Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface morphologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Au-free low-temperature ohmic contacts for AlGaN/AlN/GaN heterostructures

We report Au-free, Ti/Al/Ta ohmic contact on the AlGaN/AlN/GaN heterostructure using low annealing temperature is studied in this paper. With SiCl 4 plasma treatment at the recess-etched contact region, a low contact resistance of 0.52 Ω mm and a low sheet resistance of 373 Ω/sq are achieved after annealing at 550 °C for 30 s. The low annealing temperature also leads to better surface morphology. Furthermore, AlGaN/AlN/GaN high-electron-mobility transistors (HEMTs) are fabricated with the 550 °C, 30 s annealed Ti/Al/Ta ohmic contacts, and a maximum transconductance of 123 mS/mm and a maximum drain current of 510 mA/mm are obtained for a gate length of 4 μm. Based on Silvaco's Atlas device simulation framework, a scaled-down device with a short gate length of 1 μm would produce a maximum drain current density of 815 mA/mm. It indicates that the direct current performance of the HEMTs with the ohmic metal proposed in this work is considerably better than that with Au-based ohmic contact.

42 ENGINEERING↗

Synthesis and characterization of electron beam irradiation-induced damage in polycrystalline metal thin films

High-energy physics research, industrial sterilizing, and material processing depend extensively on electron beam accelerators. Exit windows are crucial components of such electron accelerator systems, maintaining vacuum integrity inside the machine while providing mechanical strength, thermal stability, and radiation resistance at the beam-target interface. In this study, thin metallic films of Ni, Ti, Cr, and V were explored for use in electron beam exit windows, and their properties were compared with the properties of their bulk counterparts. Simulation results of metal foils predicted Ti to exhibit less beam power dissipation compared to Ni. However, Ni possesses superior mechanical and structural properties compared to Ti. The performance of these films under electron beam irradiation was examined by depositing thin layers of these films on silicon and metallic substrates using magnetron sputtering and exposing them to e-beam irradiation in a controlled setup. The deposited films were subjected to a dose of approximately 66 kGy at a beam energy of 10 MeV and characterized prior to and postexposure to the beam using field emission scanning electron microscopy, atomic force microscopy, x-ray diffraction (XRD), and nanoindentation. Particular emphasis was given to characteristics like the grain structure, surface morphology, dislocation density, and hardness. XRD patterns revealed irradiation-induced changes in peak intensities, while the crystallinity remained largely unchanged. Nanoindentation results showed that the pristine and irradiated Ti and Ni films were twice as hard when compared to bulk Ti and Ni samples, regardless of the substrate type used (Si or bulk Ti, or Ni). These results emphasize the superior mechanical properties of thin metal films compared to their bulk counterparts. In conclusion, this study advances the optimization of thin film materials for robust and efficient e-beam applications, ensuring improved durability and operational reliability.

AFM↗

From binary to quinary: The rationale and development of GaInAsSbBi for mid- and long-wave infrared sensing applications

Given the added complexity in flux calibration and composition evaluation inherent to quinary alloy growth, what motivates compounding the challenges of III–V-Bi growth with the goal of producing a quinary alloy of GaInAsSbBi for mid- and long-wave infrared sensing applications? Each elemental constituent provides some additional design freedom to achieve the ultimate goal of producing a lattice-matched, bulk random alloy mid-wave infrared III–V material with smooth surface morphology and high optoelectronic quality to enable high performance elevated operating temperatures. Here, this paper reviews the evolution of Bi-containing semiconductor research, focusing on mid- and long-wave infrared materials and highlighting key research findings that motivated the decisions to accept the added complexity in going from binaries like InAs or InSb, to InAsBi, to InAsSbBi, and, finally, to GaInAsSbBi to meet the performance demands of advanced infrared sensing applications.

Webster, Preston T. [Air Force Research Laboratory↗

Hierarchical Multi-Scale Approach To Validation and Uncertainty Quantification of Hyper-Spectral Image Modeling

Validating predictive models and quantifying uncertainties inherent in the modeling process is a critical component of the HARD Solids Venture program [1]. Our current research focuses on validating physics-based models predicting the optical properties of solid materials for arbitrary surface morphologies and characterizing the uncertainties in these models. We employ a systematic and hierarchical approach by designing physical experiments and comparing the experimental results with the outputs of computational predictive models. We illustrate this approach through an example comparing a micro-scale forward model to an idealized solid-material system and then propagating the results through a system model to the sensor level. Our efforts should enhance detection reliability of the hyper-spectral imaging technique and the confidence in model utilization and model outputs by users and stakeholders.

