Search NASA⌕ Search

SEARCH · Search NASA

Results for “tensor methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Repulsive bound-atom pairs in an optical lattice with two-body interaction of nearest neighbors

Repulsively interacting particles in a periodic potential can form bound composite objects with long lifetimes, as has been observed experimentally [Winkler et al., Nature (London) 441, 853 (2006)]. In this paper, a complete two-particle solution of one-dimensional periodical potential was derived in a strong interaction regime, where the on-site approximation of a two-body interaction in the Bose-Hubbard model (BHM) is extended to include the interaction of nearest neighbors, which results in atom-pair hopping. The energy spectrum of the bound pair is drastically reshaped due to the pair-hopping term, and complex eigenenergy corresponding to metastable states is also found that has not been discovered in the usual BHM. When the absolute value of a center-of-mass quasimomentum wave vector is greater than a critical value (|K|>K{sub c}), two bound-pair solutions are found. Furthermore, the spatial and momentum distributions of the bound pair displays a crossover from dark to bright soliton-like solutions in the extended BHM. Our results reduce to that of the usual BHM in the weak interaction case.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Post-Newtonian limit of f(R) gravity in the harmonic gauge

A general analytic procedure is developed for the post-Newtonian limit of f(R) gravity with the metric approach in the Jordan frame by using the harmonic gauge condition. In a pure perturbative framework and by using the Green function method, a general scheme of solutions up to (v/c){sup 4} order is shown. Considering the Taylor expansion of a generic function f, it is possible to parametrize the solutions by derivatives of f. At Newtonian order, (v/c){sup 2}, the most important topics about the Gauss and Birkhoff theorems are discussed. The corrections to the 'standard' gravitational potential (tt component of the metric tensor) generated by an extended uniform mass ball-like source are calculated up to (v/c){sup 4} order. The corrections, Yukawa and oscillating-like, are found inside and outside the mass distribution. At last, when the limit f{yields}R is considered, the f(R) gravity converges in general relativity at the level of the Lagrangian, field equations, and their solutions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Remarks on turbulent constitutive relations

The paper demonstrates that the concept of turbulent constitutive relations can be used to construct general models for various turbulent correlations. Some of the Generalized Cayley-Hamilton formulas for relating tensor products of higher extension to tensor products of lower extension are introduced. The combination of dimensional analysis and invariant theory can lead to 'turbulent constitutive relations' (or general turbulence models) for, in principle, any turbulent correlations. As examples, the constitutive relations for Reynolds stresses and scalar fluxes are derived. The results are consistent with ones from Renormalization Group (RNG) theory and two-scale Direct-Interaction Approximation (DIA) method, but with a more general form.

Shih, Tsan-Hsing↗

TU-C-12A-07: Characterization of Longitudinal Reproducibility of Quantitative Diffusion Imaging Data Acquired with Four Different Protocols Using a Phantom

Purpose: To characterize and compare the longitudinal reproducibility of diffusion imaging data acquired with four different protocols using a phantom. Methods: The Diffusive Quantitative Imaging Phantom (DQIP) was constructed using fifteen cylindrical compartments within a larger compartment, filled with deionized water doped with CuSO4 and NaCl. The smaller compartments contained arrays of hexagonal or cylindrical glass capillaries of varying inner diameters, for differing restraint of water diffusion. The sensitivity of diffusion imaging metrics to signal-to-noise ratio (SNR) was probed by doping compartments with differing ratios of deuterium oxide to H2O. A cork phantom enclosure was constructed to increase thermal stability during scanning and a cork holder was made to reproduce scanner positioning. Four different protocols of DWI (diffusion weighted imaging) and DTI (Diffusion tensor imaging) imaging were assembled on a GE Excite HDx 3.0T MRI scanner to collect imaging data over 9-10 days. Data was processed with in-house software created in Matlab to obtain fractional anisotropy (FA) and apparent diffusion coefficient (ADC) values. Results: All DTI and DWI sequences showed good longitudinal stability of mean FA and ADC values per compartment, exhibiting low standard deviation ∼9%. A t-test was performed to compare mean FA values from the DTI clinical protocol to those of the DTI special protocol, indicating significantly different values in the majority of compartments. ANOVA performed on ADC values for all DTI and DWI sequences also showed significantly different values in a majority of compartments. Conclusion: This work has the potential for quantifying systemic variations between diffusion imaging sequences from different platforms. Characterization of DWI and DTI performance were done over four sequences with predictable results. This data suggests that the DQIP phantom may be a reliable method of monitoring day-to-day and scan-to-scan variation in diffusion imaging sequences from different platforms. Schott Glass North America and The Phantom Laboratory have donated materials and personnel time to this project.

