Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Structure and Thermodynamic Stability of Zeolitic Imidazolate Framework Surfaces

Extensive efforts over the last several decades have focused on the possibility of “crystal engineering” metal–organic framework (MOF) materials with bulk properties tailored toward specific applications. However, beyond their bulk structure, MOF interfaces and surfaces can also play an important role in governing the materials properties relevant to many applications, including both interfacial mass and/or charge transport. We presently examine the diversity of stable surface structures/terminations of zeolitic imidazolate frameworks (ZIFs), a subclass of MOFs, under a variety of conditions that are characteristic of either gas-phase, “post-synthetic” conditions (relevant to many MOF applications) or solution-phase conditions (typical of those used during MOF synthesis). We construct surface phase diagrams to predict the most stable ZIF surface terminations as a function of external parameters (including temperature, adsorbate pressures, and pH), making explicit comparison against prior experimental observations, when possible. Overall, we find that the resulting phase diagrams can be used to explain the results of prior experimental studies of ZIF terminations across a variety of conditions and provide important insights into the factors that govern the structure of ZIF interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theoretical study of stability and electronic structure of Li(Mg,Zn)N alloys: A candidate for solid state lighting

Using selective chemical mutation, we propose and investigate the electronic structure of an alloy with the potential to fill the green gap left open by existing InGaN based emission devices. The small mismatch between LiMgN and LiZnN, along with electronic band gaps spanning the visible range, makes them good candidates. Calculations are performed using a first-principles band structure method, with the special quasirandom structure approach employed to generate the random alloys. Comparison of LiMgN and LiZnN with their binary nitride analogs is made, and the energetic and electronic effects of alloy ordering are investigated. These alloys exhibit negative mixing enthalpies atypical of traditional binary nitride systems, which is explained in terms of the low lattice strain and the chemical bonding effects of the interstitial Li ions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Coverage-dependent structures and thermodynamic stability of intercalated Gd layers beneath buffer-layer graphene on SiC(0001)

Electronic properties of two-dimensional (2D) materials are strongly influenced by their atomic arrangements, making the theoretically-aided characterization of experimentally-synthesized 2D structures crucial. Using first-principles density functional theory, we analyze nearly 200 configurations of intercalated Gd layers beneath buffer-layer graphene on SiC(0001) over a Gd coverage range of 0.01 < θ < 1.2. By fully relaxing selectively-constructed configurations at each coverage within a large, low-strain supercell, we determine the coverage dependence of the chemical potential for intercalated Gd structures. Thermodynamically-preferred configurations below θ ≈ 0.8 form single-atom-thick monolayers, while 3D-like or multilayer structures emerge beyond θ ≈ 0.9. Most structures are amorphous-like, including the configuration at the chemical potential minimum around θ ≈ 0.4. In contrast, a strongly stretched Gd(0001)-like monolayer at θ = 1/3 and a nearly perfect Gd(0001) monolayer at θ = 1 are significantly less favorable with 0.16 eV and 0.82 eV higher chemical potentials above the minimum, respectively. Furthermore, the graphene layer decoupled by intercalated Gd near the chemical potential minimum is significantly flatter compared to its morphology above intercalated 3D structures at higher coverages and nearly isolated Gd atoms in the lowest coverage region. In conclusion, these findings align with our experimental results and underscore the need for further research on this unique intercalated system, which holds significant potential for diverse applications.

36 MATERIALS SCIENCE↗

Ti{sub 3}GaC{sub 2} and Ti{sub 3}InC{sub 2}: First bulk synthesis, DFT stability calculations and structural systematics

A simple methodology for identifying possible higher order M{sub n+1}AX{sub n} phases (n≥2) from the chemical characteristics of known phases was developed. The method was used to identify two potential M{sub 3}AC{sub 2} phases Ti{sub 3}GaC{sub 2} and Ti{sub 3}InC{sub 2}. After verifying that the n=1 MAX phases in these systems could be synthesised in bulk using a simple pressureless reactive sintering process, the new phases were synthesised using the same method. DFT calculations were used to test the thermodynamic stability of the new phases against the known competing phases within the same ternary systems. Both were found to be stable although Ti{sub 3}InC{sub 2} only marginally so. Crystal structure refinements and comparison to other MAX phases revealed a linear increase in the c-axis length as a function of the atomic radius of the A element. - Highlights: • Chemical systematics were used to highlight a search window for new MAX phases. • Two new higher order MAX phases, Ti{sub 3}InC{sub 2} and Ti{sub 3}GaC{sub 2}, were synthesised. • Pressureless reactive sintering was effective in producing bulk material. • DFT calculations indicate that the new phases are stable.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Constraining dark energy through the stability of cosmic structures

For a general dark-energy equation of state, we estimate the maximum possible radius of massive structures that are not destabilized by the acceleration of the cosmological expansion. A comparison with known stable structures constrains the equation of state. The robustness of the constraint can be enhanced through the accumulation of additional astrophysical data and a better understanding of the dynamics of bound cosmic structures.

