will present a methodology to forecast connected HPWH energy use and extrapolate load shifting potential for the Southeast U.S. region. The methodology leverages data from a robust connected HPWH field study conducted in the Pacific Northwest. A coefficient of performance (COP) relationship for HPWHs was developed using ambient and inlet water temperature data to forecast HPWH performance on a month-by-month basis. Using the forecasted COP, HPWH operating hours were calculated for meeting load, which serve as the proxy to extrapolate load shifting potential from the Pacific Northwest to the Southeast. As a use case, analytical results are presented for a specific utility. This methodology, in combination with market analysis, facilitates the development of customized energy savings and load shifting forecasts to understand the potential impacts of launching connected HPWH programs in specific utility service territories.

heat pump water heater, energy savings, load shift↗

Icing Research Tunnel

The Icing Research Tunnel in Building 11 at the NASA Glenn Research Center is committed to researching the effects of in flight icing on aircraft and testing ways to stop the formation of hazardous icing conditions on planes. During this summer, I worked here with Richard DelRosa, the lead engineer for this area. address one of the major concerns of aviation: icing conditions. During the war, many planes crashed (especially supply planes going over the.Himalayas) because ice built up in their wings and clogged the engines. To this day, it remains the largest ice tunnel in the world, with a test section that measures 6 feet high, 9 feet long, and 20 feet wide. It can simulate airspeeds from 50 to 300 miles per hour at temperatures as low as -50 Fahrenheit. Using these capabilities, IRT can simulate actual conditions at high altitudes. The first thing I did was creating a cross reference in Microsoft Excel. It lists commands for the DPU units that control the pressure and temperature variations in the tunnel, as well as the type of command (keyboard, multiplier, divide, etc). The cross reference also contains the algorithm for every command, and which page it is listed in on the control sheet (visual Auto-CAD graphs, which I helped to make). I actually spent most of the time on the computer using Auto-CAD. I drew a diagram of the entire icing tunnel and then drew diagrams of its various parts. Between my mentor and me, we have drawings of every part of it, from the spray bars to the thermocouples, power cabinets, input-output connectors for power systems, and layouts of various other machines. I was also responsible for drawing schematics for the Escort system (which controls the spray bars), the power system, DPUs, and other electrical systems. In my spare time, I am attempting to build and program the "toddler". Toddler is a walking robot that I have to program in PBASIC language. When complete, it should be able to walk on level terrain while avoiding obstacles in real-time. It features an infrared detector that can keep it from falling over edges, as well as follow or avoid a light source. The toddler is giving me a much better understanding of the basics of electronic circuitry and computer programming.

Chennault, Jonathan↗

Compartment Fire Modeling of a Crew Cabin in 1-g and Lunar-g

A fire inside a spacecraft poses one of the greatest dangers to the crew and mission success. As missions become more complex and longer in duration, the risk of a fire becomes more probable and catastrophic. A greater understanding of the effects of a fire inside a crewed vehicle at potential exploration atmospheres is needed. These exploration atmospheres, such as those being proposed for upcoming Lunar missions, include higher oxygen concentrations and lower pressures, also known as Normoxic conditions. Full scale fire testing, such as those performed during previous space programs, is the most straightforward way to obtain this understanding. These tests are difficult to implement in 1-g and even more challenging to attempt in Lunar-g. Modeling can help inform experiments aimed at determining flammability properties of common materials at exploration atmospheres, as well as determine the effect a fire has inside a spacecraft. A model can also be easily simulated in Lunar-g to predict the effect of gravity on fire propagation. This work focuses on a model of a theoretical partial crew cabin, with potential fire sources being a laptop and a Nomex sleeping bag. A simulation of the crew cabin during a high Heat Release Rate (HRR) fire and low HRR fire at 1-g was compared to simulations at Lunar-g. It was found that in both the low and high HRR cases, the temperature in the cabin was higher in the Lunar-g case than in the 1-g case. This is likely due to the hot products moving out the door of the crew cabin faster in the 1-g case. Modeling case studies like these will help guide future full-scale flammability experiments on Earth and allow for the prediction of fire spread in a Lunar gravity environment in order to design a safer crew cabin.