60 APPLIED LIFE SCIENCES↗

Completely regular quantum stress tensor with w<-1

For many quantum field theory computations in cosmology it is not possible to use the flat space trick of obtaining full, interacting states by evolving free states over infinite times. State wave functionals must be specified at finite times and, although the free states suffice to obtain the lowest order effects, higher order corrections necessarily involve changes of the initial state. Failing to correctly change the initial state can result in effective field equations which diverge on the initial value surface, or which contain tedious sums of terms that redshift like inverse powers of the scale factor. In this paper we verify a conjecture from 2004 that the lowest order initial state correction can indeed absorb the initial value divergences and all the redshifting terms of the two-loop expectation value (in free, Bunch-Davies vacuum) of the stress tensor of a massless, minimally coupled scalar with a quartic self-interaction on a nondynamical de Sitter background.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Analytic formulae of the CMB bispectra generated from non-Gaussianity in the tensor and vector perturbations

We present a complete set of formulae for calculating the bispectra of CMB temperature and polarization anisotropies generated from non-Gaussianity in the vector and tensor mode perturbations. In the all-sky analysis, it is found that the bispectrum formulae for the tensor and vector-mode non-Gaussianity formally take complicated forms compared to the scalar mode one because the photon transfer functions in the tensor and vector modes depend on the azimuthal angle between the direction of the wave number vector of the photon's perturbation and that of the line of sight. We demonstrate that flat-sky approximations remove this difficulty because this kind of azimuthal angle dependence apparently vanishes in the flat-sky limit. Through the flat-sky analysis, we also find that the vector or tensor bispectrum of B-mode polarization vanishes in the squeezed limit, unless the cosmological parity is violated at the nonlinear level.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Energy conservative SBP discretizations of the acoustic wave equation in covariant form on staggered curvilinear grids

In this work, we develop a numerical method for solving the acoustic wave equation in covariant form on staggered curvilinear grids in an energy conserving manner. The use of a covariant basis decomposition leads to a rotationally invariant scheme that outperforms a Cartesian basis decomposition on rotated grids. The discretization is based on high order Summation-By-Parts (SBP) operators and preserves both symmetry and positive definiteness of the contravariant metric tensor. To improve accuracy and decrease computational cost, we also derive a modified discretization of the metric tensor that leads to a conditionally stable discretization. Bounds are derived that yield a point-wise condition that can be evaluated to check for stability of the modified discretization. This condition shows that the interpolation operators should be constructed such that their norm is close to one.

97 MATHEMATICS AND COMPUTING↗

Convolution Lagrangian perturbation theory for biased tracers beyond general relativity

We compare analytic predictions for real and Fourier space two-point statistics for biased tracers from a variety of Lagrangian perturbation theory approaches against those from state of the art N-body simulations in f(R) Hu-Sawicki and the nDGP braneworld modified gravity theories. We show that the novel physics of gravitational collapse in scalar tensor theories with the chameleon or the Vainshtein screening mechanism can be effectively factored in with bias parameters analytically predicted using the peak-background split formalism when updated to include the environmental sensitivity of modified gravity theories as well as changes to the halo mass function. Here, we demonstrate that convolution Lagrangian perturbation theory (CLPT) and standard perturbation theory (SPT) approaches provide accurate analytic methods to predict the correlation function and power spectra, respectively, for biased tracers in modified gravity models and are able to characterize both the baryon acoustic oscillation, power-law, and small scale regimes needed for upcoming galaxy surveys such as DESI, Euclid, LSST and WFIRST.

