Search NASA⌕ Search

SEARCH · Search NASA

Results for “stability analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Effect of a forced Couette flow on coupled convective and morphological instabilities during unidirectional solidification

The effect of a forced Couette flow, parallel to a horizontal crystal-melt interface during directional solidification of an alloy of lead containing tin, on the onset of convective and morphological instabilities, is calculated numerically via a linear stability analysis. Such a flow does not affect perturbations with wave vectors perpendicular to the flow. For perturbations with wave vectors parallel to the flow, the onset of morphological instability is somewhat suppressed and thermosolutal convection is greatly suppressed. When instabilities occur, they are oscillatory and correspond to travelling waves. For values of the crystal growth velocity for which mixed morphological and convective modes occur, the presence of a forced flow produces sufficient decoupling to allow otherwise degenerate branches to be identified.

Coriell, S. R.↗

Mach number effects on transonic aeroelastic forces and flutter characteristics

Transonic aeroelastic stability analysis and flutter calculations are presented for a generic transport-type wing based on the use of the CAP-TSD (Computational Aeroelasticity Program - Transonic Small Disturbance) finite-difference code. The CAP-TSD code was recently developed for transonic unsteady aerodynamic and aeroelastic analysis of complete aircraft configurations. A binary aeroelastic system consisting of simple bending and torsion modes was used to study aeroelastic behavior at transonic speeds. Generalized aerodynamic forces are presented for a wide range of Mach number and reduced frequency. Aeroelastic characteristics are presented for variations in freestream Mach number, mass ratio, and bending-torsion frequency ratio. Flutter boundaries are presented which have two transonic dips in flutter speed. The first dip is the usual transonic dip involving a bending-dominated flutter mode. The second dip is characterized by a single degree-of-freedom torsion oscillation. These aeroelastic results are physically interpreted and shown to be related to the steady state shock location and changes in generalized aerodynamic forces due to freestream Mach number.

Mohr, Ross W.↗

Boundary-layer stability and airfoil design

Several different natural laminar flow (NLF) airfoils have been analyzed for stability of the laminar boundary layer using linear stability codes. The NLF airfoils analyzed come from three different design conditions: incompressible; compressible with no sweep; and compressible with sweep. Some of the design problems are discussed, concentrating on those problems associated with keeping the boundary layer laminar. Also, there is a discussion on how a linear stability analysis was effectively used to improve the design for some of the airfoils.

Viken, Jeffrey K.↗

A computer-aided approach to nonlinear control systhesis

The major objective of this project is to develop a computer-aided approach to nonlinear stability analysis and nonlinear control system design. This goal is to be obtained by refining the describing function method as a synthesis tool for nonlinear control design. The interim report outlines the approach by this study to meet these goals including an introduction to the INteractive Controls Analysis (INCA) program which was instrumental in meeting these study objectives. A single-input describing function (SIDF) design methodology was developed in this study; coupled with the software constructed in this study, the results of this project provide a comprehensive tool for design and integration of nonlinear control systems.

Wie, Bong↗

Aeroassist vehicle requirements for a Mars Rover/Sample Return Mission

A three degree-of-freedom computer simulation has been developed to perform Martian aeroassist trajectories using the HYPAS guidance algorithm. This simulator was used to perform a parametric study at the Johnson Space Center of various low L/D vehicles and their performance with the inclusion of vehicle and atmospheric dispersions. The ultimate goal is to define an extreme (minimum L/D) aeroassist configuration for the Mars Rover/Sample Return Mission to compare with the previously defined biconic aeroshell. The study shows that a raked cone vehicle with L/D betweeen 0.3 and 0.6 will perform adequately in the Martian environment in the presence of dispersions. Average apoapsis error for the 0.6 L/D vehicle was 11.9 km (6.4 nm) above the 2000 km target which compares fairly well with an error of 3.5 km (1.9 nm) for the 1.5 L/D biconic vehicle. The study concluded that the low L/D raked configuration warrants further study which could include stability analysis as well as the inclusion of density shears and dynamic atmospheric variations.

