Search NASA⌕ Search

SEARCH · Search NASA

Results for “sample activation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Characterization of novel blast-furnace slag cement pastes and mortars activated with a reactive mixture of MgO-NaOH

This paper reports results of strength and reaction products of blast-furnace slag cements activated using a mixture of MgO-NaOH with a ratio 50/50 incorporated at 4, 6 and 8% relative to the slag mass. Pastes and mortars were prepared and cured at 20 °C and 60 °C-24 h-20 °C up to 90 days. The results indicated that the combination of MgO-NaOH acts as an effective alkaline activator of the slag, as samples cured at 20 °C developed 54 MPa at 90 days, while those at 60 °C-24 h-20 °C had a rapid strength gain at early ages but in the long run strengths of ~42 MPa at 90 days were observed. The microstructures consisted of (C-(A)-S-H), third aluminate hydrates and hydrotalcite. The formation of the latter increased at higher MgO:NaOH concentration lowering the Al uptake by C-S-H. MgO and Mg(OH){sub 2} were not detected, indicating an effective incorporation of Mg{sup 2+} ions into the atomic structure of the reaction products.

36 MATERIALS SCIENCE↗

Electron Spin Resonance (ESR) for the study of Reactive Oxygen Species (ROS) on the isolated frog skin (Pelophylax bergeri): A non-invasive method for environmental monitoring

Highlights: • ROS levels in frog skin biopsy were determined by spin-trapping ESR spectroscopy. • Skin of frogs collected in polluted areas contains higher ROS concentration. • ROS levels determined in skin biopsy follow the same trend of those from liver samples. • Immunohistochemical analyses and enzymatic activity tests validate the method. • ROS concentration determined by ESR in biosentinel biopsy is an effective biomarker. Reactive oxygen species (ROS) in biological tissues of elected biosentinels represent an optimal biomarker for eco-monitoring of polluted areas. Electron spin resonance (ESR) is the most definitive method for detecting, quantifying and possibly identifying radicals in complex systems.

54 ENVIRONMENTAL SCIENCES↗

Enhanced photocatalytic hydrogen evolution activity of CuInS{sub 2} loaded TiO{sub 2} under solar light irradiation

In this paper, p–n type CuInS{sub 2}/TiO{sub 2} particles were prepared in ethylenediamine by the solvothermal method. The microstructural properties of the synthesized p–n type catalysts were characterized by X-ray diffraction (XRD) in order to confirm the existence of crystalline CuInS{sub 2} on the surface of TiO{sub 2}, which was also confirmed by X-ray photoelectron spectroscopy (XPS). Transmission electron microscopy (TEM) images provided the detailed morphological properties about the CuInS{sub 2}/TiO{sub 2} heterostructure. UV–vis diffuse reflectance spectroscopy (UV–vis DRS) was used to investigate the optical properties of the CuInS{sub 2}/TiO{sub 2} particles. The DRS results indicated that both the p–n type structure and CuInS{sub 2} acting as a sensitizer can enhance significantly the absorption of UV and visible light. The photocatalytic activities of the CuInS{sub 2}/TiO{sub 2} particles were evaluated by hydrogen evolution reactions using Xe-lamp irradiation as a simulated solar light source. The greatly enhanced photocatalytic activity of hydrogen evolution under simulated solar light is about ~7 fold higher than that of pure commercial TiO{sub 2} (Degussa P25). - Graphical abstract: The heterojunction structure of CuInS{sub 2}/TiO{sub 2} promoted the efficiency of photoinduced charge carrier transfer and highly inherited the recombination of activated electrons and holes. - Highlight: • CuInS{sub 2}/TiO{sub 2} was prepared by a one-step solvothermal method. • 2.5% CuInS{sub 2}/TiO{sub 2} has the highest activity and keeps the activity stable. • Heterojunction structure of sample promoted the separation of electrons and holes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study of the R-(Zr,W)-(O,N) (R = Y, Nd, Sm, Gd, Yb) oxynitride system