79 ASTRONOMY AND ASTROPHYSICS↗

Residual strain orientation in rolled titanium determined with synchrotron X-ray Laue microdiffraction

Previously, synchrotron X-ray Laue microdiffraction has been used to measure the magnitudes of residual strain in materials. Recently the method was advanced to determine the orientation of the strain ellipsoid and applied to naturally deformed quartzites; however, the deformation history of these quartzites is ambiguous due to their natural origin. Here, in this study, synchrotron X-ray Laue microdiffraction (µXRD) is used to measure the residual strain for the first time in a sample with known stress history, rolled titanium. A deviatoric strain tensor is calculated from each Laue diffraction image collected with two µXRD scans of a rolled titanium sheet in different sample orientations. The principal strain axes are calculated using an eigen decomposition of the deviatoric strain tensors. The results show that the principal axis of compression is aligned with the normal direction of the titanium sheet, and the principal axis of extension is aligned with the rolling direction. Pole figures are used to represent the 3D distribution of residual strain axes.

36 MATERIALS SCIENCE↗

Statistical analysis of near-wall structures in turbulent channel flow

The two-point correlation tensor is used to analyze near-wall structures in turbulent channel flow. Simulation results have been utilized to obtain the correlation tensor with sufficient spatial resolution to permit accurate differentiation for computing the vorticity correlation, and the resolution of sharp features such as the shear layer and its corresponding region of spanwise vorticity. Proper orthogonal decomposition and stochastic estimation were observed to yield similar results when appropriate conditions were employed for the estimation. Resulting structures were such that they would be detected by standard conditional sampling methods. The results of decomposing the vorticity field and the velocity field were significantly different, indicating that if a coherent structure is found that dominates the velocity fields, the curl of that velocity structure will not dominate the vorticity field.

Moser, Robert D.↗

Halo phenomenon in finite many-fermion systems: Atom-positron complexes and large-scale study of atomic nuclei

The analysis method proposed in V. Rotival and T. Duguet [Phys. Rev. C 79, 054308 (2009)] is applied to characterize halo properties in finite many-fermion systems. First, the versatility of the method is highlighted by applying it to light- and medium-mass nuclei as well as to atom-positron and ion-positronium complexes. Second, the dependence of nuclear halo properties on the characteristics of the energy-density functional used in self-consistent Hartree-Fock-Bogoliubov calculations is studied. We focus in particular on the influence of (i) the scheme used to regularize/renormalize the ultraviolet divergence of the local pairing functional, (ii) the angular-momentum cutoff in the single-particle basis, as well as (iii) the isoscalar effective mass, (iv) saturation density, and (v) tensor terms characterizing the particle-hole part of the energy functional. It is found that (a) the low-density behavior of the pairing functional and the regularization/renormalization scheme must be chosen coherently and with care to provide meaningful predictions, (b) the impact of pairing correlations on halo properties is significant and is the result of two competing effects, (c) the detailed characteristics of the pairing functional has, however, only little importance, and (d) halo properties depend significantly on any ingredient of the energy-density functional that influences the location of single-particle levels; i.e., the effective mass, the tensor terms, and the saturation density of nuclear matter. The latter dependencies give insights to how experimental data on medium-mass drip-line nuclei can be used in the distant future to constrain some characteristics of the nuclear energy-density functional. Last but not least, large-scale predictions of halos among all spherical even-even nuclei are performed using specific sets of particle-hole and particle-particle energy functionals. It is shown that halos in the ground state of medium-mass nuclei will be found only at the very limit of neutron stability and for a limited number of elements.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Certifying almost all quantum states with few single-qubit measurements