Engel, David W.↗

High absorptivity nanotextured powders for additive manufacturing

The widespread application of metal additive manufacturing (AM) is limited by the ability to control the complex interactions between the energy source and the feedstock material. Here, we develop a generalizable process to introduce nanoscale grooves to the surface of metal powders which increases the powder absorptivity by up to 70% during laser powder bed fusion. Absorptivity enhancements in copper, copper-silver, and tungsten enable energy-efficient manufacturing, with printing of pure copper at relative densities up to 92% using laser energy densities as low as 83 joules per cubic millimeter. Simulations show that the enhanced powder absorptivity results from plasmon-enabled light concentration in nanoscale grooves combined with multiple scattering events. The approach taken here demonstrates a general method to enhance the absorptivity and printability of reflective and refractory metal powders by changing the surface morphology of the feedstock without altering its composition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Strain mapping of three-dimensionally structured two-dimensional materials

Strain plays a crucial role in tuning materials’ properties, influencing their optical, electrical, and chemical performances. In two-dimensional (2D) materials, applied stress often induces out-of-plane deformation, resulting in a more intricate three-dimensional (3D) topography, where mapping the strain remains a challenge due to the limitations of conventional characterization techniques. In this work, we introduce BRIGHT (Bragg-Rod Informed, Gradient-based Height-mapping Technique), an integrated method for reconstructing both the topography and planar strain profile of 3D-structured 2D materials using nanobeam four-dimensional scanning transmission electron microscopy (4D-STEM). We apply BRIGHT to a MoS2-MoSe2 transition metal dichalcogenide (TMD) lateral heterojunctions exhibiting built-in strain and out-of-plane ripples and show that varying heterojunction widths lead to distinct surface morphologies and corresponding changes in the planar strain distribution. These results establish a foundation for more effective strain engineering in 2D materials by accounting for out-of-plane structural features, thereby enabling more precise control of strain-dependent properties.

Mireles, Adan [Rice Univ., Houston, TX (United Sta↗

Effect of Laser Irradiation on the PTCR Behavior of Semiconducting Barium Strontium Titanate Ceramics

This paper examines the effect of pulsed laser irradiation on the electrical properties of n-type semiconductor ferroelectric ceramics (based on a (Ba,Sr)TiO{sub 3} solid solution) with a planar contact configuration. The elemental compositions and surface morphologies of the material before and after laser irradiation are compared using scanning electron microscopy data. In the framework of the well-known Heywang model for the positive temperature coefficient of resistance effect, we calculate the resistance of the material as a function of temperature for the paraelectric phase and determine parameters of grain boundaries that ensure good agreement between the experimental data and theoretical curves.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Preparation and Characterization of Eu{sup 3+}-Doped Transparent Oxyfluoride Glasses

A process has been proposed for the preparation of oxyfluoride glasses based on the SiO{sub 2}–B{sub 2}O{sub 3}–Bi{sub 2}O{sub 3}–ZnO–CaF{sub 2} system at various ratios of batch components, and transparent glasses have been obtained at a temperature below 1000°C. According to X-ray diffraction data, all of the glasses are X-ray amorphous. The surface morphology of the glasses has been examined and their glass transition temperatures have been determined. Their local structure has been studied by IR spectroscopy and it has been shown that, independent of composition, the glasses contain complex polyborate anions formed by [BO{sub 3}] and [BO{sub 4}] groups. Bismuth is incorporated into the glass network to form Bi–O–Si bonds and [BiO{sub 6}] network-formers.

36 MATERIALS SCIENCE↗

On the laser lift-off of lightly doped micrometer-thick n-GaN films from substrates via the absorption of IR radiation in sapphire

The intense absorption of CO{sub 2} laser radiation in sapphire is used to separate GaN films from GaN templates on sapphire. Scanning of the sapphire substrate by the laser leads to the thermal dissociation of GaN at the GaN/sapphire interface and to the detachment of GaN films from the sapphire. The threshold density of the laser energy at which n-GaN started to dissociate is 1.6 ± 0.5 J/cm{sup 2}. The mechanical-stress distribution and the surface morphology of GaN films and sapphire substrates before and after laser lift-off are studied by Raman spectroscopy, atomic-force microscopy, and scanning electron microscopy. A vertical Schottky diode with a forward current density of 100 A/cm{sup 2} at a voltage of 2 V and a maximum reverse voltage of 150 V is fabricated on the basis of a 9-μm-thick detached n-GaN film.

36 MATERIALS SCIENCE↗

Terahertz-radiation generation in low-temperature InGaAs epitaxial films on (100) and (411) InP substrates

The spectrum and waveforms of broadband terahertz-radiation pulses generated by low-temperature In{sub 0.53}Ga{sub 0.47}As epitaxial films under femtosecond laser pumping are investigated by terahertz time-resolved spectroscopy. The In{sub 0.53}Ga{sub 0.47}As films are fabricated by molecular-beam epitaxy at a temperature of 200°C under different arsenic pressures on (100)-oriented InP substrates and, for the first time, on (411)A InP substrates. The surface morphology of the samples is studied by atomic-force microscopy and the structural quality is established by high-resolution X-ray diffraction analysis. It is found that the amplitude of terahertz radiation from the LT-InGaAs layers on the (411)A InP substrates exceeds that from similar layers formed on the (100) InP substrates by a factor of 3–5.

