Search NASA⌕ Search

SEARCH · Search NASA

Results for “shape approximation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Quantitative Collision Cross-Sections from FTICR Linewidth Measurements: Improvements in Theory and Experiment

Two corrections to the equation used in the cross-sectional areas by Fourier transform ion cyclotron resonance (“CRAFTI”) technique are identified. In CRAFTI, ion collision cross-sections are obtained from the pressure-dependent ion linewidths in Fourier transform mass spectra. The effects of these corrections on the accuracy of the cross-sections obtained using the CRAFTI technique are evaluated experimentally using the 20 biogenic amino acids and several crown ether complexes with protonated alkyl monoamines. Good absolute agreement is obtained between the CRAFTI cross-sections and the corresponding cross-sections obtained using both static drift ion mobility spectrometry and computational simulations. These results indicate that the CRAFTI cross-sections obtained using the updated equation presented here are quantitatively descriptive of the size and shape of the gas-phase ions. Cross-sections that differ by less than 3% are measured for the isobaric isomers n-butylamine and tert-butylamine complexed with the crown ethers. This level of precision is similar to what has been achieved previously using traveling wave ion mobility devices. These results indicate that CRAFTI can be used to probe subtle structural differences between ions with approximately the same precision as that achieved in traveling wave ion mobility devices. .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Magnetic Control of a Tokamak Plasma

The plasma in a tokamak is magnetically confined through electromagnetic fields generated by a set of poloidal field coils, with feedforward nominal voltages or currents based on an approximate plasma model. Therefore, feedback control is necessary. A good magnetic control is essential for achieving good performance in present devices and expected to be of paramount importance in future tokamaks with a burning plasma due to the more stringent requirements in terms of plasma-wall clearance, stability margins, limited number of tolerable disruptions and so on. Magnetic fields are able to control plasma current, position and shape as well as three dimensional instabilities on the resistive time scales (resistive wall modes). They also have an influence on the control of the plasma current density profile. This paper focuses on the axisymmetric control of plasma current, position and shape, illustrating modelling assumptions and techniques, controller design procedures, assessment of controller performance and magnetic diagnostic requirements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The mass and galaxy distribution around SZ-selected clusters

ABSTRACT We present measurements of the radial profiles of the mass and galaxy number density around Sunyaev–Zel’dovich (SZ)-selected clusters using both weak lensing and galaxy counts. The clusters are selected from the Atacama Cosmology Telescope Data Release 5 and the galaxies from the Dark Energy Survey Year 3 data set. With signal-to-noise ratio of 62 (45) for galaxy (weak lensing) profiles over scales of about 0.2–20 h−1 Mpc, these are the highest precision measurements for SZ-selected clusters to date. Because SZ selection closely approximates mass selection, these measurements enable several tests of theoretical models of the mass and light distribution around clusters. Our main findings are: (1) The splashback feature is detected at a consistent location in both the mass and galaxy profiles and its location is consistent with predictions of cold dark matter N-body simulations. (2) The full mass profile is also consistent with the simulations. (3) The shapes of the galaxy and lensing profiles are remarkably similar for our sample over the entire range of scales, from well inside the cluster halo to the quasilinear regime. We measure the dependence of the profile shapes on the galaxy sample, redshift, and cluster mass. We extend the Diemer & Kravtsov model for the cluster profiles to the linear regime using perturbation theory and show that it provides a good match to the measured profiles. We also compare the measured profiles to predictions of the standard halo model and simulations that include hydrodynamics. Applications of these results to cluster mass estimation, cosmology, and astrophysics are discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

Kinetic theory of the electron strahl in the solar wind

ABSTRACT We develop a kinetic theory for the electron strahl, a beam of energetic electrons which propagate from the sun along the Parker-spiral-shaped magnetic field lines. Assuming a Maxwellian electron distribution function in the near-sun region where the plasma is collisional, we derive the strahl distribution function at larger heliospheric distances. We consider the two most important mechanisms that broaden the strahl: Coulomb collisions and interactions with oblique ambient whistler turbulence (anomalous diffusion). We propose that the energy regimes where these mechanisms are important are separated by an approximate threshold, ${\cal E}_\mathrm{ c}$; for the electron kinetic energies ${\cal E}\,\lt\, {\cal E}_\mathrm{ c}$ the strahl width is mostly governed by Coulomb collisions, while for ${\cal E}\,\gt\, {\cal E}_\mathrm{ c}$ by interactions with the whistlers. The Coulomb broadening decreases as the electron energy increases; the whistler-dominated broadening, on the contrary, increases with energy and it can lead to efficient isotropization of energetic electrons and to the formation of the electron halo. The threshold energy ${\cal E}_\mathrm{ c}$ is relatively high in the regions closer to the sun, and it gradually decreases with the distance, implying that the anomalous diffusion becomes progressively more important at large heliospheric distances. At 1 au, we estimate the energy threshold to be about ${\cal E}_\mathrm{ c}\,\sim\, 200\, {\rm eV}$.