79 ASTRONOMY AND ASTROPHYSICS↗

Long-Term Structural and Chemical Stability of Carbon Electrodes in Vanadium Redox Flow Battery

Predicting the performance decay in carbon electrodes is critical to maximizing the longevity of redox flow battery (RFB) systems. This study investigates the effect of long-term cycling (over 8000 cycles) on the structural and chemical evolution of carbon electrodes. We find that the microstructural aspects such as graphitic stacking order and interlayer spacing along with overall morphological construct remains largely unchanged even after the prolonged cycling process. Conversely, significant changes in surface chemistry such as evolution of functional groups and point defects are evident from our combined multimodal spectroscopic and computational analysis. The XPS and FTIR analysis reveals chemical absorption of chloride counter anions at point defects within graphitic surface. Additionally, our results suggest that vanadium cation plays an important role in counter anion-carbon surface interaction and subsequently the surface chemistry evolutions. Our findings provide insights about surface chemical evolution that is critical for predicting electrode performance and longevity of RFB.

Modachur Sivakumar, Bhuvaneswari↗

Comparative analysis of cobalt oxide nanoisland stability and edge structures on three related noble metal surfaces: Au(111), Pt(111) and Ag(111)

Here, metal oxide nanostructures and thin films grown on metallic substrates have attracted strong attention as model catalysts and as interesting inverse catalyst systems in their own right. In this study, we investigate the role of metal support in the growth and stabilization of cobalt oxide nanostructures on the three related (111) surfaces of Au, Pt and Ag, as investigated by means of high-resolution scanning tunneling microscopy and DFT calculations. All three substrates promote the growth of crystalline CoO x (x = 1–2) islands under oxidative conditions, but we find several noteworthy differences in the occurrence and stabilization of four distinct cobalt oxide island phases: Co–O bilayers, O–Co–O trilayers, Co–O–Co–O double bilayers and O–Co–O–Co–O multilayers. Using atom-resolved images combined with analysis of defect lines in bilayer islands on Au and Pt, we furthermore unambiguously determine the edge structure. Interestingly, the island shape and abundances of edge types in bilayers change radically from mixed Co/O edge terminations on Au(111) to a predominance of Co terminated edges (~91 %) on Pt(111) which is especially interesting since the Co metal edges are expected to host the most active sites for water dissociation.

36 MATERIALS SCIENCE↗

An X-ray and Neutron Scattering Study of the Formation of Core-Shell Type Polyoxometalates

A typical type of core-shell polyoxometalates can be obtained through the Keggin-type polyoxometalatetemplated growth of a layer of spherical shell structure of {Mo72Fe30}. Small angle X-ray scattering is used to study the structural features and stability of the core-shell structures in aqueous solutions. Timeresolved small angle X-ray scattering is applied to monitor the synthetic reactions and a three-stage formation mechanism is proposed to describe the synthesis of the core-shell polyoxometalates based on the monitoring results. New protocols have been developed by fitting the X-ray data with customed physical models, which provide more convincing, objective, and completed data interpretation. Quasielastic and inelastic neutron scattering are used to probe the dynamics of water molecules in the core-shell structures and two different types of water molecules, the confined and structured water, are observed. These water molecules play an important role in bridging core and shell structures and stabilizing the cluster structures.