Meyerson, Robert E.↗

Mach number effects on transonic aeroelastic forces and flutter characteristics

Transonic aeroelastic stability analysis and flutter calculations are presented for a generic transport-type wing based on the use of the CAP-TSD (Computational Aeroelasticity Program - Transonic Small Disturbance) finite-difference code. The CAP-TSD code was recently developed for transonic unsteady aerodynamic and aeroelastic analysis of complete aircraft configurations. A binary aeroelastic system consisting of simple bending and torsion modes was used to study aeroelastic behavior at transonic speeds. Generalized aerodynamic forces are presented for a wide range of Mach number and reduced frequency. Aeroelastic characteristics are presented for variations in freestream Mach number, mass ratio, and bending-torsion frequency ratio. Flutter boundaries are presented which have two transonic dips in flutter speed. The first dip is the usual transonic dip involving a bending-dominated flutter mode. The second dip is characterized by a single degree-of-freedom torsion oscillation. These aeroelastic results are physically interpreted and shown to be related to the steady state shock location and changes in generalized aerodynamic forces due to freestream Mach number.

Mohr, Ross W.↗

Electromagnetic-capillary instabilities of a hollow liquid cylinder - Production of spherical shells under microgravity conditions

An electrical device is proposed for manufacturing spherical shells out of hollow metallic cylinders in a microgravity environment. Such a cylinder is melted by passing a strong axial current through it. The resulting liquid column is unstable to axisymmetric disturbances and breaks up to form hollow spheres after solidification. The stability analysis presented in this paper, which is based on an inviscid magnetohydrodynamic formulation, shows that the size of the spheres may be controlled by varying the strength of the current passed through the column.

Chow, C.-Y.↗

Rapid slewing of the orbiting Spacecraft Control Laboratory Experiment (SCOLE) using LQR techniques

The rotational equations of motion, describing the dynamics of the (rigidized) proposed orbiting Spacecraft Control Laboratory Experiment (SCOLE) during the station keeping phase, are derived using the Eulerian formulation. When the attitude angles (roll, pitch, and yaw) are assumed small, a stability analysis is conducted for the system. It is seen that the pitch equation decouples from the roll and yaw equations when the interface between the mast on the reflector is not offset or the offset is only along the Shuttle roll axis. When a second offset is introduced along the pitch axis of the system and when the gravity-gradient torques are present in the dynamics, the system assumes a new equilibrium position. The linear regulator theory is used to derive a control law for the linear model of the rigidized SCOLE. This law is applied to the nonlinear model of the same configuration of the system and preliminary single axis slewing maneuvers (20 deg amplitude) are simulated.

Diarra, Cheick M.↗

CONDOR: Long endurance high altitude vehicle, volume 5

The results of a design study resulting in the proposed CONDOR aircraft are presented. The basic requirements are for the aircraft to maintain continuous altitude at or above 45,000 feet for at least a 3-day mission, be able to comfortably support a two-man crew during this period with their field of vision not obstructed to a significant degree, carry a payload of 200 pounds, and provide a power supply to the payload of 2000 watts. The take-off and landing distances must be below 5000. feet, and time to reach cruise altitude must not exceed 3 hours. The subjects discussed are configuration selection, structural analysis, stability and control, crew and payload accomodations, and economic estimates.

Andrews, L. Cullen↗

A genuinely multi-dimensional upwind cell-vertex scheme for the Euler equations

The solution of the two-dimensional Euler equations is based on the two-dimensional linear convection equation and the Euler-equation decomposition developed by Hirsch et al. The scheme is genuinely two-dimensional. At each iteration, the data are locally decomposed into four variables, allowing convection in appropriate directions. This is done via a cell-vertex scheme with a downwind-weighted distribution step. The scheme is conservative, and third-order accurate in space. The derivation and stability analysis of the scheme for the convection equation, and the derivation of the extension to the Euler equations are given. Preconditioning techniques based on local values of the convection speeds are discussed. The scheme for the Euler equations is applied to two channel-flow problems. It is shown to converge rapidly to a solution that agrees well with that of a third-order upwind solver.

Powell, Kenneth G.↗

A mirror instability associated with newly created ions in a moving plasma

Using a plasma model in which the ambient magnetic field is parallel to the z axis and the wave vector, an instability that resembles the usual hydromagnetic mirror instability is demonstrated. The instability is caused by freshly created ions in a moving plasma; the source of its free energy is associated with the ring distribution of the newly created ions, resulting in a high ion kinetic temperature in the direction transverse to the ambient magnetic field. The results of a stability analysis indicate that this instability can lead to the amplification of magnetosonic waves.