Certifying that an n -qubit state synthesized in the laboratory is close to a given target state is a fundamental task in quantum information science. However, existing rigorous protocols applicable to general target states have potentially prohibitive resource requirements in the form of either deep quantum circuits or exponentially many single-qubit measurements. Here we prove that almost all n -qubit target states, including those with exponential circuit complexity, can be certified from only O ( n 2 ) single-qubit measurements. Given access to the target state’s amplitudes, our protocol requires only O ( n 3 ) classical computation. This result is established by a technique that relates certification to the mixing time of a random walk. Our protocol has applications for benchmarking quantum systems, for optimizing quantum circuits to generate a desired target state and for learning and verifying neural networks, tensor networks and various other representations of quantum states using only single-qubit measurements. We show that such verified representations can be used to efficiently predict highly non-local properties of a synthesized state that would otherwise require an exponential number of measurements on the state. We demonstrate these applications in numerical experiments with up to 120 qubits and observe an advantage over existing methods such as cross-entropy benchmarking.

information theory and computation↗

Planck 2018 results

We report on the implications for cosmic inflation of the 2018 release of the Planck cosmic microwave background (CMB) anisotropy measurements. The results are fully consistent with those reported using the data from the two previous Planck cosmological releases, but have smaller uncertainties thanks to improvements in the characterization of polarization at low and high multipoles. Planck temperature, polarization, and lensing data determine the spectral index of scalar perturbations to be n s = 0.9649 ± 0.0042 at 68% CL. We find no evidence for a scale dependence of n s , either as a running or as a running of the running. The Universe is found to be consistent with spatial flatness with a precision of 0.4% at 95% CL by combining Planck with a compilation of baryon acoustic oscillation data. The Planck 95% CL upper limit on the tensor-to-scalar ratio, r0.002 < 0.10, is further tightened by combining with the BICEP2/Keck Array BK15 data to obtain r 0.002 < 0.056. In the framework of standard single-field inflationary models with Einstein gravity, these results imply that: (a) the predictions of slow-roll models with a concave potential, V"(Φ) < 0, are increasingly favoured by the data; and (b) based on two different methods for reconstructing the inflaton potential, we find no evidence for dynamics beyond slow roll. Three different methods for the non-parametric reconstruction of the primordial power spectrum consistently confirm a pure power law in the range of comoving scales 0.005 Mpc -1 ≲ k ≲ 0.2 Mpc -1 . A complementary analysis also finds no evidence for theoretically motivated parameterized features in the Planck power spectra. For the case of oscillatory features that are logarithmic or linear in k, this result is further strengthened by a new combined analysis including the Planck bispectrum data. The new Planck polarization data provide a stringent test of the adiabaticity of the initial conditions for the cosmological fluctuations. In correlated, mixed adiabatic and isocurvature models, the non-adiabatic contribution to the observed CMB temperature variance is constrained to 1.3%, 1.7%, and 1.7% at 95% CL for cold dark matter, neutrino density, and neutrino velocity, respectively. Planck power spectra plus lensing set constraints on the amplitude of compensated cold dark matter-baryon isocurvature perturbations that are consistent with current complementary measurements. The polarization data also provide improved constraints on inflationary models that predict a small statistically anisotropic quadupolar modulation of the primordial fluctuations. However, the polarization data do not support physical models for a scale-dependent dipolar modulation. All these findings support the key predictions of the standard single-field inflationary models, which will be further tested by future cosmological observations.

79 ASTRONOMY AND ASTROPHYSICS↗

DECaNT: Simulation tool for diffusion of excitons in carbon nanotube films

In this work, we present the numerical tool DECaNT (Diffusion of Excitons in Carbon NanoTubes) that simulates exciton transport in thin films of carbon nanotubes. Through a mesh of nanotubes generated using the Bullet Physics C++ library, excitons move according to an ensemble Monte Carlo algorithm, with the scattering rates that account for tube chirality, orientation, and distance. We calculate the diffusion tensor from the position–position correlation functions and analyze its anisotropy and dependence on the film composition, morphology, and defect density.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Stress inside the pion in holographic light-front QCD

In this work, we propose a method to compute the gravitational form factor D ( Q 2 ) in holographic QCD by exploiting the remarkable correspondence between semiclassical light-front QCD and semiclassical field theories in wrapped spacetime in five dimensions. The use of light-front holography bridges physics at large Q 2 as attained in light-front QCD and physics at small Q 2 where the coupling to scalar and tensor fields, e.g. glueballs, are dominant. As an application, we compute the D -term for the pion and compare the results with recent lattice simulations. Published by the American Physical Society 2024