Yin, Panchao↗

Nuclear Structure far from stability at the N = 50 Shell Closure

Medium and high spin states of the nuclei close to the N = 50 shell closure are investigated using deep inelastic and multi-nucleon transfer reactions. New excited states of the nuclei {sup 81}Ga, {sup 82}Ge and {sup 83}As at N 50 shell closure have been identified by means of the {sup 82}Se+{sup 238}U reaction. Gamma rays have been acquired using the PRISMA-CLARA setup of the Laboratori Nazionali di Legnaro, Italy (LNL)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Determination of the oxidative stability of perfluoropolyalkyl ethers and correlation with chemical structure

The oxidative stabilities of several perfluoropolyalkyl ethers (PFPAE) with related chemical structures were determined by thermal gravimetric analysis and correlated with their chemical structures. These results show that oxidative stability increases as the number of difluoroformal groups decreases and as trifluoromethyl substituents are added. They are also consistent with a recently proposed intramolecular disproportionation reaction mechanism involving coordination of successive ether oxygens to a Lewis acid. Since polytetrafluoroethylene contains no oxygen, it provides an indication of the upper limit to oxidative stability of PFPAE fluids. These results also show that oxidative decomposition of PFPAE fluids requires the presence of an active metal as well as air. Consequently, it may be possible to minimize decomposition and thus improve oxidative stability by passivating reactive metal surfaces.

Helmick, Larry S.↗

Final Technical Report

This research consisted of a theoretical investigation of the properties of surface-based nanostructures, having as a main goal the deeper understanding of the atomic-scale mechanisms responsible for the formation and stability of such structures. This understanding will lead to the design of improved systems for applications in diverse areas such as novel electronic devices, sensors, field-effect transistors, substrates with enhanced hydro-phobic (water repelling) or hydro-philic (water absorbing) behavior for coatings of various surfaces used in bioengineering, flexible displays, organic photovoltaics, etc. The research consisted of developing new theoretical methodologies and applying them to a wide range of interesting physical systems. Highlights of the new methodologies include techniques for bridging different scales, from the quantum-mechanical electronic level to the meso-scopic level of large molecular structures such as DNA, carbon nanotubes and two-dimensional assemblies of organic molecules. These methodologies were successfully applied to investigate interactions between systems that are large on the atomic scale (reaching the scale of microns in length or milliseconds in time), but still incorporating all the essential elements of the atomic-scale structure. While the research performed here did not address applications directly, the implications of its finding are important in guiding experimental searches and in coming up with novel solutions to important problems. In this sense, the results of this work can be incorporated in the design of many useful applications. Specifically, in addition to elucidating important physical principles on how nano-structures are stabilized on surfaces, we have used our theoretical investigations to make predictions for useful applications in the following fields: a) we proposed new types of nanotubes that can overcome the limitations of the carbon nanotubes whose properties depend sensitively on the structure which cannot be controlled experimentally; b) we showed how carbon nanotubes can be employed in optical determination of the DNA base sequence, an exciting application for ultra-fast DNA sequencing; c) we proposed a nano-structure (titanium dioxide nano-wire) based design for organic photovoltaics using natural dyes, and showed that it will be an efficient system for the absorption of light and the charge transfer from the dye to the wire.

36 MATERIALS SCIENCE↗

NaAlF{sub 4}: Preparation, crystal structure and thermal stability

The compound NaAlF{sub 4} has been obtained in the form of thin fibrous crystals or fine colorless powder by condensation at 18 deg. C of vapors arising over chiolite Na{sub 5}Al{sub 3}F{sub 14} or NaCaAlF{sub 6}, heated up to 800 deg. C. Thermal stability has been investigated by the methods of thermal analysis and high temperature X-ray diffraction. When heated in air, NaAlF{sub 4} is stable up to 390-400 deg. C, then there is an exothermal solid state decay into Na{sub 5}Al{sub 3}F{sub 14}(s) and AlF{sub 3}(s). At higher temperature Na{sub 5}Al{sub 3}F{sub 14}(s) decays into Na{sub 3}AlF{sub 6}(s) and NaAlF{sub 4}(g). The crystal structure (space group Cmcm, a=3.6124(1) A, b=14.9469(7) A, c=5.2617(3) A, V=284.10 A{sup 3}) has been determined by X-ray powder diffraction method. In the crystal structure of NaAlF{sub 4} the octahedrons [AlF{sub 6}] are joined through vertices and form corrugated layers, sodium ion layers being located between them. The distances between the atoms of Al-F are in the range 1.791-1.814 A, and those for Na...F are in the range 2.297-2.439 A. In spite of limited thermal stability of the crystal form, the compound NaAlF{sub 4} is the main component of the gas mixture over solid and molten salts in the ternary system NaF-AlF{sub 3}-CaF{sub 2} and participates in chemical transformations between the phases at high temperature. - Graphical abstract: The compound NaAlF{sub 4} was for the first time described 55 years ago, but until now it was not properly studied. Meantime the phase is responsible for the most low-melting part of the NaF-AlF{sub 3} system, which is the great importance for the aluminum production. The lack of information about NaAlF{sub 4} is due to narrow interval of stability which is close to liquid part of the system.

