Search NASA⌕ Search

SEARCH · Search NASA

Results for “sampling methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Computer design of antenna reflectors.

Performance of paraboloidal antenna reflectors is adversely influenced by surface distortions from a perfect paraboloid, which cause pathlength variations of the RF energy beam. The structural design objective for the surface backup structure is to minimize the rms pathlength deviations for gravity loading. Two design approaches are illustrated and applied to sample antenna structure designs. These are a sectional search method and a virtual work/Lagrange multiplier method. Both are shown to provide useful performance improvements. The second, however, appears to be more suited for application to design of large antenna structures.

Levy, R.↗

On the problem of radar effectiveness of discriminating thunderstorms and clouds

Data are presented on the effectiveness of detecting clouds (within a radius of 40 km) and thunderstorms (within a radius of 300 km) with the aid of instrumental (WR) and visual (weather station net) observations in the operational service of aviation. Data obtained on a large statistical sample confirm the very great effectiveness of the radar method of observations for thunderstorms and clouds with precipitation. The origin of certain probabilities for detecting stratiform clouds without precipitation which are small compared with the data of other authors is explained.

Allenov, P. A.↗

Geophysical, geochemical, and geological investigations of the Dunes geothermal system, Imperial Valley, California

The Dunes anomaly is a water-dominated geothermal system in the alluvium of the Salton Trough, lacking any surface expression. It was discovered by shallow-temperature gradient measurements. A 612-meter-deep test well encountered several temperature-gradient reversals, with a maximum of 105 C at 114 meters. The program involves surface geophysics, including electrical, gravity, and seismic methods, down-hole geophysics and petrophysics of core samples, isotopic and chemical studies of water samples, and petrological and geochemical studies of the cores and cuttings. The aim is (1) to determine the source and temperature history of the brines, (2) to understand the interaction between the brines and rocks, and (3) to determine the areal extent, nature, origin, and history of the geothermal system. These studies are designed to provide better definition of exploration targets for hidden geothermal anomalies and to contribute to improved techniques of exploration and resource assessment.

Elders, W. A.↗

Automated space processing payloads study. Volume 2, book 2: Technical report, appendices A through E

Experiment hardware and operational requirements for space shuttle experiments are discussed along with payload and system concepts. Appendixes are included in which experiment data sheets, chamber environmental control and monitoring, method for collection and storage of electrophoretically-separated samples, preliminary thermal evaluation of electromagnetic levitation facilities L1, L2, and L3, and applicable industrial automation equipment are discussed.

Source record↗

A measurement system for the atmospheric trace gases CH4 and CO

A system for measuring ambient clean air levels of the atmospheric trace gases methane and carbon monoxide is described. The analytical method consists of a gas chromatographic technique that incorporates sample preconcentration with catalytic conversion of CO to CH4 and subsequent flame ionization detection of these gases. The system has sufficient sensitivity and repeatability to make the precise measurements required to establish concentration profiles for CO and CH4 in the planetary boundary layer. A discussion of the bottle sampling program being conducted to obtain the samples for the concentration profiles is also presented.

Condon, E. P.↗

The parameters of a VCM test for the selection of space materials

Materials for space applications must have low outgassing rates at normal operating temperatures and the outgassing products should include a minimum of condensables at the temperatures of nearby surfaces. A screening method, developed years ago, consists of holding a material sample at 398 K (125 C) for 24 hours and measuring its percentage total mass loss (TML) and the percentage volatile condensable mass (VCM) accreted on a 298 K (25 C) collector. In general, the material is acceptable if the TML is less than 1 percent and the VCM is less than 0.1 percent. This paper presents an analysis of the test and its results. It shows that the results of TML and VCM can be used to provide data on outgassing rates and to derive an 'equivalent activation energy' for the material. The energy variables are needed for the calculation of pressure in compartments, the molecular contamination of critical surfaces, and other problems in molecular flow and surface physics. The analysis points out the criticality of the test and its limits with regards to the detection of condensables from certain materials.

Scialdone, J. J.↗

Extinction-sedimentation inversion technique for measuring size distribution of artificial fogs

In measuring the size distribution of artificial fog particles, it is important that the natural state of the particles not be disturbed by the measuring device, such as occurs when samples are drawn through tubes. This paper describes a method for carrying out such a measurement by allowing the fog particles to settle in quiet air inside an enclosure through which traverses a parallel beam of light for measuring the optical depth as a function of time. An analytic function fit to the optical depth time decay curve can be directly inverted to yield the size distribution. Results of one such experiment performed on artificial fogs are shown as an example. The forwardscattering corrections to the measured extinction coefficient are also discussed with the aim of optimizing the experimental design so that the error due to forwardscattering is minimized.

Deepak, A.↗

Crop identification and area estimation by computer-aided analysis of Landsat data

This report describes the results of a study involving the use of computer-aided analysis techniques applied to Landsat MSS data for identification and area estimation of winter wheat in Kansas and corn and soybeans in Indiana. Key elements of the approach included use of aerial photography for classifier training, stratification of Landsat data and extension of training statistics to areas without training data, and classification of a systematic sample of pixels from each county. Major results and conclusions are: (1) Landsat data was adequate for accurate identification and area estimation of winter wheat in Kansas, but corn and soybean estimates for Indiana were less accurate; (2) computer-aided analysis techniques can be effectively used to extract crop identification information from Landsat MSS data, and (3) systematic sampling of entire counties made possible by computer classification methods resulted in very precise area estimates at county as well as district and state levels.