79 ASTRONOMY AND ASTROPHYSICS↗

Dissecting subcycle interference in photoelectron holography

Multipath holographic interference in strong-field quantum tunnel ionization is key to revealing subangstrom attosecond dynamics for molecular movies. This critical subcycle motion is often obscured by longer timescale effects such as ring-shaped patterns that appear in above-threshold ionization (ATI). In the present work, we overcome this problem by combining two techniques in theory and experimental analysis: unit-cell averaging and time-filtering data and simulations. Together these suppress ATI rings and enable an unprecedented highly detailed quantitative match between strong-field ionization experiments in argon and the Coulomb-quantum orbit strong-field approximation (CQSFA) theory. Velocity map images reveal fine modulations on the holographic spiderlike interference fringes that form near the polarization axis. CQSFA theory traces this to the interference of three types of electron pathways. The level of agreement between experiment and theory allows sensitive determination of quantum phase differences and symmetries, providing an important tool for quantitative dynamical imaging in quantum systems.

74 ATOMIC AND MOLECULAR PHYSICS↗

High-quality genome sequence of the radioresistant bacterium Deinococcus ficus KS 0460

Abstract The genetic platforms of Deinococcus species remain the only systems in which massive ionizing radiation (IR)-induced genome damage can be investigated in vivo at exposures commensurate with cellular survival. We report the whole genome sequence of the extremely IR-resistant rod-shaped bacterium Deinococcus ficus KS 0460 and its phenotypic characterization. Deinococcus ficus KS 0460 has been studied since 1987, first under the name Deinobacter grandis , then Deinococcus grandis . The D. ficus KS 0460 genome consists of a 4.019 Mbp sequence (69.7% GC content and 3894 predicted genes) divided into six genome partitions, five of which are confirmed to be circular. Circularity was determined manually by mate pair linkage. Approximately 76% of the predicted proteins contained identifiable Pfam domains and 72% were assigned to COGs. Of all D. ficus KS 0460 proteins, 79% and 70% had homologues in Deinococcus radiodurans ATCC BAA-816 and Deinococcus geothermalis DSM 11300, respectively. The most striking differences between D. ficus KS 0460 and D. radiodurans BAA-816 identified by the comparison of the KEGG pathways were as follows: (i) D. ficus lacks nine enzymes of purine degradation present in D. radiodurans , and (ii) D. ficus contains eight enzymes involved in nitrogen metabolism, including nitrate and nitrite reductases, that D. radiodurans lacks. Moreover, genes previously considered to be important to IR resistance are missing in D. ficus KS 0460, namely, for the Mn-transporter nramp , and proteins DdrF, DdrJ and DdrK, all of which are also missing in Deinococcus deserti . Otherwise, D. ficus KS 0460 exemplifies the Deinococcus lineage.

Genetics & Heredity↗

Measurement of Charged Current Inclusive $\bar{V}_\mu$ Interactions and 2p2h Contribution Using the NOvA Near Detector

