Effects of lee-surface volume addition on longitudinal aerodynamics of a high-lift-drag-ratio wing-body configuration at Mach 6.0
Volume addition effects on leeward surface of high lift drag ratio winged body at hypersonic speeds
Ashby, G. C., Jr.↗
SEARCH · Search NASA
Results for “surface effects”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Influence of deposition temperature of thermal ALD deposited Al{sub 2}O{sub 3} films on silicon surface passivation
The effect of deposition temperature (T{sub dep}) and subsequent annealing time (t{sub anl}) of atomic layer deposited aluminum oxide (Al{sub 2}O3) films on silicon surface passivation (in terms of surface recombination velocity, SRV) is investigated. The pristine samples (as-deposited) show presence of positive fixed charges, Q{sub F}. The interface defect density (D{sub it}) decreases with increase in T{sub dep} which further decreases with t{sub anl} up to 100s. An effective surface passivation (SRV<8 cm/s) is realized for T{sub dep} ≥ 200 °C. The present investigation suggests that low thermal budget processing provides the same quality of passivation as realized by high thermal budget process (t{sub anl} between 10 to 30 min)
36 MATERIALS SCIENCE↗
A characteristic surface representation of the effects of off-optimum propulsion parameters on low-thrust performance
Solar electric multimission spacecraft design, discussing off-optimum propulsion parameters effects on low thrust performance by characteristic surface representation
Atkins, K. L.↗
The effect of temperature induced surface tension gradients on bubble mechanics
Experiments were conducted to examine in detail the influence of surface tension gradient induced flow, the Marangoni effect. One set of studies provided visual results that demonstrated the occurrence and magnitude of the Marangoni effect. Another portion of the work was directed to bubble force measurements. These studies used in deflection of a very fine cantilevered wire with an attached bubble as a means of measuring force with and without temperature gradients. The experimental force data were found to check existing theoretical predictions reasonably well except for the case where the test fluid had a sizeable vapor pressure. In this situation the thermophoretic force on the bubble was much higher than predicted.
Mcgrew, J. L.↗
Effect of Gravity on Surface Tension
Spectroscopic measurements of liquid-vapor interfaces are made in +/- 1-g environments to note the effect of gravity on surface tension. A slight increase is detected at -1-g0, but is arguably within the uncertainty of the measurement technique. An increased dependence of surface tension on the orientation and magnitude of the gravitational vector is anticipated as the critical point is approached.
Weislogel, M. M.↗
THE INFLUENCE OF GALAXY SURFACE BRIGHTNESS ON THE MASS–METALLICITY RELATION
We study the effect of surface brightness on the mass–metallicity relation using nearby galaxies whose gas content and metallicity profiles are available. Previous studies using fiber spectra indicated that lower surface brightness galaxies have systematically lower metallicities for their stellar mass, but the results were uncertain because of aperture effects. With stellar masses and surface brightnesses measured at Wide-field Infrared Explorer W1 and W2 bands, we re-investigate the surface brightness dependence with spatially resolved metallicity profiles and find similar results. We further demonstrate that the systematical difference cannot be explained by the gas content of galaxies. For two galaxies with similar stellar and gas masses, the one with lower surface brightness tends to have a lower metallicity. Using chemical evolution models, we investigate the inflow and outflow properties of galaxies of different masses and surface brightnesses. We find that, on average, high mass galaxies have lower inflow and outflow rates relative to the star formation rate. On the other hand, galaxies with a lower surface brightness experience stronger inflow than galaxies with a higher surface brightness of a similar mass. The surface brightness effect is more significant for low-mass galaxies. We discuss implications on the different inflow properties between low and high surface brightness galaxies, including star formation efficiency, environment, and mass assembly history.
79 ASTRONOMY AND ASTROPHYSICS↗
Influence of surface roughness, surface damage, and oxide films on emittance
Effect of surface roughness, damage, and films on thermal emission
SURFACE ROUGHNESS EFFECT↗
Effect of polymer properties and adherend surfaces on adhesion
The surface properties associated with good adhesive joints were evaluated in terms of application of adhesive bonding in aerospace technology. The physical and chemical nature was determined of Ti and Al adherend surfaces after various surface treatments, and the effects on fracture surfaces of high temperature aging, and variations in amide, anhydride, and solvent during polymer synthesis. The effects were characterized of (1) high temperature during shear strength testing, (2) fiber-reinforced composites as adherends, (3) acid/base nature of adherends, (4) aluminum powder adhesive filler, and (5) bonding pressure.