Wu, C. S.↗

The possible role of meridional flows in suppressing magnetic buoyancy

The equation of motion for a toroidal flux ring in a stellar convective envelope is derived, and the equilibrium of such a ring is considered. Necessary conditions for the stability of toroidal flux rings are derived, and results of stability calculations for a particular model of the meridional flow are presented. The motions of the flux rings when the rings are far from their equilibrium position or when equilibrium does not exist are considered. The results confirm the linear stability analysis, and show that in the absence of stable equilibrium, the rings move toward the solar surface along a trajectory which is parallel to the rotation axis. It is expected that viscosity will tend to reduce the rotational velocity difference between the flux ring and its surroundings, thus reducing the Coriolis force and altering the equilibrium. The storage time of toroidal flux rings is estimated, and some implications for the sun are discussed.

Van Ballegooijen, A. A.↗

A delayed action oscillator for ENSO

A simple nonlinear model is proposed for the El Nino/Southern Oscillation (ENSO) phenomenon. Its key feature is the inclusion of oceanic wave transit effects through a negative, delayed feedback. A linear stability analysis and numerical results are presented, showing that the period of the oscillation is typically several times the delay. It is suggested that such an effect can account for the long time scale of ENSO.

Suarez, Max J.↗

A genuinely multi-dimensional upwind cell-vertex scheme for the Euler equations

A scheme of solving the two-dimensional Euler equations is developed. The scheme is genuinely two-dimensional. At each iteration, the data are locally decomposed into four variables, allowing convection in appropriate directions. This is done via a cell-vertex scheme with a downwind-weighted distribution step. The scheme is conservative and third-order accurate in space. The derivation and stability analysis of the scheme for the convection equation, and the derivation of the extension to the Euler equations are given. Preconditioning techniques based on local values of the convection speeds are discussed. The scheme for the Euler equations is applied to two channel-flow problems. It is shown to converge rapidly to a solution that agrees well with that of a third-order upwind solver.

Powell, Kenneth G.↗

Three-dimensional compressible boundary layer calculations to fourth order accuracy on wings and fuselages

Laminar flow control and drag reduction research requires accurate boundary layer solutions as input to the three-dimensional stability analysis procedures currently under development. In support of these major programs, a fourth-order accurate finite difference scheme for solving the three-dimensional, compressible boundary layer equations has been developed and is presented in this paper. The method employs a two-point scheme in the wall normal direction and second order zigzag scheme in the cross flow direction. Accurate procedures to interface with the inviscid results are also presented. The results of applying the procedure to laminar flow on wings and fuselages are presented.

Iyer, Venkit↗

Morphological instabilities in directional solidification of a binary alloy - End effects

This paper considers the unidirectional solidification of a binary alloy for which the liquid and solid phases are bounded by endwalls. In order to account for the transport of latent heat and solute, thermal and solutal boundary layers must be placed at the solidifying interface. Further, under the assumption of fixed temperature gradients, the presence of the endwalls leads to a velocity of solidification that decreases with time, and hence to an unsteady basic state having a planar interface. From a stability analysis of this state, a nonlinear long-wave evolution equation of Sivashinsky type is derived, with modified coefficients, that shows how the onset of cellular structure is delayed by the presence of endwalls.

Young, Gerald W.↗

Buoyancy effects on morphological instability during directional solidification

The onset of morphological instability during the directional solidification of a single-phase binary alloy at constant velocity vertically upwards is treated by a linear stability analysis. The case in which a heavier solute is rejected at the solidifying interface is considered, and the effect of natural convection on the critical concentration for the onset of instability is studied. For tin containing lead, a small destabilization of the system at low growth velocities, and a large increase in the wavelength of the instability at the onset are found. Calculations show that the destabilization is enhanced as the variation of density with solute concentration is reduced, and in the limit of neutrally-dense solute, there is a long wavelength instability for which the critical solute concentration is several orders of magnitude lower than that predicted by the Mullins and Sekerka (1964) analysis in the absence of convection. For the neutrally-dense solute, a simplified analysis indicates the roles played by the interface deformation and thermal convection in promoting the instability. In particular, the destabilization is very sensitive to the ratio of crystal and melt thermal conductivities.

Coriell, S. R.↗

NASA supercritical laminar flow control airfoil experiment

The design and goals of experimental investigations of supercritical LFC airfoils conducted in the NASA Langley 8-ft Transonic Pressure Tunnel beginning in March 1982 are reviewed. Topics addressed include laminarization aspects; flow-quality requirements; simulation of flight parameters; the setup of screens, honeycomb, and sonic throat; the design cycle; theoretical pressure distributions and shock-free limits; drag divergence and stability analysis; and the LFC suction system. Consideration is given to the LFC airfoil model, the air-flow control system, airfoil-surface instrumentation, liner design and hardware, and test options. Extensive diagrams, drawings, graphs, photographs, and tables of numerical data are provided.

Harvey, W. D.↗