Astronomy & Astrophysics↗

Strangeness in the nucleon from lattice QCD

We study the strangeness contribution to nucleon matrix elements using Nf = 2 + 1 dynamical clover fermion configurations generated by the CP-PACS/JLQCD collaboration. In order to eval?uate the disconnected insertion (DI), we use the Z(4) stochastic method, along with unbiased subtraction from the hopping parameter expansion which reduces the off-diagonal noises in the stochastic method. Furthermore, we find that using many nucleon sources for each configuration is effective in improving the signal. Our results for the quark contribution to the first moment hxiq in the DI, and the strangeness magnetic moment show that the statistical errors are under control with these techniques. We also study the gluonic contribution to the nucleon using the overlap operator to construct the gauge field tensor, Fµ?. The application to the calculation of first moment, hxiG, gives a good signal in quenched lattice QCD.

Doi, Takumi↗

Do We Know How to Model Reionization?

I compare the power spectra of the radiation fields from two recent sets of fully-coupled simulations that model cosmic reionization: “Cosmic Reionization On Computers” (CROC) and “Thesan”. While both simulations have similar power spectra of the radiation sources, the power spectra of the photoionization rate are significantly different at the same values of cosmic time or the same values of the mean neutral hydrogen fraction. However, the power spectra of the photoionization rate can be matched at large scales for the two simulations when the matching snapshots are allowed to vary independently. I.e., on large scales, the clustering of the radiation field in two simulations evolves similarly, but the exact timing of this evolution is different in different simulations and is not parameterized by an easily interpretable physical quantity like the mean neutral fraction or the mean free path. On small scales, large differences are present and remain partially unexplained. Both CROC and Thesan use the Variable Eddington Tensor approximation for modeling radiative transfer, but adopt different closure relations (optically thin OTVET versus M1). The role of this key difference is tested by using smaller simulations with a new cosmological simulation code that implements both closure relations in a controlled environment (the same hydro, cooling, and gravity solvers and the star formation recipe). In these controlled tests, both the M1 closure and the OTVET ansatz follow the expected behavior from a simple analytical approximation, demonstrating that the differences in the 2-point function of the radiation field induced by the choice of the Eddington tensor are not dominant.

79 ASTRONOMY AND ASTROPHYSICS↗

Mechanical signals in plant development: a new method for single cell studies

Cell division, which is critical to plant development and morphology, requires the orchestration of hundreds of intracellular processes. In the end, however, cells must make critical decisions, based on a discrete set of mechanical signals such as stress, strain, and shear, to divide in such a way that they will survive the mechanical loads generated by turgor pressure and cell enlargement within the growing tissues. Here we report on a method whereby tobacco protoplasts swirled into a 1.5% agarose entrapment medium will survive and divide. The application of a controlled mechanical load to agarose blocks containing protoplasts orients the primary division plane of the embedded cells. Photoelastic analysis of the agarose entrapment medium can identify the lines of principal stress within the agarose, confirming the hypothesis that cells divide either parallel or perpendicular to the principal stress tensors. The coincidence between the orientation of the new division wall and the orientation of the principal stress tensors suggests that the perception of mechanical stress is a characteristic of individual plant cells. The ability of a cell to determine a shear-free orientation for a new partition wall may be related to the applied load through the deformation of the matrix material. In an isotropic matrix a uniaxial load will produce a rotationally symmetric strain field, which will define a shear-free plane. Where high stress intensities combine with the loading geometry to produce multiaxial loads there will be no axis of rotational symmetry and hence no shear free plane. This suggests that two mechanisms may be orienting the division plane, one a mechanism that works in rotationally symmetrical fields, yielding divisions perpendicular to the compressive tensor, parallel to the long axis of the cell, and one in asymmetric fields, yielding divisions parallel to the short axis of the cell and the compressive tensor.

NASA Discipline Number 40-50↗