The replacement of tantalum by the couple Zr/W within the RTa-O-N systems (R = Y, Nd, Sm, Gd, Yb), enables the preparation of novel oxide and oxynitride phases in the R-Zr-W-O-N system. R{sub 2}Zr{sub 2-x}W{sub x}O{sub 7+x} oxides exhibit the fluorite-type (x < 0.9) and scheelite (x {approx} 1) structures. Corresponding oxynitride compositions are of the fluorite-type and show different colors, for example in the case of ytterbium: pale yellow (x = 0.2 or 0.25), green (x = 0.5-0.8) and brown for the tungsten-rich samples (x = 0.9, 1). Photocatalytic activity measurements have been performed to investigate the overall water splitting behavior of these colored phases.

36 MATERIALS SCIENCE↗

Preparation, characterization and photocatalytic property of nanosized K-Ta mixed oxides via a sol-gel method

Pyrochlore-type K{sub 2}Ta{sub 2}O{sub 6} compound cannot be obtained by a conventional solid-state reaction. Here, we report the synthesis of K{sub 2}Ta{sub 2}O{sub 6} and tetragonal tungsten bronze (TTB)-type K{sub 6}Ta{sub 10.8}O{sub 30} nanopowders using a facile and low-cost sol-gel method at low temperature. The as-prepared samples were characterized by XRD, TG-DSC, FESEM, UV-vis diffuse reflectance spectrum and XPS. The compound K{sub 2}Ta{sub 2}O{sub 6} was formed at 700 {sup o}C and reached complete crystallization at 750 {sup o}C, and decomposed into pure K{sub 6}Ta{sub 10.8}O{sub 30} with the volatilization of K{sub 2}O at 900 {sup o}C. The transformation of K{sub 2}Ta{sub 2}O{sub 6} to K{sub 6}Ta{sub 10.8}O{sub 30} is reported for the first time. The band gap of the pure K{sub 2}Ta{sub 2}O{sub 6} and K{sub 6}Ta{sub 10.8}O{sub 30} samples was found to be about 4.16 and 3.63 eV, respectively. The as-prepared K{sub 2}Ta{sub 2}O{sub 6} sample exhibited an efficient photocatalytic activity for the decomposition of azo dye acid red G (ARG) and 4-nitrophenol (4-NP, a typical persistent organic pollutant) solution under UV irradiation. According to the experimental results, the mechanism of the photocatalytic reaction over K{sub 2}Ta{sub 2}O{sub 6} was discussed.

36 MATERIALS SCIENCE↗

Influence of rare earth ion (Y{sup 3+}) on the magnetic and dc electrical properties of high density nanocrystalline Mg-Cd ferrites

Graphical abstract: Display Omitted Highlights: ► XRD confirm biphasic nature. ► Grain and crystallite are reduced as compared to ceramic method. ► The resistivity and magnetization increases with Y{sup 3+} addition in Mg-Cd ferrites. ► Coercivity and saturation magnetization shows size dependent behavior. -- Abstract: The samples having general formula Mg{sub 1−x}Cd{sub x}Fe{sub 2}O{sub 4} (x = 0, 0.2, 0.4, 0.6, 0.8 and 1) with 5% Y{sup 3+} addition were prepared by oxalate co-precipitation technique. The characterization was carried by XRD, SEM and FTIR techniques. The XRD confirms the cubic spinel structure with orthoferrite (YFe{sub 2}O{sub 3}) secondary phase. Average crystallite size and grain size lies in the range (28.86–32.66 nm and 0.37–0.69 μm). The grain size is calculated by linear intercept method and lies in the range of 0.37–0.69 μm. The FT-IR shows two absorption bands in the frequency range of 350–800 cm{sup −1}. The addition of Y{sup 3+} for Fe{sup 3+} forms a secondary phase on the grain boundaries and increases the saturation magnetization with respect to that of pure Mg-Cd ferrites. The saturation magnetization, magnetic moment and coercive field is found to increase with cadmium content up to x = 0.4, obeying Neel's two sublattice model and decrease thereafter showing existence of non-collinear spin interaction. The saturation magnetization and coercivity shows size dependent behavior. Y–K type ordering is present in all samples except x = 1. The DC electrical resistivity increases while the Curie temperature (T{sub c}) decreases, with increase in cadmium content. The DC resistivity of Y{sup 3+} added Mg-Cd ferrite is higher than that reported for pure samples and for ceramic method. Activation energy in paramagnetic region is higher than that in ferromagnetic region.