Bauer, M. E.↗

Laser probe /Ar-39/-/Ar-40/ dating of materials from consortium breccia 73215

The unique capacity of the laser-probe (Ar-39)-(Ar-40) method to determine ages of constituents in a rock sample which are only of the order of 100 microns apart has been applied to measure ages of the different constituents of consortium breccia 73215. Evidence is given that the age of the melt-derived ground mass, 4.01 + or - 0.05 billion years, has no chronological significance. Instead, the best estimate for the age of the breccia-forming event, about 3.90 billion years, comes from the study of two clasts only a few hundred micrometers in size. The interpretation of this age as the age of the breccia-forming event is also supported by the studies of other consortium members and suggests a reinterpretation of the ages of most of the other Apollo 17 highland breccias.

Mueller, H. W.↗

Continuous Czochralski Growth. Silicon Sheet Growth Development of the Large Area Silicon Sheet Task of the Low Cost Silicon Solar Array Project

During the reporting period, a successful 100 kilogram run was performed. Six ingots of 13 cm diameter were grown, ranging in size from 15.5 kg to 17.7 kg. Melt replenishment methods included both poly rod and lump feed material. Samples from each ingot were prepared for solar cell fabrication and analyses, impurity analysis, and structural studies. The furnace was converted to the 14-inch hot zone and preliminary heat runs were performed. Two sucessful runs were demonstrated, by growing 25 kg ingots from 30 kg melts. Also, a 100 kg run was attempted, utilizing the 14 inch crucible hot zone, but was prematurely terminated due to excessive monoxide which accumulated on the viewports and a seed failure.

Merz, F.↗

Spacecraft attitude and articulation control systems for future planetary missions

Comparative evaluations of the major types of control systems, such as three-axis-active, spin-stabilized, dual spin, and momentum basis, are performed to determine their applicability for planetary missions in the early 1990s. The key requirements that determine control system selection are science functional, mission orbital, and vehicle configuration characteristics. Five functional groups are given for preliminary control system selection: (1) preliminary survey; (2) detailed remote observation; (3) close scrutiny - deep space; (4) close scrutiny - near sun; (5) sample return. Requirements affecting the selection of attitude/articulation control methods, comparison of the performance capabilities of competing control concepts, criteria for selecting competing methods, comparison of relative complexity, and identification of hardware needs and trends that may affect control system selection are considered.

Mcglinchey, L. F.↗

Stresses in adhesively bonded joints: A closed form solution

The plane strain of adhesively bonded structures which consist of two different orthotropic adherents is considered. Assuming that the thicknesses of the adherends are constant and are small in relation to the lateral dimensions of the bonded region, the adherends are treated as plates. The transverse shear effects in the adherends and the in-plane normal strain in the adhesive are taken into account. The problem is reduced to a system of differential equations for the adhesive stresses which is solved in closed form. A single lap joint and a stiffened plate under various loading conditions are considered as examples. To verify the basic trend of the solutions obtained from the plate theory a sample problem is solved by using the finite element method and by treating the adherends and the adhesive as elastic continua. The plate theory not only predicts the correct trend for the adhesive stresses but also gives rather surprisingly accurate results.

Delale, F.↗

Characterization of the physico-chemical properties of polymeric materials for aerospace flight

Electrodes and electrolytes of nickel cadmium sealed batteries were analyzed. Different thermal analysis of negative and positive battery electrodes was conducted and the temperature ranges of occurrence of endotherms indicating decomposition of cadmium hydroxide and nickel hydroxide are identified. Atomic absorption spectroscopy was used to analyze electrodes and electrolytes for traces of nickel, cadmium, cobalt, and potassium. Calibration curves and data are given for each sample analyzed. Instrumentation and analytical procedures used for each method are described.

Rock, M.↗

A data based random number generator for a multivariate distribution (using stochastic interpolation)

Let X be a K-dimensional random variable serving as input for a system with output Y (not necessarily of dimension k). given X, an outcome Y or a distribution of outcomes G(Y/X) may be obtained either explicitly or implicity. The situation is considered in which there is a real world data set X sub j sub = 1 (n) and a means of simulating an outcome Y. A method for empirical random number generation based on the sample of observations of the random variable X without estimating the underlying density is discussed.

Thompson, J. R.↗

On orbit surfacing of thermal control surfaces

Substrates to be contaminated and contamination source were prepared. Additional information on paint spray method apparatus was obtained. Silver teflon second surface mirror samples and S 13 GLO paint samples were mounted, photographed under the microscope and measured to establish baseline data. Atomic oxygen cleaning and spray painting are being considered. Electrostatic powder and plasma spray coating systems appear to have serious drawbacks.

Racette, G. W.↗

On the evaluation of expected performance cost for partially observed closed-loop stochastic systems

New methods are presented for evaluating the expected performance cost of partially observed closed-loop stochastic systems. When the variances of the process statistics are small, a linearized model of the closed-loop stochastic system is defined for which the expected cost can be evaluated by recursion on a set of purely deterministic difference equations. When the variances of the process statistics are large, the linearized model can be used in the control variate method of variance reduction for reducing the number of sample paths required for effective Monte Carlo estimation.

Bayard, D. S.↗