Fire Safety↗

Small engine technology programs

Small engine technology programs being conducted at the NASA Lewis Research Center are described. Small gas turbine research is aimed at general aviation, commutercraft, rotorcraft, and cruise missile applications. The Rotary Engine Program is aimed at supplying fuel flexible, fuel efficient technology to the general aviation industry, but also has applications to other missions. There is a strong element of synergism between the various programs in several respects. All of the programs are aimed towards highly efficient engine cycles, very efficient components, and the use of high temperature structural ceramics. This research tends to be generic in nature and has broad applications. The Heavy Duty Diesel Transport (HDTT), rotary technology, and the compound cycle programs are all examining approached to minimum heat rejection, or adiabatic systems employing advanced materials. The Automotive Gas Turbine (AGT) program is also directed towards ceramics application to gas turbine hot section components. Turbomachinery advances in the gas turbines will benefit advanced turbochargers and turbocompounders for the intermittent combustion systems, and the fundamental understandings and analytical codes developed in the research and technology programs will be directly applicable to the system projects.

Niedzwiecki, Richard W.↗

Subscale Test Program for the Orion Conical Ribbon Drogue Parachute

A subscale wind tunnel test program for Orion's conical ribbon drogue parachute is under development. The desired goals of the program are to quantify aerodynamic performance of the parachute in the wake of the entry vehicle, including understanding of the coupling of the parachute and command module dynamics, and an improved understanding of the load distribution within the textile elements of the parachute. The test program is ten percent of full scale conducted in a 3x2.1 m (10x7 ft) closed loop subsonic wind tunnel. The subscale test program is uniquely suited to probing the aerodynamic and structural environment in both a quantitative and qualitative manner. Non-intrusive diagnostics, including Particle Image Velocimetry for wake velocity surveys, high speed pressure transducers for canopy pressure distribution, and a high speed photogrammetric reconstruction, will be used to quantify the parachute's performance.

parachute↗

DSN RFI susceptibility models development program overview

The RFI model development described intended to provide an understanding of the interference susceptibility of DSN receivers. An overview of interference types and effects, analytic modelling and experimental verification is presented.

Sue, M. K.↗

Space Technology Mission Directorate - Game Changing Development Program: FY22 Dust Mitigation Standards Annual Review Presentation

Develop an accessible, understandable, comprehensive, and refereed guide to avoiding lunar dust problems during surface operations, both for inexperienced mechanisms designers in academia or small companies *and* for seasoned mission veterans. Extensive references into the detailed technical literature provide a “how to” lunar dust mitigation reference.

Dust Mitigation↗

LuNaMaps FY 2024 Annual Program Review

The LuNaMaps project seeks to advance mapping capabilities and understanding in preparation for lunar landing scenarios. In this presentation we outline the advancements made by the team over the last year.

stereophotogrammetry↗

2012 Gordon Research Conference on Defects in Semiconductors - Formal Schedule and Speaker/Poster Program

The meeting shall strive to develop and further the fundamental understanding of defects and their roles in the structural, electronic, optical, and magnetic properties of bulk, thin film, and nanoscale semiconductors and device structures. Point and extended defects will be addressed in a broad range of electronic materials of particular current interest, including wide bandgap semiconductors, metal-oxides, carbon-based semiconductors (e.g., diamond, graphene, etc.), organic semiconductors, photovoltaic/solar cell materials, and others of similar interest. This interest includes novel defect detection/imaging techniques and advanced defect computational methods.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Risk Informed Philosophy: Using What We Fear to Lose to Guide Us to Success

When an organization sets out on a new effort, program, or project, one of the first steps undertaken is to understand the related requirements. Most often, these requirements come in the form of standards, directives, or other organizational processes, and are derived to meet a broad range of efforts, programs, and projects. The net result is that organizations or teams are forced to start with a maximum set of requirements and expend time and energy tailoring the set of requirements down to what is more appropriate for the effort, program, or project at hand. This presentation will present an alternate method for the application of requirements or best practices that is based upon the actual risks to the safety, performance, or success of the effort. This additive route for applying best practices and requirements also encourages an early exploration of the risks, thus yielding a better understanding of where resources should be applied. This presentation also extends this concept of risk-based application of best practices and requirements to the selection of organization-wide improvement or standardization efforts, such as Lean, Six Sigma, and Quality Management Systems.