36 MATERIALS SCIENCE↗

Room-temperature solid state synthesis of ZnO/Bi{sub 2}O{sub 3} heterojunction and their solar light photocatalytic performance

Highlights: • ZnO/Bi{sub 2}O{sub 3} hierarchical nanostructures were synthesized via a solid-state reaction. • The amount of Bi{sub 2}O{sub 3} plays an important role in controlling the morphology. • The amount of Bi{sub 2}O{sub 3} plays an important role in controlling the photocatalysis. - Abstract: ZnO/Bi{sub 2}O{sub 3} heterojunction was prepared by solid state reaction method at room temperature. The as-prepared nanostructures were characterized as the assembled nanosheets of ZnO on which Bi{sub 2}O{sub 3} nanoparticles were well dispersed. Further studies revealed that the morphology and photocatalytic property could be regulated by tuning the amount of Bi{sub 2}O{sub 3}. The introduction of Bi{sub 2}O{sub 3} can lead to the enhancement of solar light absorption, and the 5% ZnO/Bi{sub 2}O{sub 3} samples exhibited the best photocatalytic activity under the solar light irradiation. The excellent photocatalytic performances could be ascribed to the synergistic effects of the hierarchical nanostructures and the effective separation of photogenerated carriers. Moreover, the hydroxyl radicals (·OH) are found to be the main active species generated in the oxidation reaction of RhB over ZnO/Bi{sub 2}O{sub 3} photocatalyst. Therefore, our work demonstrated a facile way to prepare hierarchical nanostructures with excellent photocatalytic performance using solid state method at room temperature.

36 MATERIALS SCIENCE↗

Mesoporous palladium–copper ferrites as highly efficient and magnetically separable catalysts for Suzuki coupling reaction

Highlights: • Mesoporous Cu–Pd ferrites were prepared by a facile, mild and environment-friendly route. • The catalysts have shown great efficiencies in Suzuki coupling reaction and up to 36.9 × 10{sup 3} h{sup −1} TOF can be obtained. • The catalyst can be magnetically separated easily and have shown prominent recyclability. - Abstract: Mesoporous Cu–Pd ferrites were prepared by using MCM-41 and SBA-15 mesoporous molecular sieves as hard templates and well characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), ICP-atomic emission spectroscopy, N{sub 2} adsorption–desorption and X-ray photoelectric spectroscopy (XPS). Compared with samples prepared by the sol–gel auto-combustion methods, the as-prepared mesoporous ferrites have shown uniform pore size and much higher specific surface areas. The samples showed a remarkably high activity in connection with the Suzuki coupling reaction, especially Cu{sub 0.99}Pd{sub 0.01}Fe{sub 2}O{sub 4} prepared by using MCM-41 as template obtained an excellent TOF as high as 36.9 × 10{sup 3} h{sup −1} and no obvious decrease in the activity was observed after ten consecutive runs.