More precise measurements of the scattering of antineutrinos on nuclei in the few GeV region of incident energy, $E_{\nu}$, can reveal new aspects of $v/\bar{v}$ interactions and of nuclear structure, while providing information crucial to continued progress by neutrino oscillation experiments. This Thesis reports an investigation of charged current $\bar{v}_\mu$ interactions in the predominantly hydrocarbon medium of the NOvA Near Detector. The data are obtained with the detector exposed to a narrow-band $\bar{v}$ µ beam with spectral peak at E ν = 2.0 GeV, for a total accumulated exposure of 12.5×10$^{20}$ protons-on-target. The analysis expresses results in terms of three-momentum transfer,|$\vec{q}$| and available hadronic energy, $E$ avail . These variables approximate (q 0 , |$\vec{q}$|), the variables used in theoretical treatments of lepton scattering on multi-nucleon systems such as in 2-particle-2-hole (2p2h) processes. This Thesis delivers two core measurements: Firstly, the double-dierential cross section $d^2σ/d|\vec{q} |dE_{avail}$ for inclusive CC $\bar{v}_\mu$ interactions in the NOvA detector medium is obtained. The cross section has a roughly gaussian shape in its projection onto |$\vec{q}$|, while being largely concentrated at values of $E$ avail below 100 MeV. The single diferential cross sections dσ/d|$\vec{q}$| and dσ/dE avail are also obtained, and are compared to predictions based on the GENIE v3.0.6 neutrino generator augmented with four different implementations of 2p2h reactions. Secondly, the contribution of 2p2h reactions to the CC inclusive scattering sample is determined. Its presence is characterized in terms of double-differential and single-differential cross sections. The latter 2p2h distributions are compared to predictions from two experimental data-tune models and from two theory-based models, namely the SuSAv2 model and the Valencia model. Both of the theoretical models underpredict the measured cross-section strength and predict a shape for dσ/d|$\vec{q}$| that is flatter than the measured shape. Thus, this Thesis provides new information about CC antineutrino-nucleus scattering in the vicinity of Eν ~ 2 GeV, and it highlights improvements that are needed in theoretical treatments of 2p2h reactions.

43 PARTICLE ACCELERATORS↗

Application of probability method to demonstrate unsafe configuration of dropped cans is not credible - 14268

An unanalyzed condition was identified for a transport cart that could result in multiple cans falling onto the ground. Calculations showed there were arrangements of four cans or five cans that could exceed the allowable k{sub eff} limit for a single upset. This was reported to the US Nuclear Regulatory Commission as an unanalyzed condition. The cans would have to fall with very little spacing between them. The likelihood of this arrangement needed to be assessed. The probability of the unacceptable configuration was calculated based on a variation of Buffon's Clean Tile Problem. A series of conservative approximations were used including assuming that the rectangular cans are inscribed cylinders and the cylinders land on the base and do not tip over. Even with the conservative assumptions used, the calculated likelihood was less than 1 in 1,000,000 years. The notification was withdrawn based on this work since the event could be categorized as not credible. Additionally work was performed to account for the actual shape of the cans and rotation of the cans. The analysis was performed using a Monte Carlo simulation. The average center-to-center spacing was used to establish a correlation with the system reactivity. The average center-to-center spacing also correlates with the probability of the configuration. With this the probability of having an unacceptable k{sub eff} was established. (authors)

42 ENGINEERING↗

Conforming window functions for meshfree methods

Window functions provide a base for the construction of approximation functions in many meshfree methods. They control the smoothness and extent of the approximation functions and are commonly defined using Euclidean distances which helps eliminate the need for a meshed discretization, simplifying model development for some classes of problems. However, for problems with complicated geometries such as nonconvex or multi-body domains, poor solution accuracy and convergence can occur unless the extents of the window functions, and thus approximation functions, are carefully controlled, often a time consuming or intractable task. Here in this paper, we present a method to provide more control in window function design, allowing efficient and systematic handling of complex geometries. “Conforming” window functions are constructed using Bernstein–Bézier splines defined on local triangulations with constraints imposed to control smoothness. Graph distances are used in conjunction with Euclidean metrics to provide adequate information for shaping the window functions. The conforming window functions are demonstrated using the Reproducing Kernel Particle Method showing improved accuracy and convergence rates for problems with challenging geometries. Conforming window functions are also demonstrated as a means to simplify the imposition of essential boundary conditions.

, rapid design-to-analysis↗

Local-field excitations in two-dimensional lattices of resonant atoms

We study excitations of the local field (locsitons) in nanoscale two-dimensional (2D) lattices of strongly interacting resonant atoms and various unusual effects associated with them. Locsitons in low-dimensional systems and the resulting spatial strata and more complex patterns on a scale of just a few atoms were predicted by us earlier [A. E. Kaplan and S. N. Volkov, Phys. Rev. Lett. 101, 133902 (2008)]. These effects present a radical departure from the classical Lorentz-Lorenz theory of the local field (LF), which assumes that the LF is virtually uniform on this scale. We demonstrate that the strata and patterns in the 2D lattices may be described as an interference of plane-wave locsitons, build an analytic model for such unbounded locsitons, and derive and analyze dispersion relations for the locsitons in an equilateral triangular lattice. We draw useful analogies between 1D and 2D locsitons but also show that the 2D case enables locsitons with the most diverse and unusual properties. Using the nearest-neighbor approximation, we find the locsiton frequency band for different mutual orientations of the lattice and the incident field. We demonstrate a formation of distinct vector locsiton patterns consisting of multiple vortices in the LF distribution and suggest a way to design finite 2D lattices that exhibit such patterns at certain frequencies. We illustrate the role of lattice defects in supporting localized locsitons and also demonstrate the existence of 'magic shapes', for which the LF suppression at the exact atomic resonance is canceled.