Dwight, D. W.↗
Moment tensor analysis of very shallow sources
An issue for moment tensor (MT) inversion of shallow seismic sources is that some components of the Green’s functions have vanishing amplitudes at the free surface, which can result in bias in the MT solution. The effects of the free surface on the stability of the MT method become important as we continue to investigate and improve the capabilities of regional full MT inversion for source–type identification and discrimination. It is important to understand free–surface effects on discriminating shallow explosive sources for nuclear monitoring purposes. It may also be important in natural systems that have very shallow seismicity, such as volcanic and geothermal systems. We examine the effects of the free surface on the MT via synthetic testing and apply the MT–based discrimination method to three quarry blasts from the HUMMING ALBATROSS experiment. These shallow chemical explosions at ~10 m depth and recorded up to several kilometers distance represent rather severe source–station geometry in terms of free–surface effects. We show that the method is capable of recovering a predominantly explosive source mechanism, and the combined waveform and first–motion method enables the unique discrimination of these events. Furthermore, recovering the design yield using seismic moment estimates from MT inversion remains challenging, but we can begin to put error bounds on our moment estimates using the network sensitivity solution technique.
58 GEOSCIENCES↗
An interface capturing scheme for modeling atomization in compressible flows
The study of atomization in supersonic flow is critical to ensuring reliable ignition of scramjet combustors under startup conditions. Numerical methods incorporating surface tension effects have largely focused on the incompressible regime as most atomization applications occur at low Mach numbers. Simulating surface tension effects in compressible flow requires robust numerical methods that can handle discontinuities caused by both shocks and material interfaces with high density ratios. In this work, a shock and interface capturing scheme is developed that uses the Harten–Lax–van Leer–Contact (HLLC) Riemann solver while a Tangent of Hyperbola for INterface Capturing (THINC) interface reconstruction scheme retains the fluid immiscibility condition in the volume fraction and phasic densities in the context of the five equation model. The approach includes the effects of compressibility, surface tension, and molecular viscosity. One and two-dimensional benchmark problems demonstrate the desirable interface sharpening and conservation properties of the approach. Simulations of secondary atomization of a cylindrical water column after its interaction with a shockwave show good qualitative agreement with experimentally observed behavior. Three-dimensional examples of primary atomization of a liquid jet in a Mach 2 crossflow demonstrate the robustness of the method.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
High-Resolution Image Products Acquired from Mid-Sized Uncrewed Aerial Systems for Land–Atmosphere Studies
We assess the viability of deploying commercially available multispectral and thermal imagers designed for integration on small uncrewed aerial systems (sUASs, <25 kg) on a mid-size Group-3-classification UAS (weight: 25–600 kg, maximum altitude: 5486 m MSL, maximum speed: 128 m/s) for the purpose of collecting a higher spatial resolution dataset that can be used for evaluating the surface energy budget and effects of surface heterogeneity on atmospheric processes than those datasets traditionally collected by instrumentation deployed on satellites and eddy covariance towers. A MicaSense Altum multispectral imager was deployed on two very similar mid-sized UASs operated by the Atmospheric Radiation Measurement (ARM) Aviation Facility. This paper evaluates the effects of flight on imaging systems mounted on UASs flying at higher altitudes and faster speeds for extended durations. We assess optimal calibration methods, acquisition rates, and flight plans for maximizing land surface area measurements. We developed, in-house, an automated workflow to correct the raw image frames and produce final data products, which we assess against known spectral ground targets and independent sources. We intend this manuscript to be used as a reference for collecting similar datasets in the future and for the datasets described within this manuscript to be used as launching points for future research.