36 MATERIALS SCIENCE↗

Characterization of Used Nuclear Fuel with Multivariate Analysis for Process Monitoring

The Multi-Isotope Process (MIP) Monitor combines gamma spectroscopy and multivariate analysis to detect anomalies in various process streams in a nuclear fuel reprocessing system. Measured spectra are compared to models of nominal behavior at each measurement location to detect unexpected changes in system behavior. In order to improve the accuracy and specificity of process monitoring, fuel characterization may be used to more accurately train subsequent models in a full analysis scheme. This paper presents initial development of a reactor-type classifier that is used to select a reactor-specific partial least squares model to predict fuel burnup. Nuclide activities for prototypic used fuel samples were generated in ORIGEN-ARP and used to investigate techniques to characterize used nuclear fuel in terms of reactor type (pressurized or boiling water reactor) and burnup. A variety of reactor type classification algorithms, including k-nearest neighbors, linear and quadratic discriminant analyses, and support vector machines, were evaluated to differentiate used fuel from pressurized and boiling water reactors. Then, reactor type-specific partial least squares models were developed to predict the burnup of the fuel. Using these reactor type-specific models instead of a model trained for all light water reactors improved the accuracy of burnup predictions. The developed classification and prediction models were combined and applied to a large dataset that included eight fuel assembly designs, two of which were not used in training the models, and spanned the range of the initial 235U enrichment, cooling time, and burnup values expected of future commercial used fuel for reprocessing. Error rates were consistent across the range of considered enrichment, cooling time, and burnup values. Average absolute relative errors in burnup predictions for validation data both within and outside the training space were 0.0574% and 0.0597%, respectively. The errors seen in this work are artificially low, because the models were trained, optimized, and tested on simulated, noise-free data. However, these results indicate that the developed models may generalize well to new data and that the proposed approach constitutes a viable first step in developing a fuel characterization algorithm based on gamma spectra.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Low-reactive circulating fluidized bed combustion (CFBC) fly ashes as source material for geopolymer synthesis

In this contribution, low-reactive circulating fluidized bed combustion (CFBC) fly ashes (CFAs) have firstly been utilized as a source material for geopolymer synthesis. An alkali fusion process was employed to promote the dissolution of Si and Al species from the CFAs, and thus to enhance the reactivity of the ashes. A high-reactive metakaolin (MK) was also used to consume the excess alkali needed for the fusion. Reactivities of the CFAs and MK were examined by a series of dissolution tests in sodium hydroxide solutions. Geopolymer samples were prepared by alkali activation of the source materials using a sodium silicate solution as the activator. The synthesized products were characterized by mechanical testing, scanning electron microscopy (SEM), X-ray diffractography (XRD), as well as Fourier transform infrared spectroscopy (FTIR). The results of this study indicate that, via enhancing the reactivity by alkali fusion and balancing the Na/Al ratio by additional aluminosilicate source, low-reactive CFAs could also be recycled as an alternative source material for geopolymer production.

36 MATERIALS SCIENCE↗

Vanadium Geochemistry of Oil Sands Fluid Petroleum Coke

Vanadium has previously been linked to elevated toxicity of leachates derived from oil sands petroleum coke. However, geochemical controls on V mobility within coke deposits remain poorly constrained. Detailed examinations of porewater and solid-phase V geochemistry were therefore performed on oil sands fluid petroleum coke deposits in Alberta, Canada. Sample collection focused on both active and reclaimed deposits, which contained more than 3 × 10 7 m 3 of fluid petroleum coke. Dissolved V concentrations were highest (up to 3.0 mg L –1 ) immediately below the water table but decreased rapidly with increasing depth. This trend corresponded to a transition from mildly acidic (pH 6–7) and oxic conditions to mildly alkaline (pH 7–8.5) and anoxic conditions. Scanning electron microscopy (SEM), electron microprobe analysis (EMPA), and micro-X-ray fluorescence (μXRF) mapping revealed coke particles exhibited an internal structure characterized by successive concentric layers. Here, the outer margins of these layers were characterized by elevated V, Fe, Si, and Al concentrations, indicating the presence of inorganic phases. Micro-X-ray absorption near-edge structure (μXANES) spectroscopy revealed that V speciation was dominated by V(IV) porphyrins except at outer margins of layers, where octahedrally coordinated V(III) was a major component. Minor to trace V(V) was also detected within fluid petroleum coke particles.