74 ATOMIC AND MOLECULAR PHYSICS↗

Broad ion energy distributions in helicon wave-coupled helium plasma

Helium ion energy distributions were measured in the helicon wave-coupled plasma of the DIONISOS experiment with a retarding field energy analyzer. The shape of the energy distribution is double-peaked, characteristic of RF plasma potential modulation. The broad distribution is located within a radius of 0.8 cm while the quartz tube of the plasma source has an inner radius of 2.2 cm. The ion energy distribution rapidly changes from double-peaked to a single peak in the radius range of 0.7 to 0.9 cm. The average ion energy is approximately uniform across the plasma column including the double-peaked and single peak regions. The widths of the broad distribution, dE, in the wave-coupled mode are large compared to the time-averaged ion energy, . On axis (r = 0), dE/ ~ 3.4, and at a radius near the edge of the plasma column (r = 2.2 cm), dE/ ~1.2. The discharge parameter space is scanned to investigate the effects of magnetic field, input power, and chamber fill pressure on the wave-coupled mode that exhibits sharp radial variation in the ion energy distribution.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Materials for High-Pressure Fuel Injection Systems

The high-level goal of this multi-year effort was to facilitate the Advanced Combustion Engine goal of 20% improvement (compared to 2009 baseline) of commercial engine efficiency by 2015. A sub-goal is to increase the reliability of diesel fuel injectors by investigating modelbased scenarios that cannot be achieved by empirical, trial and error methodologies alone. During this three-year project, ORNL developed the methodology to evaluate origins and to record the initiation and propagation of fatigue cracks emanating from holes that were electrodischarge machined (EDM), the method used to form spray holes in fuel injector tips. Both x-ray and neutron-based methods for measuring residual stress at four different research facilities were evaluated to determine which, if any, was most applicable to the fuel injector tip geometry. Owing to the shape and small volumes of material involved in the sack area, residual stress data could only be obtained in the walls of the nozzle a few millimeters back from the tip, and there was a hint of only a small compressive stress. This result was consistent with prior studies by Caterpillar. Residual stress studies were suspended after the second year, reserving the possibility of pursuing this in the future, if and when methodology suitable for injector sacks becomes available. The smooth specimen fatigue behavior of current fuel injector steel materials was evaluated and displayed a dual mode initiation behavior. At high stresses, cracks started at machining flaws in the surface; however, below a critical threshold stress of approximately 800 MPa, cracks initiated in the bulk microstructure, below the surface. This suggests that for the next generation for high-pressure fuel injector nozzles, it becomes increasingly important to control the machining and finishing processes, especially if the stress in the tip approaches or exceeds that threshold level. Fatigue tests were also conducted using EDM notches in the gage sections. Compared to the smooth specimens, EDM notching led to a severe reduction in total fatigue life. A reduction in fatigue life of nearly four orders of magnitude can occur at an EDM notch the approximate size of fuel injector spray holes. Consequently, the initiation and propagation behavior of cracks from small spray holes is relevant for generation of design quality data for the next generation diesel fuel injection devices. This is especially true since the current design methodologies usually rely on the less conservative smooth specimen fatigue testing results, and since different materials can have varying levels of notch fatigue resistance.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