47 OTHER INSTRUMENTATION↗
A highly efficient atomically thin curved PdIr bimetallene electrocatalyst
Abstract The multi-metallene with an ultrahigh surface area has great potential in precise tuning of surface heterogeneous d-electronic correlation by surface strain effect for the distinctive surface electronic structure, which is a brand new class of promising 2D electrocatalyst for sustainable energy device application. However, achieving such an atomically thin multi-metallene still presents a great challenge. Herein, we present a new synthetic method for an atomic-level palladium-iridium (PdIr) bimetallene with an average thickness of only ∼1.0 nm for achieving superior catalysis in the hydrogen evolution reaction (HER) and the formic acid oxidation reaction (FAOR). The curved PdIr bimetallene presents a top-ranked high electrochemical active area of 127.5 ± 10.8 m2 gPd+Ir−1 in the reported noble alloy materials, and exhibits a very low overpotential, ultrahigh activity and improved stability for HER and FAOR. DFT calculation reveals that the PdIr bimetallene herein has a unique lattice tangential strain, which can induce surface distortion while concurrently creating a variety of concave-convex featured micro-active regions formed by variously coordinated Pd sites agglomeration. Such a strong strain effect correlates the abnormal on-site active 4d10-t2g-orbital Coulomb correlation potential and directly elevates orbital-electronegativity exposure within these active regions, resulting in a preeminent barrier-free energetic path for significant enhancement of FAOR and HER catalytic performance.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
The clear-sky greenhouse effect sensitivity to a sea surface temperature change
The clear-sky greenhouse effect response to a sea surface temperature (SST or Ts) change is studied using outgoing clear-sky longwave radiation measurements from the Earth Radiation Budget Experiment. Considering geographical distributions for July 1987, the relation between the SST, the greenhouse effect (defined as the outgoing infrared flux trapped by atmospheric gases), and the precipitable water vapor content (W), estimated by the Special Sensor Microwave Imager, is analyzed first. A fairly linear relation between W and the normalized greenhouse effect g, is found. On the contrary, the SST dependence of both W and g exhibits nonlinearities with, especially, a large increase for SST above 25 C. This enhanced sensitivity of g and W can be interpreted in part by a corresponding large increase of atmospheric water vapor content related to the transition from subtropical dry regions to equatorial moist regions. Using two years of data (1985 and 1986), the normalized greenhouse effect sensitivity to the sea surface temperature is computed from the interannual variation of monthly mean values.
Duvel, J. PH.↗
Measurement of total hemispherical emissivity of contaminated mirror surfaces
The effects of dust contamination on the total hemispherical emissivity (THE) of a 1.5-inch-diameter Al/MgF2-coated telescope mirror are investigated experimentally. The THE is determined by means of cooling-rate measurements in the temperature range 10-14.5 C in a vacuum of 100 ntorr or better. Photographs and drawings of the experimental setup are provided, and results for 11 dust levels are presented in tables and graphs. It is shown that dust has a significant effect on THE, but the experimental losses are only about half those predicted for perfectly black dust in perfect thermal contact with the mirror surface.
Facey, T. A.↗
Dissociated Airflow Effects During Plasma-Arc Testing
Program computes heating rates and surface friction effects. COLDARC predicts heating rate and surface friction on test article during plasmaarc testing. Uses simplified frozen-flow model to represent dissociated airflow and predict heat flux and surface friction, including effects of retarded atomic recombination from test facility data. COLDARC written in FORTRAN IV.
Miller, B. A.↗
Steady state growth and segregation under zero gravity: InSb
It was established that ideal diffusion controlled steady state conditions, never accomplished on earth, were achieved during the growth of Te-doped InSb crystals in Skylab. Surface tension effects were found to establish non-wetting conditions under which free surface solidification took place in confined geometry. It was further found that, under forced contact conditions, surface tension effects led to the formation of surface ridges (not previously observed on earth) which isolated the growth system from its container. In addition, it was possible for the first time to identify unambiguously: the origin of segregation discontinuities associated with facet growth, the mode of nucleation and propagation or rotational twin boundaries, and the specific effect of mechanical-shock perturbations on segregation. The results obtained prove the advantageous conditions provided by outer space. Thus, fundamental data on solidification thought to be unattainable because of gravity induced interference on earth are now within reach.
Witt, A. F.↗
Effects of nature of cooling surface on radiator performance
This report discusses the effects of roughness, smoothness, and cleanness of cooling surfaces on the performance of aeronautic radiators, as shown by experimental work, with different conditions of surface, on (1) heat transfer from a single brass tube and from a radiator; (2) pressure drop in an air stream in a single brass tube and in a radiator; (3) head resistance of a radiator; and (4) flow of air through a radiator. It is shown that while smooth surfaces are better than rough, the surfaces usually found in commercial radiators do not differ enough to show marked effect on performance, provided the surfaces are kept clean.
Parsons, S R↗
Effective buoyancy at the surface and aloft
Here, it is shown here that a wide, buoyant parcel of air at the surface accelerates far less rapidly than it does aloft. In particular, analytical formulae are derived for the effective buoyancy (i.e. the net vertical acceleration due to parcel buoyancy and environmental response) of idealized cylinders of diameter D and height H, located in free space and at the surface. These formulae quantify the decrease of effective buoyancy with increasing aspect ratio D/H, and show that this effect is more pronounced for surface cylinders, especially when D/H > 1. We gain intuition for these results by considering the pressure fields generated by these buoyant parcels, and we test our results with large-eddy simulations. Our formulae can inform parametrizations of the vertical velocity equation for clouds, and also provide a quantitative map of the 'grey zone' in numerical modelling between hydrostatic and non-hydrostatic regimes.
58 GEOSCIENCES↗