58 GEOSCIENCES↗

Coarse-Grained Density Functional Theory Predictions via Deep Kernel Learning

Scalable electronic predictions are critical for soft materials design. Recently, the Electronic Coarse-Graining (ECG) method was introduced to renormalize all-atom quantum chemical (QC) predictions to coarse-grained (CG) resolutions using deep neural networks (DNNs). While DNNs can learn complex representations that prove challenging for kernel-based methods, they are susceptible to overfitting and the overconfidence of uncertainty estimations. Here, we develop ECG within a GPU-accelerated Deep Kernel Learning (DKL) framework to enable CG QC predictions using range-separated hybrid density functional theory (DFT), obtaining a 107 speedup relative to naive all-atom QC. By treating the predicted electronic properties as random Gaussian Processes, DKL incorporates CG mapping degeneracy by learning the distribution of electronic energies as a function of CG configuration. DKL-ECG accurately reproduces molecular orbital energies from range-separated DFT while facilitating efficient training via active learning using the uncertainties provided by DKL. Further, we show that while active learning algorithms enable efficient sampling of a more diverse configurational space relative to random sampling, all explored query methods exhibit comparable performance for the examined system. We attribute this result to the significant overlap of the feature space and output property distributions across multiple temperatures.

97 MATHEMATICS AND COMPUTING↗

3D-Bioprinted Marine Bacteria for the Degradation of Polyhydroxybutyrate Bioplastics

The severe, long-lasting harm caused by plastic pollution to marine ecosystems and coastal economies has led to the development of biodegradable plastics; however, their limited decomposition in marine environments remains a challenge. Here, technologies are presented for creating 3D-bioprinted living materials as a proof of concept for bioplastic degradation, with specific use in marine environments. The approach developed here integrates the halotolerant bioplastic-degrading bacterium Bacillus sp. NRRL B- 14911 into alginate-based bio-ink to print an engineered living material (ELM) termed a “bio-sticker.” Quantification of bacteria viability reveals that bioprinted marine bacteria survive within biostickers for more than 3 weeks. The rate at which the biostickers degrade the bioplastic polyhydroxybutyrate (PHB) can be tuned by altering biosticker biomass concentration, bioplastic concentration, or incubation temperature. Biostickers that are transferred to a different PHB sample still retain high biodegradation activity, demonstrating their reusability. Strain sweep oscillatory tests demonstrate that the biostickers display predominantly viscoelastic behavior. Monotonic tensile tests indicate that the elastic modulus and the adhesion of the biostickers are not negatively impacted by bacteria growth or incubation temperature. This work paves the way for the development of ELMs to facilitate the inclusion of bioplastics within the blue economy, promoting the emergence of more sustainable and ecofriendly materials.

3D bioprinting↗

The elphbolt ab initio solver for the coupled electron-phonon Boltzmann transport equations

elphbolt is a modern Fortran (2018 standard) code for efficiently solving the coupled electron–phonon Boltzmann transport equations from first principles. Using results from density functional and density functional perturbation theory as inputs, it can calculate the effect of the non-equilibrium phonons on the electronic transport (phonon drag) and non-equilibrium electrons on the phononic transport (electron drag) in a fully self-consistent manner and obeying the constraints mandated by thermodynamics. It can calculate the lattice, charge, and thermoelectric transport coefficients for the temperature gradient and electric fields, and the effect of the mutual electron–phonon drag on these transport properties. The code fully exploits the symmetries of the crystal and the transport-active window to allow the sampling of extremely fine electron and phonon wave vector meshes required for accurately capturing the drag phenomena. The corray feature of modern Fortran, which offers native and convenient support for parallelization, is utilized. The code is compact, readable, well-documented, and extensible by design.