Darpel, Scott↗

Solar Energy Technical Publications Catalog: Solar Thermal Technology

The research and development described in these documents was conducted within the U.S . Department of Energy's (DOE) Solar Thermal Technology Program. The goal of this program is to advance the engineering and scientific understanding of solar thermal technology and to establish the technology base from which private industry can develop solar thermal power production options for introduction into the competitive energy market. Solar thermal technology concentrates the solar flux using tracking mirrors or lenses onto a receiver where the solar energy is absorbed as heat and converted into electricity or incorporated into products as process heat. The two primary solar thermal technologies, central receivers and distributed receivers, employ various point and line-focus optics to concentrate sunlight. Current central receiver systems use fields of heliostats (two-axis tracking mirrors) to focus the sun's radiant energy onto a single, tower- mounted receiver. Point focus concentrators up to 17 meters in diameter track the sun in two axes and use parabolic dish mirrors or Fresnel lenses to focus radiant energy onto a receiver. Troughs and bowls are line-focus tracking reflectors that concentrate sunlight onto receiver tubes along their focal lines. Concentrating collector modules can be used alone or in a multimodule system. The concentrated radiant energy absorbed by the solar thermal receiver is transported to the conversion process by a circulating work fluid. Receiver temperatures range from l00 degrees C in low-temperature troughs to over 1500 degrees C in dish and central receiver systems. The Solar Thermal Technology Program is directing efforts to advance and improve each system concept through solar thermal materials, components, and subsystems research and development and by testing and evaluation. These efforts are carried out with the technical direction of DOE and its network of field laboratories that works with private industry. Together they have established a comprehensive, goal-directed program to improve performance and provide technically proven options for eventual incorporation into the nation's energy supply. To successfully contribute to an adequate energy supply at reasonable cost, solar thermal energy must be economically competitive with a variety of other energy sources. The Solar Thermal Technology Program has developed components and system-level performance targets as quantitative program goals. These targets are used in planning research and development activities, measuring progress, assessing alternative technology options, and developing optimal components. These targets are pursued vigorously to ensure a successful program. This catalog represents part of an effort to provide information on publications about solar thermal research and development activities conducted by DOE's laboratories. Publications listed include technical and research reports and special publications. The following national laboratories are represented in this edition: Sandia National Laboratories, Solar Energy Research Institute, Jet Propulsion Laboratory. This catalog is a product of the DOE Solar Technical Information Program, which is dedicated to providing information to scientific and industrial users in ways most convenient and useful to them. This catalog focuses on solar thermal technologies, and its purpose is to keep the scientific and industrial communities informed of the latest developments in federally sponsored research in this technology.