GENERALIZED SEMI-ANALYTICAL MODELS OF SUPERNOVA LIGHT CURVES

We present generalized supernova (SN) light curve (LC) models for a variety of power inputs including the previously proposed ideas of radioactive decay of {sup 56}Ni and {sup 56}Co and magnetar spin-down. We extend those solutions to include finite progenitor radius and stationary photospheres as might be the case for SN that are powered by interaction of the ejecta with circumstellar matter (CSM). We provide an expression for the power input that is produced by self-similar forward and reverse shocks that efficiently convert their kinetic energy into radiation. We find that this ejecta-CSM interaction luminosity that we derive is in agreement with results from multi-dimensional radiation hydrodynamics simulations in the case of an optically thin CSM. We develop a semi-analytical model for the case of an optically thick CSM by invoking an approximation for the effects of radiative diffusion similar to that adopted by Arnett for SN II and compare this model to the results of numerical radiation hydrodynamics models. This model can give complex LCs, but for monotonically declining shock input, the LCs have a smooth rise, peak, and decline. In the context of this model, we provide predictions of the shock breakout of the forward shock from the optically thick part of the CSM envelope. We also introduce a hybrid LC model that incorporates ejecta-CSM interaction plus {sup 56}Ni and {sup 56}Co radioactive decay input. We fit this hybrid model to the LC of the super-luminous supernova (SLSN) 2006gy. We find that shock heating produced by ejecta-CSM interaction plus some contribution from radioactive decay provides a better fit to the LC of this event than previously presented models. We also address the relation between SN IIL and SN IIn with ejecta-CSM interaction models. The faster decline of SN IIL can be reproduced by the diffusion of previously deposited shock power if the shock power input to the diffusive component vanishes when the reverse shock sweeps up the whole ejecta and/or the forward shock propagates through the optically thick CSM. A CSM interaction with forward and reverse shock power input can produce the LCs of SN IIn in terms of duration, shape, and decline rate, depending on the properties of the CSM envelope and the progenitor star. This model can also produce LCs that are symmetric in shape around peak luminosity, which is the case for the observed LCs of some recently discovered peculiar transient events. We conclude that the observed LC variety of SN IIn and of some SLSNe is likely to be a byproduct of the large range of conditions relevant to significant ejecta-CSM interaction as a power source.

79 ASTRONOMY AND ASTROPHYSICS↗

The lattice parameter – composition relationship of the body centered cubic uranium-niobium alloys

In this paper, in-situ time-of-flight neutron diffraction experiments were performed on uranium-niobium alloy with 6 wt% Nb to study the lattice parameter-composition relationship for the body centered cubic (bcc) alloys. Based on lattice-parameter measurements of Nb-supersaturated γs phase over the range of 450 – 790 °C, an improved Vegard's-type relationship was established for determination of Nb concentrations at elevated temperatures. Neutron diffraction data were also collected as a function of aging time over the 450 - 600 °C range when γs phase decomposed isothermally into the mixture of orthorhombic α-U and Nb-rich bcc phase, as well as at room-temperature on the alloys aged ex-situ at 500 °C up to five years. From these measurements, the average Nb concentrations in the bcc phase were determined based on the Rietveld refinements of weight fraction and mass conservation relations (lever rule). Over the 15at% – 78at% range of Nb concentrations that correspond to different experimental aging times, the lattice parameters at constant temperatures exhibit a nonlinear S-shaped variation with Nb concentration, and the associated excess volumes of mixing can be described by a subregular solution model of the Redlich–Kister type of polynomial. Over the full range of composition the S-shaped deviation from Vegard's law can be modeled using a combination of an elastic continuum model and a perturbation to the radii of the solute atoms in the solvent, suggesting that electronic interactions between solute and solvent atoms could play an important role in the compositional dependence of lattice parameter for the γ-phase U-Nb alloys. While Vegard's law is a straightforward and reasonably good approximation for the bcc solid solutions in the U-Nb system, the Nb concentrations determined from the weight fraction refinements of diffraction data provide internally consistent, mass-conserving estimates of solute redistribution for the monotectoid reaction.

36 MATERIALS SCIENCE↗

Pre-compression effect on microstructure evolution of extruded pure polycrystalline magnesium during reversed tension load

Highlights: • Number of twin variants under compression along ED is dependent on grain orientation. • Tension after pre-compression results in low-SF twinning and secondary twinning. • Secondary twinning is facilitated by increasing pre-compression. • Sub-grains due to twinning enhance material strength. - Abstract: The microstructure evolution of extruded pure polycrystalline magnesium under compression followed by subsequent tension in ambient air was investigated. Solid round dog-bone shaped specimens were compressed along the extrusion direction (ED) to − 7.3% and − 12.8% true strains, respectively, and then tensioned along the ED to failure. Electron backscatter diffraction (EBSD) was used to examine the microstructure evolution using companion specimens unloaded at multiple points along the deformation curves. Pre-compression along the ED resulted in {10 1-bar 2} tension twinning which increased in volume with increasing strain until exhaustion at approximately − 10.5% true strain. Tensile reloading of the pre-compressed specimens led to a combination of low Schmid factor twinning, detwinning, and secondary {10 1-bar 2} tension twinning. Detwinning was more significant than secondary twinning in the − 7.3% pre-compressed specimens, where only one secondary twin variant was observed. {10 1-bar 2} secondary twinning was more significant in the − 12.8% pre-compressed specimens, where up to three secondary twin variants were observed. After complete detwinning of primary twins, the secondary twins were retained and appeared as sub-grains. The residual sub-grains resulted from secondary twinning may provide a strengthening mechanism for wrought Mg alloys.