electron drag↗

Mineral reaction kinetics constrain the length scale of rock matrix diffusion

Mass transport by aqueous fluids is a dynamic process in shallow crustal systems, redistributing nutrients as well as contaminants. Rock matrix diffusion into fractures (void space) within crystalline rock has been postulated to play an important role in the transient storage of solutes. The reacted volume of host rock involved, however, will be controlled by fluid-rock reactions. Here we present the results of a study which focusses on defining the length scale over which rock matrix diffusion operates within crystalline rock over timescales that are relevant to safety assessment of radioactive and other long-lived wastes. Through detailed chemical and structural analysis of natural specimens sampled at depth from an active system (Toki Granite, Japan), we show that, contrary to commonly proposed models, the length scale of rock matrix diffusion may be extremely small, on the order of centimetres, even over timescales of millions of years. This implies that in many cases the importance of rock matrix diffusion will be minimal. Additional analyses of a contrasting crystalline rock system (Carnmenellis Granite, UK) corroborate these results.

58 GEOSCIENCES↗

Ionic liquid-mediated synthesis of meso-scale porous lanthanum-transition-metal perovskites with high CO oxidation performance

Lanthanum-transition-metal perovskites with robust meso-scale porous frameworks (meso-LaMO 3 ) are synthesized through use of ionic liquids. The resultant samples demonstrate a rather high activity for CO oxidation, by taking advantage of unique nanostructure-derived benefits. This synthesis strategy opens up a new opportunity for preparing functional mesoporous complex oxides of various compositions.

36 MATERIALS SCIENCE↗

Ultrasensitive multi-species detection of CRISPR-Cas9 by a portable centrifugal microfluidic platform

The discovery of the RNA-guided DNA nuclease CRISPR-Cas9 has enabled the targeted editing of genomes from diverse organisms, but the permanent and inheritable nature of genome modification also poses immense risks. The potential for accidental exposure, malicious use, or undesirable persistence of Cas9 therapeutics and off-target genome effects highlight the need for detection assays. Here we report a centrifugal microfluidic platform for the measurement of both Cas9 protein levels and nuclease activity. Because Cas9 from many bacterial species have been adapted for biotechnology applications, we developed the capability to detect Cas9 from the widely-used S. pyogenes, as well as S. aureus, N. meningitidis, and S. thermophilus using commercially-available antibodies. Further, we show that the phage-derived anti-CRISPR protein AcrIIC1, which binds to Cas9 from several species, can be used as a capture reagent to broaden the species range of detection. Finally, as genome modification generally requires Cas9 nuclease activity, a fluorescence-based sedimentation nuclease assay was also incorporated to allow the sensitive and simultaneous measurement of both Cas9 protein and activity in a single biological sample.

59 BASIC BIOLOGICAL SCIENCES↗

Experiments and simulation on diffusion and activation of codoped with arsenic and phosphorous germanium

We report arsenic and phosphorus diffusion experiments and activation related phenomena in codoped germanium substrates utilizing conventional thermal annealing. Chemical profiles were obtained by secondary ion mass spectroscopy, sheet resistance was estimated by the Van der Pauw method. Our study covers the temperature range from 600 to 750 deg. C. We accurately described the dopant profiles with a quadratic dependence of the dopants diffusion coefficient on the free electron concentration. In our simulations we considered the dopant pile-up near the surface and dopant loss owing to outdiffusion during the annealing. Although the double donor codoping technique exhibited no advantage over monodoping with P concerning the level of activation and junction depth, it was interesting to observe the different diffusion behavior of the two dopants. Whereas the diffusion of As indicates a retardation under codoping the diffusion of P remains either unaffected or is slightly enhanced by codoping. The activation level of the codoped samples remains lower compared to the respective monodoped samples, except for the highest annealing temperature.

36 MATERIALS SCIENCE↗