36 MATERIALS SCIENCE↗

Formation of Cu{sub 2}O and ZnO Crystal Layers by Magnetron Assisted Sputtering and Their Optical Characterization

Copper (I) oxide and zinc oxide films are formed on silicon and glassy quartz substrates by magnetron assisted sputtering. The thickness of the films is tens and hundreds of nanometers. The films are grown at different substrate temperatures and different oxygen pressures in the working chamber. The film samples are studied by the X-ray diffraction technique, scanning electron microscopy, and optical methods. It is established that an increase in the substrate temperature yields a change in the surface morphology of copper (I) oxide films towards the formation of well-pronounced crystallites. The reflectance and Raman spectra suggest that the quality of such films is close to that of bulk Cu{sub 2}O crystals produced by the oxidation of copper. As concerns ZnO films, an increase in the substrate temperature and an increase in the partial oxygen pressure make it possible to produce films, for which a sharp exciton structure is observed in the reflectance spectra and the emission of excitons bound at donors is observed in the luminescence spectra.

36 MATERIALS SCIENCE↗

Effect of Oxygen Flow Rate on Structural, Electrical and Optical Properties of Zinc Aluminum Oxide Thin Films Deposited by DC Magnetron Sputtering

Zinc Aluminum Oxide thin films were deposited on glass substrates by reactive DC magnetron sputtering method by varying oxygen flow rates from 1 to 4 sccm. Glancing angle X-ray diffraction patterns ofzinc aluminum oxide thin films exhibits (0 0 2) peak with c-plane preferentially oriented parallel to the substrate. The surface morphology and elemental analysis of the films was observed by field emission scanning electron microscopy attached with energy dispersive X-ray analysis spectroscopy. An average optical transmittance of 83–90% is obtained for the films deposited at various oxygen flow rates. The optical band gap of the films increases from 3.41 to 3.53 eV with the increase of oxygen flow rate due to Burstein–Moss effect. The optical dispersion parameters such as dispersion energy (E{sub d}), oscillator energy (E{sub o}) and static refractive index (n{sub o}) were determined using the Wemple-DiDomenico (W-D) single oscillator model. The nonlinear optical parameters such as optical susceptibility (χ{sup (1)}), third order nonlinear optical susceptibility (χ{sup (3)}) and nonlinear refractive index (n{sub 2}) were also determined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Boson Peak Related to Ga Nanoclusters in AlGaN Layers Grown by Plasma-Assisted Molecular Beam Epitaxy at Ga-Rich Conditions

We report the results of systematic Raman spectroscopy studies of Al{sub x}Ga{sub 1 –x}N (x ~ 0.75) layers grown using plasma-assisted molecular beam epitaxy at various stoichiometric conditions and growth fluxes. The high-intensity asymmetric low-frequency peak obeying Bose statistics is discovered in Raman spectra of the layers grown by temperature-modulated epitaxy at strongly Ga-enriched conditions. Theoretical model is developed to explain the origin and the high intensity of the observed low-frequency peak, which is attributed to the presence of excessive metallic gallium in AlGaN layers and can be explained by vibrations of gallium clusters with a diameter of ~1 nm. The nature of the low-frequency peak is similar to that of the boson peak in glasses, which occupies the same frequency range in Raman spectra. We demonstrate the capabilities of Raman spectroscopy as an express and non-destructive technique for optimization of growth conditions of AlGaN layers to achieve simultaneously the atomically-smooth droplet-free surface morphology and the high structural quality.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Temperature Dependent Raman Spectroscopic Study of the Fe Doped La{sub 0.67}Sr{sub 0.33}MnO{sub 3} Prepared Using Ball Milling Method