140000* -- Solar Energy↗

Science and the Constellation Systems Program Office

An underlying tension has existed throughout the history of NASA between the human spaceflight programs and the external scientific constituencies of the robotic exploration programs. The large human space projects have been perceived as squandering resources that might otherwise be utilized for scientific discoveries. In particular, the history of the relationship of science to the International Space Station Program has not been a happy one. The leadership of the Constellation Program Office, created in NASA in October, 2005, asked me to serve on the Program Manager s staff as a liaison to the science community. Through the creation of my position, the Program Manager wanted to communicate and elucidate decisions inside the program to the scientific community and, conversely, ensure that the community had a voice at the highest levels within the program. Almost all of my technical contributions at NASA, dating back to the Apollo Program, has been within the auspices of what is now known as the Science Mission Directorate. However, working at the Johnson Space Center, where human spaceflight is the principal activity, has given me a good deal of incidental contact and some more direct exposure through management positions to the structures and culture of human spaceflight programs. I entered the Constellation family somewhat naive but not uninformed. In addition to my background in NASA science, I have also written extensively over the past 25 years on the topic of human exploration of the Moon and Mars. (See, for example, Mendell, 1985). I have found that my scientific colleagues generally have little understanding of the structure and processes of a NASA program office; and many of them do not recognize the name, Constellation. In many respects, the international ILEWG community is better informed. Nevertheless, some NASA decision processes on the role of science, particularly with respect to the formulation of a lunar surface architecture, are not well known, even in ILEWG. At the recent annual Lunar and Planetary Science Conference, I reviewed the evolution of the program as a function of Agency leadership and the constraints put on NASA by the President in his 2004 announcement. I plan to continue my long-time ILEWG tradition of reporting a personal view of the state of development of human exploration of the solar system, this time coming from within the program office tasked to implement the vision for the United States. The current NASA implementation of the Vision for Space Exploration is consistent with certain classical scenarios that have been discussed extensively in the literature. I will discuss the role of science within the Vision, both from official policy and from a de facto interaction. While science goals are not officially driving the implementation of the Vision, the tools of scientific exploration are integral to defining the extraterrestrial design environments. In this respect the sharing of results from international missions to the Moon can make significant contributions to the success of the future human activities.

Mendell, Wendell↗

Methods for Quantitative Interpretation of Retarding Field Analyzer Data

Over the course of the CesrTA program at Cornell, over 30 Retarding Field Analyzers (RFAs) have been installed in the CESR storage ring, and a great deal of data has been taken with them. These devices measure the local electron cloud density and energy distribution, and can be used to evaluate the efficacy of different cloud mitigation techniques. Obtaining a quantitative understanding of RFA data requires use of cloud simulation programs, as well as a detailed model of the detector itself. In a drift region, the RFA can be modeled by postprocessing the output of a simulation code, and one can obtain best fit values for important simulation parameters with a chi-square minimization method.

43 PARTICLE ACCELERATORS↗

A Tutorial for Using an Open-Source Solver for the Regional Energy Deployment System (ReEDS) Model

ReEDS is a publicly available model developed at NREL that can be used to analyze the potential evolution of the U.S. electric power system into the future. ReEDS is formulated as a linear program, written in GAMS, and solved using a linear programming solver (e.g., CPLEX). This tutorial provides context and understanding for the implications of using an open-source solver for ReEDS.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Chemical Safety and Security Education in ACS-Approved Chemistry Programs

To date, chemical security education practices in postsecondary institutions are poorly understood. The purpose of this study is to provide an initial understanding of the practices, attitudes, and barriers toward chemical security education for undergraduate and graduate programs in the United States (US) by surveying representatives of American Chemical Society (ACS)-approved programs. All programs with ACS-approved undergraduate chemistry programs (n = 691) were contacted for participation: 21% (n = 148) fully completed and 6% (n = 41) partially completed the survey for a combined total of 27% complete and/or partially complete surveys (n = 189). We observed that most programs currently teach chemical safety (undergraduate >99%, graduate 73%); however, only about one-third of programs teach chemical security at any education level (undergraduate 32%, graduate 34%). We also observed that safety education is provided more frequently than security education. Further, ACS-approved programs reported that their chemical safety culture was stronger than chemical security culture and felt that safety should be taught differently than security. The overwhelming majority of respondents (96%) indicated that chemical safety should be mandatory at some level, while only about half of respondents (57%) indicated that chemical security should be mandatory at some level. More efforts are needed by the chemistry community to raise awareness of the importance of chemical security education so that more institutions commit to training their faculty and students on the topic. The authors suggest that adoption of chemical security education could be increased if ACS were to advocate for chemical security by including it in its guidelines for educational program approval.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