36 MATERIALS SCIENCE↗

Modeling of canonical and C2'- O -thiophenylmethyl modified hexamers of RNA. Insights into the nature of structural changes and thermal stability

Modifying the ribose ring or the nucleobase within oligonucleotides of RNA is a strategy that has regained attention due to its potential to provide chemical stability, increase affinity towards a target, or introduce groups with bioorthogonal reactivity, among other applications. However introducing groups via synthetic routes can be a daunting process and may result in unexpected physical properties and structural variations. In addition, characterizing the effects of a modification within an oligonucleotide can be time consuming and expensive, e.g., NMR, crystallography. Thus the development of models that are accurate, reasonably priced and carried out over short periods of time is essential to the development of this field. In this paper we report on the development and validation of computational models that explain the nature of the structural and stability changes induced by the presence of a C2'-O-methylthiophene group at various positions within duplexes conformed by two 6-mers of modified RNA as well as random coils containing the same modification(s). Through analysis of the obtained models it was concluded that the presence of the methylthiophene moiety on two strands of RNA induces a conformational change around the torsion angle (κ°) that leads to lower values in the pseudorotational angle (δ°), thus resulting in an A-form α-helix with shorter distances between phosphates than those in canonical RNA. These results provide a reasonable explanation for the experimental observations, which display the thermal stabilization of the duplexes, and are guiding efforts from our groups to control the structure and function of RNA, i.e., via functionalization of the RNA structure for attaining thermal stability while retaining the structural properties of an A-form duplex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rational positive real approximations for LQG optimal compensators arising in active stabilization of flexible structures

In this paper the approximation problem for a class of optimal compensators for flexible structures is considered. The particular case of a simply supported truss with an offset antenna is dealt with. The nonrational positive real optimal compensator transfer function is determined, and it is proposed that an approximation scheme based on a continued fraction expansion method be used. Comparison with the more popular modal expansion technique is performed in terms of stability margin and parameters sensitivity of the relative approximated closed loop transfer functions.

Desantis, A.↗

Roles of POLD4, smallest subunit of DNA polymerase {delta}, in nuclear structures and genomic stability of human cells

Mammalian DNA polymerase {delta} (pol {delta}) is essential for DNA replication, though the functions of this smallest subunit of POLD4 have been elusive. We investigated pol {delta} activities in vitro and found that it was less active in the absence of POLD4, irrespective of the presence of the accessory protein PCNA. shRNA-mediated reduction of POLD4 resulted in a marked decrease in colony formation activity by Calu6, ACC-LC-319, and PC-10 cells. We also found that POLD4 reduction was associated with an increased population of karyomere-like cells, which may be an indication of DNA replication stress and/or DNA damage. The karyomere-like cells retained an ability to progress through the cell cycle, suggesting that POLD4 reduction induces modest genomic instability, while allowing cells to grow until DNA damage reaches an intolerant level. Our results indicate that POLD4 is required for the in vitro pol {delta} activity, and that it functions in cell proliferation and maintenance of genomic stability of human cells.

60 APPLIED LIFE SCIENCES↗

The (111) Surface of NaAu 2 . Structure, Composition, and Stability

The (111) surface of single-crystal NaAu 2 is a model for catalytically active, powdered NaAu 2 . We prepare and characterize this surface with a broad suite of techniques. Preparation in ultrahigh vacuum consists of the traditional approach of ion bombardment (to remove impurities) and thermal annealing (to restore surface order). Both of these steps cause loss of sodium (Na), and repeated treatments eventually trigger conversion of the surface and near-surface regions to crystalline gold. The bulk has a limited ability to repopulate the surface Na. Under conditions where Na depletion is minimized, electron diffraction patterns are consistent with the bulk-terminated structure, and scanning tunneling microscopy reveals mesa-like features with lateral dimensions of a few tens of nanometers. The tops of the mesas do not possess fine structure characteristic of a periodic lattice, suggesting that the surface layer is disordered under the conditions of these experiments.

36 MATERIALS SCIENCE↗