Polycrystalline samples of La{sub 0.67}Sr{sub 0.33}Mn{sub 0.65}Fe{sub 0.35}O{sub 3} (LSMFO) were synthesized using the standard ball mill method with different calcination temperatures ranging from 800 to 1100°C for 7 h. The phase purity of these samples was confirmed using X-ray diffraction (XRD) patterns. All samples were found to have rhombohedral crystal structure with R 3-bar c space group. The lattice parameters, cell volume, bond angle and bond length have been obtained using the Rietveld refinement by FullProf software. The average crystallite size calculated using the Debye-Scherrer formula was found between 27 and 60 nm. Surface morphology of the prepared samples has been examined using a scanning electron microscope (SEM). SEM images show the formation of well-arranged grain sizes distributed from 240 to 400 nm, much larger than one estimated using the Scherrer formula. All tiny particles are highly agglomerated with the increasing temperature and porosity decreases with increasing temperature. An analysis of the frequency and peak broadening of Raman modes as a function of temperature clearly shows the significant temperature effect on the A{sub 1g} and E{sub g} modes of LSMFO. The shifts and broadening of the A{sub 1g} and E{sub g} modes are discussed in light of the oxygen sublattice distortion. Our study shows the reduction in distortion with increasing calcination temperature, which suggests a decrease in the JT effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Semiconductor Behavior and Room Temperature Ferromagnetism in e-Beam Evaporated Co/TiO{sub 2} Multilayer Thin Films

The Co/TiO{sub 2} multilayer thin films have been deposited by e-beam evaporation method on glass substrates in vacuum and annealed in air at 773 K for 1 h. The crystal structure, surface morphology, optical properties, electrical properties and magnetic properties of Co/TiO{sub 2} multilayer thin films have been systematically investigated. The results showed that the particle sizes were significantly reduced when the samples are annealed and the enlargement of particle size occurred when the samples thickness is increased. The spectroscopic analysis exhibited enhanced transmittance and higher optical band gap of annealed sample than the as-deposited one and it was decreased with sample thickness. The resistivity measurement confirmed resistivity decreament with temperature. Furthermore, by investigating the magnetic properties, room temperature ferromagnetism was observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

CuPt and CuPtRu Nanostructures for Ammonia Oxidation Reaction

Liquid fuels, such as methanol, ethanol, and ammonia, are attractive alternative to hydrogen for fuel cells due to their lower costs for storage and distribution. However, lack of sufficiently active catalysts for their oxidation reactions is a roadblock. Our previous study found that Pt 3 Cu nanodendrites yielded higher activity and durability than Pt nanoparticles for methanol oxidation reaction (MOR) in acid. In this study, we synthesized two types of nanostructures of CuPt and CuPtRu catalysts via seed-mediated growth of Pt and Ru on Cu and tested their performance for ammonia oxidation reaction (AOR) in alkaline solution. Unlike for MOR, the nanodendrites do not promote AOR activity - CuPt performs similar to Pt and CuPtRu is less active than Pt. Interestingly, the AOR peak current is increased by 64% on CuPt nanowires and 330% on CuPtRu nanowires as compared to Pt nanoparticles. These results suggest that AOR prefers extended surface on long nanowires, distinctly differing from MOR. This can be contributed to two factors: NH 3 oxidization to N 2 involves dimerization of two N-containing intermediates to form the N-N bond and diffusion batters for adsorbed intermediates are generally lower on terrace than at low-coordination sites. This demonstrated strong effect of surface morphology will be further studied and utilized in developing advanced AOR nanocatalysts.

25 ENERGY STORAGE↗

Electrochemical CO 2 Reduction on Oxide-Derived Cu Surface with Various Oxide Thicknesses

Here, cuprous oxide on copper foil electrodes prepared via electrochemical deposition and thermal annealing are investigated towards CO 2 electrochemical reduction at low overpotential. The thickness of the electrochemical deposited Cu 2 O was controlled by varying the constant-current deposition time. The surface morphology and roughness were examined with SEM and CV respectively. The electrode fabricated by cuprous oxide deposited for 20 min demonstrated the best faradic efficiency (7.02%) and specific activity (0.123 mA/cm 2 ) towards format/formic acid formation at -0.5 V vs. RHE in CO 2 saturated 0.5 M K 2 CO 3 among studied samples.

36 MATERIALS SCIENCE↗

Corrosion Electrochemistry of Chromium in Molten FLiNaK Salt at 600 °C

The manuscript revisits the corrosion behavior of pure Cr in molten FLiNaK salt at 600 °C from the perspective of corrosion electrochemistry. In this work, the potential-dependent, rate-limiting charge-transfer, and salt film-mediated mass-transport controlled regimes of Cr corrosion in FLiNaK at 600 °C are investigated. The kinetic and thermodynamic parameters that limit electrodissolution and the consideration of grain orientation on these regimes are elucidated. At low Cr(III) concentrations, the corrosion process is governed by charge transfer control at low overpotentials and is crystal orientation dependent. However, when Cr(III) concentrations are high or when there is a high overpotential, the formation of a metal fluoride salt film on the Cr surface shifts the kinetic behavior to be governed by mass transport control at all anodic potentials with a surface morphology controlled by salt film deposition location and identity. Evan’s diagrams were developed to consolidate and elucidate these observations. These findings were supported by an examination of the post-corrosion microstructure, X-ray diffraction of solidified salts, and thermo-kinetics analysis in each corrosion regime.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