36 MATERIALS SCIENCE↗

High-precision instrument for measuring the surface tension, viscosity and surface viscoelasticity of liquids using ripplon surface laser-light scattering with tunable wavelength selection

Here we describe our new high-precision instrument that simultaneously measures the surface tension, viscosity, and surface viscoelasticity of liquids. The instrument works on the ripplon surface-laser light scattering principle and operates with an automatically tunable selection of ripplon wavelength from 4 to 1500 μm, which corresponds to the frequency range of observing surface phenomena from approximately 400 Hz to 3 MHz in the case of water. The heterodyne technique instrument uses a reference laser beam which intersects at an arbitrarily adjustable angle with a vertically directed probing beam. For the determination of the wavelength of selected ripplons we substituted with the interference fringe spacing, measured using a high-resolution beam profiler. To extract reliable surface tension and viscosity data from the experimentally obtained spectrum shape for a selected wavelength of ripplon, we developed an algorithm to calculate the exact solution of the dispersion equation. The uncertainties of surface tension and viscosity measurement were confirmed through the measurement of seven pure Newtonian liquids at 25 °C measured with the selected wavelength of ripplon from 40 μm to 467 μm. To verify the genuine capability of the tunable wavelength selection of ripplon, we measured the surface elasticity of soluble surface molecular layers spread on pentanoic acid solutions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Compliance and control characteristics of an additive manufactured-flexure stage

This paper presents a compliance and positioning control characteristics of additive manufactured-nanopositioning system consisted of the flexure mechanism and voice coil motor (VCM). The double compound notch type flexure stage was designed to utilize the elastic deformation of two symmetrical four-bar mechanisms to provide a millimeter-level working range. Additive manufacturing (AM) process, stereolithography, was used to fabricate the flexure stage. The AM stage was inspected by using 3D X-ray computerized tomography scanner: air-voids and shape irregularity. The compliance, open-loop resonance peak, and damping ratio of the AM stage were measured 0.317 mm/N, 80 Hz, and 0.19, respectively. The AM stage was proportional-integral-derivative positioning feedback-controlled and the capacitive type sensor was used to measure the displacement. As a result, the AM flexure mechanism was successfully 25 nm positioning controlled within 500 μm range. The resonance peak was found approximately at 280 Hz in closed-loop. This research showed that the AM flexure mechanism and the VCM can provide millimeter range with high precision and can be a good alternative to an expensive metal-based flexure mechanism and piezoelectric transducer.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A high-fidelity approach towards simulation of pool boiling

A novel numerical approach is developed to simulate the multiscale problem of pool-boiling phase change. The particular focus is to develop a simulation technique that is capable of predicting the heat transfer and hydrodynamic characteristics of nucleate boiling and the transition to critical heat flux on surfaces of arbitrary shape and roughness distribution addressing a critical need to design enhanced boiling heat transfer surfaces. The macro-scale of the phase change and bubble dynamics is addressed through employing off-the-shelf Computational Fluid Dynamics (CFD) methods for interface tracking and interphase mass and energy transfer. The micro-scale of the microlayer, which forms at early stage of bubble nucleation near the wall, is resolved through asymptotic approximation of the thin-film theory which provides a closed-form solution for the distribution of the micro-layer and its influence on the evaporation process. In addition, the sub-grid surface roughness is represented stochastically through probabilistic density functions and its role in bubble nucleation and growth is then represented based on the thermodynamics of nucleation process. This combination of deterministic CFD, local approximation, and stochastic representation allows the simulation of pool boiling on any surface with known roughness and enhancement characteristics. The numerical model is validated for dynamics and hydrothermal characteristics of a single nucleated bubble on a flat surface against available literature data. In addition, the prediction of pool-boiling heat transfer coefficient is verified against experimental measurements as well as reputable correlations for various roughness distributions and different surface orientations. Finally, the model is employed to demonstrate pool-boiling phenomenon on enhanced structures with reentrance cavities and to explore the effect of enhancement feature design on thermal and hydrodynamic characteristics of these surfaces.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